Development and characterisation of an agar--polyvinyl alcohol blend hydrogel

Improvement of Bacillus subtilis PI agarase production, hydrolysate scavenging capability assessment, and saccharification of algal biomass for green ethanol generation

The goal of the current work was to optimize the growth parameters needed to manufacture agarase enzyme from a non-marine PI strain of Bacillus subtilis on an agar-based medium. Using Plackett-Burman design (PBD), nine process parameters were evaluated, and agar, peptone, and yeast-extract were identified as the most significant independent factors influencing agarase production with confidence levels more than 90%. To evaluate the optimal concentrations of the indicated process parameters on agarase production, the Box-Behnken design (BBD) was applied. After optimization, B. subtilis strain PI produced 119.8 U/ml of agarase, representing a 1.36-fold increase. In addition the agar hydrolysate fermented products contain the liberated oligosaccharide acts as strong antioxidant which has 62.4% scavenging activity. Also, the agarase yields increased (1141.12, 1350.253, 1684.854 and 1921.863 U/ml) after substitution the agar with algal biomass of Carolina officinalis at different concentrations (2, 5, 10 and 15%), respectively. After completing the saccharification process, the resulted hydrolysate was used to produce ethanol through fermentation with Pichia pastoris yeast strain as an economical method giving yields (6.68317, 7.09748, 7.75648 and 8.22332 mg/ml), that are higher than using yeast extract peptone dextrose (YPD) medium (4.461 mg/ml).

Preparation and assessment of agar/TEMPO-oxidized bacterial cellulose cryogels for hemostatic applications

In this work, we have demonstrated agar and oxidized bacterial cellulose cryogels as a potential hemostatic dressing material. TEMPO-oxidized bacterial cellulose (OBC) was incorporated into the agar matrix, improving its mechanical and hemostatic properties. The oxidation of bacterial cellulose (BC) was evidenced by chemical characterization studies, confirming the presence of carboxyl groups. The in vitro blood clotting test conducted on agar/OBC composite cryogels demonstrated complete blood clotting within 90 seconds, indicating their excellent hemostatic efficacy. The cryogels exhibited superabsorbent properties with a swelling degree of 4200%, enabling them to absorb large amounts of blood. Moreover, the compressive strength of the composite cryogels was appreciably improved compared to pure agar, resulting in a more stable physical structure. The platelet adhesion test proved the significant ability of the composite cryogels to adhere to and aggregate platelets. Hemocompatibility and cytocompatibility tests have verified the safety of these cryogels for hemostatic applications. Finally, the material exhibited remarkable in vivo hemostatic performance, achieving clotting times of 64 seconds and 35 seconds when tested in the rat tail amputation model and the liver puncture model, respectively. The experiment results were compared with those of commercial hemostat, Axiostat, and Surgispon, affirming the potential of agar/OBC composite cryogel as a hemostatic dressing material.

Development of gelatin/agarose active coatings functionalized with Ocimum gratissimum L. essential oil for enhancing storability of 'Booth 7' avocado

Novel active coating from gelatin/agarose (GA) functionalized with Ocimum gratissimum L. essential oil (OGO) had been developed as a medium to evaluate their properties before being applied for avocado preservation. The resultant coating films showed enhanced mechanical, water-barrier, bactericidal, antioxidant, and UV-shielding properties by adding OGO. The best tensile strength (2.91 MPa) and flexibility (45.82 %) was found in the GA film containing 5 % (w/w) of OGO (GA-OGO-5). Furthermore, this coating formulation presented moderate antibacterial activities against Listeria, Pseudomonas, Salmonella, and Escherichia. The GA-OGO-5 coating film also divulged the highest hydrophobicity and adequate antioxidant function (30.75 μg/mL) and thus, was chosen to coat on 'Booth 7' avocados by dipping method. The GA-OGO-5 coating layers were to be efficient to decline the respiration rate of avocado during 6-day storage at 25 °C and 64 %RH. Peel color, weight loss (5.22 %), total soluble solids (8.14 %), and solution pH (6.79) at the end of storage also indicated that the GA-OGO-5 coating presented the best effectiveness for enhancing the storability of avocado as compared to uncoated and GA-treated fruit. Therefore, the GA-OGO coating has been considered as an alternative post-harvest technique to enhance the avocado storability and could be further commercialized for industry application.

