A comparative study of adsorption and removal of organophosphorus insecticides from aqueous solution by Zr-based MOFs

Selective dual-mode detection of glyphosate facilitated by iron organic frameworks nanozymes

To satisfy the public's urgent demand for food safety and protect the ecological environment, sensitive detection of glyphosate holds paramount importance. Here, we discovered that glyphosate can engage in specific interactions with iron organic frameworks (Fe-MOFs) nanozymes, enabling a selective detection of glyphosate. Based on this principle, an innovative colorimetric and fluorescent dual-mode detection approach was devised. Specifically, Fe-MOFs were synthesized at room temperature, exhibiting remarkable peroxidase-mimic activity. These nanozymes catalyze the conversion of colorless and fluorescent 3,3',5,5'-Tetramethylbenzidine (TMB) into blue oxidized and nonfluorescent TMB (oxTMB) in the presence of H2O2. However, the introduction of glyphosate disrupts this process by interacting with Fe-MOFs, significantly inhibiting the catalytic activity of Fe-MOFs through both physical (electrostatic and hydrogen bonding) and chemical interactions. This suppression further hindered the conversion of TMB to oxTMB, resulting in a reduction in absorbance and a corresponding enhancement in fluorescence. The method offers a colorimetric and fluorescence dual-mode detection capability with enhanced applicability. Notably, our approach avoids complex material modifications and is more stable and cost-effective than the traditional enzyme inhibition methods. This innovative detection technique holds immense potential for practical applications and provides a fresh perspective for the detection of pesticide residues.

Single-atom Zr-doped CoOOH with enhanced electrical conductivity as a signal amplifier and detection probe for the indirect non-enzymatic electrochemical determination of malathion in foods

Herein, a novel electrochemical sensor based on zirconium-doped cobalt oxyhydroxide (ZrCoOOH) was proposed for highly sensitive non-enzymatic determination of malathion (MAL). The doping of Zr can improve the electrical conductivity of CoOOH, of which the transfer resistance was reduced from 241.1 Ω to 140.2 Ω. Furthermore, the X-ray photoelectron spectroscopy confirmed that part of Co2+ was converted to Co3+ due to the introduction of Zr. The Co3+ in ZrCoOOH could react with MAL to form Co2+, which enhanced the electrooxidation current of Co2+. Therefore, the peak current of Co2+ was served as detection probe for MAL. Under optimal conditions, the developed sensor established the linear relationship for MAL in the concentration range of 0.001-10.0 μM with a low limit of detection (0.64 nM). The constructed sensor was employed to detect MAL in food samples (peach, kiwi fruit, spinach and tomato), verifying the accuracy and practicability of the sensor.

Bioremediation strategies against pesticides: an overview of current knowledge and innovations

Pesticides pose significant risks to both human health, such as cancer, neurological disorders, and endocrine disruption, and ecosystems, through the destruction of beneficial insects, contamination of soil and water, and impact on non-target species. In the face of escalating pesticide pollution, there is an urgent need for multifaceted approaches to address the issue. Bioremediation emerges as a potent tool in the environmental pollution mitigation arsenal. Ideally aiming for the complete decomposition of pesticides into harmless molecules, bioremediation encompasses diverse approaches - from bioabsorption, bioadsorption, and biotransformation using enzymes and nanoenzymes to comprehensive degradation facilitated by microorganisms such as bacteria, fungi, macro- and microalgae, or phytoremediation. Exploring nature's biodiversity offers a promising avenue to find solutions to this pressing human-induced problem. The acceleration of biodegradation necessitates identifying and developing efficient organisms, achieved through bioprospection and targeted modifications. Specific strategies to enhance process efficiency and throughput include optimizing biomass production, strategic inoculation in diverse environments, and employing bioreactor systems for processing heavily contaminated waters or soils. This comprehensive review presents various bioremediation approaches, emphasizing the importance of microorganisms' exploration and new technologies development, including current innovations and patents to effectively combat pesticide pollution. Furthermore, challenges regarding the effective implementation of these technologies are also addressed.

