1
|
Kung DCN, Moon J, Kang H, Kang SW. Enhancing CA-based separators with thermo-responsive ionic liquids: A path to eco-friendly membrane production and multifaceted applications. Carbohydr Polym 2024; 337:122185. [PMID: 38710563 DOI: 10.1016/j.carbpol.2024.122185] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2023] [Revised: 04/15/2024] [Accepted: 04/17/2024] [Indexed: 05/08/2024]
Abstract
We synthesized a temperature-responsive ionic liquid, [N4444][SS], and incorporated it into an environmentally friendly cellulose acetate (CA)-based battery separator. A pore was formed in the battery separator by [N4444][SS], which pierced a plasticized part due to water pressure. Varying drying temperatures during membrane fabrication revealed that the CA/[N4444][SS] membrane dried at 50 °C exhibited greater thickness and a smaller average pore size, resulting in an asymmetric internal structure. Despite the asymmetry, this membrane demonstrated significantly higher water flux and a lower Gurley value compared to the membrane dried at 25 °C, indicating minimal tortuosity and low resistance within the internal pores. Thermal behavior analysis through TGA and DSC, as well as FT-IR spectroscopy, confirmed that [N4444][SS] remains within the CA matrix, forming coordinative bonds. The findings suggest that the CA/[N4444][SS] membrane, when used as a Li-ion battery separator, could enhance Li-ion transport properties and conductivity. Moreover, the recyclability of the IL in the membrane fabrication process contributes to a more environmentally friendly approach.
Collapse
Affiliation(s)
- Do Chun Nam Kung
- Department of Chemistry and Energy Engineering, Sangmyung University, Seoul 03016, Republic of Korea
| | - Jihyeon Moon
- BK-21 Four Graduate Program, Department of Chemical Engineering, Dong-A University, Busan 49315, Republic of Korea
| | - Hyo Kang
- BK-21 Four Graduate Program, Department of Chemical Engineering, Dong-A University, Busan 49315, Republic of Korea.
| | - Sang Wook Kang
- Department of Chemistry and Energy Engineering, Sangmyung University, Seoul 03016, Republic of Korea.
| |
Collapse
|
2
|
Lee C, Kang SW. Derivation of porous cellulose propionate using hydrated hydroxyl groups and hydraulic pressure. Int J Biol Macromol 2024; 262:130240. [PMID: 38368993 DOI: 10.1016/j.ijbiomac.2024.130240] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/26/2023] [Revised: 01/09/2024] [Accepted: 02/14/2024] [Indexed: 02/20/2024]
Abstract
This study aimed to enhance the thermal stability of microporous separators by introducing cellulose propionate (CP) as an innovative polymer matrix material, supplemented with glycerin as an additive. CP/glycerin composite membranes were created using hydraulic pressure techniques to reinforce essential separator properties. SEM analysis unveiled interconnected pores crucial for efficient ion transport, initiating water flux measurements at 5 bar. These measurements showcased improved mechanical strength, resulting in a porosity of 74.1 %. FT-IR spectroscopy illustrated CP-glycerin interactions, inducing plasticization and facilitating pore formation. Thermal Gravimetric Analysis (TGA) demonstrated superior thermal stability in CP/glycerin composite membranes compared to cellulose acetate (CA). Differential Scanning Calorimetry (DSC) revealed a slight reduction in thermal stability within a specific temperature range due to glycerin-induced plasticization effects. Nonetheless, the melting temperature (Tm) of CP/glycerin membranes increased to 188.4 °C, indicating heightened stability at elevated temperatures. Despite pressure-induced pore formation, CP/glycerin membranes exhibited enhanced thermal stability, suggesting reinforced molecular interactions. Overall, this study introduces a novel CP/glycerin composite membrane featuring improved thermal stability, enhanced strength, and controlled pore structures essential for efficient lithium-ion battery applications.
