Synthesis and application of metal-containing ZSM-5 for the selective catalytic reduction of NO x with NH 3

Acceleration of Zeolite Crystallization: Current Status, Mechanisms, and Perspectives

Zeolites are important classes of crystalline materials and possess well-defined channels and cages with molecular dimensions. They have been extensively employed as heterogeneous catalysts and gas adsorbents due to their relatively large specific surface areas, high pore volumes, compositional flexibility, definite acidity, and hydrothermal stability. The zeolite synthesis normally undergoes high-temperature hydrothermal treatments with a relatively long crystallization time, which exhibits low synthesis efficiency and high energy consumption. Various strategies, e.g., modulation of the synthesis gel compositions, employment of special silica/aluminum sources, addition of seeds, fluoride, hydroxyl (·OH) free radical initiators, and organic additives, regulation of the crystallization conditions, development of new approaches, etc., have been developed to overcome these obstacles. And, these achievements make prominent contributions to the topic of acceleration of the zeolite crystallization and promote the fundamental understanding of the zeolite formation mechanism. However, there is a lack of the comprehensive summary and analysis on them. Herein, we provide an overview of the recent achievements, highlight the significant progress in the past decades on the developments of novel and remarkable strategies to accelerate the crystallization of zeolites, and basically divide them into three main types, i.e., chemical methods, physical methods, and the derived new approaches. The principles/acceleration mechanisms, effectiveness, versatility, and degree of reality for the corresponding approaches are thoroughly discussed and summarized. Finally, the rational design of the prospective strategies for the fast synthesis of zeolites is commented on and envisioned. The information gathered here is expected to provide solid guidance for developing a more effective route to improve the zeolite crystallization and obtain the functional zeolite-based materials with more shortened durations and lowered cost and further promote their applications.

The investigation of the NH3-SCR performance of a copper-based AEI-CHA intergrown zeolite catalyst

This work prepared an ISAPO-34/SAPO-18 intergrown zeolite using phosphate organoamine as the structure guiding agent. Physical-chemical characterizations by XRD, SEM, TG, and BET showed that the SAPO-34/SAPO-18 presents a cross-stacked cubic block-like microscopic morphology, with characteristic diffusive diffraction peaks at 2θ = 16–18° and 30–33° and a specific surface area of 557 m2 g−1. The series of copper-based catalysts prepared from SAPO-34/SAPO-18 showed a shift of the active temperature window to a lower temperature with increasing copper content. Moreover, the Brønsted acid site decreased significantly due to copper ion exchange and zeolite structure framework damage. Among them, the 1.2 wt% sample showed the widest active temperature window, with a T90 range of 175–435°C. After low-temperature hydrothermal aging treatment, the zeolite structure was eroded and the catalyst activity deteriorated significantly.

Conversion of Harmful Fly Ash Residue to Zeolites: Innovative Processes Focusing on Maximum Activation, Extraction, and Utilization of Aluminosilicate

Reuse of the solid residue from coal fly ash alumina extraction (FAAE) by acid leaching is problematic. Conversion of this solid residue into aluminum-rich zeolite (13X) and silicon-rich zeolite (ZSM-5) was investigated in this research. The FAAE residue was activated by alkali roasting with Na₂CO₃ powder (110% mass fraction) at 890 °C for 60 min. Silicon and aluminum were mainly present as two mineral phases, Na₂SiO₃ and NaAlSiO₄, respectively, in the product obtained after roasting. The roasted product was dissolved in water (liquid/solid ratio of 2) after 20 min at 100 °C. The water-leaching liquor was investigated for total conversion to aluminosilicate zeolites without external aluminum or silicon addition. Hydrothermal synthesis of aluminum-rich zeolite 13X was successful after fine tuning of the conditions, although the filtrate had an unusually high SiO₂/Al₂O₃ molar ratio. Production of 13X consumed a large amount of aluminum, which increased the Si/Al ratio to a level suitable for synthesis of ZSM-5. The synthesis of ZSM-5 from the mother liquor of 13X was proved feasible. The FAAE residue was transformed into high-value zeolite products by nearly 100%. Additionally, the tail liquid of this process, mainly containing Na₂CO₃, was completely recycled. This process could be used to realize high-efficiency and high-value utilization of similar aluminosilicate solid wastes.

ZSM-5 functionalized in situ with manganese ions for the catalytic oxidation of cyclohexane

We report the preparation of transition metal-containing ZSM-5 catalysts, which were active and selective for cyclohexane oxidation.