Fabrication of a water-retaining, slow-release fertilizer based on nanocomposite double-network hydrogels via ion-crosslinking and free radical polymerization

Synthesis of novel composite hydrogel based on carboxymethyl cellulose/acrylamide/β-cyclodextrin for drug delivery

Polysaccharide-based hydrogels have attracted significant attention in fields such as drug delivery, tissue engineering, and wound healing, primarily due to their excellent water-retention capacity, biocompatibility, and biodegradability. This study reports the preparation of a hydrogel through the copolymerization of acrylamide (AM) and carboxymethyl cellulose (CMC) using a simple free-radical polymerization method. β-cyclodextrin (β-CD), capable of encapsulating hydrophobic drugs, was chemically modified with double bonds (Ac-β-CD) and incorporated as a pendant unit in the polymerization reaction, forming a ternary copolymer hydrogel with CMC, AM, and Ac-β-CD. Ibuprofen, a model hydrophobic drug, was incorporated with Ac-β-CD through high-pressure steam sterilization and was successfully loaded into the hydrogel. The hydrogel exhibited excellent water absorption and biocompatibility. Cytotoxicity and in vivo studies confirmed its non-toxic profile. The porous hydrogel achieved an encapsulation efficiency of 97.83 % for drug-loading by autoclaving. The hydrogel showed a cumulative release rate of 87.3 % over 12 h under simulated physiological pH (pH 7.4). The CMC/AM/Ac-β-CD hydrogel system developed here thus demonstrates potential as a carrier for hydrophobic drugs.

Preparation of nutrient hydrogels with core-shell structure for seed germination and seedling growth in high temperature saline environment

Drought and soil degradation are the key factors in desertification control. How to improve the utilization efficiency of water and fertilizer has always been the focus of research in desert areas. The conventional hydrogel-loaded fertilizer is not suitable because of the high salinity and large temperature difference in sandy land. Therefore we prepared a novel temperature/pH-responsive core-shell structured hydrogel and loaded urea in three ways: in situ polymerization, encapsulation, and immersion, and germination and seedling growth experiments on Artemisia absinthium and Cabbage (Brassica campestris L. ssp. chinensis Makino) seeds. The results showed that the immersion hydrogel SAP4 (PCP-g-PAA/P(DMAEMA-co-AMPS))/urea had the best repetitive swelling performance, achieving 163.89 % of the original water absorption performance after 16 repetitions and the highest nitrogen release of 151.37 mg at 40 days. For A. desertorum, the treatment group applying the in situ composite hydrogel SAP2 (PCP-g-PAA/P(DMAEMA-co-AMPS)/urea) had the highest germination rate of 70 %; for B. campestris, the treatment groups applying SAP2, the encapsulated hydrogel SAP3 (PCP-g-PAA/urea/P(DMAEMA-co-AMPS)) and SAP4 hydrogels had higher germination rates, with SAP3 having a 100 % germination rate. This phenomenon suggests that the three urea-loaded temperature/pH-responsive core-shell structured hydrogels we have prepared are very promising as an aid to seed germination and seedling growth in high temperature saline environment.

Preparation and characterization of starch carbamate modified natural sodium alginate composite hydrogel blend formulation and its application for slow-release fertilizer

The exploration of environmentally friendly slow-release fertilizer (SRF) based on natural bio-polymers is of great importance in the development of modern agriculture and horticulture. Herein, a novel starch carbamate (SC) modified sodium alginate (SA) hydrogel (SC/SAH) was prepared utilizing as-synthesized SC and natural SA through the cationic ions crosslinking method and ultimately the corresponding slow-release fertilizer (SC/SAH-SRF) was successfully developed by immersing the dried SC/SAH matrix into saturated urea solution. Due to the low gelation temperature and high viscosity of the synthesized SC, the formed SC/SAH exhibits significantly enhanced properties including excellent water absorbency up to 8.02 g/g with considerable repeatability, abundant pore structure and high hydrophilicity compared with the neat SAH and natural starch based hydrogel (NS/SAH). Accordingly, the SC/SAH leads to higher urea loading amount ∼ 1.28 g/g. Importantly, the resultant SC/SAH-SRF also shows superior slow-release performance, yielding a cumulative urea release of only 61.6 % within 10 h and almost completely release >16 h in water, what's more, only 58.5 % of the urea releases within 25 days and exceeding 50 days for complete release in soil column assays. The slow-release of urea from SC/SAH-SRF well complies for the first-order kinetics and accomplishes via a non-Fickian diffusion process. Moreover, the pot experiment demonstrates that the SC/SAH-SRF has higher growth promotion role for the maize seedlings than those of others. Consequently, this work provides a novel strategy for preparing environmentally friendly SRF by blending modified starch and hydrogel.

