Highly efficient gold nanorods assisted laser phototherapy for rapid treatment on mice wound infected by pathogenic bacteria

Role of nanomaterials in deactivating multiple drug resistance efflux pumps - A review

The changes in lifestyle and living conditions have affected not only humans but also microorganisms. As man invents new drugs and therapies, pathogens alter themselves to survive and thrive. Multiple drug resistance (MDR) is the talk of the town for decades now. Many generations of medications have been termed useless as MDR rises among the infectious population. The surge in nanotechnology has brought a new hope in reducing this aspect of resistance in pathogens. It has been observed in several laboratory-based studies that the use of nanoparticles had a synergistic effect on the antibiotic being administered to the pathogen; several resistant strains scummed to the stress created by the nanoparticles and became susceptible to the drug. The major cause of resistance to date is the efflux system, which makes the latest generation of antibiotics ineffective without reaching the target site. If species-specific nanomaterials are used to control the activity of efflux pumps, it could revolutionize the field of medicine and make the previous generation resistant medications active once again. Therefore, the current study was devised to assess and review nanoparticles' role on efflux systems and discuss how specialized particles can be designed towards an infectious host's particular drug ejection systems.

Nanomaterials for application in wound Healing: current state-of-the-art and future perspectives

Nanoparticles are the gateway to the new era in drug delivery of biocompatible agents. Several products have emerged from nanomaterials in quest of developing practical wound healing dressings that are nonantigenic, antishear stress, and gas-exchange permeable. Numerous studies have isolated and characterised various wound healing nanomaterials and nanoproducts. The electrospinning of natural and synthetic materials produces fine products that can be mixed with other wound healing medications and herbs. Various produced nanomaterials are highly influential in wound healing experimental models and can be used commercially as well. This article reviewed the current state-of-the-art and briefly specified the future concerns regarding the different systems of nanomaterials in wound healing (i.e., inorganic nanomaterials, organic and hybrid nanomaterials, and nanofibers). This review may be a comprehensive guidance to help health care professionals identify the proper wound healing materials to avoid the usual wound complications.

Exploitation of Antimicrobial Nanoparticles and Their Applications in Biomedical Engineering

Antibiotic resistance is a major threat to public health, which contributes largely to increased mortality rates and costs in hospitals. The severity and widespread nature of antibiotic resistance result in limited treatments to effectively combat antibiotic-resistant pathogens. Nanoparticles have different or enhanced properties in contrast to their bulk material, including antimicrobial efficacy towards a broad range of microorganisms. Their beneficial properties can be utilised in various bioengineering technologies. Thus, antimicrobial nanoparticles may provide an alternative to challenge antibiotic resistance. Currently, nanoparticles have been incorporated into materials, such as fibres, glass and paints. However, more research is required to elucidate the mechanisms of action fully and to advance biomedical applications further. This paper reviews the antimicrobial efficacies and the intrinsic properties of different metallic nanoparticles, their potential mechanisms of action against certain types of harmful pathogens and how these properties may be utilised in biomedical and healthcare products with the aim to reduce cross contaminations, disease transmissions and usage of antibiotics.

Selective Laser Efficiency of Green-Synthesized Silver Nanoparticles by Aloe arborescens and Its Wound Healing Activities in Normal Wounded and Diabetic Wounded Fibroblast Cells: In vitro Studies

Introduction

Silver nanoparticles (AgNPs) have been extensively used in wound healing applications owing to their valuable physicochemical and biological properties. The main objective of this study was to evaluate the combined effects of green-synthesized silver nanoparticles (G-AgNPs) and photobiomodulation (PBM; laser irradiation at 830 nm with 5 J/cm²) in normal wounded and diabetic wounded fibroblast cells (WS1).

Methods

The combined effect of G-AgNPs and PBM was studied by various in vitro wound healing studies including cell morphology, cell migration rate and percentage wound closure, cell viability, cell proliferation, and filamentous (F)-actin and nuclear morphology staining.

Results

Cell viability results revealed good cellular compatibility of G-AgNPs to WS1 cells. The combined therapy of G-AgNPs and PBM demonstrated promising results to achieve progressive migration and wound closure in both normal wounded and diabetic wounded cell models. G-AgNPs alone and in combination with PBM had no negative effect on cell viability and proliferation, and there was an increase in cell migration.

Conclusion

Overall, these findings demonstrate that the combined treatment of G-AgNPs and PBM does not display any adverse effects on wound healing processes in both normal wounded and diabetic wounded cell models.

Plasmonic photothermal microneedle arrays and single needles for minimally-invasive deep in-skin hyperthermia

We report, for the first time, crosslinked polymeric microneedle (MN) arrays and single needles (2 mm and 4.5 mm length) coated with gold nanorods (GnRs) to induce deep hyperthermia in a 3 mm-thickness skin model upon near infrared (NIR) laser irradiation.

