Molecular Structure and Metal-binding Properties of the Periplasmic CopK Protein Expressed in Cupriavidus metallidurans CH34 During Copper Challenge

Interplay between Two-Component Regulatory Systems Is Involved in Control of Cupriavidus metallidurans Metal Resistance Genes

Metal resistance of Cupriavidus metallidurans is based on determinants that were acquired in the past by horizontal gene transfer during evolution. Some of these determinants encode transmembrane metal efflux systems. Expression of most of the respective genes is controlled by two-component regulatory systems composed of a membrane-bound sensor/sensory histidine kinase (HK) and a cytoplasmic, DNA-binding response regulator (RR). Here, we investigated the interplay between the three closely related two-component regulatory systems CzcRS, CzcR₂S₂, and AgrRS. All three systems regulate the response regulator CzcR, while the RRs AgrR and CzcR₂ were not involved in czc regulation. Target promoters were czcNp and czcPp for genes upstream and downstream of the central czc gene region. The two systems together repressed CzcRS-dependent upregulation of czcP-lacZ at low zinc concentrations in the presence of CzcS but activated this signal transmission at higher zinc concentrations. AgrRS and CzcR₂S₂ interacted to quench CzcRS-mediated expression of czcNp-lacZ and czcPp-lacZ. Together, cross talk between the three two-component regulatory systems enhanced the capabilities of the Czc systems by controlling expression of the additional genes czcN and czcP. IMPORTANCE Bacteria are able to acquire genes encoding resistance to metals and antibiotics by horizontal gene transfer. To bestow an evolutionary advantage on their host cell, new genes must be expressed, and their expression should be regulated so that resistance-mediating proteins are produced only when needed. Newly acquired regulators may interfere with those already present in a host cell. Such an event was studied here in the metal-resistant bacterium Cupriavidus metallidurans. The results demonstrate how regulation by the acquired genes interacts with the host's extant regulatory network. This leads to emergence of a new system level of complexity that optimizes the response of the cell to periplasmic signals.

Structural basis for copper/silver binding by theSynechocystismetallochaperone CopM

Copper homeostasis integrates multiple processes from sensing to storage and efflux out of the cell. CopM is a cyanobacterial metallochaperone, the gene for which is located upstream of a two-component system for copper resistance, but the molecular basis for copper recognition by this four-helical bundle protein is unknown. Here, crystal structures of CopM in apo, copper-bound and silver-bound forms are reported. Monovalent copper/silver ions are buried within the bundle core; divalent copper ions are found on the surface of the bundle. The monovalent copper/silver-binding site is constituted by two consecutive histidines and is conserved in a previously functionally unknown protein family. The structural analyses show two conformational states and suggest that flexibility in the first α-helix is related to the metallochaperone function. These results also reveal functional diversity from a protein family with a simple four-helical fold.

c-Type Cytochrome Assembly Is a Key Target of Copper Toxicity within the Bacterial Periplasm

In the absence of a tight control of copper entrance into cells, bacteria have evolved different systems to control copper concentration within the cytoplasm and the periplasm. Central to these systems, the Cu⁺ ATPase CopA plays a major role in copper tolerance and translocates copper from the cytoplasm to the periplasm. The fate of copper in the periplasm varies among species. Copper can be sequestered, oxidized, or released outside the cells. Here we describe the identification of CopI, a periplasmic protein present in many proteobacteria, and show its requirement for copper tolerance in Rubrivivax gelatinosus. The ΔcopI mutant is more susceptible to copper than the Cu⁺ ATPase copA mutant. CopI is induced by copper, localized in the periplasm and could bind copper. Interestingly, copper affects cytochrome c membrane complexes (cbb₃ oxidase and photosystem) in both ΔcopI and copA-null mutants, but the causes are different. In the copA mutant, heme and chlorophyll synthesis are affected, whereas in ΔcopI mutant, the decrease is a consequence of impaired cytochrome c assembly. This impact on c-type cytochromes would contribute also to the copper toxicity in the periplasm of the wild-type cells when they are exposed to high copper concentrations.

