Novel amperometric immunosensor for rapid separation-free immunoassay of carcinoembryonic antigen

Impedimetric aptasensor based on MOF based composite for measuring of carcinoembryonic antigen as a tumor biomarker

In this research, gold nanoparticle (GNPs)-modified metal-organic framework/reduced graphene oxide (MOF(801)/rGO) hybrid was employed to design a new aptasensor for carcinoembryonic antigen (CEA) quantification in biological sample. The sensing ability of the electrode for CEA biomarker was examined with electrochemical impedance spectroscopy (EIS) and cyclic voltammetry procedures. Besides, CEA was electrochemically quantified by the EIS method. With respect to the high surface-to-volume ratio of MOF(801) and the good electron transfer ability of rGO, the proposed sensor displayed notable sensitivity and reliability in the CEA analysis. The derived electrode showed an appreciable detection limit of 0.8 pg L-1 using EIS protocol. In addition, the present aptasensor revealed diverse advantages including anti-interference property, wide linear range (0.0025-0.25 ng L-1), convenience and high efficiency toward CEA quantification. More importantly, the performance of the suggested assay remains unchanged in analysis of CEA in body fluids. The established assay demonstrates that the suggested biosensor is a promising device in clinical diagnosis.

Impedimetric Detection Based on Label-Free Immunoassay Developed for Targeting Spike S1 Protein of SARS-CoV-2

After the COVID-19 pandemic started all over the world, great importance was placed on the development of sensitive and selective bioanalytical assays for the rapid detection of the highly pathogenic SARS-CoV-2 virus causing COVID-19 disease. In this present work, an impedimetric immunosensor was developed and applied for rapid, reliable, sensitive and selective detection of the SARS-CoV-2 S1 protein. To detect the SARS-CoV-2 virus, targeting of the spike S1 protein was achieved herein by using S1 protein-specific capture antibody (Cab-S1) immobilized screen-printed electrode (SPE) in combination with the electrochemical impedance spectroscopy (EIS) technique. With the impedimetric immunosensor, the detection limit for S1 protein in buffer medium was found to be 0.23 ng/mL (equal to 23.92 amol in 8 µL sample) in the linear concentration range of S1 protein from 0.5 to 10 ng/mL. In the artificial saliva medium, it was found to be 0.09 ng/mL (equals to 9.36 amol in 8 µL sample) in the linear concentration range of S1 protein between 0.1 and 1 ng/mL. The selectivity of the impedimetric immunosensor toward S1 protein was tested against influenza hemagglutinin antigen (HA) in the buffer medium as well as in artificial saliva.

Ultrasensitive sandwich-type electrochemical immunosensor based on trimetallic nanocomposite signal amplification strategy for the ultrasensitive detection of CEA

A novel and ultrasensitive sandwich-type electrochemical immunosensor was designed for the quantitative detection of carcino-embryonic antigen (CEA). This immunosensor was developed by using the trimetallic NiAuPt nanoparticles on graphene nanosheets (NGs) nanosheets (NiAuPt-NGs) as excellent labels and β-cyclodextrin functionalized reduced graphene oxide nanosheets (CD-NGs) as the platform. The CD-NGs with high specific surface area good biocompatibility and the ideal dispersibility was used to capture the primary antibodies (Ab1) efficiently. The trimetallic NiAuPt-NGs nanocomposites were used as the labels for signal amplification, showing better electrocatalytic activity towards the reduction of hydrogen peroxide (H2O2), which is much better than that the monometallic Pt-NGs, bimetallic NiPt-NGs and AuPt-NGs due to the synergetic effect presented in NiAuPt-NGs. The NiAuPt-NGs nanocomposites consist of tightly coupled nanostructures of Au, Ni and Pt, which have neither an alloy nor a core-shell structure. Under the optimal conditions, a linear range from 0.001-100 ng/mL and a low detection limit of 0.27 pg/mL were obtained for CEA. The proposed electrochemical sandwich-type immunosensor may have a promising application in bioassay and it enriches the electrochemical immunoassays.