Innovations in metal-organic frameworks (MOFs): Pioneering adsorption approaches for persistent organic pollutant (POP) removal

Adsorption is a promising way to remove persistent organic pollutants (POPs), a major environmental issue. With their high porosity and vast surface areas, MOFs are suited for POP removal due to their excellent adsorption capabilities. This review addresses the intricate principles of MOF-mediated adsorption and helps to future attempts to mitigate organic water pollution. This review examines the complicated concepts of MOF-mediated adsorption, including MOF synthesis methodologies, adsorption mechanisms, and material tunability and adaptability. MOFs' ability to adsorb POPs via electrostatic forces, acid-base interactions, hydrogen bonds, and pi-pi interactions is elaborated. This review demonstrates its versatility in eliminating many types of contaminants. Functionalizing, adding metal nanoparticles, or changing MOFs after they are created can improve their performance and remove contaminants. This paper also discusses MOF-based pollutant removal issues and future prospects, including adsorption capacity, selectivity, scale-up for practical application, stability, and recovery. These obstacles can be overcome by rationally designing MOFs, developing composite materials, and improving material production and characterization. Overall, MOF technology research and innovation hold considerable promise for environmental pollution solutions and sustainable remediation. Desorption and regeneration in MOFs are also included in the review, along with methods for improving pollutant removal efficiency and sustainability. Case studies of effective MOF regeneration and scaling up for practical deployment are discussed, along with future ideas for addressing these hurdles.

Recent advancements in modifications of metal-organic frameworks-based materials for enhanced water purification and contaminant detection

Metal-organic frameworks (MOFs) have emerged as a key focus in water treatment and monitoring due to their unique structural features, including extensive surface area, customizable porosity, reversible adsorption, and high catalytic efficiency. While numerous reviews have discussed MOFs in environmental remediation, this review specifically addresses recent advancements in modifying MOFs to enhance their effectiveness in water purification and monitoring. It underscores their roles as adsorbents, photocatalysts, and in luminescent and electrochemical sensing. Advancements such as pore modification, defect engineering, and functionalization, combined synergistically with advanced materials, have led to the development of recyclable MOF-based nano-adsorbents, Z-scheme photocatalytic systems, nanocomposites, and hybrid materials. These innovations have broadened the spectrum of removable contaminants and improved material recyclability. Additionally, this review delves into the creation of multifunctional MOF materials, the development of robust MOF variants, and the simplification of synthesis methods, marking significant progress in MOF sensor technology. Furthermore, the review addresses current challenges in this field and proposes potential future research directions and practical applications. The growing research interest in MOFs underscores the need for an updated synthesis of knowledge in this area, focusing on both current challenges and future opportunities in water remediation.

Adsorption of diazinon from aqueous solution using metal organic framework and functionalized graphene: Comparison of BBD, ANN models

In the present study, metal organic frameworks (MOFs) and aminated graphitic carbonaceous structure (ACS-RGO) through chemical synthesis prepared by a simple precipitation method and used for diazinon removal. Several techniques such as XRD , FESEM and FTIR were applied for identification of MOF-5 and ACS-RGO. Also, response surface methodology (RSM) was employed in this work to look at the effectiveness of diazinon adsorption. To forecast pesticide removal, we applied artificial neural network (ANN) and Box-Behnken Design (BBD) models. For the ANN model, a sensitivity analysis was also performed. The effect of independent variables like solution pH, various concentrations of diazinon, MOFs and ACS-RGO adsorbent dose and contact time were assessed to find out the optimum conditions. Based on the model prediction, the optimal condition for adsorption ACS-RGO and MOF-5 were determined to be pH 6.6 and 6.6, adsorbent dose of 0.59 and 0.906 g/L, and mixing time of 52.15 and 36.96 min respectively. These conditions resulted in 96.69% and 80.62% diazinon removal using ACS-RGO and MOF-5, respectively. Isotherm studies proved the adsorption of ACS-RGO and MOF-5 following the Langmuir isotherm model for diazinon removal. Diazinon removal followed by the pseudo-second and Pseudo-first order kinetics model provides a better fit for analyzing the kinetic data associated with pesticide adsorption for ACS-RGO and MOF-5, respectively. Based on the obtained results, the predicted values for the efficiency of diazinon removal with the ANN and BBD were similar (R2=0.98). Therefore, two models were able to predict diazinon removal by ACS-RGO and MOF-5.

