Research status and development trend of three-dimensional colloidal crystals

Shaping in the Third Direction: Colloidal Photonic Crystals with Quadratic Surfaces Self-Assembled by Hanging-Drop Method

High-quality, 3D-shaped, SiO2 colloidal photonic crystals (ellipsoids, hyperboloids, and others) were fabricated by self-assembly. They possess a quadratic surface and are wide-angle-independent, direction-dependent, diffractive reflection crystals. Their size varies between 1 and 5 mm and can be achieved as mechanical-resistant, free-standing, thick (hundreds of ordered layers) objects. High-quality, 3D-shaped, polystyrene inverse-opal photonic superstructures (highly similar to diatom frustules) were synthesized by using an inside infiltration method as wide-angle-independent, reflective diffraction objects. They possess multiple reflection bands given by their special architecture (a torus on the top of an ellipsoid) and by their different sized holes (384 nm and 264 nm). Our hanging-drop self-assembly approach uses setups which deform the shape of an ordinary spherical drop; thus, the colloidal self-assembly takes place on a non-axisymmetric liquid/air interface. The deformed drop surface is a kind of topological interface which changes its shape in time, remaining as a quality template for the self-assembly process. Three-dimensional-shaped colloidal photonic crystals might be used as devices for future spectrophotometers, aspheric or freeform diffracting mirrors, or metasurfaces for experiments regarding space-time curvature analogy.

Photon Management Enabled by Opal and Inverse Opal Photonic Crystals: from Photocatalysis to Photoluminescence Regulation

Light is a promising renewable energy source and can be converted into heat, electricity, and chemical energy. However, the efficiency of light-energy conversion is largely hindered by limited light-absorption coefficients and the low quantum yield of current-generation materials. Photonic crystals (PCs) can adjust the propagation and distribution of photons because of their unique periodic structures, which offers a compelling platform for photon management. The periodicity of materials with an alternating refractive index can be used to manipulate the dispersion of photons to generate the photonic bandgap (PBG), in which light is reflected. The slow photon effect, i. e., photon propagation at a reduced group velocity near the edges of the PBG, is widely regarded as another valuable optical property for manipulating light. Furthermore, multiple light scattering can increase the optical path, which is a vital optical property for PCs. Recently, the light reflected by PBG, the slow photon effect, and multiple light scattering have been exploited to improve light utilization efficiency in photoelectrochemistry, materials chemistry, and biomedicine to enhance light-energy conversion efficiency. In this review, the fabrication of opal or inverse opal PCs and the theory for improving the light utilization efficiency of photocatalysis, solar cells, and photoluminescence regulation are discussed. We envision photon management of opal or inverse opal PCs may provide a promising avenue for light-assisted applications to improve light-energy-conversion efficiency.

Three-Dimensional Photonic Crystals Based on Porous Anodic Aluminum Oxide

Photonic crystals (PCs) consisting of a periodic arrangement of holes in dielectric media have found success in light manipulation and sensing. Among them, three-dimensional (3D) PCs are in high demand due to their unique properties originating from multiple photonic band gaps (PBGs) and even full ones. Here, 3D PCs based on porous anodic aluminum oxide (AAO) were fabricated for the first time. Our approach involves prepatterning of the aluminum surface by a focused ion beam to form a hexagonal array of pore nuclei. Subsequent anodization in 1 M H3PO3 using a sine wave profile of voltage provides AAO with a defect-free in-plane porous structure and out-of-plane porosity modulation. The ability to tune the position, width, and depth of the PBGs is demonstrated. The combination of the flexibility of the proposed approach with the unique properties of AAO extends the range of practical applications of 3D PCs far beyond the current achievements.

Bioinspired Confined Assembly of Cellulosic Cholesteric Liquid Crystal Bubbles

Construction of biomimetic models for structural color evolution not only gives new photonic phenomena but also provide cues for biological morphogenesis. Here, a novel confined self-assembly method is proposed for the generation of hydroxypropyl cellulose (HPC)-based cholesteric liquid crystals (CLCs) microbubbles. The assembly process relies on the combination of droplet microfluidics, solvent extraction, and a volume confined environment. The as-prepared HPC structural color microbubbles have a transparent shell, an orderly arranged cholesteric liquid crystal (CLC) middle layer, and an innermost bubble core. The size of the microbubble, shell thickness, and the color of the CLC layer can be adjusted by altering the microfluidic parameters. Intriguingly, benefited from the compartmentalization effect provided by droplet microfluidics, microbubbles with multiple cores of different color combinations are generated under precise control. The self-assembled CLCs microbubbles have bright structural color, suspending ability, and good temperature-sensitive characteristics, making them ideal underwater sensors. The present confined assembly approach will shed light on creating novel photonic structures and the HPC microbubble will find widespread applications in multifunctional sensing, optical display, and other related fields are believed.

Template-induced crystallization of charged colloids: a molecular dynamics study

By using a large enough number of particles and implementing a parallel algorithm on the CUDA platform, we have performed brute-force molecular dynamics simulations to study the template-induced heterogeneous crystallization in charged colloids. Six kinds of templates, whose patterns include the planes of fcc(100), fcc(110), fcc(111), bcc(100), bcc(110) and bcc(111), have been implanted into the middle of the simulation box. Except the fcc(111) template, whose structure benefits not only fcc but also hcp crystals resulting in a similar behavior to homogeneous crystallization, bcc-type templates favor the formation of bcc crystals and bcc-like precursors while fcc-type templates favor the formation of fcc crystals and fcc-like precursors. Therefore, for fcc(100) and fcc(110) templates, heterogeneous crystallization will definitely result in a fcc crystallite. However, the results of heterogeneous crystallization that are induced by bcc-type templates are subtly different at different state points. At the state points where the interaction strength of charged colloids is weak and the fcc phase is thermodynamically stable, the bcc crystals formed with the promotion of bcc-type templates are not stable so as to tend to transform into fcc or hcp crystals. When the interaction strength of charged colloids is high, the predominant bcc crystals formed with the promotion of bcc-type templates can always persist within the time scale of simulation although not bcc but fcc crystals are thermodynamically stable.

