Domain organization and function of Salmonella FliK, a flagellar hook-length control protein

Structure, Assembly, and Function of Flagella Responsible for Bacterial Locomotion

Many motile bacteria use flagella for locomotion under a variety of environmental conditions. Because bacterial flagella are under the control of sensory signal transduction pathways, each cell is able to autonomously control its flagellum-driven locomotion and move to an environment favorable for survival. The flagellum of Salmonella enterica serovar Typhimurium is a supramolecular assembly consisting of at least three distinct functional parts: a basal body that acts as a bidirectional rotary motor together with multiple force generators, each of which serves as a transmembrane proton channel to couple the proton flow through the channel with torque generation; a filament that functions as a helical propeller that produces propulsion; and a hook that works as a universal joint that transmits the torque produced by the rotary motor to the helical propeller. At the base of the flagellum is a type III secretion system that transports flagellar structural subunits from the cytoplasm to the distal end of the growing flagellar structure, where assembly takes place. In recent years, high-resolution cryo-electron microscopy (cryoEM) image analysis has revealed the overall structure of the flagellum, and this structural information has made it possible to discuss flagellar assembly and function at the atomic level. In this article, we describe what is known about the structure, assembly, and function of Salmonella flagella.

Outer membrane protein of OmpF contributes to swimming motility, biofilm formation, osmotic response as well as the transcription of maltose metabolic genes in Citrobacter werkmanii

Bacterial outer membrane proteins (Omps) are essential for environmental sensing, stress responses, and substance transport. Our previous study discovered that OmpA contributes to planktonic growth, biocide resistance, biofilm formation, and swimming motility in Citrobacter werkmanii, whereas the molecular functions of OmpF in this strain are largely unknown. Thus, in this study, the ompF gene was firstly knocked out from the genome of C. werkmanii using a homologous recombination method, and its phenotypical alternations of ∆ompF were then thoroughly characterized using biochemical and molecular approaches with the parental wild type (WT) and complementary (∆ompF-com) strains. The results demonstrated that the swimming ability of ∆ompF on semi-solid plates was reduced compared to WT due to the down-regulation of flgC, flgH, fliK, and fliF. Meanwhile, ompF deletion reduces biofilm formation on both glass and polystyrene surfaces due to decreased cell aggregation. Furthermore, ompF inactivation induced different osmotic stress (carbon sources and metal ions) responses in its biofilms when compared to WT and ∆ompF-com. Finally, a total of 6 maltose metabolic genes of lamB, malE, malK, malG, malM, and malF were all up-regulated in ∆ompF. The gene knockout and HPLC results revealed that the MalEFGK2 cluster was primarily responsible for maltose transport in C. werkmanii. Furthermore, we discovered for the first time that the upstream promoter of OmpF and its transcription can be combined with and negatively regulated by MalT. Overall, OmpF plays a role in a variety of biochemical processes and molecular functions in C. werkmanii, and it may even act as a targeted site to inhibit biofilm formation.

Molecular and Cell Biological Analysis of SwrB in Bacillus subtilis

Swarming motility is flagellum-mediated movement over a solid surface, and Bacillus subtilis cells require an increase in flagellar density to swarm. SwrB is a protein of unknown function required for swarming that is necessary to increase the number of flagellar hooks but not basal bodies. Previous work suggested that SwrB activates flagellar type III secretion, but the mechanism by which it might perform this function is unknown. Here, we show that SwrB likely acts substoichiometrically as it localizes as puncta at the membrane in numbers fewer than those of flagellar basal bodies. Moreover, the action of SwrB is likely transient as puncta of SwrB were not dependent on the presence of the basal bodies and rarely colocalized with flagellar hooks. Random mutagenesis of the SwrB sequence found that a histidine within the transmembrane segment was conditionally required for activity and punctate localization. Finally, three hydrophobic residues that precede a cytoplasmic domain of poor conservation abolished SwrB activity when mutated and caused aberrant migration during electrophoresis. Our data are consistent with a model in which SwrB interacts with the flagellum, changes conformation to activate type III secretion, and departs. IMPORTANCE Type III secretion systems (T3SSs) are elaborate nanomachines that form the core of the bacterial flagellum and injectisome of pathogens. The machines not only secrete proteins like virulence factors but also secrete the structural components for their own assembly. Moreover, proper construction requires complex regulation to ensure that the parts are roughly secreted in the order in which they are assembled. Here, we explore a poorly understood activator of the flagellar T3SS activation in Bacillus subtilis called SwrB. To aid mechanistic understanding, we determine the rules for subcellular punctate localization, the topology with respect to the membrane, and critical residues required for SwrB function.

Robustness and the evolution of length control strategies in the T3SS and flagellar hook

Bacterial cells construct many structures, such as the flagellar hook and the type III secretion system (T3SS) injectisome, that aid in crucial physiological processes such as locomotion and pathogenesis. Both of these structures involve long extracellular channels, and the length of these channels must be highly regulated in order for these structures to perform their intended functions. There are two leading models for how length control is achieved in the flagellar hook and T3SS needle: the substrate switching model, in which the length is controlled by assembly of an inner rod, and the ruler model, in which a molecular ruler controls the length. Although there is qualitative experimental evidence to support both models, comparatively little has been done to quantitatively characterize these mechanisms or make detailed predictions that could be used to unambiguously test these mechanisms experimentally. In this work, we constructed a mathematical model of length control based on the ruler mechanism and found that the predictions of this model are consistent with experimental data-not just for the scaling of the average length with the ruler protein length, but also for the variance. Interestingly, we found that the ruler mechanism allows for the evolution of needles with large average lengths without the concomitant large increase in variance that occurs in the substrate switching mechanism. In addition to making further predictions that can be tested experimentally, these findings shed new light on the trade-offs that may have led to the evolution of different length control mechanisms in different bacterial species.

