An overview of converting reductive photocatalyst into all solid-state and direct Z-scheme system for water splitting and CO2 reduction

A review on plasmonic-based heterojunction photocatalysts for degradation of organic pollutants in wastewater

Organic pollutants in wastewater are the biggest problem facing the world today due to population growth, rapid increase in industrialization, urbanization, and technological advancement. There have been numerous attempts to use conventional wastewater treatment techniques to address the issue of worldwide water contamination. However, conventional wastewater treatment has a number of shortcomings, including high operating costs, low efficiency, difficult preparation, fast recombination of charge carriers, generation of secondary waste, and limited light absorption. Therefore, plasmonic-based heterojunction photocatalysts have attracted much attention as a promising method to reduce organic pollutant problems in water due to their excellent efficiency, low operating cost, ease of fabrication, and environmental friendliness. In addition, plasmonic-based heterojunction photocatalysts contain a local surface plasmon resonance that enhances the performance of photocatalysts by improving light absorption and separation of photoexcited charge carriers. This review summarizes the major plasmonic effects in photocatalysts, including hot electron, local field effect, and photothermal effect, and explains the plasmonic-based heterojunction photocatalysts with five junction systems for the degradation of pollutants. Recent work on the development of plasmonic-based heterojunction photocatalysts for the degradation of various organic pollutants in wastewater is also discussed. Lastly, the conclusions and challenges are briefly described and the direction of future development of heterojunction photocatalysts with plasmonic materials is explored. This review could serve as a guide for the understanding, investigation, and construction of plasmonic-based heterojunction photocatalysts for various organic pollutants degradation.

GRAPHICAL ABSTRACT

Herein, the plasmonic effects in photocatalysts, such as hot electrons, local field effect, and photothermal effect, as well as the plasmonic-based heterojunction photocatalysts with five junction systems for the degradation of pollutants are explained. Recent work on plasmonic-based heterojunction photocatalysts for the degradation of various organic pollutants in wastewater such as dyes, pesticides, phenols, and antibiotics is discussed. Challenges and future developments are also described.

The construction of high efficient visible-light-driven 3D porous g-C3N4/Fe3O4 photocatalyst: A new photo-induced bacterial inactivation material enhanced by cascade photo-Fenton reaction

Photocatalytic disinfection is considered a promising method for eliminating the hazards of pathogenic bacteria. Graphitic carbon nitride (g-C₃N₄) is an ideal photocatalytic bacterial inactivation material for its advantage of tunable band structure, good stability and easy preparation. This work has constructed a novel defective 3D porous g-C₃N₄ by cyanamide carbonation using dendritic mesoporous silica template. The direct loading of Fe₃O₄ nanoparticles provided an excellent pg-C₃N₄-Fe₃O₄ photocatalyst suitable for water disinfection. Compared to pristine g-C₃N₄, the prepared 3D porous defective g-C₃N₄-Fe₃O₄ exhibited the enhanced visible light absorbance as indicated by the band gap decreasing of 0.66 eV, and about 3 and 10 fold increase of photo-induced current response and O₂ adsorption respectively. The pg-C₃N₄-Fe₃O₄ showed excellent visible-light-driven photocatalytic bactericidal activity. It could kill 1 × 10⁷ cfu mL^-1Escherichia coli completely within 1 h under visible-light illumination (100 mW cm^-2) with good reusability, its logarithmic bacterial inactivation efficiency was about 2.5 fold higher than pg-C₃N₄. The enhanced bactericidal performance is mainly ascribed to the Fe₃O₄ involved cascade photo-Fenton reaction.

Waste Biomass Selective and Sustainable Photooxidation to High-Added-Value Products: A Review

Researchers worldwide seek to develop convenient, green, and ecological production processes to synthesize chemical products with high added value. In this sense, lignocellulosic biomass photocatalysis is an excellent process for obtaining various outcomes for the industry. One issue of biomass transformation via heterogeneous catalysis into valuable chemicals is the selection of an adequate catalyst that ensures high conversion and selectivity at low costs. Titanium oxide (TiO2), is widely used for several applications, including photocatalytic biomass degradation, depolymerization, and transformation. Graphite carbon nitride (g-C3N4) is a metal-free polymeric semiconductor with high oxidation and temperature resistance and there is a recent interest in developing this catalyst. Both catalysts are amenable to industrial production, relatively easy to dope, and suited for solar light absorption. Recent investigations also show the advantages of using heterojunctions, for biomass derivates production, due to their better solar spectrum absorption properties and, thus, higher efficiency, conversion, and selectivity over a broader spectrum. This work summarizes recent studies that maximize selectivity and conversion of biomass using photocatalysts based on TiO2 and g-C3N4 as supports, as well as the advantages of using metals, heterojunctions, and macromolecules in converting cellulose and lignin. The results presented show that heterogeneous photocatalysis is an interesting technology for obtaining several chemicals of industrial use, especially when using TiO2 and g-C3N4 doped with metals, heterojunctions, and macromolecules because these modified catalysts permit higher conversion and selectivity, milder reaction conditions, and reduced cost due to solar light utilization. In order to apply these technologies, it is essential to adopt government policies that promote the use of photocatalysts in the industry, in addition to encouraging active collaboration between photooxidation research groups and companies that process lignocellulosic biomass.