Copper is an essential cation required as a cofactor in enzymes involved in vital processes such as respiration, photosynthesis, free radical scavenging, and pathogenesis. However, copper is highly toxic and has been implicated in disorders in all organisms, including humans, because it can catalyze the production of toxic reactive oxygen species and targets various biosynthesis pathways. Identifying copper targets, provides insights into copper toxicity and homeostatic mechanisms for copper tolerance. In this work, we describe for the first time a direct effect of excess copper on cytochrome c assembly. We show that excess copper specifically affects periplasmic and membrane cytochromes c, thus suggesting that the copper toxicity targets c-type cytochrome biogenesis.

CopM is a novel copper-binding protein involved in copper resistance in Synechocystis sp. PCC 6803

Copper resistance system in the cyanobacterium Synechocystis sp. PCC 6803 comprises two operons, copMRS and copBAC, which are expressed in response to copper in the media. copBAC codes for a heavy-metal efflux–resistance nodulation and division (HME-RND) system, while copMRS codes for a protein of unknown function, CopM, and a two-component system CopRS, which controls the expression of these two operons. Here, we report that CopM is a periplasmic protein able to bind Cu(I) with high affinity (K_D ∼3 × 10⁻¹⁶). Mutants lacking copM showed a sensitive copper phenotype similar to mutants affected in copB, but lower than mutants of the two-component system CopRS, suggesting that CopBAC and CopM constitute two independent resistance mechanisms. Moreover, constitutive expression of copM is able to partially suppress the copper sensitivity of the copR mutant strain, pointing out that CopM per se is able to confer copper resistance. Furthermore, constitutive expression of copM was able to reduce total cellular copper content of the copR mutant to the levels determined in the wild-type (WT) strain. Finally, CopM was localized not only in the periplasm but also in the extracellular space, suggesting that CopM can also prevent copper accumulation probably by direct copper binding outside the cell.

Copper in Prokaryotes

The ability of copper to cycle its oxidation state, and to form high-affinity complexes with a range of biologically relevant ligands, underpins the central role that this metal plays in prokaryotic processes such as respiration, oxidative stress response, the nitrogen cycle and pigmentation. However, the very properties that nature has exploited also mean that copper is extremely toxic. To minimize this toxicity, while also ensuring sufficient supply of the metal, complex systems of trafficking evolved to facilitate transport of copper (as Cu(I)) across membranes and its targeted distribution within the cytoplasm, membrane and periplasm. The past 20 years have seen our understanding of such systems grow enormously, and atomic/molecular and mechanistic detail of many of the major cellular trafficking components is now available. This chapter begins with a discussion of the chemistry of copper that is relevant for understanding the role of this metal throughout life. The subsequent focus is then on current understanding of copper homeostasis in prokaryotes, with eukaryotic copper homeostasis dealt with in the following chapters. The chapter aims to provide a chemical perspective on these complex biological systems, emphasizing the importance of thermodynamic and kinetic properties of copper and the complexes it forms.

Molecular basis of the cooperative binding of Cu(I) and Cu(II) to the CopK protein from Cupriavidus metallidurans CH34