The fliK Gene Is Required for the Resistance of Bacillus thuringiensis to Antimicrobial Peptides and Virulence in Drosophila melanogaster

Antimicrobial peptides (AMPs) are essential effectors of the host innate immune system and they represent promising molecules for the treatment of multidrug resistant microbes. A better understanding of microbial resistance to these defense peptides is thus prerequisite for the control of infectious diseases. Here, using a random mutagenesis approach, we identify the fliK gene, encoding an internal molecular ruler that controls flagella hook length, as an essential element for Bacillus thuringiensis resistance to AMPs in Drosophila. Unlike its parental strain, that is highly virulent to both wild-type and AMPs deficient mutant flies, the fliK deletion mutant is only lethal to the latter's. In agreement with its conserved function, the fliK mutant is non-flagellated and exhibits highly compromised motility. However, comparative analysis of the fliK mutant phenotype to that of a fla mutant, in which the genes encoding flagella proteins are interrupted, indicate that B. thuringiensis FliK-dependent resistance to AMPs is independent of flagella assembly. As a whole, our results identify FliK as an essential determinant for B. thuringiensis virulence in Drosophila and provide new insights on the mechanisms underlying bacteria resistance to AMPs.

The flexible linker of the secreted FliK ruler is required for export switching of the flagellar protein export apparatus

The hook length of the flagellum is controlled to about 55 nm in Salmonella. The flagellar type III protein export apparatus secretes FliK to determine hook length during hook assembly and changes its substrate specificity from the hook protein to the filament protein when the hook length has reached about 55 nm. Salmonella FliK consists of an N-terminal domain (FliK_N, residues 1–207), a C-terminal domain (FliK_C, residues 268–405) and a flexible linker (FliK_L, residues 208–267) connecting these two domains. FliK_N is a ruler to measure hook length. FliK_C binds to a transmembrane export gate protein FlhB to undergo the export switching. FliK_L not only acts as part of the ruler but also contributes to this switching event, but it remains unknown how. Here we report that FliK_L is required for efficient interaction of FliK_C with FlhB. Deletions in FliK_L not only shortened hook length according to the size of deletions but also caused a loose length control. Deletion of residues 206–265 significantly reduced the binding affinity of FliK_C for FlhB, thereby producing much longer hooks. We propose that an appropriate length of FliK_L is required for efficient interaction of FliK_C with FlhB.

FliK-Driven Conformational Rearrangements of FlhA and FlhB Are Required for Export Switching of the Flagellar Protein Export Apparatus

FlhA and FlhB are transmembrane proteins of the flagellar type III protein export apparatus, and their C-terminal cytoplasmic domains (FlhA_C and FlhB_C) coordinate flagellar protein export with assembly. FlhB_C undergoes autocleavage between Asn-269 and Pro-270 in a well-conserved NPTH loop located between FlhB_CN and FlhB_CC polypeptides and interacts with the C-terminal domain of the FliK ruler when the length of the hook has reached about 55 nm in Salmonella As a result, the flagellar protein export apparatus switches its substrate specificity, thereby terminating hook assembly and initiating filament assembly. The mechanism of export switching remains unclear. Here, we report the role of FlhB_C cleavage in the switching mechanism. Photo-cross-linking experiments revealed that the flhB(N269A) and flhB(P270A) mutations did not affect the binding affinity of FlhB_C for FliK. Genetic analysis of the flhB(P270A) mutant revealed that the P270A mutation affects a FliK-dependent conformational change of FlhB_C, thereby inhibiting the substrate specificity switching. The flhA(A489E) mutation in FlhA_C suppressed the flhB(P270A) mutation, suggesting that an interaction between FlhB_C and FlhA_C is critical for the export switching. We propose that the interaction between FliK_C and a cleaved form of FlhB_C promotes a conformational change in FlhB_C responsible for the termination of hook-type protein export and a structural remodeling of the FlhA_C ring responsible for the initiation of filament-type protein export.IMPORTANCE The flagellar type III protein export apparatus coordinates protein export with assembly, which allows the flagellum to be efficiently built at the cell surface. Hook completion is an important morphological checkpoint for the sequential flagellar assembly process. The protein export apparatus switches its substrate specificity from the hook protein to the filament protein upon hook completion. FliK, FlhB, and FlhA are involved in the export-switching process, but the mechanism remains a mystery. By analyzing a slow-cleaving flhB(P270A) mutant, we provide evidence that an interaction between FliK and FlhB induces conformational rearrangements in FlhB, followed by a structural remodeling of the FlhA ring structure that terminates hook assembly and initiates filament formation.

The Type III Secretion System of Pathogenic Escherichia coli

Infection with enteropathogenic and enterohaemorrhagic Escherichia coli (EPEC and EHEC), enteroinvasive E. coli (EIEC) and Shigella relies on the elaboration of a type III secretion system (T3SS). Few strains also encode a second T3SS, named ETT2. Through the integration of coordinated intracellular and extracellular cues, the modular T3SS is assembled within the bacterial cell wall, as well as the plasma membrane of the host cell. As such, the T3SS serves as a conduit, allowing the chaperone-regulated translocation of effector proteins directly into the host cytosol to subvert eukaryotic cell processes. Recent technological advances revealed high structural resolution of the T3SS apparatus and how it could be exploited to treat enteric disease. This chapter summarises the current knowledge of the structure and function of the E. coli T3SSs.

The role of intrinsically disordered C-terminal region of FliK in substrate specificity switching of the bacterial flagellar type III export apparatus

The bacterial flagellar export switching machinery consists of a ruler protein, FliK, and an export switch protein, FlhB and switches substrate specificity of the flagellar type III export apparatus upon completion of hook assembly. An interaction between the C-terminal domain of FliK (FliK_C ) and the C-terminal cytoplasmic domain of FlhB (FlhB_C ) is postulated to be responsible for this switch. FliK_C has a compactly folded domain termed FliK_T3S4 (residues 268-352) and an intrinsically disordered region composed of the last 53 residues, FliK_CT (residues 353-405). Residues 301-350 of FliK_T3S4 and the last five residues of FliK_CT are critical for the switching function of FliK. FliK_CT is postulated to regulate the interaction of FliK_T3S4 with FlhB_C , but it remains unknown how. Here we report the role of FliK_CT in the export switching mechanism. Systematic deletion analyses of FliK_CT revealed that residues of 351-370 are responsible for efficient switching of substrate specificity of the export apparatus. Suppressor mutant analyses showed that FliK_CT coordinates FliK_T3S4 action with the switching. Site-directed photo-cross-linking experiments showed that Val-302 and Ile-304 in the hydrophobic core of FliK_T3S4 bind to FlhB_C . We propose that FliK_CT may induce conformational rearrangements of FliK_T3S4 to bind to FlhB_C .