A potential slow-release fertilizer based on biogas residue biochar: Nutrient release patterns and synergistic mechanism for improving soil fertility

The large yield of anaerobic digestates and the suboptimal efficacy of nutrient slow-release severely limit its practical application. To address these issues, a new biochar based fertilizer (MAP@BRC) was developed using biogas residue biochar (BRC) to recover nitrogen and phosphorus from biogas slurry. The nutrient release patterns of MAP@BRC and mechanisms for enhancing soil fertility were studied, and it demonstrated excellent performance, with 59% total nitrogen and 50% total phosphorus nutrient release rates within 28 days. This was attributed to the coupling of the mechanism involving the dissolution of struvite skeletons and the release of biochar pores. Pot experiments showed that crop yield and water productivity were doubled in the MAP@BRC group compared with unfertilized planting. The application of MAP@BRC also improved soil nutrient levels, reduced soil acidification, increased microbial populations, and decreased soil heavy metal pollution risk. The key factors that contributed to the improvement in soil fertility by MAP@BRC were an increase in available nitrogen and the optimization of pH levels in the soil. Overall, MAP@BRC is a safe, slow-release fertilizer that exhibits biochar-fertilizer interactions and synergistic effects. This slow-release fertilizer was prepared by treating a phosphorus-rich biogas slurry with a nitrogen-rich biogas slurry, and it simultaneously addresses problems associated with livestock waste treatment and provides a promising strategy to promote zero-waste agriculture.

Urea-rich sodium alginate-based hydrogel fertilizer as a water reservoir and slow-release N carrier for tomato cultivation under different water-deficit levels

In this study, a new eco-friendly urea-rich sodium alginate-based hydrogel with a slow-release nitrogen property was prepared, and its effectiveness was evaluated in the cultivation of tomato plants under different water stress levels. The structure and performance of the hydrogel were investigated by FTIR, XRD, TGA, DTG, and SEM. The swelling and release experiments showed that prepared urea-rich hydrogel exhibited a high-water holding capacity (412 ± 4 g/g) and showed a sustained and slow nitrogen release property. A greenhouse pot experiment was conducted using two hydrogel levels (0.1 and 0.5 wt%) under two water deficit levels (30 and 70 % based on required water irrigation). Germination tests indicated that the developed hydrogel fertilizer has no phytotoxicity and has a positive impact on the germination rate even under water deficit conditions. The application of hydrogel fertilizer at 0.5 wt% significantly (p > 0.05) enhanced plant growth parameters such as leaf number, chlorophyll content, stem diameter, and plant length compared to the control treatment. The magnitude of the responses to the hydrogel fertilizer application depended on the concentration of applied hydrogel fertilizer and stress severity with the most positive effects on the growth and yield of tomato observed at a level of 0.5 %. Tomato yield was significantly enhanced by 19.58 %-12.81 %, 18.58 %-22.02 %, and 39.38 %-43.18 % for the plant amended with hydrogel at 0.1-0.5 wt% and grown under water deficit levels of 0, 30, and 70 %, respectively, compared to the control treatment.

Ecofriendly Controlled-Release Insecticide Carrier: pH-/Temperature-Responsive Rosin-Derived Hydrogels for Avermectin Delivery against Mythimna separata (Walker)

