Amino acid insertion reveals a necessary three-helical intermediate in the folding pathway of the colicin E7 immunity protein Im7

Folding Mechanism of Proteins Im7 and Im9: Insight from All-Atom Simulations in Implicit and Explicit Solvent

Im7 and Im9 are evolutionary related proteins with almost identical native structures. In spite of their structural similarity, experiments show that Im7 folds through a long-lived on-pathway intermediate, while Im9 folds according to two-state kinetics. In this work, we use a recently developed enhanced path sampling method to generate many folding trajectories for these proteins, using realistic atomistic force fields, in both implicit and explicit solvent. Overall, our results are in good agreement with the experimental ϕ values and with the result of ϕ-value-restrained molecular dynamics (MD) simulations. However, our implicit solvent simulations fail to predict a qualitative difference in the folding pathways of Im7 and Im9. In contrast, our simulations in explicit solvent correctly reproduce the fact that only protein Im7 folds through a on-pathway intermediate. By analyzing our atomistic trajectories, we provide a physical picture which explains the observed difference in the folding kinetics of these chains.

Substrate protein folds while it is bound to the ATP-independent chaperone Spy

Chaperones assist the folding of many proteins in the cell. While the most well studied chaperones use cycles of ATP binding and hydrolysis to assist protein folding, a number of chaperones have been identified that promote protein folding in the absence of high-energy cofactors. Precisely how ATP-independent chaperones accomplish this feat is unclear. Here we have characterized the kinetic mechanism of substrate folding by the small, ATP-independent chaperone, Spy. Spy rapidly associates with its substrate, Immunity protein 7 (Im7), eliminating its potential for aggregation. Remarkably, Spy then allows Im7 to fully fold into its native state while remaining bound to the surface of the chaperone. These results establish a potentially widespread mechanism whereby ATP-independent chaperones can assist in protein refolding. They also provide compelling evidence that substrate proteins can fold while continuously bound to a chaperone.

Native contact density and nonnative hydrophobic effects in the folding of bacterial immunity proteins

The bacterial colicin-immunity proteins Im7 and Im9 fold by different mechanisms. Experimentally, at pH 7.0 and 10°C, Im7 folds in a three-state manner via an intermediate but Im9 folding is two-state-like. Accordingly, Im7 exhibits a chevron rollover, whereas the chevron arm for Im9 folding is linear. Here we address the biophysical basis of their different behaviors by using native-centric models with and without additional transferrable, sequence-dependent energies. The Im7 chevron rollover is not captured by either a pure native-centric model or a model augmented by nonnative hydrophobic interactions with a uniform strength irrespective of residue type. By contrast, a more realistic nonnative interaction scheme that accounts for the difference in hydrophobicity among residues leads simultaneously to a chevron rollover for Im7 and an essentially linear folding chevron arm for Im9. Hydrophobic residues identified by published experiments to be involved in nonnative interactions during Im7 folding are found to participate in the strongest nonnative contacts in this model. Thus our observations support the experimental perspective that the Im7 folding intermediate is largely underpinned by nonnative interactions involving large hydrophobics. Our simulation suggests further that nonnative effects in Im7 are facilitated by a lower local native contact density relative to that of Im9. In a one-dimensional diffusion picture of Im7 folding with a coordinate- and stability-dependent diffusion coefficient, a significant chevron rollover is consistent with a diffusion coefficient that depends strongly on native stability at the conformational position of the folding intermediate.

In order to fold correctly, a globular protein must avoid being trapped in wrong, i.e., nonnative conformations. Thus a biophysical account of how attractive nonnative interactions are bypassed by some amino acid sequences but not others is key to deciphering protein structure and function. We examine two closely related bacterial immunity proteins, Im7 and Im9, that are experimentally known to fold very differently: Whereas Im9 folds directly, Im7 folds through a mispacked conformational intermediate. A simple model we developed accounts for their intriguingly different folding kinetics in terms of a balance between the density of native-promoting contacts and the hydrophobicity of local amino acid sequences. This emergent principle is extensible to other biomolecular recognition processes.