Straight and rigid flagellar hook made by insertion of the FlgG specific sequence into FlgE

The bacterial flagellar hook connects the helical flagellar filament to the rotary motor at its base. Bending flexibility of the hook allows the helical filaments to form a bundle behind the cell body to produce thrust for bacterial motility. The hook protein FlgE shows considerable sequence and structural similarities to the distal rod protein FlgG; however, the hook is supercoiled and flexible as a universal joint whereas the rod is straight and rigid as a drive shaft. A short FlgG specific sequence (GSS) has been postulated to confer the rigidity on the FlgG rod, and insertion of GSS at the position between Phe-42 and Ala-43 of FlgE actually made the hook straight. However, it remains unclear whether inserted GSS confers the rigidity as well. Here, we provide evidence that insertion of GSS makes the hook much more rigid. The GSS insertion inhibited flagellar bundle formation behind the cell body, thereby reducing motility. This indicates that the GSS insertion markedly reduced the bending flexibility of the hook. Therefore, we propose that the inserted GSS makes axial packing interactions of FlgE subunits much tighter in the hook to suppress axial compression and extension of the protofilaments required for bending flexibility.

Type Three Secretion System in Attaching and Effacing Pathogens

Enteropathogenic Escherichia coli and enterohemorrhagic E. coli are diarrheagenic bacterial human pathogens that cause severe gastroenteritis. These enteric pathotypes, together with the mouse pathogen Citrobacter rodentium, belong to the family of attaching and effacing pathogens that form a distinctive histological lesion in the intestinal epithelium. The virulence of these bacteria depends on a type III secretion system (T3SS), which mediates the translocation of effector proteins from the bacterial cytosol into the infected cells. The core architecture of the T3SS consists of a multi-ring basal body embedded in the bacterial membranes, a periplasmic inner rod, a transmembrane export apparatus in the inner membrane, and cytosolic components including an ATPase complex and the C-ring. In addition, two distinct hollow appendages are assembled on the extracellular face of the basal body creating a channel for protein secretion: an approximately 23 nm needle, and a filament that extends up to 600 nm. This filamentous structure allows these pathogens to get through the host cells mucus barrier. Upon contact with the target cell, a translocation pore is assembled in the host membrane through which the effector proteins are injected. Assembly of the T3SS is strictly regulated to ensure proper timing of substrate secretion. The different type III substrates coexist in the bacterial cytoplasm, and their hierarchical secretion is determined by specialized chaperones in coordination with two molecular switches and the so-called sorting platform. In this review, we present recent advances in the understanding of the T3SS in attaching and effacing pathogens.

Regulation of Flagellar Gene Expression in Bacteria

The flagellum of a bacterium is a supramolecular structure of extreme complexity comprising simultaneously both a unique system of protein transport and a molecular machine that enables the bacterial cell movement. The cascade of expression of genes encoding flagellar components is closely coordinated with the steps of molecular machine assembly, constituting an amazing regulatory system. Data on structure, assembly, and regulation of flagellar gene expression are summarized in this review. The regulatory mechanisms and correlation of the process of regulation of gene expression and flagellum assembly known from the literature are described.

The Structure of a Type 3 Secretion System (T3SS) Ruler Protein Suggests a Molecular Mechanism for Needle Length Sensing

The type 3 secretion system (T3SS) and the bacterial flagellum are related pathogenicity-associated appendages found at the surface of many disease-causing bacteria. These appendages consist of long tubular structures that protrude away from the bacterial surface to interact with the host cell and/or promote motility. A proposed "ruler" protein tightly regulates the length of both the T3SS and the flagellum, but the molecular basis for this length control has remained poorly characterized and controversial. Using the Pseudomonas aeruginosa T3SS as a model system, we report the first structure of a T3SS ruler protein, revealing a "ball-and-chain" architecture, with a globular C-terminal domain (the ball) preceded by a long intrinsically disordered N-terminal polypeptide chain. The dimensions and stability of the globular domain do not support its potential passage through the inner lumen of the T3SS needle. We further demonstrate that a conserved motif at the N terminus of the ruler protein interacts with the T3SS autoprotease in the cytosolic side. Collectively, these data suggest a potential mechanism for needle length sensing by ruler proteins, whereby upon T3SS needle assembly, the ruler protein's N-terminal end is anchored on the cytosolic side, with the globular domain located on the extracellular end of the growing needle. Sequence analysis of T3SS and flagellar ruler proteins shows that this mechanism is probably conserved across systems.

Identification of the Key Sequence in the FliK C-Terminal Domain for Substrate Specificity Switching in the Flagellar Protein Secretion

The flagellar hook is a short tubular structure located between the external filament and the membrane-bound basal body. The average hook length is 55 nm and is determined by the soluble protein FliK and the integral membrane protein FlhB. Hook elongation is terminated by FliK-mediated cessation of hook protein secretion, followed by the secretion of filamentous proteins. This process is referred to as the substrate specificity switch. Switching of the secretion modes results from a direct interaction between the FliK C-terminal domain (FliKC) and the secretion gate in FlhB. FliKC consists of two α-helices and four β-strands. Loop 2 connects the first two β-sheets and contains a conserved sequence of 9 residues. Genetic and physiological analyses of various fliK partial deletion mutants pointed to loop 2 as essential for induction of a conformational change in the FlhB gate. We constructed single-amino-acid substitutions in the conserved region of loop 2 of FliK and discovered that the loop sequence LRL is essential for the timely switching of secretion modes.

IMPORTANCE

Flagellar protein secretion is controlled by the soluble protein FliK. We discovered that the loop 2 sequence LRL in the FliK C terminus was essential for timely switching of secretion modes. This mechanism is applicable to type three secretions systems that secrete virulence factors in bacterial pathogens.