The bacterium Cupriavidus metallidurans CH34 is resistant to high environmental concentrations of many metal ions. Upon copper challenge, it upregulates the periplasmic protein CopK (8.3 kDa). The function of CopK in the copper resistance response is ill-defined, but CopK demonstrates an intriguing cooperativity: occupation of a high-affinity Cu(I) binding site generates a high-affinity Cu(II) binding site, and the high-affinity Cu(II) binding enhances Cu(I) binding. Native CopK and targeted variants were examined by chromatographic, spectroscopic, and X-ray crystallographic probes. Structures of two distinct forms of Cu(I)Cu(II)-CopK were defined, and structural changes associated with occupation of the Cu(II) site were demonstrated. In solution, monomeric Cu(I)Cu(II)-CopK features the previously elucidated Cu(I) site in Cu(I)-CopK, formed from four S(δ) atoms of Met28, -38, -44, and -54 (site 4S). Binding of Cu(I) to apo-CopK induces a conformational change that releases the C-terminal β-strand from the β-sandwich structure. In turn, this allows His70 and N-terminal residues to form a large loop that includes the Cu(II) binding site. In crystals, a polymeric form of Cu(I)Cu(II)-CopK displays a Cu(I) site defined by the S(δ) atoms of Met26, -38, and -54 (site 3S) and an exogenous ligand (modeled as H(2)O) and a Cu(II) site that bridges dimeric CopK molecules. The 3S Cu(I) binding mode observed in crystals was demonstrated in solution in protein variant M44L where site 4S is disabled. The intriguing copper binding chemistry of CopK provides molecular insight into Cu(I) transfer processes. The adaptable nature of the Cu(I) coordination sphere in methionine-rich clusters allows copper to be relayed between clusters during transport across membranes in molecular pumps such as CusA and Ctr1.

Structural and metal binding characterization of the C-terminal metallochaperone domain of membrane fusion protein SilB from Cupriavidus metallidurans CH34

Detoxification of heavy metal ions in Proteobacteria is tightly controlled by various systems regulating their sequestration and transport. In Cupriavidus metallidurans CH34, a model organism for heavy metal resistance studies, the sil determinant is potentially involved in the efflux of silver and copper ions. Proteins SilA, SilB, and SilC form a resistance nodulation cell division (RND)-based transport system in which SilB is the periplasmic adaptor protein belonging to the membrane fusion protein (MFP) family. In addition to the four domains typical of known MFPs, SilB has a fifth additional C-terminal domain, called SilB(440-521), which is characterized here. Structure and backbone dynamics of SilB(440-521) have been investigated using nuclear magnetic resonance, and the residues of the metal site were identified from (15)N- and (13)C-edited HSQC spectra. The solution structure and additional metal binding experiments demonstrated that this C-terminal domain folds independently of the rest of the protein and has a conformation and a Ag(+) and Cu(+) binding specificity similar to those determined for CusF from Escherichia coli. The small protein CusF plays a role in metal trafficking in the periplasm. The similarity with CusF suggests a potential metallochaperone role for SilB(440-521) that is discussed in the context of simultaneous expression of different determinants involved in copper resistance in C. metallidurans CH34.

Differential proteomic analysis using isotope-coded protein-labeling strategies: comparison, improvements and application to simulated microgravity effect on Cupriavidus metallidurans CH34

Among differential proteomic methods based on stable isotopic labeling, isotope-coded protein labeling (ICPL) is a recent non-isobaric technique devised to label primary amines found in proteins. ICPL overcomes some of the disadvantages found in other chemical-labeling techniques, such as iTRAQ or ICAT. However, previous analyses revealed that more than 30% of the proteins identified in regular ICPL generally remain unquantified. In this study, we describe a modified version of ICPL, named Post-digest ICPL, that makes it possible to label and thus to quantify all the peptides in a sample (bottom-up approach). Optimization and validation of this Post-digest ICPL approach were performed using a standard protein mixture and complex protein samples. Using this strategy, the number of proteins that were identified and quantified was greatly increased in comparison with regular ICPL and cICAT approaches. The pros and cons of this improvement are discussed. This complementary approach to traditional ICPL was applied to the analysis of modification of protein abundances in the model bacterium Cupriavidus metallidurans CH34 after cultivation under simulated microgravity. In this context, two different systems - a 2-D clinorotation and 3-D random positioning device - were used and the results were compared and discussed.