Critical review on organophosphate esters in water environment: Occurrence, health hazards and removal technologies

Organophosphate esters (OPEs), which are phosphoric acid ester derivatives, are anthropogenic substances that are widely used in commerce. Nevertheless, there is growing public concern about these ubiquitous contaminants, which are frequently detected in contaminated water sources. OPEs are mostly emitted by industrial operations, and the primary routes of human exposure to OPEs include food intake and dermal absorption. Because of their negative effects on both human health and the environment, it is clear that innovative methods are needed to facilitate their eradication. In this study, we present a comprehensive overview of the existing characteristics and origins of OPEs, their possible impacts on human health, and the merits, drawbacks, and future possibilities of contemporary sophisticated remediation methods. Current advanced remediation approaches for OPEs include adsorption, degradation (advanced oxidation, advanced reduction, and redox technology), membrane filtration, and municipal wastewater treatment plants, degradation and adsorption are the most promising removal technologies. Meanwhile, we proposed potential areas for future research (appropriate management approaches, exploring the combination treatment process, economic factors, and potential for secondary pollution). Collectively, this work gives a comprehensive understanding of OPEs, providing useful insights for future research on OPEs pollution.

Facile adsorption of organophosphate pesticides over HKUST-1 MOFs

The recovery of organophosphate pesticides (OPPs) from aqueous solutions is imperative considering their agricultural and environmental implications. Among various mitigation approaches used for OPPs' removal, adsorption offers many advantageous features for OPPs abatement owing to its benign nature, cost-effective processing, and non-requirement of excessive equipment. This research describes the adsorptive removal of three organophosphate pesticides (OPPs) namely chlorpyrifos (CPF), methyl parathion (MP), and malathion (MAL) by HKUST-1 (HKUST = Hong Kong University of Science and Technology) metal-organic framework (MOF). The synthesis of HKUST-1 MOFs was confirmed by various spectroscopic and microscopic techniques. The adsorption kinetics was systematically investigated by varying three parameters to include solution pH, contact time, and initial pesticide concentration. Among all the three pesticides, HKUST-1 showed enhanced removal of CPF in terms of pH, resulting in an adsorption capacity of 1.82 mg·g-1. However, under the effect of contact time at 60 min, the adsorption capacity of HKUST-1 for PM, MAL, and CPF were computed to be 1.83, 1.79, and 0.44 mg·g-1, respectively. Besides, HKUST-1 showed a remarkable performance towards adsorptive removal of MAL (14.01 mg·g-1 at 10 mg·L-1 concentration) with linear increase in adsorption capacity as the function of initial pesticide concentration. The MOFs were also able to retain ca. 50% of their adsorption efficiency over the course of five cycles of adsorptive removal of CP. In the future, a comprehensive data table showing the performance of various MOFs against various OPPs can be constructed on the basis of parameters used in this study.

Green synthesis of Fe3O4@SiO2@Salg particles for organophosphorus pesticides removal: Mechanisms, biosafety, and application

A biosafe magnetic Fe₃O₄@SiO₂@Salg (GMS) was successfully developed via a simple and economic method. Fe₃O₄@SiO₂ particles were selected as the magnetic core, and they directly interacted with sodium alginate, thus mitigating the use of cross-linking agents. The microstructure, properties, and formation mechanism of GMS were examined using FE-SEM, TEM, VSM, TGA, zeta potential, and FT-IR. The as-developed GMS was used as a desirable adsorbent to remove organophosphorus pesticides (OPPs) from water bodies, and the influence of different factors on the removal efficiencies of OPPs was investigated. Optimal preparation conditions were determined, and the excellent removal efficiencies of the 18 OPPs were achieved in this study (80.5%-100% for tap, river, and seawater). After the GMS was recycled eight times, the removal efficiencies of 18 OPPs were maintained at >80%. Adsorption kinetics and isotherm models showed that the adsorption process was accurately fitted with the Langmuir isotherm and pseudo-second-order models. The values of ΔG, ΔH, and ΔS were negative, indicating that the OPPs were adsorbed on the GMS spontaneously via an exothermal reaction, and chemisorption was the dominant adsorption mechanism. Overall, the as-developed GMS was biosafe as revealed by cytotoxicity experiments. GMS had good environmental security, stability, and reusability, and it exhibited excellent potential for removing OPPs from aqueous solutions without causing secondary pollution.