[Structure and function of the bacterial flagellar type III protein export system in Salmonella ]

The bacterial flagellum is a filamentous organelle that propels the bacterial cell body in liquid media. For construction of the bacterial flagellum beyond the cytoplasmic membrane, flagellar component proteins are transported by its specific protein export apparatus from the cytoplasm to the distal end of the growing flagellar structure. The flagellar export apparatus consists of a transmembrane export gate complex and a cytoplasmic ATPase ring complex. Flagellar substrate-specific chaperones bind to their cognate substrates in the cytoplasm and escort the substrates to the docking platform of the export gate. The export apparatus utilizes ATP and proton motive force across the cytoplasmic membrane as the energy sources to drive protein export and coordinates protein export with assembly by ordered export of substrates to parallel with their order of assembly. In this review, we summarize our current understanding of the structure and function of the flagellar protein export system in Salmonella enterica serovar Typhimurium.

Weak Interactions between Salmonella enterica FlhB and Other Flagellar Export Apparatus Proteins Govern Type III Secretion Dynamics

The bacterial flagellum contains its own type III secretion apparatus that coordinates protein export with assembly at the distal end. While many interactions among export apparatus proteins have been reported, few have been examined with respect to the differential affinities and dynamic relationships that must govern the mechanism of export. FlhB, an integral membrane protein, plays critical roles in both export and the substrate specificity switching that occurs upon hook completion. Reported herein is the quantitative characterization of interactions between the cytoplasmic domain of FlhB (FlhB_C) and other export apparatus proteins including FliK, FlhA_C and FliI. FliK and FlhA_C bound with micromolar affinity. K_D for FliI binding in the absence of ATP was 84 nM. ATP-induced oligomerization of FliI induced kinetic changes, stimulating fast-on, fast-off binding and lowering affinity. Full length FlhB purified under solubilizing, nondenaturing conditions formed a stable dimer via its transmembrane domain and stably bound FliH. Together, the present results support the previously hypothesized central role of FlhB and elucidate the dynamics of protein-protein interactions in type III secretion.

Molecular ruler determines needle length for the Salmonella Spi-1 injectisome

The type-III secretion (T3S) systems of bacteria are part of self-assembling nanomachines: the bacterial flagellum that enables cells to propel themselves through liquid and across hydrated surfaces, and the injectisome that delivers pathogenic effector proteins into eukaryotic host cells. Although the flagellum and injectisome serve different purposes, they are evolutionarily related and share many structural similarities. Core features to these T3S systems are intrinsic length control mechanisms for external cellular projections: the hook of the flagellum and the injectisome needle. We present evidence that the Spi-1 injectisome, like the Salmonella flagellar hook, uses a secreted molecular ruler, InvJ, to determine needle length. This result supports a universal length control mechanism using molecular rulers for T3S systems.

Role of the Flagellar Hook-Length Control Protein FliK and σ28 in cagA Expression in Gastric Cell-Adhered Helicobacter pylori

Adherence of Helicobacter pylori to the gastric epithelial cell line AGS strongly induces expression of fliK encoding a flagellar hook-length control protein. FliK has a role in triggering dissociation of the alternate sigma factor, σ(28), from a nonfunctional σ(28)-FlgM complex, releasing free, functional σ(28). The σ(28)-RNA polymerase initiates transcription of cagA, the major virulence gene, from a promoter identified in this study. Consequently, significant up-regulation of cagA was observed in AGS-adhered H. pylori. Direct binding of σ(28) to the cagA promoter was demonstrated by chromatin immunoprecipitation and the transcription start site was identified by 5' RACE (rapid amplification of complementary DNA ends). The σ(28)-dependent cagA promoter was active specifically in AGS-adhered H. pylori, and this motif might be associated with high cagA expression and severity of disease. These results also indicate that H. pylori has evolved to integrate expression of the major virulence gene cagA with the flagellar regulatory circuit, essential for colonization of the human host.

Two-ball structure of the flagellar hook-length control protein FliK as revealed by high-speed atomic force microscopy

The bacterial flagellar hook is a short and uniquely curved tube that connects the basal body to the filament. Hook length is controlled at 55 nm on average by a soluble protein FliK in Salmonella enterica serovar Typhimurium. The N-terminal segment of FliK responsible for measuring the hook length is considered to be intrinsically disordered. Here, we show by high-speed atomic force microscopy that a FliK molecule in solution takes on a shape of two balls linked by a flexible string; the larger ball corresponds to the N-terminal region and the smaller one corresponds to the C-terminal region. The N-terminal domain is stable but the C-terminal domain fluctuates in shape. Based on these and other features of FliK, we propose that the folding of the N-terminal segment at the tip of the growing hook plays a major role in determining the minimal length of the hook.

The flagellar soluble protein FliK determines the minimal length of the hook in Salmonella enterica serovar Typhimurium

The length of the flagellar hook is controlled by the soluble protein FliK. FliK is structurally divided into two halves with distinct functions; the N-terminal half determines hook length, while the C-terminal half switches the secretion substrate specificity, consequently terminating hook elongation. FliK properly achieves both functions only when it is secreted. In a previous paper, we showed that a temperature-sensitive flgE mutant of Salmonella enterica serovar Typhimurium, SJW2219, produced basal bodies with short hooks (average length, 25 nm) at 37°C. In this study, we show that the mutant cells grown at 37°C secrete FliK but not flagellin (FliC), indicating that FliK is abortively secreted into the medium when the hook is shorter than 30 nm. In contrast, FliK unfailingly switches the gate modes when the hook is longer than 30 nm. Taking the FliC, FliK, and FlgM secretion patterns into account, we conclude that FliK determines the minimal length of the hook. We will discuss how FliK detects the critical switching point of the secretion gate.

Role of the Dc domain of the bacterial hook protein FlgE in hook assembly and function

The bacterial flagellar hook acts as a universal joint to smoothly transmit torque produced by the motor to the filament. The hook protein FlgE assembles into a 55 nm tubular structure with the help of the hook cap (FlgD). FlgE consists of four domains, D0, Dc, D1 and D2, arranged from the inner to the outer part of the tubular structure of the hook. The Dc domain contributes to the structural stability of the hook, but it is unclear how this Dc domain is responsible for the universal joint mechanism. Here, we carried out a deletion analysis of the FlgE Dc domain. FlgEΔ4/5 with deletion of residues 30 to 49 was not secreted into the culture media. FlgEΔ5 and FlgEΔ6 with deletions of residues 40 to 49 and 50 to 59, respectively, still formed hooks, allowing the export apparatus to export the hook-filament junction proteins FlgK and FlgL and flagellin FliC. However, these deletions inhibited the replacement of the FlgD hook cap by FlgK at the hook tip, thereby abolishing filament formation. Deletion of residues 50 to 59 significantly affected hook morphology. These results suggest that the Dc domain is responsible not only for hook assembly but also for FlgE export, the interaction with FlgK, and the polymorphic supercoiling mechanism of the hook.

