Temperature-dependent RNP conformational rearrangements: analysis of binary complexes of primary binding proteins with 16 S rRNA

Proteomic Response to Rising Temperature in the Marine Cyanobacterium Synechococcus Grown in Different Nitrogen Sources

Synechococcus is one of the most important contributors to global primary productivity, and ocean warming is predicted to increase abundance and distribution of Synechococcus in the ocean. Here, we investigated molecular response of an oceanic Synechococcus strain WH8102 grown in two nitrogen sources (nitrate and urea) under present (25°C) and predicted future (28°C) temperature conditions using an isobaric tag (IBT)-based quantitative proteomic approach. Rising temperature decreased growth rate, contents of chlorophyll a, protein and sugar in the nitrate-grown cells, but only decreased protein content and significantly increased zeaxanthin content of the urea-grown cells. Expressions of CsoS2 protein involved in carboxysome formation and ribosomal subunits in both nitrate- and urea-grown cells were significantly decreased in rising temperature, whereas carbohydrate selective porin and sucrose-phosphate synthase (SPS) were remarkably up-regulated, and carbohydrate degradation associated proteins, i.e., glycogen phosphorylase kinase, fructokinase and glucose-6-phosphate dehydrogenase, were down-regulated in the urea-grown cells. Rising temperature also increased expressions of three redox-sensitive enzymes (peroxiredoxin, thioredoxin, and CP12) in both nitrate- and urea-grown cells. Our results indicated that rising temperature did not enhance cell growth of Synechococcus; on the contrary, it impaired cell functions, and this might influence cell abundance and distribution of Synechococcus in a future ocean.

A new layer of rRNA regulation by small interference RNAs and the nuclear RNAi pathway

Ribosome biogenesis drives cell growth and proliferation, but mechanisms that modulate this process remain poorly understood. For a long time, small rRNA sequences have been widely treated as non-specific degradation products and neglected as garbage sequences. Recently, we identified a new class of antisense ribosomal siRNAs (risiRNAs) that downregulate pre-rRNA through the nuclear RNAi pathway in C. elegans. risiRNAs exhibit sequence characteristics similar to 22G RNA while complement to 18S and 26S rRNA. risiRNAs elicit the translocation of the nuclear Argonaute protein NRDE-3 from the cytoplasm to nucleus and nucleolus, in which the risiRNA/NRDE complex binds to pre-rRNA and silences rRNA expression. Interestingly, when C. elegans is exposed to environmental stimuli, such as cold shock and ultraviolet illumination, risiRNAs accumulate and further turn on the nuclear RNAi-mediated gene silencing pathway. risiRNA may act in a quality control mechanism of rRNA homeostasis. When the exoribonuclease SUSI-1(ceDis3L2) is mutated, risiRNAs are dramatically increased. In this Point of View article, we will summarize our understanding of the small antisense ribosomal siRNAs in a variety of organisms, especially C. elegans, and their possible roles in the quality control mechanism of rRNA homeostasis.

Coil-like Enzymatic Biohybrid Structures Fabricated by Rational Design: Controlling Size and Enzyme Activity over Sequential Nanoparticle Bioconjugation and Filtration Steps

Well-defined enzymatic biohybrid structures (BHS) composed of avidin, biotinylated poly(propyleneimine) glycodendrimers, and biotinylated horseradish peroxidase were fabricated by a sequential polyassociation reaction to adopt directed enzyme prodrug therapy to protein-glycopolymer BHS for potential biomedical applications. To tailor and gain fundamental insight into pivotal properties such as size and molar mass of these BHS, the dependence on the fabrication sequence was probed and thoroughly investigated by several complementary methods (e.g., UV/vis, DLS, cryoTEM, AF4-LS). Subsequent purification by hollow fiber filtration allowed us to obtain highly pure and well-defined BHS. Overall, by rational design and control of preparation parameters, e.g., fabrication sequence, ligand-receptor stoichiometry, and degree of biotinylation, well-defined BHS with stable and even strongly enhanced enzymatic activities can be achieved. Open coil-like structures of BHS with few branches are available by the sequential bioconjugation approach between synthetic and biological macromolecules possessing similar size dimensions.