Antimicrobial Activity of Artemisia dracunculus Oil-Loaded Agarose/Poly(Vinyl Alcohol) Hydrogel for Bio-Applications

In this study, the potential use of Artemisia dracunculus essential oil in bio-applications was investigated. Firstly, the phytochemicals from Artemisia dracunculus were analyzed by different methods. Secondly, the Artemisia dracunculus essential oil was incorporated into the hydrogel matrix based on poly(vinyl alcohol) (PVA) and agar (A). The structural, morphological, and physical properties of the hydrogel matrix loaded with different amounts of Artemisia dracunculus essential oil were thoroughly investigated. FTIR analysis revealed the successful loading of the essential oil Artemisia dracunculus into the PVA/A hydrogel matrix. The influence of the mechanical properties and antimicrobial activity of the PVA/A hydrogel matrix loaded with different amounts of Artemisia dracunculus was also assessed. The antimicrobial activity of Artemisia dracunculus (EO Artemisia dracunculus) essential oil was tested using the disk diffusion method and the time-kill assay method after entrapment in the PVA/A hydrogel matrices. The results showed that PVA/agar-based hydrogels loaded with EO Artemisia dracunculus exhibited significant antimicrobial activity (log reduction ratio in the range of 85.5111-100%) against nine pathogenic isolates, both Gram-positive (S. aureus, MRSA, E. faecalis, L. monocytogenes) and Gram-negative (E. coli, K. pneumoniae, S. enteritidis, S. typhimurium, and A. salmonicida). The resulted biocompatible polymers proved to have enhanced properties when functionalized with the essential oil of Artemisia dracunculus, offering opportunities and possibilities for novel applications.

Catalytic hydrolysis of agar using magnetic nanoparticles: optimization and characterization

BACKGROUND

Agar is used as a gelling agent that possesses a variety of biological properties; it consists of the polysaccharides agarose and porphyrin. In addition, the monomeric sugars generated after agar hydrolysis can be functionalized for use in biorefineries and biofuel production. The main objective of this study was to develop a sustainable agar hydrolysis process for bioethanol production using nanotechnology. Peroxidase-mimicking Fe3O4-MNPs were applied for agar degradation to generate agar hydrolysate-soluble fractions amenable to Saccharomyces cerevisiae and Escherichia coli during fermentation.

RESULTS

Fe3O4-MNP-treated (Fe3O4-MNPs, 1 g/L) agar exhibited 0.903 g/L of reducing sugar, which was 21-fold higher than that of the control (without Fe3O4-MNP-treated). Approximately 0.0181% and 0.0042% of ethanol from 1% of agar was achieved using Saccharomyces cerevisiae and Escherichia coli, respectively, after process optimization. Furthermore, different analytical techniques (FTIR, SEM, TEM, EDS, XRD, and TGA) were applied to validate the efficiency of Fe3O4-MNPs in agar degradation.

CONCLUSIONS

To the best of our knowledge, Fe3O4-MNP-treated agar degradation for bioethanol production through process optimization is a simpler, easier, and novel method for commercialization.