The exploration of environmentally friendly, less toxic, sustained-release insecticide is increasing with the growing demand for food to meet the requirements of the expanding population. As a sustained-release carrier, the unique, environmentally friendly intelligent responsive hydrogel system is an important factor in improving the efficiency of insecticide utilization and accurate release. In this study, we developed a facile approach for incorporating the natural compound rosin (dehydroabietic acid, DA) and zinc ions (Zn2+) into a poly(N-isopropylacrylamide) (PNIPAM) hydrogel network to construct a controlled-release hydrogel carrier (DA-PNIPAM-Zn2+). Then, the model insecticide avermectin (AVM) was encapsulated in the carrier at a drug loading rate of 36.32% to form AVM@DA-PNIPAM-Zn2+. Surprisingly, the smart controlled carrier exhibited environmental responsiveness, strongly enhanced mechanical properties, self-healing ability, hydrophobicity, and photostability to ensure a balance between environmental friendliness and the precision of the drug release. The release experiments showed that the carboxyl and amide groups in the polymer chains alter the intermolecular forces within the hydrogel meshes and ingredient diffusion by changing temperatures (25 and 40 °C) and pH values (5.8, 7.4, and 8.5), leading to different release behaviors. The insecticidal activity of the AVM@DA-PNIPAM-Zn2+ against oriental armyworms was good, with an effective minimum toxicity toward aquatic animals. Therefore, AVM@DA-PNIPAM-Zn2+ is an effective drug delivery system against oriental armyworms. We anticipate that this ecofriendly, sustainable, smart-response carrier may broaden the utilization rosin and its possible applications in the agricultural sector.

Functionally responsive hydrogels with salt-alkali sensitivity effectively target soil amelioration

The long-standing crisis of soil salinization and alkalization poses a significant challenge to global agricultural development. High soil salinity-alkalinity, water dispersion, and nutrient loss present major hurdles to soil improvement. Novel environmentally friendly gels have demonstrated excellent water retention and slow-release capabilities in agricultural enhancement. However, their application for improving saline-alkali soil is both scarce and competitive. This study proposes a new strategy for regulating saline-alkali soil using gel-coated controlled-release soil modifiers (CWR-SRMs), where radical-polymerized gels are embedded on the surface of composite gel beads through spray coating. Characterization and performance analysis reveal that the three-dimensional spatial network structure rich in hydrophilic groups exhibits good thermal stability (first-stage weight loss temperature of 257.7 °C in thermogravimetric analysis) and encapsulation efficiency for fulvic acid‑potassium (FA-K), which can enhance soil quality in saline-alkali environments. The molecular chain relaxation under saline-alkali conditions promotes a synergistic effect of swelling and slow release, endowing it with qualifications as a water reservoir, Ca2+ source unit, and slow-release body. The results of a 6 weeks incubation experiment on 0-20 cm saline-alkaline soil with different application gradients showed that the gradient content had a significant effect on the soil improvement effect. Specifically, the T2 (the dosage accounted for 1 % of soil mass) treatment significantly increases water retention (30 % ~ 90 %), and nutrient levels (30 % ~ 50 %), while significantly decreasing soil sodium colloid content (30 % ~ 60 %) and soil pH (10 % ~ 15 %). Furthermore, PCA analysis indicates that the addition of 1 % CWR-SRMs as amendments can significantly adjust the negative aspects of soil salinity and alkalinity. This highlights the excellent applicability of CWR-SRMs in improving saline-alkali agricultural ecosystems, demonstrating the potential value of novel environmentally friendly gels as an alternative solution for soil challenges persistently affected by adverse salinity and alkalinity.

Progress in the Preparation of Stimulus-Responsive Cellulose Hydrogels and Their Application in Slow-Release Fertilizers

Agriculture is facing challenges such as water scarcity, low fertilizer utilization, food security and environmental sustainability. Therefore, the development of slow-release fertilizer (SRF) with controlled water retention and release is particularly important. Slow-release fertilizer hydrogel (SRFH) has a three-dimensional (3D) network structure combined with fertilizer processing, displaying excellent hydrophilicity, biocompatibility and controllability. Cellulose has abundant hydroxyl groups as well as outstanding biodegradability and special mechanical properties, which make it a potential candidate material for the fabrication of hydrogels. This work would analyze and discuss various methods for preparing stimulus-responsive cellulose hydrogels and their combinations with different fertilizers. Moreover, the application and release mechanism of stimulus-responsive cellulose hydrogels in SRF have been summarized as well. Finally, we would explore the potential issues of stimulus-responsive cellulose hydrogels serving as an SRF, propose reasonable solutions and give an outlook of the future research directions.