Collapse
Affiliation(s)
- Chaeyeon Lee
- Department of Chemistry and Energy Engineering, Sangmyung University, Seoul 03016, Republic of Korea
| | - Sang Wook Kang
- Department of Chemistry and Energy Engineering, Sangmyung University, Seoul 03016, Republic of Korea.
| |
Collapse
|
3
|
Lee S, Byun S, Kang SW. Mass transport to generate the channels in cellulose polymers by vacuum-assisted process. Int J Biol Macromol 2024; 259:128337. [PMID: 38000616 DOI: 10.1016/j.ijbiomac.2023.128337] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/07/2023] [Revised: 10/09/2023] [Accepted: 11/14/2023] [Indexed: 11/26/2023]
Abstract
This study developed a pore-connected PP-CA membrane by coating cellulose acetate onto a polypropylene filter. A new method was proposed to attach a CA/glycerin coating layer to a porous PP support without a separate binder. The pores of CA and PP were interconnected using a vacuum filtration device. By adding glycerin to the CA chains, the membrane region became more flexible due to glycerin plasticization. Water passed through the membrane under pressure differences, resulting in the formation of interconnected pores between cellulose acetate and polypropylene. The pore size and quantity could be adjusted by varying the molar ratio of glycerin. Fourier transform infrared spectroscopy revealed the interaction between CA and glycerin, while thermogravimetric analysis showed that the membrane's thermal stability increased by approximately 20 °C after vacuum filtration. This simple and cost-effective manufacturing process holds potential for mass-producing separators in the lithium-ion battery industry.
Collapse
Affiliation(s)
- Sojeong Lee
- Department of Chemistry and Energy Engineering, Sangmyung University, Seoul 03016, Republic of Korea
| | - Sunghyun Byun
- Department of Chemistry and Energy Engineering, Sangmyung University, Seoul 03016, Republic of Korea
| | - Sang Wook Kang
- Department of Chemistry and Energy Engineering, Sangmyung University, Seoul 03016, Republic of Korea.
| |
Collapse
|
4
|
Byun S, Cho Y, Kang SW. Channels formation in cellulose materials by accelerated transport of gas molecules and glycerin. Int J Biol Macromol 2024; 254:127823. [PMID: 37949285 DOI: 10.1016/j.ijbiomac.2023.127823] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/04/2023] [Revised: 10/05/2023] [Accepted: 10/21/2023] [Indexed: 11/12/2023]
Abstract
In this study, a microporous separator was produced using cellulose acetate (CA), which demonstrates heightened thermal stability in comparison to existing materials like polypropylene (PP) or polyethylene (PE). Furthermore, a pliable component was integrated into the CA membrane using glycerin as the plasticizing agent. Subsequently, gas pressure was exerted onto these areas to induce the formation of nano-sized pores. Examination through Scanning Electron Microscopy (SEM) unveiled the presence of abundant pores in the glycerin-plasticized areas. This substantiates that the pores generated under gas pressure were not only more uniform but also smaller than those created under water pressure. The interaction between CA and glycerin was validated using Fourier-Transform Infrared Spectroscopy (FT-IR), offering confirmation that a portion of the glycerin was extracted following the application of gas pressure. Additionally, the application of Thermogravimetric Analysis (TGA) allowed for an assessment of the thermal stability of the CA membrane, along with a verification of glycerin's removal post gas pressure treatment. The findings indicated that the incorporation of glycerin diminished the thermal stability of the CA membrane due to the plasticization effect. Furthermore, it was observed that a minor quantity of glycerin still persisted after the gas pressure treatment. Following the analysis of gas permeation, the porosity of the CA membrane was quantified at 78.8 %, exhibiting an average pore size measuring 224 nm.
Collapse
Affiliation(s)
- Sunghyun Byun
- Department of Chemistry and Energy Engineering, Sangmyung University, Seoul 03016, Republic of Korea
| | - Younghyun Cho
- Department of Energy Systems Engineering, Soonchunhyang University, Asan 31538, Republic of Korea.
| | - Sang Wook Kang
- Department of Chemistry and Energy Engineering, Sangmyung University, Seoul 03016, Republic of Korea.
| |
Collapse
|
5
|
Byun S, Kang SW. Gas transport into cellulose materials for highly porous structure. Carbohydr Polym 2023; 321:121301. [PMID: 37739504 DOI: 10.1016/j.carbpol.2023.121301] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/05/2023] [Revised: 08/11/2023] [Accepted: 08/14/2023] [Indexed: 09/24/2023]
Abstract
To solve the low thermal stability of polyolefin membranes, our group developed porous polymers using cellulose acetate (CA) material. The formation of pores in CA involved creating plasticized regions within the CA membrane using additives. By applying gas pressure to these regions, a CA/glycolic acid membrane could be prepared with a small average pore size and high porosity. According to the porosimeter measurement, the average pore size of the membrane was 150 nm, and the porosity was 77%. SEM observations of the surface and cross-section of the CA/glycolic acid membrane confirmed the abundant distribution of fine pores. Furthermore, IR analysis revealed the removal of glycolic acid from the membrane after pore formation, indicating its interaction with CA during the process of gas permeation. Additionally, TGA analysis demonstrated a decrease in thermal stability due to the formation of numerous pores after gas permeation.