Conformational dynamics is more important than helical propensity for the folding of the all α-helical protein Im7

Im7 folds via an on-pathway intermediate that contains three of the four native α-helices. The missing helix, helix III, is the shortest and its failure to be formed until late in the pathway is related to frustration in the structure. Im7H3M3, a 94-residue variant of the 87-residue Im7 in which helix III is the longest of the four native helices, also folds via an intermediate. To investigate the structural basis for this we calculated the frustration in the structure of Im7H3M3 and used NMR to investigate its dynamics. We found that the native state of Im7H3M3 is highly frustrated and in equilibrium with an intermediate state that lacks helix III, similar to Im7. Model-free analysis identified residues with chemical exchange contributions to their relaxation that aligned with the residues predicted to have highly frustrated interactions, also like Im7. Finally, we determined properties of urea-denatured Im7H3M3 and identified four clusters of interacting residues that corresponded to the α-helices of the native protein. In Im7 the cluster sizes were related to the lengths of the α-helices with cluster III being the smallest but in Im7H3M3 cluster III was also the smallest, despite this region forming the longest helix in the native state. These results suggest that the conformational properties of the urea-denatured states promote formation of a three-helix intermediate in which the residues that form helix III remain non-helical. Thus it appears that features of the native structure are formed early in folding linked to collapse of the unfolded state.

Effect of polyethylene glycols on the alkaline-induced molten globule intermediate of bovine serum albumin

In the present study, the formation of one molten globule-like unfolding intermediate of bovine serum albumin (BSA) at pH 11.2 has been established with the help of circular dichroism (CD) spectra, fluorescence spectroscopy and 'phase diagram' approach. Additionally, we have shown the conformational changes occurring in the pH 11.2 intermediate of BSA when it was exposed to different molecular weight polyethylene glycols (PEGs) at varying concentrations. When the pH 11.2 intermediate of BSA was treated by PEG 400 there was induction of secondary and non-native tertiary contacts. In case of PEG 8000 and PEG 20,000, the loss in secondary as well as tertiary structure was observed. PEG 8000 and 20,000 altered the conformation of the pH 11.2 intermediate and resulted in its transition to another intermediate state in which the hydrophobic patches were inaccessible.

Conformational properties of the unfolded state of Im7 in nondenaturing conditions

The unfolded ensemble in aqueous solution represents the starting point of protein folding. Characterisation of this species is often difficult since the native state is usually predominantly populated at equilibrium. Previous work has shown that the four-helix protein, Im7 (immunity protein 7), folds via an on-pathway intermediate. While the transition states and folding intermediate have been characterised in atomistic detail, knowledge of the unfolded ensemble under the same ambient conditions remained sparse. Here, we introduce destabilising amino acid substitutions into the sequence of Im7, such that the unfolded state becomes predominantly populated at equilibrium in the absence of denaturant. Using far- and near-UV CD, fluorescence, urea titration and heteronuclear NMR experiments, we show that three amino acid substitutions (L18A-L19A-L37A) are sufficient to prevent Im7 folding, such that the unfolded state is predominantly populated at equilibrium. Using measurement of chemical shifts, (15)N transverse relaxation rates and sedimentation coefficients, we show that the unfolded species of L18A-L19A-L37A deviates significantly from random-coil behaviour. Specifically, we demonstrate that this unfolded species is compact (R(h)=25 Å) relative to the urea-denatured state (R(h)≥30 Å) and contains local clusters of hydrophobic residues in regions that correspond to the four helices in the native state. Despite these interactions, there is no evidence for long-range stabilising tertiary interactions or persistent helical structure. The results reveal an unfolded ensemble that is conformationally restricted in regions of the polypeptide chain that ultimately form helices I, II and IV in the native state.