Biomimetic and Multifunctional Hemostatic Hydrogel with Rapid Thermoresponsive Gelation and Robust Wet Adhesion for Emergency Hemostasis: A Rational Design Based on Photo-Cross-Linking Coordinated Hydrophilic-Hydrophobic Balance Strategies

Uncontrolled bleeding in emergency situations is a great threat to both military and civilian lives, and an ideal hemostat for effectively controlling prehospital hemorrhage is urgently needed but still lacking. Although hemostatic hydrogels are promising for emergency hemostasis, they are currently challenged by either the mutual exclusion between a short gelation time and strong adhesive network or the insufficient functionality of ingredients and complicated operations for in situ curing. Herein, an extracellular matrix biopolymer-based and multifunctional hemostatic hydrogel that simultaneously integrates rapid thermoresponsive gelation, robust wet adhesion, and ease of use in emergencies is rationally engineered. This hydrogel can be conveniently used via simple injection and achieves instant sol-gel phase transition at body temperature. Its comprehensive performance could be facilely regulated by tuning the proportions of components, and the optimal performance (gelation time 6-8 s, adhesion strength 125 ± 3.6 kPa, burst pressure 282 ± 4.1 mmHg) is established due to the coordinated enhancement of the photo-cross-linking pretreatment and the hydrophilic-hydrophobic balance among various interactions in the hydrogel system. Additionally, it exhibits significant coagulation effect in vitro and enables effective hemostasis and wound healing in vivo. This work provides a promising platform for versatile applications of hydrogel-based materials, including emergency hemostasis.

Cellulose-based slow-release nitrogen fertilizers: Synthesis, properties, and effects on pakchoi growth

The application of most slow-release fertilizers is limited by complex preparation processes and short slow-release periods. In this study, carbon spheres (CSs) were prepared by a hydrothermal method using cellulose as the raw material. Using CSs as the fertilizer carrier, three new carbon-based slow-release nitrogen fertilizers were prepared using direct mixing (SRF-M), water-soluble immersion adsorption (SRFS), and co-pyrolysis (SRFP) methods, respectively. Examination of the CSs revealed regular and ordered surface morphology, enrichment of functional groups on the surfaces, and good thermal stability. Elemental analysis showed that SRF-M was rich in nitrogen (total nitrogen content of 19.66 %). Soil-leaching tests showed that the total cumulative nitrogen release of SRF-M and SRF-S was 55.78 % and 62.98 %, respectively, which greatly slowed down the release of nitrogen. Pot experiment results revealed that SRF-M significantly promoted the growth of pakchoi and improved crop quality. Thus, SRF-M was more effective in practical applications than the other two slow-release fertilizers. Mechanistic studies showed that CN, -COOR, pyridine-N and pyrrolic-N participated in nitrogen release. This study thus provides a simple, effective, and economical method for the preparation of slow-release fertilizers, providing new directions for further research and the develop of new slow-release fertilizers.

Specific Alcohol-Responsive Photonic Crystal Sensors Based on Host-Guest Recognition

A photonic crystal material based on β-cyclodextrin (β-CD) with adsorption capacity is reported. The materials ((A-β-CD)-AM PC) consist of 3D poly (methyl methacrylate) (PMMA) colloidal microsphere arrays and hydrogels supplemented with β-cyclodextrin modified by acryloyl chloride. The prepared materials are then utilized for VOCs gas sensing. The 3D O-(A-β-CD)-AM PC was used to detect toluene, xylene, and acetone and the response was seen as the red-shift of the reflection peak. The 3D I-(A-β-CD)-AM PC was used to detect toluene, xylene, and acetone which occurred redshifted, while methanol, ethanol, and propanol and the peaks' red-shifting was observed. However, among these, methanol gave the largest red-shift response The sensor has broad prospects in the detection of alcohol and the detection of alcohol-loaded drug releases in the future.

Innovative bio-waste-based multilayer hydrogel fertilizers as a new solution for precision agriculture

The aim of the research work was to present a multilayer hydrogel capsule with controlled nutrient release properties as an innovative fertilizer designed for sustainable agriculture. Preparation of the capsules included the following steps: sorption of micronutrients (Cu, Mn, Zn) on eggshells (1) and their immobilization in sodium alginate, with the crosslinking agent being the NPK solution (2). The capsules were coated with an additional layer of a mixture of biopolymers (0.79% alginate, 0.24% carboxymethylcellulose and 8.07% starch)by means of dipping and spraying techniques. The biocomposites were characterized by limited (<10% within 100 h for the structures encapsulated by the dipping method) release of fertilizer ions (except for small K⁺ ions). The hydrogel fertilizer formulations were analyzed for physicochemical properties such as macro- and micronutrient content, surface morphology analysis, coating structure evaluation, mechanical properties, swelling and drying kinetics. High nutrient bioavailability was confirmed in vitro (extraction in water and neutral ammonium citrate). Germination and pot tests have revealed that the application of multicomponent hydrogel fertilizers increases the length of cucumber roots by 20%, compared to the commercial product.