A review on amperometric-type immunosensors based on screen-printed electrodes

In this brief review, we summarize the recent research activities involved in the development of amperometric-type immunosensors based on screen-printed electrodes (SPEs). We focus on the underlying principle involved in these types of sensors, their fabrication and electrode surface modification. We also discuss the various factors involved in the designing of such immunosensors and how they affect their performances. Finally we provide an insight into the drawbacks associated with these SPEs.

3D sandwich-type prostate specific antigen (PSA) immunosensor based on rGO–MWCNT–Pd nanocomposite

A signal amplifying sandwich-type immunosensor with a wide linear range and a low detection limit is developed with potential clinical and diagnostic applications.

Sandwich-type immunosensors and immunoassays exploiting nanostructure labels: A review

Methods based on sandwich-type immunosensors and immunoassays have been developed for detection of multivalent antigens/analytes with more than one eptiope due to the use of two matched antibodies. High-affinity antibodies and appropriate labels are usually employed for the amplification of detectable signal. Recent research has looked to develop innovative and powerful novel nanoparticle labels, controlling and tailoring their properties in a very predictable manner to meet the requirements of specific applications. This articles reviews recent advances, exploiting nanoparticle labels, in the sandwich-type immunosensors and immunoassays. Routine approaches involve noble metal nanoparticles, carbon nanomaterials, semiconductor nanoparticles, metal oxide nanostructures, and hybrid nanostructures. The enormous signal enhancement associated with the use of nanoparticle labels and with the formation of nanoparticle-antibody-antigen assemblies provides the basis for sensitive detection of disease-related proteins or biomolecules. Techniques commonly rely on the use of biofunctionalized nanoparticles, inorganic-biological hybrid nanoparticles, and signal tag-doped nanoparticles. Rather than being exhaustive, this review focuses on selected examples to illustrate novel concepts and promising applications. Approaches described include the biofunctionalized nanoparticles, inorganic-biological hybrid nanoparticles, and signal tage-doped nanoparticles. Further, promising application in electrochemical, mass-sensitive, optical and multianalyte detection are discussed in detail.

A Renewable Amperometric Immunosensor for hs-CRP Based on Functionalized Fe3O4@Au Magnetic Nanoparticles Attracted on Fe (III) Phthlocyanine/Chitosan-Membrane Modified Screen-Printed Carbon Electrode by a Magnet

A novel disposable screen-printed immunosensor for rapid determination of highly sensitive C reactiveprotein (hs-CRP) in human serum has been developed in the experiment. The sensor was constructed on one screen-printed carbon electrode (SPCE) with HRP labeled anti-hs-CRP antibody functionalized Fe3O4@Au magnetic nanoparticles (HRP labeled anti hs-CRP/ Fe3O4@Au) as the biorecognition probes attracted on the surface of Fe (III) phthalocyanine (FePc)/ chitosan membrane modified screen-printed carbon electrode (SPCE|FePc/Chit/chitosan) by external magnetic field. FePc was acted as electron immediate. The modified electrode shows an excellent electrocatalytic activity for hs-CRP in phosphate buffer solution (pH=7.0). After the immunosensor is incubated with hs-CRP antigen solution at 37°C for 20 min, the access of activity center of the HRP to electrode is partly inhibited, which leads to a linear decrease of the catalytic efficiency of the HRP to the reduction of immobilized FePc by H2O2 at –50 mV in hs-CRP’s concentration ranges from 1.2 to 200 ng/mL. The detection limit was 0.5ng/mL. The immunosensor was successfully utilized for determination of hs-CRP in real serum samples of heart disease patients, whose results were consistent with that by ELISA method. The accuracy and precision of the assay were 91.5-104.4% and 15.8-24.4%, respectively. The immunosensor was reusable once constructed and can be regenerated by adding new nanoprobes on the surface of basal electrode through magnet on its bottom. It can greatly reduce the detection cost which is valuable for the early diagnosis of tumors.