Inhibition of a type III secretion system by the deletion of a short loop in one of its membrane proteins

The membrane protein FlhB is a highly conserved component of the flagellar secretion system. It is composed of an N-terminal transmembrane domain and a C-terminal cytoplasmic domain (FlhBC). Here, the crystal structures of FlhBC from Salmonella typhimurium and Aquifex aeolicus are described at 2.45 and 2.55 Å resolution, respectively. These flagellar FlhBC structures are similar to those of paralogues from the needle type III secretion system, with the major difference being in a linker that connects the transmembrane and cytoplasmic domains of FlhB. It was found that deletion of a short flexible loop in a globular part of Salmonella FlhBC leads to complete inhibition of secretion by the flagellar secretion system. Molecular-dynamics calculations demonstrate that the linker region is the most flexible part of FlhBC and that the deletion of the loop reduces this flexibility. These results are in good agreement with previous studies showing the importance of the linker in the function of FlhB and provide new insight into the relationship between the different parts of the FlhBC molecule.

Protein export according to schedule: architecture, assembly, and regulation of type III secretion systems from plant- and animal-pathogenic bacteria

Flagellar and translocation-associated type III secretion (T3S) systems are present in most gram-negative plant- and animal-pathogenic bacteria and are often essential for bacterial motility or pathogenicity. The architectures of the complex membrane-spanning secretion apparatuses of both systems are similar, but they are associated with different extracellular appendages, including the flagellar hook and filament or the needle/pilus structures of translocation-associated T3S systems. The needle/pilus is connected to a bacterial translocon that is inserted into the host plasma membrane and mediates the transkingdom transport of bacterial effector proteins into eukaryotic cells. During the last 3 to 5 years, significant progress has been made in the characterization of membrane-associated core components and extracellular structures of T3S systems. Furthermore, transcriptional and posttranscriptional regulators that control T3S gene expression and substrate specificity have been described. Given the architecture of the T3S system, it is assumed that extracellular components of the secretion apparatus are secreted prior to effector proteins, suggesting that there is a hierarchy in T3S. The aim of this review is to summarize our current knowledge of T3S system components and associated control proteins from both plant- and animal-pathogenic bacteria.

Role of EscP (Orf16) in injectisome biogenesis and regulation of type III protein secretion in enteropathogenic Escherichia coli

Enteropathogenic Escherichia coli employs a type III secretion system (T3SS) to translocate virulence effector proteins directly into enterocyte host cells, leading to diarrheal disease. The T3SS is encoded within the chromosomal locus of enterocyte effacement (LEE). The function of some of the LEE-encoded proteins remains unknown. Here we investigated the role of the Orf16 protein in T3SS biogenesis and function. An orf16 deletion mutant showed translocator and effector protein secretion profiles different from those of wild-type cells. The orf16 null strain produced T3S structures with abnormally long needles and filaments that caused weak hemolysis of red blood cells. Furthermore, the number of fully assembled T3SSs was also reduced in the orf16 mutant, indicating that Orf16, though not essential, is required for efficient T3SS assembly. Analysis of protein secretion revealed that Orf16 is a T3SS-secreted substrate and regulates the secretion of the inner rod component EscI. Both pulldown and yeast two-hybrid assays showed that Orf16 interacts with the C-terminal domain of an inner membrane component of the secretion apparatus, EscU; the inner rod protein EscI; the needle protein EscF; and the multieffector chaperone CesT. These results suggest that Orf16 regulates needle length and, along with EscU, participates in a substrate specificity switch from early substrates to translocators. Taken together, our results suggest that Orf16 acts as a molecular measuring device in a way similar to that of members of the Yersinia YscP and flagellar FliK protein family. Therefore, we propose that this protein be renamed EscP.

Needle length control and the secretion substrate specificity switch are only loosely coupled in the type III secretion apparatus of Shigella

The type III secretion apparatus (T3SA), which is evolutionarily and structurally related to the bacterial flagellar hook basal body, is a key virulence factor used by many Gram-negative bacteria to inject effector proteins into host cells. A hollow extracellular needle forms the injection conduit of the T3SA. Its length is tightly controlled to match specific structures at the bacterial and host-cell surfaces but how this occurs remains incompletely understood. The needle is topped by a tip complex, which senses the host cell and inserts as a translocation pore in the host membrane when secretion is activated. The interaction of two conserved proteins, inner-membrane Spa40 and secreted Spa32, respectively, in Shigella, is proposed to regulate needle length and to flick a type III secretion substrate specificity switch from needle components/Spa32 to translocator/effector substrates. We found that, as in T3SAs from other species, substitution N257A within the conserved cytoplasmic NPTH region in Spa40 prevented its autocleavage and substrate specificity switching. Yet, the spa40_N257A mutant made only slightly longer needles with a few needle tip complexes, although it could not form translocation pores. On the other hand, Δspa32, which makes extremely long needles and also formed only few tip complexes, could still form some translocation pores, indicating that it could switch substrate specificity to some extent. Therefore, loss of needle length control and defects in secretion specificity switching are not tightly coupled in either a Δspa32 mutant or a spa40_N257A mutant.

Theoretical and computational investigation of flagellin translocation and bacterial flagellum growth

The bacterial flagellum is a self-assembling filament, which bacteria use for swimming. It is built from tens of thousands of flagellin monomers in a self-assembly process that involves translocation of the monomers through the flagellar interior, a channel, to the growing tip. Flagellum monomers are pumped into the filament at the base, move unfolded along the channel and then bind to the tip of the filament, thereby extending the growing flagellum. The flagellin translocation process, due to the flagellum maximum length of 20 μm, is an extreme example of protein transport through channels. Here, we derive a model for flagellin transport through the long confining channel, testing the key assumptions of the model through molecular dynamics simulations that also furnish system parameters needed for quantitative description. Together, mathematical model and molecular dynamics simulations explain why the growth rate of flagellar filaments decays exponentially with filament length and why flagellum growth ceases at a certain maximum length.

