Magnetic recyclable self-floating solar light-driven WO2.72/Fe3O4 nanocomposites immobilized by Janus membrane for photocatalysis of inorganic and organic pollutants

Construction of cellulose-based hybrid hydrogel beads containing carbon dots and their high performance in the adsorption and detection of mercury ions in water

Cellulose-based adsorbents have been extensively developed in heavy metal capture and wastewater treatment. However, most of the reported powder adsorbents suffer from the difficulties in recycling due to their small sizes and limitations in detecting the targets for the lack of sensitive sensor moieties in the structure. Accordingly, carbon dots (CDs) were proposed to be encapsulated in cellulosic hydrogel beads to realize the simultaneous detection and adsorption of Hg (II) in water due to their excellent fluorescence sensing performance. Besides, the molding of cellulose was beneficial to its recycling and further reduced the potential environmental risk generated by secondary pollution caused by adsorbent decomposition. In addition, the detection limit of the hydrogel beads towards Hg (II) reached as low as 8.8 × 10-8 M, which was below the mercury effluent standard declared by WHO, exhibiting excellent practicability in Hg (II) detection and water treatment. The maximum adsorption capacity of CB-50 % for Hg (II) was 290.70 mg/g. Moreover, the adsorbent materials also had preeminent stability that the hydrogel beads could maintain sensitive and selective sensing performance towards Hg (II) after 2 months of storage. Additionally, only 3.3% of the CDs leaked out after 2 weeks of immersion in water, ensuring the accuracy of Hg (II) evaluation. Notably, the adsorbent retained over 80% of its original adsorption capacity after five consecutive regeneration cycles, underscoring its robustness and potential for sustainable environmental applications.

Floating photocatalysts as promising materials for environmental detoxification and energy production: A review

The oxygenation process of the catalyst surface, the incident-light harvesting capability, and facile recycling of utilized photocatalysts play key role in the outstanding photocatalytic performances. The typical existing photocatalysts in powder form have many drawbacks, such as difficult separation from the treated water, insufficient surface oxygenation, poor active surface area, low incident-light harvesting ability, and secondary pollution of the environment. A great number of scientific works introduced novel and fresh ideas related to designing floating photocatalytic systems by immobilizing highly active photocatalysts onto a floatable substrate. Thanks to direct contact with the illuminated light and oxygen molecules in the interface of water/air, the photocatalytic performance is maximized through production of more reactive species, employed in the photocatalytic reactions. Furthermore, facile recovering of the utilized photocatalysts for next processes avoids secondary pollution as well as diminishes the process's price. This review highlights the performance of developed floating photocatalysts for diverse applications. Furthermore, different floating substrates and possible mechanisms in floating photocatalysts are briefly mentioned. In addition, several emerging self-floating photocatalytic systems are taken attention and discussed. Specially, coupling photo-thermal and photocatalytic effects seems to be a good strategy for introducing a new class of floating photocatalyst to utilize the free, abundant, and green sunlight energy for the aims of water desalination and purification. Despite of a large number of attempts about the floating photocatalysts, there are still plenty of rooms for more in-depth research to be carried out for attaining the required characteristics of the large scale utilizations of these materials.

The mechanism of water pollutant photodegradation by mixed and core-shell WO3/TiO2 nanocomposites

Environmental pollution is one of the biggest concerns in the world today, and solar energy-driven photocatalysis is a promising method for decomposing pollutants in aqueous systems. In this study, the photocatalytic efficiency and catalytic mechanism of WO₃-loaded TiO₂ nanocomposites of various structures were analyzed. The nanocomposites were synthesized via sol-gel reactions using mixtures of precursors at various ratios (5%, 8%, and 10 wt% WO₃ in the nanocomposites) and via core-shell approaches (TiO₂@WO₃ and WO₃@TiO₂ in a 9 : 1 ratio of TiO₂ : WO₃). After calcination at 450 °C, the nanocomposites were characterized and used as photocatalysts. The kinetics of photocatalysis with these nanocomposites for the degradation of methylene blue (MB⁺) and methyl orange (MO^-) under UV light (365 nm) were analyzed as pseudo-first-order reactions. The decomposition rate of MB⁺ was much higher than that of MO^-, and the adsorption behavior of the dyes in the dark suggested that the negatively charged surface of WO₃ played an important role in adsorbing the cationic dye. Scavengers were used to quench the active species (superoxide, hole, and hydroxyl radicals), and the results indicated that hydroxyl radicals were the most active species; however, the active species were generated more evenly on the mixed surfaces of WO₃ and TiO₂ than on the core-shell structures. This finding shows that the photoreaction mechanisms could be controlled through adjustments to the nanocomposite structure. These results can guide the design and preparation of photocatalysts with improved and controlled activities for environmental remediation.