Swelling induced mechanically tough starch-agar based hydrogel as a control release drug vehicle for wound dressing applications

In recent years, polysaccharide-based hydrogels have received increased attention due to their inherent biodegradability, biocompatibility, and non-toxicity. The feasibility of using polysaccharides for the synthesis of hydrogels is dependent on their noteworthy mechanical strength and cell compatibility, which are required for practical applications, especially for biomedical uses. In this study, we demonstrate a facile synthetic route for the construction of a mechanically tough, biocompatible, and biodegradable hydrogel using polysaccharides such as starch and agar. A synthetic monomer-free hydrogel was synthesized using epichlorohydrin as a cross-linker, and a mechanical strength of 9.49 ± 1.29-6.16 ± 0.37 MPa was achieved. The introduction of agar into the hydrogel resulted in agar dose-dependent swelling-induced mechanical strength. Moreover, along with incredible mechanical strength, the hydrogel also exhibited prominent cell viability against human embryonic kidney cells. In addition, the hydrogel showed good encapsulation efficiency for antibacterial drugs like ciprofloxacin hydrochloride hydrate, with controlled releasing ability over a sustained period. The antibacterial activity of the encapsulated drug was observed against Staphylococcus aureus and Bacillus subtilis bacterial strains. Thus, the studied hydrogel with loaded drug exhibited all the required qualities to be utilized as a promising candidate in wound dressing applications.

Highly Efficient and Salt-Rejecting Poly(vinyl alcohol) Hydrogels with Excellent Mechanical Strength for Solar Desalination

Interfacial solar steam generation (ISSG)-based solar desalination has recently emerged as a promising solution to tackle the global issue of fresh water scarcity. However, the energy-intensive process of conventional vapor generation techniques limits its practical applications. Hydrogels with three-dimensional (3D) structures have been reported to alleviate this energy demand, but their applications in sustainable solar desalination are hindered by their poor mechanical stability. Herein, we propose a 3D poly(vinyl alcohol) (PVA)-based hydrogel with excellent mechanical strength for effective solar desalination. The dual polymer network hydrogel (PVA-agar) incorporated with multi-walled carbon nanotubes (MWCNTs) achieved a noticeable evaporation rate of 3.1 kg m^-2 h^-1 under 1 sun irradiation, owing to its broadband light absorption, intrinsic water channels, and microporous structure that help reduce the latent heat of vaporization. More importantly, the application of kosmotropic ammonium sulfate ions was found to greatly improve the mechanical strength of the hydrogels using a facile Hofmeister-assisted soaking method. Finally, the PVA-agar-MWCNT hydrogel was able to desalinate seawater efficiently (2.5 kg m^-2 h^-1) with self-cleaning capability of salt crystals. The salinity level of the desalinated water was also comparable to drinking clean water. The present results would pave the way for fabricating mechanically strong, hydrophilic, and highly efficient hydrogels for effective and sustainable solar desalination.

Hypercrosslinked Polymer Gels as a Synthetic Hybridization Platform for Designing Versatile Molecular Separators

Hypercrosslinked polymers (HCPs), amorphous microporous three-dimensional networks based on covalent linkage of organic building blocks, are a promising class of materials due to their high surface area and easy functionalization; however, this type of material lacks processability due to its network rigidity based on covalent crosslinking. Indeed, the development of strategies to improve its solution processability for broader applications remains challenging. Although HCPs have similar three-dimensionally crosslinked networks to polymer gels, HCPs usually do not form gels but insoluble powders. Herein, we report the synthesis of HCP gels from a thermally induced polymerization of a tetrahedral monomer, which undergoes consecutive solubilization, covalent bond formation, colloidal formation, followed by their aggregation and percolation to yield a hierarchically porous network. The resulting gels feature concentration-dependent hierarchical porosities and mechanical stiffness. Furthermore, these HCP gels can be used as a platform to achieve molecular-level hybridization with a two-dimensional polymer during the HCP gel formation. This method provides functional gels and corresponding aerogels with the enhancement of porosities and mechanical stiffness. Used in column- and membrane-based molecular separation systems, the hybrid gels exhibited a separation of water contaminants with the efficiency of 97.9 and 98.6% for methylene blue and KMnO₄, respectively. This result demonstrated the potentials of the HCP gels and their hybrid derivatives in separation systems requiring macroscopic scaffolds with hierarchical porosity.