CuCo Nanoparticle, Pd(II), and l-Proline Trifunctionalized UiO-67 Catalyst for Three-Step Sequential Asymmetric Reactions

Metal-organic frameworks (MOFs) have become a promising support for different active sites to construct multifunctional and heterogeneous catalysts. However, the related investigation mainly focuses on introducing one or two active sites into MOFs and trifunctional catalysts have been very rarely reported. Herein, non-noble CuCo alloy nanoparticles, Pd²⁺, and l-proline, as encapsulated active species, functional organic linkers, and active metal nodes, respectively, were successfully decorated to UiO-67 to construct a chiral trifunctional catalyst by the one-step method, which was further applied to asymmetric three-step sequential oxidation of aromatic alcohols/Suzuki coupling/asymmetric aldol reactions with excellent oxidation and coupling performance (yields up to 95 and 96%, respectively), as well as good enantioselectivities (ee_anti value up to 73%) in asymmetric aldol reactions. The heterogeneous catalyst can be reused at least five times without obvious deactivation due to the strong interaction between the MOFs and the active sites. This work provides an effective strategy to construct multifunctional catalysts via the introduction and combination of three or more of active sites, including encapsulated active species, functional organic linkers, and active metal nodes, into stable MOFs.

A review on the applicability of adsorption techniques for remediation of recalcitrant pesticides

Pesticide has revolutionised the agricultural industry by reducing yield losses and by enhancing productivity. But indiscriminate usage of such chemicals can negatively impact human health and ecosystem balance as certain pesticides can be recalcitrant in nature. Out of some of the suggested sustainable techniques to remove the pesticide load from the environment, adsorption is found to be highly efficient and can also be implemented on a large scale. It has been observed that natural adsorption that takes place after the application of the pesticide is not enough to reduce the pesticide load, hence, adsorbents like activated carbon, plant-based adsorbents, agricultural by-products, silica materials, polymeric adsorbents, metal organic framework etc are being experimented upon. It is becoming increasingly important to choose adsorbents which will not leave any secondary pollutant after treatment and the cost of production of such adsorbent should be feasible. In this review paper, it has been established that certain adsorbent like biochar, hydrochar, resin, metal organic framework etc can efficiently remove pesticides namely chlorpyrifos, diazinon, 2,4-Dichlorophenoxyacetic Acid, atrazine, fipronil, imidacloprid etc. The mechanism of adsorption, thermodynamics and kinetic part have been discussed in detail with respect to the pesticide and adsorbent under discussion. The reason behind choosing an adsorbent for the removal of a particular pesticide have also been explained. It is further highly recommended to carry out a cost analysis before implementing an absorbent because inspite of its efficacy, it might not be cost effective to use it for a particular type of pesticide or contaminant.

Heterogeneous photocatalytic oxidation for the removal of organophosphorus pollutants from aqueous solutions: A review

Organophosphorus pollutants (OPs), which are compounds containing carbon‑phosphorus bonds or phosphate derivatives containing organic groups, have received much attention from researchers because of their persistence in the aqueous environment for long periods of time and the threat they pose to human health. Heterogeneous photocatalysis has been widely applied to the removal of OPs from aqueous solutions due to its better removal effect and environmental friendliness. In this review, the removal of OPs from aqueous matrices by heterogeneous photocatalysis was presented. Herein, the application and the heterogeneous photocatalysis mechanism of OPs were described in detail, and the effects of catalyst types on degradation effect are discussed categorically. In particular, the heterojunction type photocatalyst has the most excellent effect. After that, the photocatalytic degradation pathways of several OPs were summarized, focusing on the organophosphorus pesticides and organophosphorus flame retardants, such as methyl parathion, dichlorvos, dimethoate and chlorpyrifos. The toxicity changes during degradation were evaluated, indicating that the photocatalytic process could effectively reduce the toxicity of OPs. Additionally, the effects of common water matrices on heterogeneous photocatalytic degradation of OPs were also presented. Finally, the challenges and perspectives of heterogeneous photocatalysis removal of OPs are summarized and presented.