Fe-Based Metal-Organic Frameworks for the Controlled Release of Fertilizer Nutrients

Due to the controlled-delivery function of metal-organic frameworks (MOFs) for gases, drugs, and pesticides, iron-based MOFs (Fe-MOFs) were explored in the laboratory as a novel fertilizer, which showed potential for use in the fertilizer industry; the challenge in the industrial scale application of Fe-MOFs in practical crop production was mainly the impact of scaling-up to energy and heat transfer, as well as the reaction yield. In this study, Fe-MOFs were hydrothermally synthesized both in the laboratory scale and in the pilot scale, their structure and components were characterized using various spectroscopic techniques, and then their nutrient release and degradation behaviors were investigated. The results showed that Fe-MOFs were successfully synthesized in both scales with similar yields around 27%, and the Fe-MOFs showed a similar structure with the molecular formula of C₂H₁₅Fe₂N₂O₁₈P₃. The nutrients N, P, and Fe were present in the Fe-MOFs with the average contents of 6.03, 14.48, and 14.69%, respectively. Importantly, the nutrient release rate and pattern of Fe-MOFs well matched with the crop growth, which greatly promoted the rice yield. Therefore, the environmentally friendly compounds of Fe-MOFs could be industrially produced and used as an innovative fertilizer with unique features of varied nutrients and controlled release.

Hydrogel Improved Growth and Productive Performance of Mango Trees under Semi-Arid Condition

Nowadays, the production of new mango cultivars is increased in many countries worldwide. The soil application of hydrogel represents a novel approach in the fruit trees industry. This investigation aims to study the effect of adding hydrogel (as soil conditioner) on the growth and yield of Shelly cv. mango trees. The experimental groups were assigned to a control group and three other treated groups, including 250, 500, or 750 g hydrogel∙tree-1. The results demonstrated that all applications of hydrogel composite had higher vegetative growth parameters, yield, and fruit quality characteristics of Shelly cv. mango trees compared to the control. The treatment of 750 g hydrogel∙tree-1 had higher values of vegetative growth parameters such as the leaf area, shoot length and tree canopy volume, compared to the control group and the other treatments. Similarly, higher values for yield and fruit quality were observed in the treatment of 750 g hydrogel∙tree-1. In conclusion, different amounts of hydrogel agent can improve the production and fruit quality of Shelly cv. mango trees in arid and semi-arid conditions in a dose-dependent manner.

Preparation and Characterization of Novel Microgels Containing Nano-SiO2 and Copolymeric Hydrogel Based on Poly (Acrylamide) and Poly (Acrylic Acid): Morphological, Structural and Swelling Studies

In this paper, novel microgels containing nano-SiO₂ were prepared by in situ copolymerization using nano-SiO₂ particles as a reinforcing agent, nanosilica functional monomer (silane-modified nano-SiO₂) as a structure and morphology director, acrylamide (AAm) as a monomer, acrylic acid (AAc) as a comonomer, potassium persulfate (KPS) as a polymerization initiator, and N,N'-methylene bis (acrylamide) (MBA) as a crosslinker. In addition, a conventional copolymeric hydrogel based on poly (acrylamide/acrylic acid) was synthesized by solution polymerization. The microgel samples, hydrogel and nanoparticles were characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). A FESEM micrograph of copolymeric hydrogel showed the high porosity and 3D interconnected microstructure. Furthermore, FESEM results demonstrated that when nano-SiO₂ particles were used in the AAm/AAc copolymerization process, the microstructure and morphology of product changed from porous hydrogel to a nanocomposite microgel with cauliflower-like morphology. According to FESEM images, the copolymerization of AAm and AAc monomers with a nanosilica functional monomer or polymerizable nanosilica particle as a seed led to a microgel with core-shell structure and morphology. These results demonstrated that the polymerizable vinyl group on nano-SiO₂ particles have controlled the copolymerization and the product morphology. FTIR analysis showed that the copolymeric chains of polyacrylamide (PAAm) and poly (acrylic acid) (PAAc) were chemically bonded to the surfaces of the nano-SiO₂ particles and silane-modified nano-SiO₂. The particulate character of microgel samples and the existence of long distance among aggregations of particles led to rapid swelling and increasing of porosity and therefore increasing of degree of swelling.