Porous boron nitride nanofibers as effective nanofillers for poly(vinyl alcohol) composite hydrogels with excellent self-healing performances

New composite hydrogels with excellent self-healing properties were prepared by combining poly(vinyl alcohol) (PVA) and boron nitride nanofibers (BNNFs) via a facile one-pot assembly method. One-dimensional porous BNNFs with high aspect ratio, abundant hydroxyl functional groups, especially excellent flexibility which has been first demonstrated in experiments, can act as a decent inorganic nanofillers to effectively improve the mechanical and self-healing properties of PVA hydrogels. Both the tensile and compression performances of hydrogels have been greatly improved by the trace addition of BNNFs (only ∼1.25 wt%). Compared with other BN nanofillers with spherical particles and lamellar morphologies, BNNFs with high aspect ratios and good flexibility play a unique role in the preparation of PVA composite hydrogels with cross-linked three-dimensional polymeric networks. This can be explained by the different topological structures of composite hydrogels formed. The abundant hydroxyl functional groups can form a lot of reversible hydrogen bonds with the molecular chains of PVA, so the as-prepared hydrogels have a high self-healing efficiency. The best healing efficiency of the composite hydrogels with 2.25 wt% BNNFs reaches as high as 97.31% after self-healing for 30 minutes. The good flexibility of BNNFs is beneficial to the movement of the PVA chain, which is beneficial to the self-healing process of composite hydrogels. The outstanding self-healing performance is very important for the application of composite hydrogels in the biomedical field and wearable flexible devices.

Mathematical modeling of cinnamon (Cinnamomum verum) bark oil release from agar/PVA biocomposite film for antimicrobial food packaging: The effects of temperature and relative humidity

Antimicrobial biocomposite films were prepared using agar (AG) and polyvinyl alcohol (PVA) as polymer matrix materials and cinnamon bark oil (CBO) as antimicrobial agent. AG and PVA were blended with different mixing ratios. The addition of AG improved the overall water resistance properties of the composite films. To evaluate the effects of temperature and relative humidity (RH) on the release kinetics of CBO from films, CBO release kinetics were analyzed under the 9 combinations of temperature and RH. Then, mathematical modeling of obtained data was conducted using Peleg, Ritger-Peppas, and Peppas-Sahlin models to investigate the release mechanisms of CBO. Consequently, the CBO release rate proportionally increased with the temperature and RH, with the RH being the main factor affecting the release behavior of CBO. In vitro antimicrobial activity tests against gram-positive and gram-negative bacteria showed that the developed composite films have high applicability as an antimicrobial food packaging material.

Agarose-Based Gel-Phase Microextraction Technique for Quick Sampling of Polar Analytes Adsorbed on Surfaces

Sampling and extraction of chemical residues present on flat or curved surfaces as well as touch-sensitive objects are challenging. Hydrogels are characterized by high mechanical flexibility and water content. Thus, they are an ideal medium for transferring water-soluble analytes from a sampled surface to the next stage of an analytical workflow. Here, we demonstrate gel-phase microextraction (GPME), in which disks of blended hydrogels are utilized to lift traces of water-soluble substances adsorbed on surfaces. The protocol has been optimized in a series of tests involving fluorometric and mass spectrometric measurements. Compared with the pure agarose hydrogel, most of the tested blended hydrogels provide a higher efficiency for the sampling/extraction of a model analyte, fluorescein. The blended hydrogel disks are incorporated into three-dimensional (3D)-printed acrylonitrile-butadiene-styrene chips to create easy-to-use sampling probes. We exemplify the suitability of this improved GPME approach in sampling chemical residues present on the skin, glass, and daily use objects. In these tests, the extracts were analyzed on a triple quadrupole mass spectrometer fitted with an electrospray ion source operated in the positive- and negative-ion modes. The method enabled the detection of diclofenac on excised porcine skin fragments exposed to a topical nonsteroidal anti-inflammatory drug and sweat residues (lactic acid) left on surfaces touched by humans. The limits of detection for diclofenac and lactic acid in hydrogel extract were 6.4 × 10-6 and 2.1 × 10-5 M, respectively. In a model experiment, conducted using the presented approach, the amount of lactic acid on a glass slide with fingerprints was estimated to be ∼1.4 × 10-7 mol cm-2.