Recent advances in application of metal-organic frameworks (MOFs) as adsorbent and catalyst in removal of persistent organic pollutants (POPs)

The presence of persistent organic pollutants (POPs) in the aquatic environment is causing widespread concern due to their bioaccumulation, toxicity, and possible environmental risk. These contaminants are produced daily in large quantities and released into water bodies. Traditional wastewater treatment plants are ineffective at degrading these pollutants. As a result, the development of long-term and effective POP removal techniques is critical. In water, adsorption removal and photocatalytic degradation of POPs have been identified as energy and cost-efficient solutions. Both technologies have received a lot of attention for their efforts to treat the world's wastewater. Photocatalytic removal of POPs is a promising, effective, and long-lasting method, while adsorption removal of persistent POPs represents a simple, practical method, particularly in decentralized systems and isolated areas. It is critical to develop new adsorbents/photocatalysts with the desired structure, tunable chemistry, and maximum adsorption sites for highly efficient removal of POPs. As a class of recently created multifunctional porous materials, Metal-organic frameworks (MOFs) offer tremendous prospects in adsorptive removal and photocatalytic degradation of POPs for water remediation. This review defines POPs and discusses current research on adsorptive and photocatalytic POP removal using emerging MOFs for each type of POPs.

Metal-Organic Frameworks as Potential Agents for Extraction and Delivery of Pesticides and Agrochemicals

Pesticide contamination is a global issue, affecting nearly 44% of the global farming population, and disproportionately affecting farmers and agricultural workers in developing countries. Despite this, global pesticide usage is on the rise, with the growing demand of global food production with increasing population. Different types of porous materials, such as carbon and zeolites, have been explored for the remediation of pesticides from the environment. However, there are some limitations with these materials, especially due to lack of functional groups and relatively modest surface areas. In this regard, metal-organic frameworks (MOFs) provide us with a better alternative to conventionally used porous materials due to their versatile and highly porous structure. Recently, a number of MOFs have been studied for the extraction of pesticides from the environment as well as for targeted and controlled release of agrochemicals. Different types of pesticides and conditions have been investigated, and MOFs have proved their potential in agricultural applications. In this review, the latest studies on delivery and extraction of pesticides using MOFs are systematically reviewed, along with some recent studies on greener ways of pest control through the slow release of chemical compounds from MOF composites. Finally, we present our insights into the key issues concerning the development and translational applications of using MOFs for targeted delivery and pesticide control.

Highly efficient removal of glyphosate from water by hierarchical-pore UiO-66: Selectivity and effects of natural water particles

The selective removal of glyphosate (GP) from aqueous environments is crucial for ensuring human health and environmental sustainability. The preparation of hierarchical-pore MOFs and the reasonable regulation of the pore size are effective strategies for achieving selective removal. In this study, we applied hierarchical-pore UiO-66 analogues (HUiO-66s) synthesized by the template technique through a mild method for the removal of GP from water. The results showed that the maximum adsorption capacity of HUiO-66s was as high as 400 mg/g, which is higher than that of most reported adsorbents. Notably, HUiO-66s showed the highest adsorption rate and distribution coefficient for GP in a multivariate system containing different organophosphorus pesticides and antibiotics, exhibiting suitable selective adsorption performance for GP. Furthermore, GP adsorption onto HUiO-66-2 (prepared from 2 mL of MOF-5 template) did not affect the presence of competing anions and humic acids. Naturally occurring particles in the water body had an enhanced (i.e., Al2O3, sepiolite, and montmorillonite), reduced (i.e., illite and SiO2), or insignificant (i.e., kaolin) effect on the GP adsorption rate of HUiO-66-2. Further analysis based on the bulk adsorption results and microscopic characterisation indicated that the pore structure synergistically occurred with metal-ligand bonding, hydrogen bonding, and electrostatic interactions, which together determined the GP adsorption. Overall, the high adsorption and apparent adsorption selectivity of HUiO-66s facilitated the rapid separation and removal of GP in complex aqueous environments. Our findings provide insights into the transport and fate of MOFs and contaminants in natural aquatic systems.

