Insight into emerging applications of forward osmosis systems

Design Strategies for Forward Osmosis Membrane Substrates with Low Structural Parameters-A Review

This article reviews the many innovative strategies that have been developed to specifically design the support layers of forward osmosis (FO) membranes. Forward osmosis (FO) is one of the most viable separation technologies to treat hypersaline wastewater, but its successful deployment requires the development of new membrane materials beyond existing desalination membranes. Specifically, designing the FO membrane support layers requires new engineering techniques to minimize the internal concentration polarization (ICP) effects encountered in cases of FO. In this paper, we have reviewed several such techniques developed by different research groups and summarized the membrane transport properties corresponding to each approach. An important transport parameter that helps to compare the various approaches is the so-called structural parameter (S-value); a low S-value typically corresponds to low ICP. Strategies such as electrospinning, solvent casting, and hollow fiber spinning, have been developed by prior researchers-all of them aimed at lowering this S-value. We also reviewed the quantitative methods described in the literature, to evaluate the separation properties of FO membranes. Lastly, we have highlighted some key research gaps, and provided suggestions for potential strategies that researchers could adopt to enable easy comparison of FO membranes.

Forward Osmosis Membranes: The Significant Roles of Selective Layer

Forward osmosis (FO) is a promising separation technology to overcome the challenges of pressure-driven membrane processes. The FO process has demonstrated profound advantages in treating feeds with high salinity and viscosity in applications such as brine treatment and food processing. This review discusses the advancement of FO membranes and the key membrane properties that are important in real applications. The membrane substrates have been the focus of the majority of FO membrane studies to reduce internal concentration polarization. However, the separation layer is critical in selecting the suitable FO membranes as the feed solute rejection and draw solute back diffusion are important considerations in designing large-scale FO processes. In this review, emphasis is placed on developing FO membrane selective layers with a high selectivity. The effects of porous FO substrates in synthesizing high-performance polyamide selective layer and strategies to overcome the substrate constraints are discussed. The role of interlayer in selective layer synthesis and the benefits of nanomaterial incorporation will also be reviewed.

Preparation of a thin-film nanocomposite forward osmosis membrane for the removal of organic micro-pollutants from aqueous solutions

In this study, a thin-film nanocomposite forward osmosis (TFN FO) membrane was synthesized. The properties and structures of membranes were evaluated for the removal of three organic micro-pollutants from synthetic and real industrial wastewater samples. Laboratory scale fabrication thin-film nanocomposite forward osmosis (FO) membranes composed of a support layer and an active layer. The former was constructed by adding different weight ratios of polyethylene glycol 400 (PEG-400) (0-8 wt.%), polysulfone (PSf), and 1-methyl, 2-pyrrolidone via the phase inversion process, while the latter was synthesized by the incorporation of different weight ratios of graphene oxide (GO) (0-0.012 wt.%), M-phenylenediamine, and 1, 3, 5-benzene trichloride into polyamide layer through the interfacial polymerization reaction. In comparison with thin-film composite (TFC) membranes, the TFN membranes revealed higher hydrophilicity, porosity, water permeability, water flux and salt rejection and lower internal concentration polarization (ICP), reverse salt flux and specific reverse salt flux. The TFN membrane containing 0.008% GO in the active layer and 4% PEG 400 in the support layer exhibited maximum water flux (34.3 LMH) and rejection rate of benzene, phenol and toluene (97%, 84%, and 91%, respectively). The results revealed that the TFN-FO membranes possess a promising potential to improve the water flux and wastewater treatment.

Forward Osmosis: A Critical Review

The use of forward osmosis (FO) for water purification purposes has gained extensive attention in recent years. In this review, we first discuss the advantages, challenges and various applications of FO, as well as the challenges in selecting the proper draw solution for FO, after which we focus on transport limitations in FO processes. Despite recent advances in membrane development for FO, there is still room for improvement of its selective layer and support. For many applications spiral wound membrane will not suffice. Furthermore, a defect-free selective layer is a prerequisite for FO membranes to ensure low solute passage, while a support with low internal concentration polarization is necessary for a high water flux. Due to challenges affiliated to interfacial polymerization (IP) on non-planar geometries, we discuss alternative approaches to IP to form the selective layer. We also explain that, when provided with a defect-free selective layer with good rejection, the membrane support has a dominant influence on the performance of an FO membrane, which can be estimated by the structural parameter (S). We emphasize the necessity of finding a new method to determine S, but also that predominantly the thickness of the support is the major parameter that needs to be optimized.

Forward osmosis membrane processes for wastewater bioremediation: Research needs

Increasing research and development works have been made to develop forward osmosis (FO) processes as a cost-effective substitute for energy intensive water vacuum suction facility in submerged membrane bioreactor (MBR) applications. Perceived to be a spontaneous water driven process without external applied pressures, the FO has been applied in lab and pilot scales for wastewater bioremediation. This paper reviewed the state-of-the-art developments on the FO unit, the process, and ways of enhancing process performance, particularly on the aspects of flux enhancement, flow resistance reduction, and draw solute with low reverse salt diffusion, which are relevant to enhanced osmotic MBR performance. The perspective to realize the use of FO processes in revision of currently existing energy intensive osmotic MBR processes is discussed with research needs being highlighted.