Nuclease colicins and their immunity proteins

It is more than 80 years since Gratia first described 'a remarkable antagonism between two strains of Escherichia coli'. Shown subsequently to be due to the action of proteins (or peptides) produced by one bacterium to kill closely related species with which it might be cohabiting, such bacteriocins have since been shown to be commonplace in the internecine warfare between bacteria. Bacteriocins have been studied primarily from the twin perspectives of how they shape microbial communities and how they penetrate bacteria to kill them. Here, we review the modes of action of a family of bacteriocins that cleave nucleic acid substrates in E. coli, known collectively as nuclease colicins, and the specific immunity (inhibitor) proteins that colicin-producing organisms make in order to avoid committing suicide. In a process akin to targeting in mitochondria, nuclease colicins engage in a variety of cellular associations in order to translocate their cytotoxic domains through the cell envelope to the cytoplasm. As well as informing on the process itself, the study of nuclease colicin import has also illuminated functional aspects of the host proteins they parasitize. We also review recent studies where nuclease colicins and their immunity proteins have been used as model systems for addressing fundamental problems in protein folding and protein-protein interactions, areas of biophysics that are intimately linked to the role of colicins in bacterial competition and to the import process itself.

Dissecting key residues in folding and stability of the bacterial immunity protein 7

The small four-helix immunity protein, Im7, has previously been shown to fold via a compact intermediate containing three of the four native helices. The short, six-residue helix III only docks onto the developing Im7 structure after the rate-limiting second transition state has been traversed. Previous work demonstrated that mutation of the helix III sequence can be used to trap the protein in the on-pathway intermediate ensemble at equilibrium. Here the role played by individual residues in the native helix III sequence in locking Im7 into a stable native structure is further examined. This work commenced with an Im7 sequence trapped in the partially folded state by substitution of the six residues in helix III with a polyglycine sequence. Biophysical analysis of variants in which individual residues from the native helix III sequence, and combinations of these residues, were introduced into this background demonstrated a critical requirement for three residues, Leu 53, Ile 54 and Tyr 55, to lock Im7 into its unique native structure. The results demonstrate a stringent constraint on the evolution of the Im7 helix III sequence rationalizing its high-sequence identity in the fold family. Thus, Leu 53 and Ile 54 provide crucial stabilizing interactions in the hydrophobic core of native Im7, while Tyr 55 is required for both stability and function. In contrast, Tyr 56 is critical for colicin binding and has no role in maintaining a stable native fold.

Desolvation and development of specific hydrophobic core packing during Im7 folding

Development of a tightly packed hydrophobic core drives the folding of water-soluble globular proteins and is a key determinant of protein stability. Despite this, there remains much to be learnt about how and when the hydrophobic core becomes desolvated and tightly packed during protein folding. We have used the bacterial immunity protein Im7 to examine the specificity of hydrophobic core packing during folding. This small, four-helix protein has previously been shown to fold via a compact three-helical intermediate state. Here, overpacking substitutions, in which residue side-chain size is increased, were used to examine the specificity and malleability of core packing in the folding intermediate and rate-limiting transition state. In parallel, polar groups were introduced into the Im7 hydrophobic core via Val→Thr or Phe→Tyr substitutions and used to determine the solvation status of core residues at different stages of folding. Over 30 Im7 variants were created allowing both series of substitutions to cover all regions of the protein structure. Φ-value analysis demonstrated that the major changes in Im7 core solvation occur prior to the population of the folding intermediate, with key regions involved in docking of the short helix III remaining solvent-exposed until after the rate-limiting transition state has been traversed. In contrast, overpacking core residues revealed that some regions of the native Im7 core are remarkably malleable to increases in side-chain volume. Overpacking residues in other regions of the Im7 core result in substantial (> 2.5 kJ mol^− 1) destabilisation of the native structure or even prevents efficient folding to the native state. This study provides new insights into Im7 folding; demonstrating that whilst desolvation occurs early during folding, adoption of a specifically packed core is achieved only at the very last step in the folding mechanism.