Metal-Organic Frameworks in Agriculture

Agrochemicals, which are crucial to meet the world food qualitative and quantitative demand, are compounds used to kill pests (insects, fungi, rodents, or unwanted plants). Regrettably, there are some important issues associated with their widespread and extensive use (e.g., contamination, bioaccumulation, and development of pest resistance); thus, a reduced and more controlled use of agrochemicals and thorough detection in food, water, soil, and fields are necessary. In this regard, the development of new functional materials for the efficient application, detection, and removal of agrochemicals is a priority. Metal-organic frameworks (MOFs) with exceptional sorptive, recognition capabilities, and catalytical properties have very recently shown their potential in agriculture. This Review emphasizes the recent advances in the use of MOFs in agriculture through three main views: environmental remediation, controlled agrochemical release, and detection of agrochemicals.

A sensitive fluorescence "turn on" nanosensor for glutathione detection based on Ce-MOF and gold nanoparticles

Glutathione (GSH) as an essential biothiol maintains redox homeostasis in human body, the aberrant level of it has been related to various diseases. In this work, we constructed a facile and environment-friendly strategy by using Ce based metal-organic frameworks and gold nanoparticles (AuNPs) for detection of GSH. The fluorescence intensity of the Ce-MOF was quenched by AuNPs, which is ascribed to the existence of fluorescence resonance energy transfer (FRET) and electrostatic interaction between Ce-MOFs and AuNPS. Because of the formation of Au-SH between AuNPs and GSH, the addition GSH induced the Ce-MOF/AuNPs and prevented the occurrence of FRET and electrostatic interaction between Ce-MOFs and AuNPS, which futher recovered the fluorescence of Ce-MOF. Under the optimized conditions, this "turn-on" sensing process revealed a high selectivity toward GSH and displayed good linearity in range of 0.2-32.5 μM with low detection limit of 58 nM. In addition, the practicability of the strategy was testified through analyzing GSH in real human serum samples.

Removal of organic pollutants from aqueous solution using metal organic frameworks (MOFs)-based adsorbents: A review

The development of metal organic frameworks (MOFs) has recently drawn a lot of scientific interest in water treatment due to the unique properties such as tunable porosities, large pore volumes, hierarchical structures, excellent adsorption and regeneration performances. MOFs represent an eco-friendly alternative to conventional adsorbents especially for the adsorptive removal of noxious organic pollutants from aqueous solution. Advanced MOFs' performances are justified by the introduction of functional groups, magnetic moieties, and specific foreign materials onto MOFs. This however leads to increase in the manufacturing costs of MOFs and consequently possess a huge challenge in large-scale applications. This review hence critically discusses the recent progresses in the development of MOFs-based adsorbents for the removal of selected organic pollutants (e.g., dyes, antibiotics and pesticides) from aqueous solution. Furthermore, major interaction mechanisms between MOFs and organic pollutants in response to numerous experimental conditions, such as pH, temperature, coexisting ions are put forward. Finally, some recommendations in support for designing MOFs with improved adsorption performances are also highlighted.

Glyphosate adsorption onto porous clay heterostructure (PCH): kinetic and thermodynamic studies

The synthesis of PCH from natural bentonite produces a porous heterostructure material effective for the adsorption of glyphosate from water. The adsorption process takes place through an interaction between the silanol group of montmorillonite and/or the PCH adsorbent with the functional groups of glyphosate. The glyphosate adsorption isotherms, recorded for all the studied samples, have been established to be of Langmuir type. The kinetic of the herbicide adsorption on the PCH was best described by the pseudo-second-order model. With the increase in temperature from 25 to 50 °C, the sorption capacities of the materials studied towards glyphosate increased. The process of glyphosate adsorption was found to be endothermic and spontaneous in nature, as indicated by positive values of ΔH and negative values of ΔG. According to the results obtained, the herbicide sorption was more effective in a basic environment. The maximum amount of adsorbed glyphosate is almost doubled with PCH from 13.5 mg/g of natural clay to 27.5 mg/g of PCH.