Quantitation of ten 30S ribosomal assembly intermediates using fluorescence triple correlation spectroscopy

The self-assembly of bacterial 30S ribosomes involves a large number of RNA folding and RNA-protein binding steps. The sequence of steps determines the overall assembly mechanism and the structure of the mechanism has ramifications for the robustness of biogenesis and resilience against kinetic traps. Thermodynamic interdependencies of protein binding inferred from omission-reconstitution experiments are thought to preclude certain assembly pathways and thus enforce ordered assembly, but this concept is at odds with kinetic data suggesting a more parallel assembly landscape. A major challenge is deconvolution of the statistical distribution of intermediates that are populated during assembly at high concentrations approaching in vivo assembly conditions. To specifically resolve the intermediates formed by binding of three ribosomal proteins to the full length 16S rRNA, we introduce Fluorescence Triple-Correlation Spectroscopy (F3CS). F3CS identifies specific ternary complexes by detecting coincident fluctuations in three-color fluorescence data. Triple correlation integrals quantify concentrations and diffusion kinetics of triply labeled species, and F3CS data can be fit alongside auto-correlation and cross-correlation data to quantify the populations of 10 specific ribosome assembly intermediates. The distribution of intermediates generated by binding three ribosomal proteins to the entire native 16S rRNA included significant populations of species that were not previously thought to be thermodynamically accessible, questioning the current interpretation of the classic omission-reconstitution experiments. F3CS is a general approach for analyzing assembly and function of macromolecular complexes, especially those too large for traditional biophysical methods.

Slow formation of stable complexes during coincubation of minimal rRNA and ribosomal protein S4

Ribosomal protein S4 binds and stabilizes a five-helix junction or five-way junction (5WJ) in the 5' domain of 16S ribosomal RNA (rRNA) and is one of two proteins responsible for nucleating 30S ribosome assembly. Upon binding, both protein S4 and 5WJ reorganize their structures. We show that labile S4 complexes rearrange into stable complexes within a few minutes at 42 °C, with longer coincubation leading to an increased population of stable complexes. In contrast, prefolding the rRNA has a smaller effect on stable S4 binding. Experiments with minimal rRNA fragments show that this structural change depends only on 16S residues within the S4 binding site. SHAPE (selective 2'-hydroxyl acylation analyzed by primer extension) chemical probing experiments showed that S4 strongly stabilizes 5WJ and the helix (H) 18 pseudoknot, which become tightly folded within the first minute of S4 binding. However, a kink in H16 that makes specific contacts with the S4 N-terminal extension, as well as a right-angle motif between H3, H4, and H18, requires a minute or more to become fully structured. Surprisingly, S4 structurally reorganizes the 530-loop and increases the flexibility of H3, which is proposed to undergo a conformational switch during 30S assembly. These elements of the S4 binding site may require other 30S proteins to reach a stable conformation.

Global stabilization of rRNA structure by ribosomal proteins S4, S17, and S20

Ribosomal proteins stabilize the folded structure of the ribosomal RNA and enable the recruitment of further proteins to the complex. Quantitative hydroxyl radical footprinting was used to measure the extent to which three different primary assembly proteins, S4, S17, and S20, stabilize the three-dimensional structure of the Escherichia coli 16S 5' domain. The stability of the complexes was perturbed by varying the concentration of MgCl(2). Each protein influences the stability of the ribosomal RNA tertiary interactions beyond its immediate binding site. S4 and S17 stabilize the entire 5' domain, while S20 has a more local effect. Multistage folding of individual helices within the 5' domain shows that each protein stabilizes a different ensemble of structural intermediates that include nonnative interactions at low Mg(2+) concentration. We propose that the combined interactions of S4, S17, and S20 with different helical junctions bias the free-energy landscape toward a few RNA conformations that are competent to add the secondary assembly protein S16 in the next step of assembly.