An improvement in acute wound healing in mice by the combined application of photobiomodulation and curcumin-loaded iron particles

Here, we examined the combined effect of pulse wave photobiomodulation (PBM) with curcumin-loaded superparamagnetic iron oxide (Fe₃O₄) nanoparticles (curcumin), in an experimental mouse model of acute skin wound. Thirty male adult mice were randomly allocated into 5 groups. Group 1 was served as the control group. Group 2 was a placebo and received distilled water, as a carrier of curcumin. Group 3 received laser (890 nm, 80 Hz, 0.2 J/cm²). Group 4 received curcumin by taking four injections around the wound. Group 5 received laser + curcumin. One full-thickness excisional round wound was made on the back of all the mice. On days 0, 4, 7, and 14, bacterial flora, wound surface area, and tensile strength were examined and microbiological examinations were performed. In case of wound closure, the two-way ANOVA shows that wound surface area of entire groups decreased progressively. However, the decrease in laser + curcumin and laser groups, and especially data from laser + curcumin group were statistically more significant, in comparison with the other groups (F statistics = 2.28, sig = 0.019). In terms of microbiology, the two-way ANOVA showed that laser, and laser + curcumin groups have statistically a lower bacterial count than the curcumin, control, and carrier groups (F statistics = 35, sig = 0 = 000). Finally, the one-way ANOVA showed that laser + curcumin, curcumin, and curcumin significantly increased wound strength, compared to the control and carrier groups. Furthermore, laser + curcumin significantly increased wound strength, compared to the control, laser, and curcumin groups (LSD test, p = 0.003, p = 0.002, and p = 0.005, respectively). In conclusion, curcumin nanoparticles, pulse wave laser, and pulse wave laser + curcumin nanoparticles accelerate wound healing, through a significant increase in wound closure rate, as well as wound strength, and a significant decrease in Staphylococcus aureus counts. Furthermore, the statistical analysis of our data suggests that the combined treatment of pulse wave laser + curcumin nanoparticles enhances the wound closure rate, and wound strength, compared to the laser and curcumin nanoparticles alone.

Synthesis of photothermal nanocomposites and their application to antibacterial assays

In this work, we report a novel gold nanorod (AuNR)-based nanocomposite that shows strong binding to bacterium and high antibacterial efficiency. The AuNRs were used as a photothermal material to transform near-infrared radiation (NIR) into heat. We selected poly (acrylic acid) to modify the surface of the AuNRs based on a simple self-assembly method. After conjugation of the bacterium-binding molecule vancomycin, the nanocomposites were capable of efficiently gathering on the cell walls of bacteria. The nanocomposites exhibited a high bacterial inhibition capability owing to NIR-induced heat generation in situ. Therefore, the prepared photothermal nanocomposites show great potential for use in antibacterial assays.

The functionalization of natural polymer-coated gold nanoparticles to carry bFGF to promote tissue regeneration

A schematic of the preparation of natural polymer-coated AuNPs for monitoring tissue regeneration stimulated by bFGF.

Highly effective Cu/Zn-carbon micro/nanofiber-polymer nanocomposite-based wound dressing biomaterial against the P. aeruginosa multi- and extensively drug-resistant strains

Pseudomonas aeruginosa (P. aeruginosa) is the most prevalent bacteria in the infections caused by burn, surgery, and traumatic injuries. Emergence of the P. aeruginosa bacterial resistance against various clinical drugs for wound treatment is the major concern nowadays. The present study describes the synthesis of the polyvinyl alcohol (PVA) and cellulose acetate phthalate (CAP) polymeric composite film (~0.2mm thickness) reinforced with the Cu/Zn bimetal-dispersed activated carbon micro/nanofiber (ACF/CNF), as a wound dressing material. The focus is on determining the efficacy of the prepared biomaterial against the multi and extensively drug-resistant P. aeruginosa strains isolated from the burning, surgical, and traumatic injury-wounds. The primary synthesis steps for the biomaterial include the mixing of a blend of CAP powder and the asymmetrically distributed Cu/Zn bimetals in ACF/CNF, into the polymerization reaction mixture of PVA. Biochemical tests showed that the prepared composite material significantly enhanced the in-vitro blood clotting rate, platelet aggregation, and macrophage cell proliferation, indicating the suitability of the material as a fast wound healer. The antibacterial tests performed against the P. aeruginosa strains showed that the material effectively suppressed the bacterial growth, with the bimetal nanoparticles dispersed in the material serving as an antibacterial agent. The PVA/CAP polymer composite served as an encapsulating agent providing a slow release of the nanoparticles, besides increasing the hemostatic properties of the biomaterial. The ACF/CNF served as a support to the dispersed bimetal nanoparticles, which also provided a mechanical and thermal stability to the material. Experimentally demonstrated to be biocompatible, the prepared metal-carbon-polymer nanocomposite in this study is an effective dressing material for the P. aeruginosa-infected wounds.

Tellurium platinate nanowires for photothermal therapy of cancer cells

Among the most celebrated modes of cancer treatment, photothermal therapy has been the most promising tool over the past few years.