Collapse
Affiliation(s)
- Sunghyun Byun
- Department of Chemistry and Energy Engineering, Sangmyung University, Seoul 03016, Republic of Korea
| | - Sang Wook Kang
- Department of Chemistry and Energy Engineering, Sangmyung University, Seoul 03016, Republic of Korea.
| |
Collapse
|
6
|
Refaat HM, Ashraf N, El-Dissouky A, Tieama HA, Kamoun EA, Showman MS. Efficient removal of bovine serum albumin from water by cellulose acetate membranes modified with clay and titania nano particles. Front Chem 2023; 11:1111558. [PMID: 36817172 PMCID: PMC9931067 DOI: 10.3389/fchem.2023.1111558] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/29/2022] [Accepted: 01/19/2023] [Indexed: 02/04/2023] Open
Abstract
Modified cellulose acetate membranes with bentonite clay (CA/bent) and TiO2 nanoparticles (CA/TiO2) using the phase inversion method are successfully prepared and characterized. These Membranes are favored due to their high salt rejection properties and recyclability. The IR and EDX spectral data indicate the formation of modified membranes. The Scan Electron Microscope micrographs show that the modified membranes have smaller particle sizes with higher porosity than the neat membrane. The average pore diameter is 0.31 µm for neat cellulose acetate membrane (CA) and decreases to 0.1 µm for CA/0.05bent. All modified membranes exhibit tensile strengths and elongation percentages more than the neat membrane. The higher tensile strength and the maximum elongation% are 15.3 N/cm2 and 11.78%, respectively, for CA/0.05bent. The thermogravimetric analysis of modified membranes shows higher thermal stability than the neat membrane. The modified membranes exhibit enhanced wettability and hydrophilicity compared with cellulose acetate, by measuring the contact angle which decreases from 60° (CA) to 40° (CA/0.1bent). The ultrafiltration tests indicated that the CA/bent and CA/TiO2 are better than CA. The most efficient nanocomposite membrane is CA/0.05bent with 100% removal of (BSA) from industrial water with a flux equal to 9.5 mL/min under an applied pressure of 20 bar. Thus, this study introduces a novel ultrafiltration membrane (CA/0.05bent) that can be used effectively to completely remove bovine serum albumin from contaminated water.
Collapse
Affiliation(s)
- Heba M. Refaat
- Department of Chemistry, Faculty of Science, Alexandria University, Alexandria, Egypt,*Correspondence: Heba M. Refaat, ; M. S. Showman,
| | - Nada Ashraf
- Department of Chemistry, Faculty of Science, Alexandria University, Alexandria, Egypt
| | - Ali El-Dissouky
- Department of Chemistry, Faculty of Science, Alexandria University, Alexandria, Egypt
| | - Hossam A. Tieama
- Abu Qir Fertilizers and Chemical Industries Co., Alexandria, Egypt
| | - Elbadawy A. Kamoun
- Nanotechnology Research Center (NTRC), The British University in Egypt, Cairo, Egypt,Department of Polymeric Materials Research, Advanced Technology and New Materials Research Institute, City of Scientific Research and Technological Applications, Alexandria, Egypt
| | - M. S. Showman
- Department of Fabrication technology, Advanced Technology and New Materials Research Institute, City of Scientific Research and Technological Applications, Alexandria, Egypt,*Correspondence: Heba M. Refaat, ; M. S. Showman,
| |
Collapse
|
7
|
Chun Nam Kung D, Wook Kang S. Porous C2H3O2-substituted cellulose with thermal stability based on sodium chloride. J IND ENG CHEM 2022. [DOI: 10.1016/j.jiec.2022.10.055] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
8
|
Stable cellulose-separator with CaO on nanoporous polypropylene by water-treated channels. POLYMER 2022. [DOI: 10.1016/j.polymer.2022.124781] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
|
9
|
Kim SH, Kang SW. Thermally stable and highly porous separator based on cellulose acetate by glycolic acid. POLYMER 2022. [DOI: 10.1016/j.polymer.2022.124592] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