CopK from Cupriavidus metallidurans CH34 binds Cu(I) in a tetrathioether site: characterization by X-ray absorption and NMR spectroscopy

Cupriavidus metallidurans CH34 is a bacterium that is resistant to high metal concentrations in the environment. Increased copper resistance is associated with the cop cluster on the large plasmid pMOL30 that is composed of at least 21 genes. The copK gene encodes a 74 residue periplasmic protein whose expression is strongly upregulated in the presence of copper. CopK was previously shown to cooperatively bind Cu(I) and Cu(II) in distinct, specific sites. The solution structure of Cu(I)-CopK and the characterization of the Cu(I) site by X-ray absorption spectroscopy and NMR are reported here. EXAFS spectra are in agreement with a tetrathioether Cu(I) site, providing so far unique spectral information on a 4S-coordinated Cu(I) in a protein. The methionine residues forming the Cu(I) site, M28, M38, M44, and M54, are identified by NMR. We propose the chemical shift of the methionine C(epsilon) as a new and sensitive probe for the detection of Cu(I) bound to thioether groups. The solution structure of Cu(I)-CopK demonstrates that Cu(I) binding induces a complete structural modification with the disruption of the second beta-sheet and a rotation of the C-terminal part of nearly 180 degrees around a hinge formed by asparagine 57. This conformational change is directly related to the loss of the dimer interface and most probably to the formation of the Cu(II) site involving histidine 70. The solution structure of Cu(I)-CopK therefore provides the molecular basis for the understanding of the Cu(I)/Cu(II) binding cooperativity.

The challenges of determining metal-protein affinities

A key property of metallo-proteins and -enzymes is the affinity of metal ion M for protein ligand P as defined by the dissociation constant KD = [M][P]/[MP]. Its accurate determination is essential for a quantitative understanding of metal selection and speciation. However, the surfaces of proteins are defined by the sidechains of amino acids and so abound in good metal ligands (e.g., imidazole of histidine,thiol of cysteine, carboxylate of aspartic and glutamic acids, etc.). Consequently, adventitious binding of metal ions to protein surfaces is common with KD values > or = 10(-6) M. On the other hand, transport proteins responsible for 'chaperoning' essential metals to their cellular destinations appear to bind the metal ions selectively (KD < 10(-7) M, both for speciation and to minimise the toxic effects of 'free' metal ions. These ions are normally bound with still higher affinities at their ultimate destinations (the active sites of metallo-proteins and -enzymes). This review surveys possible approaches to estimation of these dissociation constants and pinpoints the various problems associated with each approach.

The complete genome sequence of Cupriavidus metallidurans strain CH34, a master survivalist in harsh and anthropogenic environments

Many bacteria in the environment have adapted to the presence of toxic heavy metals. Over the last 30 years, this heavy metal tolerance was the subject of extensive research. The bacterium Cupriavidus metallidurans strain CH34, originally isolated by us in 1976 from a metal processing factory, is considered a major model organism in this field because it withstands milli-molar range concentrations of over 20 different heavy metal ions. This tolerance is mostly achieved by rapid ion efflux but also by metal-complexation and -reduction. We present here the full genome sequence of strain CH34 and the manual annotation of all its genes. The genome of C. metallidurans CH34 is composed of two large circular chromosomes CHR1 and CHR2 of, respectively, 3,928,089 bp and 2,580,084 bp, and two megaplasmids pMOL28 and pMOL30 of, respectively, 171,459 bp and 233,720 bp in size. At least 25 loci for heavy-metal resistance (HMR) are distributed over the four replicons. Approximately 67% of the 6,717 coding sequences (CDSs) present in the CH34 genome could be assigned a putative function, and 9.1% (611 genes) appear to be unique to this strain. One out of five proteins is associated with either transport or transcription while the relay of environmental stimuli is governed by more than 600 signal transduction systems. The CH34 genome is most similar to the genomes of other Cupriavidus strains by correspondence between the respective CHR1 replicons but also displays similarity to the genomes of more distantly related species as a result of gene transfer and through the presence of large genomic islands. The presence of at least 57 IS elements and 19 transposons and the ability to take in and express foreign genes indicates a very dynamic and complex genome shaped by evolutionary forces. The genome data show that C. metallidurans CH34 is particularly well equipped to live in extreme conditions and anthropogenic environments that are rich in metals.