Functional characterization of the type III secretion substrate specificity switch protein HpaC from Xanthomonas campestris pv. vesicatoria

Pathogenicity of Xanthomonas campestris pv. vesicatoria depends on a type III secretion (T3S) system which translocates effector proteins into eukaryotic cells and is associated with an extracellular pilus and a translocon in the host plasma membrane. T3S substrate specificity is controlled by the cytoplasmic switch protein HpaC, which interacts with the C-terminal domain of the inner membrane protein HrcU (HrcU(C)). HpaC promotes the secretion of translocon and effector proteins but prevents the efficient secretion of the early T3S substrate HrpB2, which is required for pilus assembly. In this study, complementation assays with serial 10-amino-acid HpaC deletion derivatives revealed that the T3S substrate specificity switch depends on N- and C-terminal regions of HpaC, whereas amino acids 42 to 101 appear to be dispensable for the contribution of HpaC to the secretion of late substrates. However, deletions in the central region of HpaC affect the secretion of HrpB2, suggesting that the mechanisms underlying HpaC-dependent control of early and late substrates can be uncoupled. The results of interaction and expression studies with HpaC deletion derivatives showed that amino acids 112 to 212 of HpaC provide the binding site for HrcU(C) and severely reduce T3S when expressed ectopically in the wild-type strain. We identified a conserved phenylalanine residue at position 175 of HpaC that is required for both protein function and the binding of HpaC to HrcU(C). Taking these findings together, we concluded that the interaction between HpaC and HrcU(C) is essential but not sufficient for T3S substrate specificity switching.

The NMR structure of FliK, the trigger for the switch of substrate specificity in the flagellar type III secretion apparatus

The flagellar cytoplasmic protein FliK controls hook elongation by two successive events: by determining hook length and by stopping the supply of hook protein. These two distinct roles are assigned to different parts of FliK: the N-terminal half (FliK(N)) determines length and the C-terminal half (FliK(C)) switches secretion from the hook protein to the filament protein. The interaction of FliK(C) with FlhB, the switchable secretion gate, triggers the switch. By NMR spectroscopy, we demonstrated that FliK is largely unstructured and determined the structure of a compact domain in FliK(C). The compact domain, denoted the FliK(C) core domain, consists of two α-helices, a β-sheet with two parallel and two antiparallel strands, and several exposed loops. Based on the functional data obtained by a series of deletion mutants of the FliK(C) core domain, we constructed a model of the complex between the FliK(C) core domain and FlhB(C). The model suggested that one of the FliK(C) loops has a high probability of interacting with the C-terminal domain of FlhB (FlhB(C)) as the FliK molecule enters the secretion gate. We suggest that the autocleaved NPTH sequence in FlhB contacts loop 2 of FliK(C) to trigger the switching event. This contact is sterically prevented when NPTH is not cleaved. Thus, the structure of FliK provides insight into the mechanism by which this bifunctional protein triggers a switch in the export of substrates.

The type III secretion injectisome, a complex nanomachine for intracellular 'toxin' delivery

The type III secretion injectisome is a nanomachine that delivers bacterial proteins into the cytosol of eukaryotic target cells. It consists of a cylindrical basal structure spanning the two bacterial membranes and the peptidoglycan, connected to a hollow needle, eventually followed by a filament (animal pathogens) or to a long pilus (plant pathogens). Export employs a type III pathway. During assembly, all the protein subunits of external elements are sequentially exported by the basal structure itself, implying that the export apparatus can switch its substrate specificity over time. The length of the needle is controlled by a protein that it also secreted during assembly and presumably acts as a molecular ruler.

Kinetic characterization of Salmonella FliK-FlhB interactions demonstrates complexity of the Type III secretion substrate-specificity switch

The bacterial flagellum is a complex macromolecular machine consisting of more than 20 000 proteins, most of which must be exported from the cell via a dedicated Type III secretion apparatus. At a defined point in flagellar morphogenesis, hook completion is sensed and the apparatus switches substrate specificity type from rod and hook proteins to filament ones. How the switch works is a subject of intense interest. FliK and FlhB play central roles. In the present study, two optical biosensing methods were used to characterize FliK-FlhB interactions using wild-type and two variant FlhBs from mutants with severe flagellar structural defects. Binding was found to be complex with fast and slow association and dissociation components. Surprisingly, wild-type and variant FlhBs had similar kinetic profiles and apparent affinities, which ranged between 1 and 10.5 microM, suggesting that the specificity switch is more complex than presently understood. Other binding experiments provided evidence for a conformational change after binding. Liquid chromatography-mass spectrometry (LC-MS) and NMR experiments were performed to identify a cyclic intermediate product whose existence supports the mechanism of autocatalytic cleavage at FlhB residue N269. The present results show that while autocatalytic cleavage is necessary for proper substrate specificity switching, it does not result in an altered interaction with FliK, strongly suggesting the involvement of other proteins in the mechanism.

Length control of the injectisome needle requires only one molecule of Yop secretion protein P (YscP)

The needle length of the Yersinia spp. injectisome is determined by Yop secretion protein P (YscP), an early substrate of the injectisome itself. There is a linear correlation between the length of YscP and the length of the needle, suggesting that YscP acts as a molecular ruler. However, it is not known whether one single molecule of YscP suffices to control the length of one needle or whether several molecules of YscP are exported in alternation with the needle subunit YscF until the needle length matches the ruler length, which would stop needle growth. To address this question, three different strains expressing simultaneously a short and a long version of YscP were engineered. The experimentally obtained needle length distribution was compared with the distributions predicted by stochastic modeling of the various possible scenarios. The experimental data are compatible with the single ruler model and not with the scenarios involving more than one ruler per needle.

