Particulate matters removal by using cotton coated with isomeric metal-organic frameworks (MOFs): Effect of voidage of MOFs on removal

MIL-101(Fe) based biomass as permeable reactive barrier applied to EK-PRB remediation of antimony contaminated soil

Numerous studies have demonstrated that electrokinetic-permeable reactive barrier (EK-PRB) can be used for the remediation of heavy metal contaminated soils, and their remediation efficiency is mainly determined by the filler material selected. By growing MIL-101(Fe) in situ on hollow loofah fiber (HLF), a novel material entitled HLF@MIL-101(Fe) was developed. The morphological characteristics and loading conditions were investigated, the adsorption characteristics were analyzed, and finally the synthesized composite material was applied to treat antimony-contaminated soil with EK-PRB as the reaction medium. The results show that MIL-101(Fe) is stably loaded on HLF. The adsorption capacity of Sb(III) can reach up to 82.31 mg g^-1, and the adsorption is in accordance with the quasi-secondary kinetic model, which indicates that chemisorption is dominant. The isothermal adsorption model indicates that the adsorption form of HLF@MIL-101(Fe) is mainly monolayer adsorption with more uniform adsorption binding energy. In the EK-PRB experiment, when ethylenediaminetetraacetic acid (EDTA) is used as the cathodic electrolyte, it can effectively enhance the electromigration and electroosmotic effects, and the overall remediation efficiency of the soil is increased by 38.12% compared with the citric acid (CA) group. These demonstrate the feasibility of HLF@MIL-101(Fe) in collaboration with EK-PRB in the treatment of antimony-contaminated soil.

Pore creation nanoarchitectonics from non-porous metal-organic framework to porous carbon for adsorptive elimination of sulfanilamide and chloroxylenol from aqueous solution

Three isomeric metal-organic frameworks (MOFs) such as MAF-5, - 6, and - 32 (with the same composition of [Zn(2-ethylimidazole)₂]) were carbonized and, for the first time, activated further with KOH to prepare highly porous MOF-derived carbons (MDCs). Importantly, MDC-32 derived from non-porous MAF-32 had the highest porosity among the three MDCs although it has the lowest porosity when no KOH activation was done. Adsorption of sulfanilamide and chloroxylenol from water was investigated with the MDCs. Among the MDCs, MDC-32 showed the best adsorptive performance for sulfanilamide and chloroxylenol. Moreover, MDC-32, had the highest adsorption capacity (256 mg/g) for removing sulfanilamide from water, compared with any adsorbent reported so far. Based on the observed adsorption and properties of the adsorbate and adsorbent, π-π and hydrogen bonding interactions, with a slight contribution of repulsive electrostatic interaction, could be suggested as the mechanism for the sulfanilamide adsorption over the MDC-32. Moreover, the MDC-32 could be recycled easily for up to four cycles. It could be suggested that non-porous MOFs can be a good precursor for highly porous MDCs, if activated well using KOH, for example. Finally, MAF-32-derived carbon, MDC-32, might be suggested as a plausible adsorbent to eliminate organics such as sulfanilamide from water.

Advances in particulate matter filtration: Materials, performance, and application

Air-borne pollutants in particulate matter (PM) form, produced either physically during industrial processes or certain biological routes, have posed a great threat to human health. Particularly during the current COVID-19 pandemic, effective filtration of the virus is an urgent matter worldwide. In this review, we first introduce some fundamentals about PM, including its source and classification, filtration mechanisms, and evaluation parameters. Advanced filtration materials and their functions are then summarized, among which polymers and MOFs are discussed in detail together with their antibacterial performance. The discussion on the application is divided into end-of-pipe treatment and source control. Finally, we conclude this review with our prospective view on future research in this area.

Removal of Particulate Matters by Using Zeolitic Imidazolate Framework-8s (ZIF-8s) Coated onto Cotton: Effect of the Pore Size of ZIF-8s on Removal

Removal of particulate matter (PM) like PM2.5 and PM10 from air was carried out with cotton coated with metal-organic frameworks (MOFs) having various pore sizes to understand the effect of the pore size of MOFs (here, ZIF-8s) on the performances in PM elimination. Both removal efficiency and quality factor, based on the unit surface area of ZIF-8s, in the filtration of PMs with ZIF-8/cotton did not rely considerably on the pore size of ZIF-8s. More importantly, small pores (even less than 0.5 nm) of conventional MOFs like ZIF-8 are more than enough in the elimination of large PMs like PM10 with a size of microns probably because small active sites (such as polar functional groups) on PMs can interact with porous materials having polarity. Additionally, electrostatic interactions between PMs and porous materials could be confirmed as a plausible mechanism for PM removal with ZIF-8/cotton.

Ionic Salts@Metal-Organic Frameworks: Remarkable Component to Improve Performance of Fabric Filters to Remove Particulate Matters from Air

The elimination of particulate matters (PMs) from the air is very important for our sustainability. In this study, highly porous metal-organic frameworks (MOFs) like MIL-101 and UiO-67 were first modified, coated onto cotton, and applied in PM removal via filtration. Ionic salts (ISs) like CaCl₂ and LiCl, after loading onto the MOFs, remarkably increased the PM removal efficiency. For example, CaCl₂(20)@MIL-101/cotton shows 5.7 times the quality factor (QF, which is the most important parameter in filtration) of that of bare cotton and has the most competitive performances in PM removal (with the highest QF of 0.085 Pa^-1) compared to any filter modified with porous materials or commercial filters. The noticeable performances of ISs@MOFs can be explained by the contribution of charge separation (that is effective for electrostatic interactions with PMs) of ISs and the high porosity of MOFs. Moreover, how MOFs with small pores of a few nanometers or less can remove large PMs with sizes in the micron range could be explained. Finally, loading ISs onto highly porous materials can be a promising strategy to improve the performances of filters to remove PMs from the air.