Application of Nanofibers Based on Natural Materials as Catalyst in Organic Reactions

Surface-engineered natural fibers: Emerging alternative substrates for chemical sensor applications: A review

Natural fiber has become one of the most widely used alternative materials for chemical sensor fabrication due to its advantages, such as biocompatibility, flexibility, and self-microfluidic properties. Enhanced natural fiber surface has been used as a substrate in colorimetric and electrochemical sensors. This review focuses on improving the natural fiber properties for preparation as a substrate for chemical sensors. Various methods for natural fiber extraction are discussed and compared. Bleaching and decolorization is important for preparation of colorimetric sensors, while carbonization and nanoparticle doping are favorable for increasing their electrical conductivity for electrochemical sensor fabrication. Also, example fabrications and applications of natural fiber-based chemical sensors for chemical and biomarker detection are discussed. The selectivity of the sensors can be introduced and improved by surface modification of natural fiber, such as enzyme immobilization and biorecognition element functionalization, illustrating the adaptability of natural fiber as a smart sensing device, e.g., wearable and portable sensors. Ultimately, the high performances of natural fiber-based chemical sensors indicate the potential uses of natural fiber as a renewable and eco-friendly substrate material in the field of chemical sensors and biosensors for clinical diagnosis and environmental monitoring.

Utilization of carbon-based nanomaterials for wastewater treatment and biogas enhancement: A state-of-the-art review

The management of environmental pollution and carbon dioxide (CO2) emissions is a challenge that has spurred increased research interest in determining sustainable alternatives to decrease biowaste. This state-of-the-art review aimed to describe the preparation and utilization of carbon-based nanomaterials (CNM) for biogas enhancement and wastewater contaminant (dyes, color, and dust particles) removal. The novelty of this review is that we elucidated that the performance of CNMs in the anaerobic digestion (AD) varies from one system to another. In addition, this review revealed that increasing the pyrolysis temperature can facilitate the transition from one CNM type to another and outlined the methods that can be used to develop CNMs, including arc discharge, chemical exfoliation, and laser ablation. In addition, this study showed that methane (CH4) yield can be slightly increased (e.g. from 33.6% to 60.89%) depending on certain CNM factors, including its type, concentration, and feedstock. Temperature is a fundamental factor involved in the method and carbon sources used for CNM synthesis. This review determined that graphene oxide is not a good additive for biogas and CH4 yield improvement compared with other types of CNM, such as graphene and carbon nanotubes. The efficacy of CNMs in wastewater treatment depends on the temperature and pH of the solution. Therefore, CNMs are good adsorbents for wastewater contaminant removal and are a promising alternative for CO2 emissions reduction. Further research is necessary to determine the relationship between CNM synthesis and preparation costs while accounting for other factors such as gas flow, feedstock, consumption time, and energy consumption.

Electrospun nanofibers for 3-D cancer models, diagnostics, and therapy

As one of the leading causes of global mortality, cancer has prompted extensive research and development to advance efficacious drug discovery, sustained drug delivery and improved sensitivity in diagnosis. Towards these applications, nanofibers synthesized by electrospinning have exhibited great clinical potential as a biomimetic tumor microenvironment model for drug screening, a controllable platform for localized, prolonged drug release for cancer therapy, and a highly sensitive cancer diagnostic tool for capture and isolation of circulating tumor cells in the bloodstream and for detection of cancer-associated biomarkers. This review provides an overview of applied nanofiber design with focus on versatile electrospinning fabrication techniques. The influence of topographical, physical, and biochemical properties on the function of nanofiber assemblies is discussed, as well as current and foreseeable barriers to the clinical translation of applied nanofibers in the field of oncology.

Effect of activator/precursor mass ratio on sulfur-doped porous carbon for catalytic oxidation of aqueous organics with persulfate

Sulfur-doped porous carbon has emerged as promising metal-free catalysts toward persulfate (PS) for catalytic oxidation of aqueous organics. Wherein, thermal pyrolysis with activator activation is very common for the preparation of activated carbon. However, the relationship between the mass ratio of activator/precursor and catalytic efficiency has been rarely reported. Herein, a series of sulfur-doped porous carbons (S-AC) were synthesized by one-step chemical activation of (Poly(phenylene sulphide) (PPS)) with K₂CO₃ as activator at K₂CO₃/PPS mass ratio ranging from 0 to 3. The effects of K₂CO₃/PPS mass ratio on its physicochemical properties and its catalytic performance for p-chlorophenol (PCP) degradation with PS were comprehensively investigated. Experiment results show that sulfur doping enhanced its catalytic activity and the sample synthesized with K₂CO₃/PPS mass ratio of 2 (S-AC-2) exhibited the best adsorption and catalytic performance toward PS for PCP removal. More importantly, S-AC-2 with PS could efficiently degrade various aqueous toxic organics other than PCP, and S-AC-2 showed superior catalytic activity to many recently reported advanced materials. In addition, the effects of several operate parameters, including reaction temperature, PS concentration, pH, humic acid, and inorganic ions on PCP oxidation were evaluated. By combining with the results of quenching experiments and EPR, the PS activation mechanism over S-AC-2 was revealed. Moreover, the reusability and regenerability of S-AC-2 was also studied. It indicates that S-AC-2 showed inferior reusability, but the catalytic activity of which could be fully recovered through thermal treatment at 600 °C for 2 h in N₂.