10
|
Hong SH, Cho Y, Kang SW. Formation of Water-Channel by Propylene Glycol into Polymer for Porous Materials. MEMBRANES 2021; 11:881. [PMID: 34832110 PMCID: PMC8623885 DOI: 10.3390/membranes11110881] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/31/2021] [Revised: 11/02/2021] [Accepted: 11/08/2021] [Indexed: 11/16/2022]
Abstract
In this study, a porous membrane with a cellulose acetate (CA) matrix was fabricated using propylene glycol with a water pressure treatment without a metal salt as an additive. The water pressure treatment of the fabricated CA membrane with propylene glycol yielded nanopores. The nanopores were formed as the additives in the CA chains led to plasticization. The weakened chains of the parts where the plasticization occurred were broken by the water pressure, which generated the pores. Compared to the previous study with glycerin as an additive, the size of the hydration region was controlled by the number of hydrophilic functional groups. When water pressure was applied to the CA membrane containing propylene glycol as an additive, the hydration area was small, so it was effective to control the pore size and the number of nano pores than glycerin. In addition, the number of nanopores and pore size could be easily adjusted by the water pressure. The porosity of the membrane was increased owing to the trace amount of propylene glycol, confirmed by scanning electron microscopy (SEM) and porosimetry. The interaction between the CA and propylene glycol was verified by Fourier-transform infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA). Consequently, it was the optimum composition to generate pores at the CA/propylene glycol 1:0.2 ratio, and porosity of 69.7% and average pore diameter of 300 nm was confirmed. Since it is a membrane with high porosity and nano sized pores, it is expected to be applied in various fields.
Collapse
Affiliation(s)
- Seong Ho Hong
- Department of Chemistry, Sangmyung University, Seoul 03016, Korea;
| | - Younghyun Cho
- Department of Energy Systems Engineering, Soonchunhyang University, Asan 31538, Korea
| | - Sang Wook Kang
- Department of Chemistry, Sangmyung University, Seoul 03016, Korea;
- Department of Chemistry and Energy Engineering, Sangmyung University, Seoul 03016, Korea
| |
Collapse
|
11
|
The Phase Structural Evolution and Gas Separation Performances of Cellulose Acetate/Polyimide Composite Membrane from Polymer to Carbon Stage. MEMBRANES 2021; 11:membranes11080618. [PMID: 34436381 PMCID: PMC8399511 DOI: 10.3390/membranes11080618] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/14/2021] [Revised: 08/03/2021] [Accepted: 08/10/2021] [Indexed: 11/17/2022]
Abstract
Blending and heat-treatment play significant roles in adjusting gas separation performances of membranes, especially for incorporating thermally labile polymers into carbon molecular sieve membranes (CMSMs). In this work, cellulose acetate (CA) is introduced into polyimide (PI) as a sacrificial phase to adjust the structure and gas separation performance from polymer to carbon. A novel result is observed that the gas permeability is reduced, even when the immiscible CA phase decomposes and forms pores after heat treatment at 350 °C. After carbonization at 600 °C, the miscible CA has changed without contribution, while the role of the immiscible CA phase has changed from original hindrance to facilitation, the composite-based CMSM at a CA content of 10 wt.% shows highest performances, a H2 permeability of ~5300 Barrer (56% enhancement) with a similar H2/N2 permselectivity of 42. The structural analyses reveal that the chain interactions and phase separation behaviors between CA and PI play critical roles on membrane structures and gas diffusion, and the corresponding phase structural evolutions during heat treatment and carbonization determine gas separation properties.