Effect of highly efficient substrate modifier, super-absorbent polymer, on the performance of the green roof

Green roofs are commonly used in sponge city construction. However, the limitations of substrate thickness and strong sunlight have caused water retention to become the primary problem in the promotion of this technology. Super-absorbent polymer (SAP) is a material with excellent water absorption capacity that is expected to improve the substrate to solve the problem of the insufficient water storage capacity of green roofs. In this study, the basic performances of two types of SAPs, namely polyacrylate sylvite and acrylic acid-attapulgite hybrid (P-SAP and A-SAP, respectively), were evaluated on a bench-scale. The results showed that both SAPs had good water absorption, reusability, and fertilizer protection ability. These SAPs could maintain high water absorption within a certain range of salinity, pH, and temperature. Although water absorption of P-SAP was higher than that of A-SAP, the latter showed a significant advantage in substrate modification. After adding A-SAP (application rate: 0.6%, particle size: 12 mesh), the water storage capacity of the substrate was significantly improved, with an increase in the saturation moisture content of 23.8% and a decrease in the infiltration rate of 48.5%. A simulator of green roof was constructed with A-SAP under optimal conditions. The enhancement of the water retention capacity increased the drought resistance of the plants, which improved their growth; in particular, the fresh weight was 98% higher than that of the control group. A-SAP increased the rate of building up the lawn by 25%. The average soil moisture of the A-SAP group was 63.3%, which was 10.0% higher than that of the control group. An increase of more than 26% in the runoff control capacity was found in the green roof with A-SAP. Overall, our study indicates that A-SAP is a practical and efficient modifier for green roofs.

Efficient reclamation phosphate by alginate-g-BMOF using poly(N-isopropyl acrylamide-co-acrylamide) as coating for temperature-responsive slow-release P-fertilizer

Poly(N-isopropyl acrylamide) and its derived copolymer, as a temperature-responsive material, are widely used in the field of anticancer drug carrier. And it also plays an important role as carrier in slow-release fertilizer in recent years. In this paper, a smart poly(N-isopropyl acrylamide-co-acrylamide)-coated Alg-BMOF (PABMOF) was fabricated in ionic liquids microemulsion ([Bmim]PF₆/TX-100/water) as nano-reactor. The structure and morphology of PABMOF were characterized by FT-IR, XRD, XPS, SEM, TG and BET. The resultant PABMOF was used as a adsorbent for H₂PO₄^- adsorption. The adsorption kinetics, isotherms and mechanism of H₂PO₄^- onto the resultant PABMOF were studied. The adsorption kinetic data was well suitable for pseudo-second-order kinetic model, and adsorption isotherm results demonstrated that the equilibrium data was fitted for Freundlich model. The water-holding and water-retention capacity of soil with TRSRFs addition of 2 wt% were74.3% and 52.13% at 30th day, respectively. Moreover, the release behavior of TRSRFs in water show that the cumulative release rate (C_r%) were 81.4% at 45 °C and 97.6% at 25 °C within 172 h, which displayed the excellent temperature-responsive property. The effect of TRSRFs on the growth of Chinese cabbage was investigated, which was indexed with the germination rate, plant height and root length of the crop.

Preparation and characterization of starch-cellulose interpenetrating network hydrogels based on sequential Diels-Alder click reaction and photopolymerization

Herein, starch-cellulose interpenetrating network (IPN) hydrogels were fabricated by sequential Diels-Alder click reaction and photopolymerization in water. Moreover, β-cyclodextrin, a commonly used host molecule in supramolecular chemistry, was also introduced to improve the performance of the IPN hydrogel. Firstly, the starch-based dienes were synthesized by modifying starch with N-maleoyl-β-alanine, and the cellulose-based dienophiles were obtained by the reaction of cellulose and furfurylamide succinate; Secondly, the as-synthesized starch-based dienes, cellulose-based dienophiles, polymerizable β-cyclodextrin, crosslinker, and acrylamide were dissolved in water and obtained a transparent solution. The solution was maintained in a water bath of 50 °C for 3 h, forming the first network via catalyst-free click Diels-Alder reaction, subsequently, the second network was formed by photopolymerization. Their preparation conditions were optimized via one-factor experiments and their properties and structures were characterized. Finally, 5- fluorouracil (5-Fu) was used as a model drug to study the sustained release behavior of the drug-loaded hydrogels. Release profile was found to fit in Ritger-Peppas kinetic model and polymer relaxation and drug diffusion made a valuable contribution to drug release. Taking into account the virtues of easily controllable photopolymerization and catalyst-free Diels-Alder reaction, the strategy described here has a potential application in the preparation of IPN hydrogels.