Response surface methodology directed synthesis of luminescent nanocomposite hydrogel for trapping anionic dyes

The present research work reveals semi-interpenetrating network (semi-IPN) synthesis using response surface methodology-central composite design (RSM-CCD) based optimization. The maximum swelling of 362.11% was obtained with monomer, crosslinker and initiator concentrations 4.39 mol L^-1, 1.52 mol L^-1 and 4.58 mol L^-1, respectively, temperature 70 °C, time 3 h and pH 4.0. The synthesized hydrogel showed 94.16% and 95.62% removal for eosin yellow (EY) and eriochrome black-T (EBT) dyes, respectively. The incorporation of cadmium sulphide nanodots into the hydrogel network enhanced the % dye removal (96.82% EY and 98.73% EBT) along with fluorescent behavior. Various conditions optimized for EY and EBT dye removal with respect to semi-IPN were: 0.4 g adsorbent dose each, dye concentrations 10 mg L^-1 and 120 mg L^-1, contact time 24 h each, respectively. Adsorption studies followed langmuir theory for both dyes. Second order and first order kinetics along with intraparticle diffusion of dye molecules were favorable to EY and EBT, respectively. Thermodynamic study reveals exothermic nature of adsorption. Recyclability of the adsorbent is superior as tested by desorption-adsorption tests.

Facile and cost-effective synthesis of glycogen-based conductive hydrogels with extremely flexible, excellent self-healing and tunable mechanical properties

In materials science and engineering, the designing of hydrogels with excellent self-healing and tunable mechanical properties is an inviting issue. In this study, we introduce the sacrificial bonds interactions in a hybrid hydrogel of natural and synthetic polymers, to give a hydrogel with autonomous self-healing ability and tunable mechanical properties. Glycogen, a natural polymer tends to strengthen the hydrogel while PVA, a synthetic polymer plays a critical role in the flexibility and stretchability of the hydrogel. Hydrogels were designed by the sacrificial non-covalent interactions with physical cross-linking of the polymer chains to the trivalent metal ions. Functional groups of the polymers interact with sacrificial hydrogen bonds with and with the metal ions, they interact through sacrificial coordination interactions with different strength, results tunable sacrificial bonds. Weaker sacrificial bonds rupture prior to the strong sacrificial bonds upon external loading, which dissipate the energy and endow the hydrogel with adjustable mechanical and self-healing properties. The tunable mechanical properties and excellent self-healing efficiency enlarge the application areas of the developed hydrogel in various fields.

Synthesis, characterization, and anti-microbial activity of superabsorbents based on agar–poly(methacrylic acid-glycine)

In this study, poly(methacrylic acid-glycine)-grafted agar-based hydrogels with optimized process parameters were synthesized via a two-step green-radiation induced grafting process using microwave heating. Poly(methacrylic acid) chains were graft copolymerized onto an agar backbone using ammonium persulfate as a free radical initiator and N,N′-methylene-bis-acrylamide as a cross-linking means using microwave heating. The influence of different reaction parameters was investigated on the percentage swelling behavior of the cross-linked hydrogel networks. The prepared hydrogel networks with optimum percentage swelling were characterized by Fourier transform infrared spectroscopy, time-of-flight secondary ion mass spectrometry, scanning electron microscopy, X-ray diffraction, and thermogravimetric analysis, using agar as a reference. The anti-bacterial activities of the prepared hydrogels against Gram-positive Staphylococcus aureus bacteria and Gram-negative Escherichia coli bacteria were investigated. Staphylococcus aureus was found to be more susceptible to the compounds compared to Escherichia coli. These results indicate that the prepared hydrogels have the potential to be applied as anti-bacterial agents.