Magneticbead-Based Enzyme-Linked Immunoassay for Detection Carcinoembryonic Antigen in Gastric Cancer Cells

A sensitive immunoassay based on immunomagnetic beads for measuring carcinoembryonic antigen (CEA) concentration in cancer cells was presented in this article. We used immunomagnetic beads to separate CEA in the gastric cancer cells and those CEA could be marked with horseradish peroxidase (HRP) labeled anti-CEA secondary antibody. The HRP could catalyze non-fluorescent 10-acetyl-3,7-dihydroxyphenoxazine (ADHP) with hydrogen peroxide (H2O2) to fluorescent products. Therefore, the CEA concenctration was quanlified by flourescence intensity at 585 nm emission wavelength. The flourescence intensity of the product responged well linearly to CEA concentration in the range from 3.0 to 60 ng/mL with a lower detection limit of 1.5 ng/mL(3σ). This method could be applied to determine tumor markers in gastric cancer cells.

Flow injection chemiluminescent immunoassay for carcinoembryonic antigen using boronic immunoaffinity column

A flow injection chemiluminescence immunoassay for rapid and sensitive detection of carcinoembryonic antigen (CEA) by using a phenylboronic acid-based immunoaffinity column as a glycoprotein collector was proposed in this paper. The column was prepared by coupling of 3-aminophenylboronic acid on the glass beads through a γ-glycidoxypropyltrimethoxysilane (GPMS) linkage. Based on an indirect competitive immunoreaction, the mixture of CEA sample and enzyme conjugated CEA antibody (HRP-anti-CEA) was incubated in advance, followed by direct injection to the column to capture free HRP-labeled CEA antibody in the column. The trapped HRP-labeled antibody was detected by flow inject chemiluminescence in the presence of luminol and hydrogen peroxide. The decreased chemiluminescent signal was proportional to the concentration of CEA in the range of 3.0–30.0 ng/mL with a correlation coefficient of 0.998. The column showed an acceptable reproducibility and stability and is potentially used for practical clinical detection of the serum CEA level.

A sensitive amperometric immunosensor for carcinoembryonic antigen detection with porous nanogold film and nano-Au/chitosan composite as immobilization matrix

A sensitive amperometric immunosensor for carcinoembryonic antigen (CEA) was prepared. Firstly, a porous nano-structure gold (NG) film was formed on glassy carbon electrode (GCE) by electrochemical reduction of HAuCl4 solution, then nano-Au/Chit composite was immobilized onto the electrode because of its excellent membrane-forming ability, and finally the anti-CEA was adsorbed onto the surface of the bilayer gold nanoparticles to construct an anti-CEA/nano-Au/Chit/NG/GCE immunosensor. The characteristics of the modified electrode at different stages of modification were studied by cyclic voltammetry (CV). The gold colloid, chitosan and nano-Au/Chit were characterized by transmission electron microscopy and UV-vis spectroscopy. In addition, the performances of the immunosensor were studied in detail. The resulting immunosensor offers a high-sensitivity (1310 nA/ng/ml) for the detection of CEA and has good correlation for detection of CEA in the range of 0.2 to 120.0 ng/ml with a detection limit of 0.06 ng/ml estimated at a signal-to-noise ratio of 3. The proposed method can detect the CEA through one-step immunoassay and would be valuable for clinical immunoassay.