Sense and sensibility: flagellum-mediated gene regulation

The flagellum, a rotary engine required for motility in many bacteria, plays key roles in gene expression. It has been known for some time that flagellar substructures serve as checkpoints that coordinate flagellar gene expression with assembly. Less well understood, however, are other more global effects on gene expression. For instance, the flagellum acts as a 'wetness' sensor in Salmonella typhimurium, and as a mechanosensor in other bacteria. Additionally, it has been implicated in a variety of bacterial processes, including biofilm formation, pathogenesis and symbiosis. Although for many of these processes it might be simply that motility is required, in other cases it seems that the flagellum plays an underappreciated role in regulating gene expression.

Interaction of FliK with the bacterial flagellar hook is required for efficient export specificity switching

FliK-FlhB interaction switches export specificity of the bacterial flagellar protein export apparatus to stop hook protein export at an appropriate timing for hook length control. The hook structure is required for the productive FliK-FlhB interaction to flip the switch but it remains unknown how it works. Here, we characterize the role of FliK in the switching probability in the absence of the hook. When RflH/Flk was missing in the hook mutants, the switching occurred at a low probability. Overproduction of FliK significantly increased the switching probability although not at the wild-type level. An in-frame deletion of residues 129 through 159 of FliK weakened the interaction with the hook protein but not with the hook-capping protein, producing polyhooks with filaments attached. We suggest that temporary association of FliK with the inner surface of the hook during FliK secretion results in a pause in the secretion process to allow the C-terminal switch domain of FliK to be positioned and appropriately oriented near FlhB for catalysing the switch and that RflH/Flk interferes with premature switch by preventing access of cytoplasmic FliK to FlhB and even that of FliK during its secretion until hook length reaches 55 nm; only then FliK(C) passes the RflH/Flk block.

Type III secretion: a secretory pathway serving both motility and virulence (Review)

'Type III secretion' (T3S) refers to a secretion pathway that is common to the flagellae of eubacteria and the injectisomes of some gram-negative bacteria. Flagellae are rotary nanomachines allowing motility but they contain a built-in secretion apparatus that exports their own distal components to the distal end of the growing structure where they polymerize. In some cases they have been shown to export non-flagellar proteins. Injectisomes are transkingdom communication apparatuses allowing bacteria docked at the surface of a eukaryotic cell membrane to inject effector proteins across the two bacterial membranes and the eukaryotic cell membrane. Both nanomachines share a similar basal body embedded in the two bacterial membranes, topped either by a hook and a filament or by a stiff short needle. Both appear to be assembled in the same fashion. They recognize their substrate by a loose N-terminal peptide signal and the help of individual chaperones of a new type.

Mutations in flk, flgG, flhA, and flhE that affect the flagellar type III secretion specificity switch in Salmonella enterica

Upon completion of the flagellar hook-basal body (HBB) structure, the flagellar type III secretion system switches from secreting rod/hook-type to filament-type substrates. The secretion specificity switch has been reported to occur prematurely (prior to HBB completion) in flk-null mutants (P. Aldridge, J. E. Karlinsey, E. Becker, F. F. Chevance, and K. T. Hughes, Mol. Microbiol. 60:630-643, 2006) and in distal rod gene gain-of-function mutants (flgG* mutants) that produce filamentous rod structures (F. F. Chevance, N. Takahashi, J. E. Karlinsey, J. Gnerer, T. Hirano, R. Samudrala, S. Aizawa, and K. T. Hughes, Genes Dev. 21:2326-2335, 2007). A fusion of beta-lactamase (Bla) to the C terminus of the filament-type secretion substrate FlgM was used to select for mutants that would secrete FlgM-Bla into the periplasmic space and show ampicillin resistance (Ap(r)). Ap(r) resulted from null mutations in the flhE gene, C-terminal truncation mutations in the flhA gene, null and dominant mutations in the flk gene, and flgG* mutations. All mutant classes required the hook length control protein (FliK) and the rod cap protein (FlgJ) for the secretion specificity switch to occur. However, neither the hook (FlgE) nor the hook cap (FlgD) protein was required for premature FlgM-Bla secretion in the flgG* and flk mutant strains, but it was in the flhE mutants. Unexpectedly, when deletions of either flgE or flgD were introduced into flgG* mutant strains, filaments were able to grow directly on the filamentous rod structures.

Spa32 interaction with the inner-membrane Spa40 component of the type III secretion system of Shigella flexneri is required for the control of the needle length by a molecular tape measure mechanism

The effectors of enterocyte invasion by Shigella are dependent on a type III secretion system that contains a needle whose length average does not exceed 50 nm. Previously, we reported that Spa32 is required for needle length control as well as to switch substrate specificity from MxiH to Ipa proteins secretion. To identify functional domains of Spa32, 11 truncated variants were constructed and analysed for their capacity (i) to control the needle's length; (ii) to secrete the Ipa proteins; and (iii) to invade HeLa cells. Deletion at either the N-terminus or C-terminus affect Spa32 function in all cases, but Spa32 variants lacking internal residues 37-94 or 130-159 retained full Spa32 function. Similarly, a Spa32 variant obtained by inserting of the YscP's ruler domain retained Spa32 function although it programmed slightly elongated needles. Using the GST pull-down assay, we show that residues 206-246 are required for Spa32 binding to the C-terminus of Spa40, an inner membrane protein required for Ipa proteins secretion. Our data clearly demonstrate that shortening Spa32 affects the length of the needle in a comparable manner to the spa32 mutant, indicating that the control of needle length does not require a molecular ruler mechanism.

Mechanisms of type III protein export for bacterial flagellar assembly

Flagellar type III protein export is highly organized and well controlled in a timely manner by dynamic, specific and cooperative interactions among components of the export apparatus, allowing the huge and complex macromolecular assembly to be built efficiently. The bacterial flagellum, which is required for motility, consists of a rotary motor, a universal joint and a helical propeller. Most of the flagellar components are translocated to the distal, growing end of the flagellum for assembly through the central channel of the flagellum itself by the flagellar type III protein export apparatus, which is postulated to be located on the cytoplasmic side of the flagellar basal body. The export specificity switching machinery, which consists of at least two proteins that function as a molecular ruler and an export switch, respectively, monitors the state of hook-basal body assembly in the cell exterior and switches export specificity, thereby coupling sequential flagellar gene expression with the flagellar assembly process. The export ATPase complex composed of an ATPase and its regulator acts as a pilot to deliver its export substrate to the export gate and helps initial entry of the substrate N-terminal chain into a narrow pore of the export gate. The energy of ATP hydrolysis appears to be used to disassemble and release the ATPase complex from the protein about to be exported, and the rest of the successive unfolding/translocation process of the long polypeptide chain is driven solely by proton motive force (PMF), perhaps through biased one-dimensional Brownian diffusion. Interestingly, the subunits of the ATPase complex have significant sequence similarities to subunits of F(0)F(1)-ATP synthase, a rotary motor that drives the chemical reaction of ATP synthesis using PMF, and the entire crystal structure of the export ATPase is extremely similar to the alpha/beta subunits of F(0)F(1)-ATP synthase, suggesting that the flagellar export apparatus and F(0)F(1)-ATP synthase share the mechanism for their two distinct functions.

