Carbon Nanodots: Synthesis, Mechanisms for Bio-electrical Applications

Recent Developments in Nanocomposite Membranes Based on Carbon Dots

Carbon dots (CDs) have aroused colossal attention in the fabrication of nanocomposite membranes ascribed to their ultra-small size, good dispersibility, biocompatibility, excellent fluorescence, facile synthesis, and ease of functionalization. Their unique properties could significantly improve membrane performance, including permeance, selectivity, and antifouling ability. In this review, we summarized the recent development of CDs-based nanocomposite membranes in many application areas. Specifically, we paid attention to the structural regulation and functionalization of CDs-based nanocomposite membranes by CDs. Thus, a detailed discussion about the relationship between the CDs' properties and microstructures and the separation performance of the prepared membranes was presented, highlighting the advantages of CDs in designing high-performance separation membranes. In addition, the excellent optical and electric properties of CDs enable the nanocomposite membranes with multiple functions, which was also presented in this review.

Nitrogen and bromine co-doped carbon dots with red fluorescence for sensing of Ag+ and visual monitoring of glutathione in cells

Carbon dots (CDs) with red fluorescence emission have excellent advantages in cell imaging. Herein, novel nitrogen and bromine doped CDs (N,Br-CDs) were prepared with 4-bromo-1,2-phenylenediamine as precursor. The N, Br-CDs present the optimal emission wavelength at 582 nm (λ_ex = 510 nm) at pH 7.0 and 648 nm (λ_ex = 580 nm) at pH 3.0 ∼ 5.0, respectively. The fluorescence intensity of N,Br-CDs at 648 nm versus Ag⁺ concentration shows a good relationship from 0 to 60 μM with the limit of detection (LOD) of 0.14 μM. Furthermore, the fluorescence of N,Br-CDs/Ag⁺ is efficiently restored via the combination of glutathione (GSH) and Ag⁺ and linearly changes with GSH concentration from 0 ∼ 6.0 μM with LOD of 49 nM. This method has been successfully employed to monitor intracellular Ag⁺ and GSH with fluorescence imaging. The results suggest that the N,Br-CDs has application potential in the sensing of Ag⁺ and visual monitoring of GSH in cells.

Silanized fiberglass modified by carbon dots as novel and impressive adsorbent for aqueous heavy metal ion removal

This work discusses the application of a silanized fiberglass (SFG) modified by carbon dots (CDs) as an effective adsorbent for up-taking some heavy metal ions including lead (Pb²⁺), chromium (Cr³⁺), cadmium (Cd²⁺), cobalt (Co²⁺), and nickel (Ni²⁺) as pollutant in the aqueous solution by batch method. Removal tests were carried out after optimization of pH, contact time, initial concentration of metal ions, and CDs amount. The SFG modified with CDs (CDs-SFG) was applied for the removal of 10 ppm of each metal ion solution after 100 min and the corresponding results showed the removal efficiencies of 100, 93.2, 91.8, 90, and 88.3% for Pb²⁺, Cd²⁺, Cr³⁺, Co²⁺, and Ni²⁺, respectively. The adsorption capacity of CDs-SFG in the metal ion mixed solution was also evaluated, and the results indicated the same trend in the adsorption capacity for metal ions in the mixed solution, though with lower absolute values compared to the single metal solutions. Moreover, the selectivity of this adsorbent for the adsorption of Pb²⁺ was almost twice of other tested metal ions. The regeneration of the CDs-SFG showed that its adsorption capacity after five cycles was reduced about 3.9, 6.0, 6.8, 6.7, and 8.0% for Pb²⁺, Cd²⁺, Cr³⁺, Co²⁺, and Ni²⁺, respectively. Finally, the applicability of the CDs-SFG adsorbent was examined with the analysis of the metal ions in water and wastewater samples.