The practicality and prospects for disinfection control by photocatalysis during and post-pandemic: A critical review

The prevalence of global health implications from the COVID-19 pandemic necessitates the innovation and large-scale application of disinfection technologies for contaminated surfaces, air, and wastewater as the significant transmission media of disease. To date, primarily recommended disinfection practices are energy exhausting, chemical driven, and cause severe impact on the environment. The research on advanced oxidation processes has been recognized as promising strategies for disinfection purposes. In particular, semiconductor-based photocatalysis is an effective renewable solar-driven technology that relies on the reactive oxidative species, mainly hydroxyl (•OH) and superoxide (•O₂^-) radicals, for rupturing the capsid shell of the virus and loss of pathogenicity. However, the limited understanding of critical aspects such as viral photo-inactivation mechanism, rapid virus mutagenicity, and virus viability for a prolonged time restricts the large-scale application of photocatalytic disinfection technology. In this work, fundamentals of photocatalysis disinfection phenomena are addressed with a reviewed remark on the reported literature of semiconductor photocatalysts efficacies against SARS-CoV-2. Furthermore, to validate the photocatalysis process on an industrial scale, we provide updated data on available commercial modalities for an effective virus photo-inactivation process. An elaborative discussion on the long-term challenges and sustainable solutions is suggested to fill in the existing knowledge gaps. We anticipate this review will ignite interest among researchers to pave the way to the photocatalysis process for disinfecting virus-contaminated environments and surfaces for current and future pandemics.

Photocatalytic Reduction of Carbon Dioxide on TiO2 Heterojunction Photocatalysts-A Review

The photocatalytic reduction of carbon dioxide to renewable fuel or other valuable chemicals using solar energy is attracting the interest of researchers because of its great potential to offer a clean fuel alternative and solve global warming problems. Unfortunately, the efficiency of CO₂ photocatalytic reduction remains not very high due to the fast recombination of photogenerated electron–hole and small light utilization. Consequently, tremendous efforts have been made to solve these problems, and one possible solution is the use of heterojunction photocatalysts. This review begins with the fundamental aspects of CO₂ photocatalytic reduction and the fundamental principles of various heterojunction photocatalysts. In the following part, we discuss using TiO₂ heterojunction photocatalysts with other semiconductors, such as C₃N₄, CeO₂, CuO, CdS, MoS₂, GaP, CaTiO₃ and FeTiO₃. Finally, a concise summary and presentation of perspectives in the field of heterojunction photocatalysts are provided. The review covers references in the years 2011–2021.

High concentration of methyl orange elimination by targeted construction of an α-Bi2O3/Ph–CC–Cu Z-scheme

We anchored Ph–CC–Cu onto the surface of α-Bi2O3 nanoparticles to directionally construct Z-scheme heterojunctions, which are significantly efficient for the elimination of methyl orange with high concentration (98 mg L−1) in waste water.

Design and Microwave-Assisted Synthesis of TiO2-Lanthanides Systems and Evaluation of Photocatalytic Activity under UV-LED Light Irradiation

The TiO2-Eu and TiO2-La systems were successfully synthesized using the microwave method. Based on the results of X-ray diffraction analysis, it was found that regardless of the analyzed systems, two crystal structures were noted for the obtained samples: anatase and rutile. The analysis, such as XPS and EDS, proved that the doped lanthanum and europium nano-particles are present only on the TiO2 surface without disturbing the crystal lattice. In the synthesized systems, there were no significant changes in the bandgap energy. Moreover, all the obtained systems were characterized by high thermal stability. One of the key objectives of the work, and a scientific novelty, was the introduction of UV-LED lamps into the metronidazole photo-oxidation pathway. The results of the photo-oxidation study showed that the obtained TiO2 systems doped with selected lanthanides (Eu or La) show high efficiency in the removal of metronidazole, and at the same consuming nearly 10 times less electricity compared to conventional UV lamps (high-pressure mercury lamp). Liquid-chromatography mass-spectrometry (LC-MS) analysis of an intermediate solution showed the presence of fragments of the degraded molecule by m/z 114, 83, and 60, prompting the formulation of a plausible photodegradation pathway for metronidazole.