Coordinating assembly of a bacterial macromolecular machine

The assembly of large and complex organelles, such as the bacterial flagellum, poses the formidable problem of coupling temporal gene expression to specific stages of the organelle-assembly process. The discovery that levels of the bacterial flagellar regulatory protein FlgM are controlled by its secretion from the cell in response to the completion of an intermediate flagellar structure (the hook-basal body) was only the first of several discoveries of unique mechanisms that coordinate flagellar gene expression with assembly. In this Review, we discuss this mechanism, together with others that also coordinate gene regulation and flagellar assembly in Gram-negative bacteria.

Crystal structure of the C-terminal domain of a flagellar hook-capping protein from Xanthomonas campestris

The crystal structure of the C-terminal domain of a hook-capping protein FlgD from the plant pathogen Xanthomonas campestris (Xc) has been determined to a resolution of ca 2.5 A using X-ray crystallography. The monomer of whole FlgD comprises 221 amino acids with a molecular mass of 22.7 kDa, but the flexible N-terminus is cleaved for up to 75 residues during crystallization. The final structure of the C-terminal domain reveals a novel hybrid comprising a tudor-like domain interdigitated with a fibronectin type III domain. The C-terminal domain of XcFlgD forms three types of dimers in the crystal. In agreement with this, analytical ultracentrifugation and gel filtration experiments reveal that they form a stable dimer in solution. From these results, we propose that the Xc flagellar hook cap protein FlgD comprises two individual domains, a flexible N-terminal domain that cannot be detected in the current study and a stable C-terminal domain that forms a stable dimer.

Coordinating assembly of a bacterial macromolecular machine

The assembly of large and complex organelles, such as the bacterial flagellum, poses the formidable problem of coupling temporal gene expression to specific stages of the organelle-assembly process. The discovery that levels of the bacterial flagellar regulatory protein FlgM are controlled by its secretion from the cell in response to the completion of an intermediate flagellar structure (the hook-basal body) was only the first of several discoveries of unique mechanisms that coordinate flagellar gene expression with assembly. In this Review, we discuss this mechanism, together with others that also coordinate gene regulation and flagellar assembly in Gram-negative bacteria.

What's the point of the type III secretion system needle?

Recent work by several groups has significantly expanded our knowledge of the structure, regulation of assembly, and function of components of the extracellular portion of the type III secretion system (T3SS) of Gram-negative bacteria. This perspective presents a structure-informed analysis of functional data and discusses three nonmutually exclusive models of how a key aspect of T3SS biology, the sensing of host cells, may be performed.

YscU cleavage and the assembly of Yersinia type III secretion machine complexes

YscU, a component of the Yersinia type III secretion machine, promotes auto-cleavage at asparagine 263 (N263). Mutants with an alanine substitution at yscU codon 263 displayed secretion defects for some substrates (LcrV, YopB and YopD); however, transport of effector proteins into host cells (YopE, YopH, YopM) continued to occur. Two yscU mutations were isolated that, unlike N263A, completely abolished type III secretion; YscU(G127D) promoted auto-cleavage at N263, whereas YscU(G270N) did not. When fused to glutathione S-transferase (Gst), the YscU C-terminal cytoplasmic domain promoted auto-cleavage and Gst-YscU(C) also exerted a dominant-negative phenotype by blocking type III secretion. Gst-YscU(C/N263A) caused a similar blockade and Gst-YscU(C/G270N) reduced secretion. Gst-YscU(C) and Gst-YscU(C/N263A) bound YscL, the regulator of the ATPase YscN, whereas Gst-YscU(C/G270N) did not. When isolated from Yersinia, Gst-YscU(C) and Gst-YscU(C/N263A) associated with YscK-YscL-YscQ; however, Gst-YscU(C/G270N) interacted predominantly with the machine component YscO, but not with YscK-YscL-YscQ. A model is proposed whereby YscU auto-cleavage promotes interaction with YscL and recruitment of ATPase complexes that initiate type III secretion.

Characterization of the periplasmic domain of MotB and implications for its role in the stator assembly of the bacterial flagellar motor

MotA and MotB are integral membrane proteins that form the stator complex of the proton-driven bacterial flagellar motor. The stator complex functions as a proton channel and couples proton flow with torque generation. The stator must be anchored to an appropriate place on the motor, and this is believed to occur through a putative peptidoglycan-binding (PGB) motif within the C-terminal periplasmic domain of MotB. In this study, we constructed and characterized an N-terminally truncated variant of Salmonella enterica serovar Typhimurium MotB consisting of residues 78 through 309 (MotB(C)). MotB(C) significantly inhibited the motility of wild-type cells when exported into the periplasm. Some point mutations in the PGB motif enhanced the motility inhibition, while an in-frame deletion variant, MotB(C)(Delta197-210), showed a significantly reduced inhibitory effect. Wild-type MotB(C) and its point mutant variants formed a stable homodimer, while the deletion variant was monomeric. A small amount of MotB was coisolated only with the secreted form of MotB(C)-His(6) by Ni-nitrilotriacetic acid affinity chromatography, suggesting that the motility inhibition results from MotB-MotB(C) heterodimer formation in the periplasm. However, the monomeric mutant variant MotB(C)(Delta197-210) did not bind to MotB, suggesting that MotB(C) is directly involved in stator assembly. We propose that the MotB(C) dimer domain plays an important role in targeting and stable anchoring of the MotA/MotB complex to putative stator-binding sites of the motor.