Developed a high-performance sensor based on cumarin derivative for rapid and sensitive detection of palladium ion in organic wastewater

Rational design of a highly effective cellulose-based macromolecular fluorescent probe for real-time recognition of palladium ion in environmental samples and its applications in plant and zebrafish

Palladium ion (Pd2+) plays an important role in our daily life, but poses a great threat to the environment and human health. Thus, it is desirable to exploit a rapid and sensitive approach to realize the detection of Pd2+. In this study, a cellulose acetate-based macromolecular fluorescent probe CA-NA-PA was successfully prepared for tracking amounts of Pd2+. CA-NA-PA showed an obvious "on-off" fluorescence response to Pd2+, accompanied by the fluorescence color changed from bright yellow to colorless. CA-NA-PA had some outstanding detection performances such as low detection limit (26 nM), extremely short response time (1 min), good selectivity and anti-interference ability. Based on the advantages of probe mentioned above, CA-NA-PA could realize recognition of Pd2+ concentration in environmental water and soil samples. What's more, the probe CA-NA-PA was applied to image Pd2+ in zebrafish as well as in live onion tissue due to the good biocompatibility and cell membrane permeability of cellulose, suggesting its wide application prospect in biosystems.

Two-photon fluorescence probe for palladium with perchlorate induced quenching mechanism and its application in smartphone-based rapid detection

We propose a new approach for detecting palladium using a two-photon fluorescent probe quenched by perchlorate. This newly developed method has the potential to overcome some of the limitations of the currently available methods for detecting palladium. This article provides a detailed introduction to the design and synthesis of fluorescent probe, as well as the fluorescence performance in aqueous solutions. The results demonstrate the probe is highly sensitive, selective, and efficient in detecting palladium. The study also includes a thorough analysis of the quenching mechanism of the probe by perchlorate, and obtained different results from previous literatures. Moreover, the probe can easily identify and differentiate between palladium being present in the valence states 0, + 2/+ 4, and accomplish detecting palladium in convoluted solutions such as wastewater, environmental water, Hela cells and zebrafish. Due to its excellent performance, using self-developed optical device, the possibility of detecting palladium in aqueous solutions based on smartphone was explored.

Optimization of rapid self-healing and self-adhesive gluten/guar gum crosslinked gel for strain sensors and electronic devices

In this study, a smart strain sensor based on gluten/guar gum (GG) copolymer containing a combination of additives was developed. The mix proportions of strain sensors were designed using Taguchi method coupled with Grey relational analysis. L16 orthogonal array with three factors, viz. tannic acid (TA), glycerol and sodium chloride (NaCl) at four-levels each was optimized. The addition of TA substantially enhanced tensile strength, self-adhesion ability and conductivity. The self-adhesion ability could also be improved by adding NaCl in range of 0-5 wt%. The presence of glycerol in strain sensors could reduce the self-healing time which was found in the range of 28.75-150 s. In addition, the incorporation of glycerol into gel also improved stretchability of strain sensors. The best mix proportion of strain sensor was found to be 3.75 wt% TA, 30 vol% glycerol and 5 wt% NaCl. The best mixture of stain sensor showed the highest gauge factor (GF) of 0.61 % at a stretchability of 665 % and rapid self-healing at 70 s. This strain sensor could be applied to monitor human limb movements in a wide temperature range from -20 °C to 50 °C. Furthermore, the obtained gel was successfully used as electronic devices and self-powered sensors.

Simple Coumarin-Based Fluorescent Probe for Recognition of Pd(II) and Its Live Cell Imaging

A simple coumarin hydrazine Schiff base bearing a thioether recognition fragment (compound CBBS) has been rationally designed and easily prepared. CBBS exhibited an excellent selectivity for Pd(II) and a low detection limit of 65 nM (S/N = 3). The fluorescence emission intensities of CBBS at 495 nm were linear to Pd(II) concentrations in a wide range from 0 to 80 μM. Moreover, CBBS has been well used in fluorescence imaging of Pd(II) in living A549 cells. CBBS as a simple coordination-based fluorescent probe will inspire the researchers to develop a polymer for selective detection and adsorption of Pd(II).