Graphic abstract

One-pot synthesis of sulfonic acid functionalized Zr-MOFs for rapid and specific removal of radioactive Ba2

Efficient decontamination of radioactive Ba2+ is of great significance to human health and environmental safety. Herein, an adsorbent based on the sulfonic acid functionalized Zr-MOF has been successfully developed, which could efficiently decontaminate radioactive Ba2+ with excellent selectivity, recyclability, a high adsorption capacity up to 60.8 mg g-1 as well as a short adsorption kinetic time of less than 5 min. This outstanding adsorption performance is attributed to the strong affinity between Ba2+ and high density -SO3H active sites in MOFs which were introduced by an in situ ligand modification strategy during the assembly of MOFs.

Oriented oxidation of all alkanes in soils

In order to investigate the mechanism of the oriented oxidation of all alkanes by regulating organic functional groups, Fenton oxidation was performed in two soils (S1 and S2: total petroleum hydrocarbons (TPH) are 26,281 mg/kg and 12,668 mg/kg). The higher the proportion of hydroxyl radicals (OH) transferred (41 %-58 %), the more the number of oriented oxidation of alkanes, which realized the oriented oxidation of all alkanes. Meanwhile, high oriented oxidation of long alkanes and short alkanes (58 %: 3405 mg/kg and 1729 mg/kg) was observed. Protein Ⅰ in soil organic matter (SOM) was reduced by regulating CH and carboxyl group OH, which indicated that protein Ⅰ was inactive. Protein Ⅰ oxidation after regulation was decreased significantly. Protein Ⅰ was the main active organic matter to capture OH. When the relative reactivity coefficient K_TPH/SOM (the ratio of TPH oxidation to SOM oxidation) and K_{TPH/protein I} (the ratio of TPH oxidation to protein Ⅰ oxidation) were higher than 1, low oxidation of SOM and protein Ⅰ was obtained. It indicated that for the oriented oxidation of all alkanes, the high coefficient of relative reactivity for petroleum was the key for the transfer of OH from oxidizing SOM to oxidizing alkanes.

Green choline amino acid ionic liquids aqueous two-phase extraction coupled with synchronous fluorescence spectroscopy for analysis naphthalene and pyrene in water samples

A novel aqueous two-phase extraction method has been established for the determination of polycyclic aromatic hydrocarbons in water sample. This method was based on the extraction of naphthalene and pyrene from water by means of choline amino acid ionic liquids aqueous two-phase system and their determination by synchronous fluorescence spectroscopy. In synchronous fluorescence spectroscopy, the fluorescence peaks of naphthalene and pyrene were completely separated to meet the requirement of simultaneous determination. For this method, good linear calibration curves of naphthalene and pyrene were obtained in the range of 0.50-10.0, 0.05-5.0 μg mL^-1, respectively, and limits of detection were 0.211, 0.012 μg mL^-1, respectively. The proposed method was successfully applied for the simultaneous determination of naphthalene and pyrene in water samples, which was considered as an excellent green analysis according Analytical Eco-Scale.

High selectivity and effectiveness for removal of tetracycline and its related drug resistance in food wastewater through schwertmannite/graphene oxide catalyzed photo-Fenton-like oxidation

Selectively and effectively for removal of tetracycline (TC) and its related antibiotic resistance gene from food wastewater matrix with high-salt and high COD characteristics is highly desirable. In this work, novel schwertmannite/graphene oxide (SCH/GO) nanocomposites were synthesized through a facile oxidation-coprecipitation method. The SCH/GO nanocomposites were characterized by TEM, XRD, BET, PL, DRS, XPS and FTIR. In the presence of 1 mM H₂O₂, the SCH/GO catalyzed Fenton-like oxidation can thoroughly degrade TC under visible light irradiation, even under nature sunlight, whose second-order kinetic rate constant was about 15 times higher than that of pure SCH. SCH/GO was capable of highly selectively capturing and effectively degrading TC in the presence of similar concentration of Cl^-, NO₃^-, SO₄^2- and PO₄^3- with that of food wastewater, even at organic matters concentration of 12.5 times than that of TC. At the same time, the removal of total organic carbon (TOC) and chemical oxygen demand (COD) in aforementioned food wastewater in SCH/GO+H₂O₂+Vis system reached 27.3 % and 34.5 % after 60 min, respectively. The inhibition zone experiments authenticated that the removal of drug resistance of bacteria by TC degradation intermediates can be achieved very well without producing secondary contamination in this system.