Highly Efficient Solar Light Driven g-C3N4@Cs0.33WO3 Heterojunction for the Photodegradation of Colorless Antibiotics

This study facilitates the synthesis of a graphitic carbon nitride/cesium tungsten oxide (g-C₃N₄@Cs_0.33WO₃) heterojunction using a solvothermal method. The photocatalytic activities of the prepared samples were examined for the photodegradation of colorless antibiotics, namely tetracycline, enrofloxacin, and ciprofloxacin, as well as cationic and anionic dyes, such as methyl orange, rhodamine B, neutral red, and methylene blue, under full-spectrum solar light. We have purposely selected different kinds of wastewater pollutants of colorless antibiotics and cationic and anionic organic dyes to investigate the potential application of this heterojunction toward different groups of water pollutants. The results revealed that the g-C₃N₄@Cs_0.33WO₃ heterojunction showed an outstanding photocatalytic activity toward all the pollutants with concentrations of 20 ppm each at pH 3 by photocatalytically removing 97% of tetracycline within 3 h, 98% of enrofloxacin within 2 h, 97% of ciprofloxacin within 2.25 h, 98% of methylene blue in 1 h, 99% of rhodamine B within 2 h, 99% of neutral red in 1.25 h, and 95% of methyl orange in 2 h. These findings indicate that the developed photocatalyst possesses excellent photocatalytic properties toward seven different water pollutants that make it a universal photocatalyst. The developed g-C₃N₄@Cs_0.33WO₃ oxide heterojunction also presented a photocatalytic performance better than those of reported solar light active photocatalysts for photodegradation of rhodamine B and tetracycline. The efficient photocatalytic performance of the heterojunction can be ascribed to its extended light-absorbing ability, effective charge separation and fast charge transfer properties, and a high surface area. Moreover, an active species detection experiment also confirmed that superoxide radicals, hydroxyl radicals, and holes played significant roles in the photocatalysis of the organic dyes and tetracycline.

Bibliometric analysis of global research progress on electrochemical degradation of organic pollutants

As a result of anthropogenic action, an increasing amount of toxic organic compounds has been released into the environment. These pollutants have adverse effects on human health and wildlife, which has motivated the development of different types of technologies for the treatment of effluents and contaminated environments. The electrochemical degradation of organic pollutants has attracted the interest of research centers around the world for its environmental compatibility, high efficiency, and affordable cost. In the present study, a bibliometric analysis was performed using the Web of Science database in order to assess the progress of publications related to electrochemical degradation of organic pollutants between the years 2001 and 2021. The data retrieved showed a significant increase in publications related to the topic in the last 20 years. Electrochimica Acta was the magazine responsible for the largest number of publications (291, 6.52%). The studies mainly included the areas of engineering, chemistry, and environmental science ecology. China with a total of 1472 (32.96%) publications dominated research in this area, followed by Spain (436, 9.76%) and Brazil (345, 7.72%). The institutions with the highest number of contributions were the University of Barcelona and the Chinese Academy of Sciences, and the most productive authors were Brillas E. and Oturan M. A. The results of this study provide important references and information on possible research directions for future investigations on electrochemical degradation of organic pollutants.

Anchoring bismuth oxybromo-iodide solid solutions on flexible electrospun polyacrylonitrile nanofiber mats for floating photocatalysis

Constructing floating photocatalysts with highly efficient visible-light utilization is a promising approach for practical photocatalytic wastewater treatment. In this study, we anchored bismuth oxybromo-iodide (BiOBr_xI_1-x (0 ≤ x ≤ 1)) on flexible electrospun polyacrylonitrile (PAN) nanofiber mats to create BiOBr_xI_1-x@PAN nanofibers with tunable light absorption properties as floating photocatalysts at room temperature. As x increased, the photocatalytic activity of the BiOBr_xI_1-x@PAN nanofibers with similar loading content initially increased, and then decreased, for the degradation of bisphenol A (BPA) and methyl orange (MO) under visible-light irradiation (λ > 420 nm) conditions. The BiOBr_xI_1-x@PAN (0 < x < 1) nanofibers exhibited better photocatalytic performance compared to the BiOBr@PAN and BiOI@PAN nanofibers. Under visible-light irradiation, the BPA degradation rate of the BiOBr_0.5I_0.5@PAN nanofibers was 1.9 times higher than that of the BiOI@PAN nanofibers, while the BiOBr@PAN nanofibers had no noticeable degradation performance. The MO degradation rate of the BiOBr_0.5I_0.5@PAN nanofibers was 2.5 and 3.2 times higher than that of the BiOBr@PAN and BiOI@PAN nanofibers, respectively. The enhanced performance possibly originated from a balance between the light absorption and redox capabilities, along with efficient separation of electron-hole pairs in the BiOBr_0.5I_0.5@PAN nanofibers, as determined by ultraviolet-visible diffuse reflectance spectroscopy, X-ray photoelectron spectra analysis of the valence bands, and photocurrent response characterization. Compared to the powder structures, the BiOBr_xI_1-x@PAN nanofibers showed enhanced performance due to the excellent dispersion and immobilization of the BiOBr_xI_1-x solid solution, which provided more active sites during photocatalytic degradation. In addition, their flexible self-supporting structures allowed for floating photocatalysis near the water surface. They could be reused directly without separation and maximized the absorption of visible light during the photocatalytic reaction. Therefore, these solid-solution-based floatable nanofiber photocatalysts are good potential candidates for wastewater treatment applications.