Phenolic compounds degradation: Insight into the role and evidence of oxygen vacancy defects engineering on nanomaterials

Oxygen vacancy as a typical point defect has incited substantial interest in photocatalysis due to its profound impact on optical absorption response and facile isolation of photocarriers. The presence of oxygen vacancy can introduce the midgap defect states, which promote extended absorption in the visible region. The redistribution of electron density at the surface can stimulate the adsorption and activation kinetics of adsorbates, manifesting optimal photocatalytic performance. Despite such alluring outcomes, the ambiguity in understanding the precise location, appropriate concentration, and oxygen vacancy role is still a long-standing task. The present review article comprehensively outlines the identification of oxygen vacancy defects at bulk or on the surface and its ultimate effect on the photocatalytic degradation of phenolic compounds. Particular emphasis has been drawn to summarize the critical influence of oxygen vacancy on different factors such as crystal structure, bandgap energy, electronic structure, and charge carrier mobility by integrating experimental results and theoretical calculations. We have also explored the reaction pathways and the intermediate chemistry of phenol photodegradation by analyzing the molecular activation (O₂, H₂O, and sulphate activation) through oxygen vacancy defects. Finally, the review concludes with the various challenges and future perspectives, aiming to provide a firm base for further progressions towards photocatalysis.

Photocatalytic Inactivation of Viruses Using Graphitic Carbon Nitride-Based Photocatalysts: Virucidal Performance and Mechanism

The prevalence of lethal viral infections necessitates the innovation of novel disinfection techniques for contaminated surfaces, air, and wastewater as significant transmission media of disease. The instigated research has led to the development of photocatalysis as an effective renewable solar-driven technology relying on the reactive oxidative species, mainly hydroxyl (OH●) and superoxide (O2●−) radicals, for rupturing the capsid shell of the virus and loss of pathogenicity. Metal-free graphitic carbon nitride (g-C3N4), which possesses a visible light active bandgap structure, low toxicity, and high thermal stability, has recently attracted attention for viral inactivation. In addition, g-C3N4-based photocatalysts have also experienced a renaissance in many domains, including environment, energy conversion, and biomedical applications. Herein, we discuss the three aspects of the antiviral mechanism, intending to highlight the advantages of photocatalysis over traditional viral disinfection techniques. The sole agenda of the review is to summarize the significant research on g-C3N4-based photocatalysts for viral inactivation by reactive oxidative species generation. An evaluation of the photocatalysis operational parameters affecting viral inactivation kinetics is presented. An overview of the prevailing challenges and sustainable solutions is presented to fill in the existing knowledge gaps. Given the merits of graphitic carbon nitride and the heterogeneous photocatalytic viral inactivation mechanism, we hope that further research will contribute to preventing the ongoing Coronavirus pandemic and future calamities.

Boosting light-driven CO2 reduction into solar fuels: Mainstream avenues for engineering ZnO-based photocatalysts

The realization of artificial photosynthesis in the photocatalytic CO₂ transformation into valuable chemicals or solar fuels, such as CO, CH₄, HCOOH, and CH₃OH, by solar-light harvesting is a promising solution to both global-warming and energy-supply issues. Recently, zinc oxide (ZnO) has emerged as an excellent oxidative photocatalyst among non-titanium metal oxides due to its availability, outstanding semiconducting and optical properties, non-toxicity, affordability, and ease of synthesis. However, ZnO wide bandgap and inability to absorb in the visible region has demanded particular modification for its practical use as a sustainable photocatalyst. This review provides a panorama of the latest advancement on ZnO photocatalysis for CO₂ reduction with an overview of fundamental aspects. Various modification strategies such as transition metal and non-metal doping, loading of plasmonic metals, and surface vacancy engineering for tunning the properties and improving the performance of ZnO are elaborated. Composites or hetero-structuralization-based Z-scheme formation is also presented along with a detailed photocatalytic reduction mechanism. Moreover, a new novel Step-scheme (S-scheme) heterostructure modification with a charge transfer pathway mechanism is also highlighted. Finally, the key challenges and new directions in this field are proposed to provide a new vision for further improvement for ZnO-based photocatalytic CO₂ conversion.

Bismuth-Graphene Nanohybrids: Synthesis, Reaction Mechanisms, and Photocatalytic Applications—A Review

Photocatalysis is a classical solution to energy conversion and environmental pollution control problems. In photocatalysis, the development and exploration of new visible light catalysts and their synthesis and modification strategies are crucial. It is also essential to understand the mechanism of these reactions in the various reaction media. Recently, bismuth and graphene’s unique geometrical and electronic properties have attracted considerable attention in photocatalysis. This review summarizes bismuth-graphene nanohybrids’ synthetic processes with various design considerations, fundamental mechanisms of action, heterogeneous photocatalysis, benefits, and challenges. Some key applications in energy conversion and environmental pollution control are discussed, such as CO2 reduction, water splitting, pollutant degradation, disinfection, and organic transformations. The detailed perspective of bismuth-graphene nanohybrids’ applications in various research fields presented herein should be of equal interest to academic and industrial scientists.

Pyrochlore oxides as visible light-responsive photocatalysts

This perspective describes the use of pyrochlore oxides in photocatalysis with focus on the strategies to enhance their activity.