Unprecedented binding cooperativity between Cu(I) and Cu(II) in the copper resistance protein CopK from Cupriavidus metallidurans CH34: implications from structural studies by NMR spectroscopy and X-ray crystallography

The bacterium Cupriavidus metallidurans CH34 is resistant to high environmental concentrations of many metal ions, including copper. This ability arises primarily from the presence of a large plasmid pMOL30 which includes a cluster of 19 cop genes that respond to copper. One of the protein products CopK is induced at high levels and is expressed to the periplasm as a small soluble protein (8.3 kDa). Apo-CopK associates in solution to form a dimer (K(D) approximately 10(-5) M) whose structure was defined by NMR and X-ray crystallography. The individual molecules feature two antiparallel beta-sheets arranged in a sandwich-like structure and interact through C-terminal beta-strands. It binds Cu(II) with low affinity (K(D)(Cu(II)) > 10(-6) M) but Cu(I) with high affinity (K(D)(Cu(I)) = 2 x 10(-11) M). Cu(I)-CopK was also a dimer in the solid state and featured a distorted tetrahedral site Cu(I)(S-Met)(3)(NCS). The isothiocyanato ligand originated from the crystallization solution. Binding of Cu(I) or Ag(I), but not of Cu(II), favored the monomeric form in solution. While Ag(I)-CopK was stable as isolated, Cu(I)-CopK was moderately air-sensitive due to a strong binding cooperativity between Cu(I) and Cu(II). This was documented by determination of the Cu(I) and Cu(II) binding affinities in the presence of the other ion: K(D)(Cu(I)) = 2 x 10(-13) M and K(D)(Cu(II)) = 3 x 10(-12) M, that is, binding of Cu(II) increased the affinity for Cu(I) by a factor of approximately 10(2) and binding of Cu(I) increased the affinity for Cu(II) by a factor of at least 10(6). Stable forms of both Cu(I)Cu(II)-CopK and Ag(I)Cu(II)-CopK were isolated readily. Consistent with this unprecedented copper binding chemistry, NMR spectroscopy detected three distinct forms: apo-CopK, Cu(I)-CopK and Cu(I)Cu(II)-CopK that do not exchange on the NMR time scale. This information provides a valuable guide to the role of CopK in copper resistance.

Copper trafficking in biology: an NMR approach

Copper ions are essential for living organisms because they are involved in several fundamental biological processes. Biomolecules interacting with copper ions have to be characterized as such, when bound to the metal ion, and when they interact with other biomolecules or substrates. The characterization is both structural and dynamic. In this context, NMR is a preferred tool of investigation because it allows shedding light on what happens in solution. Here, the NMR contribution to the copper trafficking is described, providing precious information on biochemical pathways, which are essential to understand the mechanisms of life at the molecular level.

Biostructural analysis of the metal-sensor domain of CnrX from Cupriavidus metallidurans CH34

In Cupriavidus metallidurans CH34, the proteins CnrX, CnrY, and CnrH regulate the expression of the cnrCBA operon that codes for a cation-efflux pump involved in cobalt and nickel resistance. The periplasmic part of CnrX can be defined as the metal sensor in the signal transduction complex composed of the membrane-bound anti-sigma factor CnrY and the extra-cytoplasmic function sigma factor CnrH. A soluble form of CnrX was overproduced and purified. This protein behaves as a dimer in solution as judged from gel filtration, sedimentation velocity experiments, and NMR. Native crystals diffracting to 2.3 A using synchrotron radiation were obtained using the hanging-drop vapor-diffusion method. They belong to the primitive monoclinic space group P2(1), with unit cell parameters a = 31.87, b = 74.80, c = 93.67 A, beta = 90.107 degrees. NMR data and secondary structure prediction suggest that this protein is essentially formed by helices.