Recent Progress of Three-dimensionally Ordered Macroporous (3DOM) Materials in Photocatalytic Applications: A Review

In recent years, three-dimensionally ordered macroporous (3DOM) materials have attracted tremendous interest in the field of photocatalysis due to the periodic spatial structure and unique physicochemical properties of 3DOM catalysts. In this review, the fundamentals and principles of 3DOM photocatalysts are briefly introduced, including the overview of 3DOM materials, the photocatalytic principles based on 3DOM materials, and the advantages of 3DOM materials in photocatalysis. The preparation methods of 3DOM materials are also presented. The structure and properties of 3DOM materials and their effects on photocatalytic performance are briefly summarized. More importantly, 3DOM materials, as a supported catalyst, are extensively employed to combine with various common materials, including metal nanoparticles, metal oxides, metal sulfides, and carbon materials, to enhance photocatalytic performance. Finally, the prospects and challenges for the development of 3DOM materials in the field of photocatalysis are presented.

Engineered inverse opal structured semiconductors for solar light-driven environmental catalysis

Inverse opal (IO) macroporous semiconductor materials with unique physicochemical advantages have been widely used in solar-related environmental areas. In this minireview, we first summarize the synthetic methods of IO materials, emphasizing the two-step and three-step approaches, with the typical physicochemical properties being compared where applicable. We subsequently discuss the application of IO semiconductors (e.g., TiO₂, ZnO, g-C₃N₄) in various photo-related environmental techniques, including photo- and photoelectro-catalytic organic pollutant degradation in water, optical sensors for environmental monitoring, and water disinfection. The engineering strategies of these hierarchical structures for optimizing the activities for different catalytic reactions are discussed, ranging from heterojunction construction, cocatalyst loading, and heteroatom doping, to surface defect construction. Structure-activity relationships are established correspondingly. With a systematic understanding of the unique properties and catalytic activities, this review is expected to orient the design and structure optimization of IO semiconductor materials for photo-related performance improvement in various environmental techniques. Finally, the challenges of emerging IO structured semiconductors and future development directions are proposed.

Shaping in the Third Direction; Fabrication of Hemispherical Micro-Concavity Array by Using Large Size Polystyrene Spheres as Template for Direct Self-Assembly of Small Size Silica Spheres

Silica and polystyrene spheres with a small size ratio (r = 0.005) form by sequential hanging drop self-assembly, a binary colloidal crystal through which calcination transforms in a silica-ordered concavity array. These arrays are capable of light Bragg diffraction and shape dependent optical phenomena, and they can be transformed into inverse-opal structures. Hierarchical 2D and 3D super-structures with ordered concavities as structural units were fabricated in this study.

Two-dimensional colloidal crystal of soft microgel spheres: Development, preparation and applications

Two-dimensional (2D) colloidal crystals are ordered monolayer arrays of colloidal sphere particles assembled on the substrates or at phase interfaces. Owing to their unique periodic structure and fascinating properties, 2D colloidal crystals have aroused considerable interest because of their potential applications. Among them, 2D colloidal crystals self-assembled from soft microgel spheres stand out particularly. The 2D colloidal crystals of soft microgel spheres combine the advantages of monolayer colloidal crystals and sensitive microgels, which have a good application prospect in biomedical area. In this article, we provide a systematic overview of 2D colloidal crystals of soft microgel spheres related to their development, preparation and applications. First, various preparation methods of 2D colloidal crystal of microgels are introduced, including dip-coating, drop-coating, spin-coating, interface assembly, surface reaction-assisted assembly, and so forth. Second, representative biomedical applications consisting of optical sensor, drug delivery, antibacterial coating, cell culture, and colloidal template are also exemplified to show the high performance of 2D colloidal crystals of soft microgel spheres. In addition, we also present prospects of future developments of 2D microgel colloidal crystals.

Crystallization of charged gold particles mediated by nonadsorbing like-charged polyelectrolyte

We report that the aqueous dispersions of negatively charged submicron-sized colloidal Au particles formed non-close-packed colloidal crystals by the addition of a like-charged linear polyelectrolyte, sodium polyacrylate (NaPAA). Au particles often form irregular aggregates in dispersions because of a strong van der Waals force acting between them. To prevent aggregation, we introduced negative electric charges on particle surfaces. By the addition of NaPAA, colloidal crystals were formed on the bottom of a sample cell because of the supply of Au particles by sedimentation and 2D diffusion even under very dilute conditions. Interparticle potential calculations demonstrated that the addition of NaPAA caused depletion attraction between the particles as well as a significant reduction in the interparticle repulsion because of the electrostatic screening effect. However, the electrostatic repulsion was strong enough to prevent the direct contact of particles in the excluded region between Au particles. Large-area crystals could be obtained by tilting the sample cell. By drying the sample, the Au particles came into contact and the non-space-filling crystals changed into closest packed crystals. These closest packed crystals exhibited a significant enhancement of Raman scattering intensity because of high hot-spot density.