Collapse
|
12
|
Jodeh S, Erman I, Hamed O, Massad Y, Hanbali G, Samhan S, Dagdag O, Kaya S, Serdaroğlu G. Zeolite/Cellulose Acetate (ZCA) in Blend Fiber for Adsorption of Erythromycin Residue From Pharmaceutical Wastewater: Experimental and Theoretical Study. Front Chem 2021; 9:709600. [PMID: 34336793 PMCID: PMC8316859 DOI: 10.3389/fchem.2021.709600] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/14/2021] [Accepted: 06/18/2021] [Indexed: 01/21/2023] Open
Abstract
The expanding amount of remaining drug substances in wastewater adversely affects both the climate and human well-being. In the current investigation, we developed new cellulose acetic acid derivation/zeolite fiber as an effective technique to eliminate erythromycin (ERY) from wastewater. The number of interchangeable sites in the adsorbent structures and the ratio of ERY to the three adsorbents were identified as the main reasons for the reduction in adsorption as the initial ERY concentrations increased. Additionally, for all adsorbents, the pseudo–second-order modeling showed better fitting for the adsorption than the pseudo–first-order modeling. However, the findings obtained in the pseudo–first-order model were still enough for explaining the sorption kinetics of ERY, showing that the surface displayed all chemisorption and physi-sorption adsorption processes by both adsorbents. The R2 for the second order was very close to 1 for the three adsorbents in the case of pseudo–second-order. The adsorption capacity reached 17.76 mg/g. The three adsorbents showed negative values of ΔH, and these values were −6,200, −8,500, and −9600 kJ/mol for zeolite, CA, and ZCA, respectively, and this shows that the adsorption is exothermic. The desorption analysis shows no substantial loss of adsorption site after three trials, indicating higher stability and resilience of the three adsorbents, indicating a strong repeatability of their possible use in adsorption without contaminating the environment. In addition, the chemical attitude and possible donor–acceptor interactions of ERY were assessed by the quantum chemical parameters (QCPs) and NBO analysis performed, at the HF/6-311G** calculations.
Collapse
Affiliation(s)
- Shehdeh Jodeh
- Department of Chemistry, Faculty of Science, An-Najah National University, Nablus, Palestine
| | - Israa Erman
- Department of Chemistry, Faculty of Science, An-Najah National University, Nablus, Palestine
| | - Othman Hamed
- Department of Chemistry, Faculty of Science, An-Najah National University, Nablus, Palestine
| | - Younes Massad
- Department of Chemistry, Faculty of Science, An-Najah National University, Nablus, Palestine
| | - Ghadir Hanbali
- Department of Chemistry, Faculty of Science, An-Najah National University, Nablus, Palestine
| | - Subhi Samhan
- Palestinian Water Authority, Ramallah, Palestine
| | - Omar Dagdag
- Laboratory of Agroresources, Polymers and Process Engineering (LAPPE), Department of Chemistry, Faculty of Science, Ibn Tofail University, Kenitra, Morocco
| | - Savaş Kaya
- Department of Pharmacy, Health Services Vocational School, Sivas Cumhuriyet University, Sivas, Turkey
| | - Goncagül Serdaroğlu
- Mathematics and Science Education, Sivas Cumhuriyet University, Sivas, Turkey
| |
Collapse
|
13
|
Lee HJ, Kang SW. Cellulose acetate containing CaO coated on polypropylene for enhanced thermal stability of separator. Chem Commun (Camb) 2021; 57:4388-4391. [PMID: 33949477 DOI: 10.1039/d1cc00926e] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
In this study, cellulose acetate (CA) and calcium oxide was used to manufacture an CA-CaO separator with high thermal stability and was then coated on polypropylene (PP). The high melting point of CaO and the complexation of CaO and carbonyl groups in CA increased the thermal stability of CA. Because PP is known to have a higher mechanical stability than CA, the CA-CaO separator was coated twice on the PP support, increasing the stability of the entire separator. Adhesion was imparted between the CA film and the PP film without a separate adhesive due to the swelling effect of the solvent and the water pressure treatment, and pores were even formed by the pressure. Water flux data showed that cellulose acetate containing CaO coated on polypropylene (CA-CaO on PP) obtained a relatively high flux value of 71.67 L m-2 h-1 (LMH) at a pressure of 8 bar. Through thermogravimetric analysis and Fourier transform infrared data, it was confirmed that the surfaces of two polymers were bonded and the stability was improved.
Collapse
Affiliation(s)
- Hye Ji Lee
- Department of Chemistry, Sangmyung University, Seoul 03016, Republic of Korea.
| | - Sang Wook Kang
- Department of Chemistry, Sangmyung University, Seoul 03016, Republic of Korea. and Department of Chemistry and Energy Engineering, Sangmyung University, Seoul 03016, Republic of Korea.
| |
Collapse
|