A complex assembly landscape for the 30S ribosomal subunit

The ribosome is a complex macromolecular machine responsible for protein synthesis in the cell. It consists of two subunits, each of which contains both RNA and protein components. Ribosome assembly is subject to intricate regulatory control and is aided by a multitude of assembly factors in vivo, but can also be carried out in vitro. The details of the assembly process remain unknown even in the face of atomic structures of the entire ribosome and after more than three decades of research. Some of the earliest research on ribosome assembly produced the Nomura assembly map of the small subunit, revealing a hierarchy of protein binding dependencies for the 20 proteins involved and suggesting the possibility of a single intermediate. Recent work using a combination of RNA footprinting and pulse-chase quantitative mass spectrometry paints a picture of small subunit assembly as a dynamic and varied landscape, with sequential and hierarchical RNA folding and protein binding events finally converging on complete subunits. Proteins generally lock tightly into place in a 5' to 3' direction along the ribosomal RNA, stabilizing transient RNA conformations, while RNA folding and the early stages of protein binding are initiated from multiple locations along the length of the RNA.

The genesis of ribosome structure: how a protein generates RNA structure in real time

Ribosomal subunit assembly is initiated by the binding of several primary binding proteins. Results from chemical modification studies show that 16S ribosomal RNA undergoes striking structural rearrangements when protein S17 is bound. For the first time, we are able to distinguish and order these structural rearrangements by using time-dependent chemical probing. Initially, protein S17 binds to a portion of helix 11, inducing a kink-turn in that helix that bends helix 7 toward the S17-helix 11 complex in a hairpin-like manner, allowing helix 7 to bind to protein S17. This structural change is rapidly stabilized by interactions at the distal and proximal ends of both RNA helices. Identifying the dynamic nature of interactions between RNA and proteins is not only essential in unraveling ribosome assembly, but also has more general application to all protein-RNA interactions.

RNA folding and ribosome assembly

Ribosome synthesis is a tightly regulated process that is crucial for cell survival. Chemical footprinting, mass spectrometry, and cryo-electron microscopy are revealing how these complex cellular machines are assembled. Rapid folding of the rRNA provides a platform for protein-induced assembly of the bacterial 30S ribosome. Multiple assembly pathways increase the flexibility of the assembly process, while accessory factors and modification enzymes chaperone the late stages of assembly and control the quality of the mature subunits.

Biophysical studies of bacterial ribosome assembly

The assembly of the bacterial ribosome involves the association of over 50 proteins to 3 large RNA molecules, and it represents a major metabolic activity for rapidly growing bacteria. The availability of atomic structures of the ribosome and the application of biochemical and biophysical methods have led to rapid progress in understanding the mechanistic details of ribosome assembly. The basic steps required to assemble a ribosome are outlined, and the contributions of mass spectrometry, computational methods, and RNA-folding studies in understanding these steps are detailed. This complex process takes place with both sequential and parallel processing that is coordinated to ensure efficient and complete assembly of ribosomes to meet the demands of cell growth.

Assembly of the 5' and 3' minor domains of 16S ribosomal RNA as monitored by tethered probing from ribosomal protein S20

The ribosomal protein (r-protein) S20 is a primary binding protein. As such, it interacts directly and independently with the 5' domain as well as the 3' minor domain of 16S ribosomal RNA (rRNA) in minimal particles and the fully assembled 30S subunit. The interactions observed between r-protein S20 and the 5' domain of 16S rRNA are quite extensive, while those between r-protein S20 and the 3' minor domain are significantly more limited. In this study, directed hydroxyl radical probing mediated by Fe(II)-derivatized S20 proteins was used to monitor the folding of 16S rRNA during r-protein association and 30S subunit assembly. An analysis of the cleavage patterns in the minimal complexes [16S rRNA and Fe(II)-S20] and the fully assembled 30S subunit containing the same Fe(II)-derivatized proteins shows intriguing similarities and differences. These results suggest that the two domains, 5' and 3' minor, are organized relative to S20 at different stages of assembly. The 5' domain acquires, in a less complex ribonucleoprotein particle than the 3' minor domain, the same architecture as observed in mature subunits. These results are similar to what would be predicted of subunit assembly by the 5'-to-3' direction assembly model.