A novel triphenylamine-based bis-Schiff bases fluorophores with AIE-Activity as the hydrazine fluorescence turn-off probes and cell imaging in live cells

Developing a specific and sensitive method for endogenous hydrazine detection in living systems is valuable to understand its various pathological events. In this work, two novel fluorescent chemosensors (C1, C3) based on triphenylamine Schiff-base derivative and reference dyes (C2, C4) were prepared in relatively high yield (more than 72% yield). The aggregation induced emission (AIE) properties of sensors were investigated through UV-Visible, dynamic light scattering, X-ray diffraction, fluorescence spectrophotometric analyses as well as scanning electron microscope images (SEM). The results indicated that probes C1 and C3 exhibited strong AIE property in DMF/H₂O (1:1, v/v) mixture system with brilliant yellow fluorescence emission (560 nm) observed under 365 nm UV lamp. The experiments of sensing indicated that probes C1 and C3 possessed the sequentially detecting abilities for hydrazine with high sensitivity, specificity as well as an extremely low detection limit (55.1 nM), which was due to blocking of AIE process of probes C1 and C3 by special chemical reaction (-CHN- moiety transformed into -CH₂-NH- group) after hydrazine addition, resulting in the increase in water solubility and a weak emission in aqueous media. Furthermore, ¹H NMR, SEM and fluorescence titration experiment was also conducted to confirm the sensing mechanism. For biological application, probes C1 and C3 presented a good bio-imaging performance and showed the similar fluorescence quenching after adding hydrazine. Therefore, the probes are suitable for the fluorescence imaging of exogenous hydrazine in HeLa cells.

Dynamic proteome responses to sequential reduction of Cr(VI) and adsorption of Pb(II) by Pannonibacter phragmitetus BB

Here, the microbial responses to Cr(VI) and Pb(II) with bio-removal of the metals in water by Pannonibacter phragmitetus BB were explored. The comparative bacterial proteomics showed that the intracellular and extracellular Cr(VI) reduction proteins, Pb(II) adsorption by the lipoprotein and sugar-related bacterial proteins, as well as Pb(II) precipitation by phosphate and OH^- were vital to the bio-removal of Cr(VI) and Pb(II). Moreover, the influx and efflux channels of Cr(VI) and Cr(III), Pb(II) transporters, extracellular siderophores for Pb(II) complexation and antioxidant proteins enabled the strain BB to resist the toxicity of Cr(VI) and Pb(II). In addition, the dynamic expression levels of the proteins related to reduction and transportation of Cr(VI), and adsorption, transportation and complexation of Pb(II) were dependent on the corresponding metal, respectively. The anti-oxidative stress system, such as superoxide dismutase, and Na⁺/H⁺ antiporters played central roles in the protein-protein interaction network to resist and detoxify Cr(VI) and Pb(II). The results of our study provide a novel insight for the physiological responses of the strain BB to the combined stresses of Pb(II) and Cr(VI).

A bond energy transfer based difunctional fluorescent sensor for Cys and bisulfite

In living cells, cysteine (Cys) and bisulfite are involved in many important physiological processes. Their unbalance in vivo would lead to multiple diseases. So, it is vital to develop difuntional sensor for Cys and bisulfite. As we known, cysteine could metabolized into bisulfite by the metabolic processes of cysteine in the animal level. Therefore, we designed and synthesized a mitochondria-targeted long-wavelength ratio fluorescence sensor Z2 for Cys and bisulfite simultaneous detection. Z2 exhibitted excellent selectivity, good anti-interference, fast response and low detection limit. The sensor exhibited obviously two channels fluorescence response for Cys and bisulfite orderly. Z2 is widely used for imaging Cys and bisulfite in MCF-7 cells, zebrafish, and mice, and successfully imaging Cys metabolism in these livings. We hope this bifunctional ratio fluorescence sensor Z2 will be a useful tool to monitor Cys and SO₂ levels in living systems.