Electrochemical Biosensors - Sensor Principles and Architectures

Quantification of biological or biochemical processes are of utmost importance for medical, biological and biotechnological applications. However, converting the biological information to an easily processed electronic signal is challenging due to the complexity of connecting an electronic device directly to a biological environment. Electrochemical biosensors provide an attractive means to analyze the content of a biological sample due to the direct conversion of a biological event to an electronic signal. Over the past decades several sensing concepts and related devices have been developed. In this review, the most common traditional techniques, such as cyclic voltammetry, chronoamperometry, chronopotentiometry, impedance spectroscopy, and various field-effect transistor based methods are presented along with selected promising novel approaches, such as nanowire or magnetic nanoparticle-based biosensing. Additional measurement techniques, which have been shown useful in combination with electrochemical detection, are also summarized, such as the electrochemical versions of surface plasmon resonance, optical waveguide lightmode spectroscopy, ellipsometry, quartz crystal microbalance, and scanning probe microscopy. The signal transduction and the general performance of electrochemical sensors are often determined by the surface architectures that connect the sensing element to the biological sample at the nanometer scale. The most common surface modification techniques, the various electrochemical transduction mechanisms, and the choice of the recognition receptor molecules all influence the ultimate sensitivity of the sensor. New nanotechnology-based approaches, such as the use of engineered ion-channels in lipid bilayers, the encapsulation of enzymes into vesicles, polymersomes, or polyelectrolyte capsules provide additional possibilities for signal amplification. In particular, this review highlights the importance of the precise control over the delicate interplay between surface nano-architectures, surface functionalization and the chosen sensor transducer principle, as well as the usefulness of complementary characterization tools to interpret and to optimize the sensor response.

A reusable electrochemical immunosensor for carcinoembryonic antigen via molecular recognition of glycoprotein antibody by phenylboronic acid self-assembly layer on gold

A reusable amperometric immunosensor based on the reversible boronic acid-sugar interaction is proposed. The immunosensor was prepared by self-assembling a thiol-mixed monolayer comprised of conjugates of 3-aminophenylboronic acid with 11-mercaptoundecanoic acid (APBA-MUA) and 11-mercapto-1-undecanol (MU) on gold. The resulting boronic acid coating layer can specifically bind with the glycoprotein antibody, enzyme conjugated carcinoembryonic antibody (HRP-anti-CEA). Voltammetric and electrochemical impedance spectroscopic (EIS) studies and surface plasmon resonance (SPR) measurements show that the binding of HRP-anti-CEA to the APBA interface is reversible and the HRP-anti-CEA can be removed with an acidic buffer or a solution containing sorbitol. The bound enzyme-conjugated antibody can retain its enzyme catalytic activity to the reduction of hydrogen peroxide (H(2)O(2)) and its immunoactivity while binding with CEA to form an immunocomplex. After the formation of the immunocomplex, the access of the active center of HRP to thionine was partially inhibited. This leads to a linear decrease in the electrocatalytic response of HRP-anti-CEA-modified electrode over a CEA concentration range of 2.5 to 40.0 ng mL(-1). After monitoring the immunoreaction signals, the immunocomplex can be easily removed from the APBA interface with a regeneration solution. This regenerated APBA interface can rebound with HRP-anti-CEA and be recognized by the antigen, through which a reusable immunosensor with an RSD of 7.1% for four cycles can be obtained. Under optimal conditions, the detection limit for the CEA immunoassay is 1.1 ng mL(-1), at three times background noise. Serum CEA determination results, obtained with the proposed method, shows that the immunosensor has an acceptable accuracy.

An amperometric immunosensor for separation-free immunoassay of CA125 based on its covalent immobilization coupled with thionine on carbon nanofiber

A carbon nanomaterial, soluble carbon nanofiber, was used for the first time to construct an immunosensor for a rapid separation-free immunoassay. The acidic oxidation of the carbon nanofiber provided its solubility and wettability for convenient preparation of a porous carbon nanofiber membrane and a larger number of active sites for covalent binding of carcinoma antigen-125 (CA125) and thionine as electron transfer mediator. This matrix was a suitable environment for the immobilized protein. The immobilized HRP-labeled immunoconjugate showed good enzymatic activity for the oxidation of thionine by hydrogen peroxide. With a competitive mechanism, the differential pulse voltammetric peak current of this system decreased linearly with increasing CA125 concentration (from 2 to 75 U/ml) in the incubation solution. The CA125 immunosensor showed good precision, high sensitivity, acceptable stability and reproducibility with a detection limit of 1.8 U/ml. The soluble carbon nanofiber is a novel method for preparation of immunosensors.