A TEMPO-oxidized cellulose nanofibers/MOFs hydrogel with temperature and pH responsiveness for fertilizers slow-release

In this work, a kind of MOF MIL-100(Fe)@CNFs hydrogel (MC) based on TEMPO-oxidized cellulose nanofibers (CNFs) for fertilizers slow-release was prepared by free-radical polymerization, where N-vinyl caprolactam (NVCL) and CNFs were involved to exhibit temperature and pH response, respectively. Particularly, porous MIL-100(Fe), a kind of metal organic frameworks (MOFs), was introduced to optimize the load and slow-release capabilities. The Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and thermogravimetric analysis were used to characterize. The swelling behaviors and water-retention capabilities of hydrogels were evaluated. Using urea as the model fertilizer, the slow-release mechanism was revealed. Wheat was used as the model crop to evaluate the practical growth status. Compared with MC-0% hydrogels, the MC-10% hydrogels exhibited a better swelling capacity (37 g/g), water-retention (22.78%) and slow-release performance (40.84%). It also exhibited sensitivities to temperature and pH for regulating urea release. Besides, the number of tillers and leaves of wheat fertilized with MC hydrogels significantly increased, as did the photosynthetic rate. In conclusion, the MC-0% hydrogels had a positive influence on crops growth, and promoted the possible utilization of hydrogels in slow-release fertilizers.

Controlled release fertilizer: A review on developments, applications and potential in agriculture

Controlled release fertilizer (CRF) plays a crucial yet necessary part in the sustainable agriculture industry. An alarming rise in call for crop production directly influences the increasing need for synthetically derived fertilizers and pesticides production. The application of CRF has been a gamechanger as an environmentally sustainable pathway to increase crop yields by paving desired phase of plant growth via a direct or indirect mechanism. The mechanism of CRF does not only decreases nutrient dissipation due to volatilization and leaching, but also provides a precisely appropriate nutrient release design that is suitable in the physiological and biochemical aspect of the plant growth. However, CRF is not deployed on larger scale of commercial agriculture practices due to being expensive, has relatively low efficiency in releasing nutrients and its coatings are largely composed of petroleum-based synthetic polymers. Alternatively, there are many polymers derived from renewable and biodegradable sources that can be used as coating material for CRF in the form of bio-nanocomposites. Having said that, there is an apparent gap between the mechanism of the CRFs for promoting plant growth and the prominent role of the nanocomposites especially bio-nanocomposites as coating material for CRF synthesis, thus the importance of nanotechnology application in enhancing the effectiveness of CRF. Therefore, this review attempts to bridge the stated gap and summarizes the comprehensive developments, application mechanisms and future potential of CRF as a fertilizer for crop sustainability.

Synthesis and application of eco-friendly superabsorbent composites based on xanthan gum and semi-coke

An eco-friendly superabsorbent composites of xanthan gum-g-polyacrylic acid/semi-coke (XG-g-PAA/SC) were fabricated via grafting of polyacrylic acid onto the XG in the presence of SC. The obtained products were characterized in combination with Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The result indicated that the SC interacted with the polymeric network by hydrogen bond or electrostatic interaction. The swelling ratio of the best sample XG-g-PAA/SC (15 wt%) in distilled water and 0.9 wt% NaCl solution was 410.8 and 61.5 g/g by optimizing the polymerization conditions. In addition, compared with the blank sample (only containing soil), it can be found that adding a certain amount of XG-g-PAA/SC can significantly improve the soil water retention efficiency, which can be further proved by the results of plant pot experiment. Based on the above excellent swelling capacity, water holding capacity and plant growth promoting performance, it can be inferred that the XG-g-PAA/SC is expected to become a water retaining agent or soil regulator for plant growth.