A novel fluorescent molecule based on 1,2,3-triazole for determination of palladium (II) and hydrazine hydrate in aqueous system

In recent years, hydrazine hydrate has been widely used in various fields as fuel and chemical raw materials, etc. However, hydrazine hydrate is also a potential threat to living body and natural environment. The effective method is urgently needed to detect hydrazine hydrate in our living environment. Secondly, as a precious metal, palladium has attracted more and more attention because of its excellent properties in industrial manufacturing and chemical catalysis. However, its potential danger is also slowly approaching, so it is necessary to find an excellent way to detect palladium, too. Herein, a fluorescent molecule, 4,4',4'',4'''-(1,4-phenylenebis(2H-1,2,3-triazole-2,4,5-triyl)) tetrabenzoic acid (NAT), was synthesized. Firstly, NAT has very high selectivity and sensitivity for determination of Pd²⁺, because Pd²⁺ can coordinate well with carboxyl oxygen of NAT. The detection performance of Pd²⁺ is that the linear range is from 0.06 to 4.50 μM and the detection limit is 16.4 nM. Furthermore, the chelate (NAT-Pd²⁺) can continue to be used for quantitative determination of hydrazine hydrate with a linear range of 0.05-6.00 μM and the detection limit is 19.1 nM. The interaction time of NAT-Pd²⁺ and hydrazine hydrate is about 10 min. Of course, it also has good selectivity and strong anti-interference ability for many common metal ions, anions and amine like compounds. At last, the ability of NAT to quantitatively detect Pd²⁺ and hydrazine hydrate in actual samples has also been verified and the results are very satisfactory.

Preparation of carbon quantum dots from ionic liquid modified biomass for the detection of Fe3+ and Pd2+ in environmental water

A new type of green carbon quantum dots (ILB-CQDs) was prepared by hydrothermal method using ionic liquid as a modifier and grape skin as carbon source, and was obtained from hydrogen-bonded lattice structure ionic liquid preparation, which makes the CQDs in a ring-like stable structure with a stability period of more than 90 day. There is also the catalytic effect of the ionic liquid on cellulose, which makes the prepared CQDs show good advantages, such as uniform particle size, high quantum yield (26.7%), and very good fluorescence performance. This is a smart material for the selective detection of Fe³⁺ and Pd²⁺. It has a detection limit of 0.001 nM for Fe³⁺ and 0.23 µM for Pd²⁺ in pure water. It has a detection limit of 3.2 nmol/L for Fe³⁺ and 0.36 µmol/L for Pd²⁺ in actual water, both of which meet the requirements of WHO drinking water standards. And there is to achieve more than 90% of water restoration effect.

Photoluminescent polymer micelles with thermo-/pH-/metal responsibility and their features in selective optical sensing of Pd(ii) cations

Photoluminescent polymers can be divided into two types of structures: one is the well-known conventional π-conjugated rigid chain polymers bearing π-conjugated chromophores in their side chains, and the other is the common flexible polymers without π-conjugated chromophores in their main or side chains but with a feature of clustering electron-rich and/or dipole groups in their main and/or side chains. In this work, we found a new photoluminescent polymer comprising theophylline (T) and imidazole (I) residues in a suitable ratio in the side chains on the common polystyrenic block (PVB-T/I). We synthesized a block copolymer (denoted as P2) consisting of hydrophobic PVB-T/I and hydrophilic poly(N-isopropylacrylamide), and we investigated its self-assembly into micelles and their micellar features, such as thermo-responsibility, fluorescence emission, pH, and metal ion-dependent photoluminescence, in detail. Especially, the micelles self-assembled from P2 showed intrinsic blue emission which was emitted from the charge transfer association between T and I residues in the intra-chains. Weakening the association by adjustment of the pH or addition of metal ions could evidently reduce the photoluminescence in the micellar state. Very interestingly, among many metal cations, only Pd2+, which can chelate strongly with theophylline, strongly quenched the photoluminescence from the micelles. Therefore, the polymer micelles functioned as an optical sensor for Pd(ii) ion not only by spectroscopy but also with the naked eye.