Preparation and characterization of a novel pH-sensitive Salecan-g-poly(acrylic acid) hydrogel for controlled release of doxorubicin

Salecan is a novel water-soluble extracellular β-glucan produced by a salt-tolerant strain Agrobacterium sp. ZX09. Salecan is suitable for the fabrication of hydrogels for biomedical applications due to its excellent physicochemical and biological properties. In this paper, a series of pH-sensitive hydrogels were prepared in aqueous solution by the graft copolymerization of Salecan and acrylic acid (AA) using N,N'-methylene diacrylamide as a crosslinker for controlled drug delivery. The structure and thermal stability of the resulting hydrogels were characterized by FT-IR, XRD and TGA. By SEM analysis, freeze-dried hydrogels displayed an interconnected porous structure with tunable pore size in the range of 23.2-90.3 μm. The swelling behavior of the hydrogels was shown to be highly dependent on the environmental pH, salt type and concentration, as well as the contents of Salecan and BAAm. They are almost unswellable at pH 1.2 and swollen extensively at pH 6.86. Meanwhile, the increase in the content of hydrophilic Salecan could enhance the swelling ratio, whereas the presence of more BAAm reduced the swelling capacity but promoted the water retention to some extent. Rheological tests revealed that storage modulus G' was strongly influenced by the crosslink density of the obtained hydrogel network. Especially, doxorubicin (DOX) as a model anti-cancer drug was very efficiently loaded into the negatively charged hydrogels (up to 69.4 wt%) through electrostatic interactions. More importantly, the release of DOX from this intelligent system exhibited pH-responsive behavior and a sustained release pattern. For SPA2, the cumulative release profile showed a low level of drug release (about 12.3 wt% in 24 h) at pH 7.4, and was significantly accelerated at pH 4.0 (over 40 wt% in 6 h). Cytotoxicity experiments confirmed that all blank hydrogels were non-toxic to A549 cells, while DOX released from the drug-loaded hydrogels remained biologically active and had the capability to kill cancer cells. The preliminary results clearly suggested that the Salecan-g-PAA hydrogels may be promising carriers for controlled drug delivery.

New Formulations of Polysaccharide-Based Hydrogels for Drug Release and Tissue Engineering

Polysaccharide-based hydrogels are very promising materials for a wide range of medical applications, ranging from tissue engineering to controlled drug delivery for local therapy. The most interesting property of this class of materials is the ability to be injected without any alteration of their chemical, mechanical and biological properties, by taking advantage of their thixotropic behavior. It is possible to modulate the rheological and chemical-physical properties of polysaccharide hydrogels by varying the cross-linking agents and exploiting their thixotropic behavior. We present here an overview of our synthetic strategies and applications of innovative polysaccharide-based hydrogels: hyaluronan-based hydrogel and new derivatives of carboxymethylcellulose have been used as matrices in the field of tissue engineering; while guar gum-based hydrogel and hybrid magnetic hydrogels, have been used as promising systems for targeted controlled drug release. Moreover, a new class of materials, interpenetrating hydrogels (IPH), have been obtained by mixing various native thixotropic hydrogels.

Development and characterization of novel agar and gelatin injectable hydrogel as filler for peripheral nerve guidance channels

Injectable hydrogels are becoming of increasing interest in the field of tissue engineering thanks to their versatile properties and to the possibility of being injected into tissues or devices during surgery. In peripheral nerve tissue engineering, injectable hydrogels having shear-thinning properties are advantageous as filler of nerve guidance channels (NGCs) to improve the regeneration process. In the present work, gelatin-based hydrogels were developed and specifically designed for the insertion into the lumen of hollow NGCs through a syringe during surgery. Injectable hydrogels were obtained using an agar-gelatin 20:80 weight ratio, (wt/wt) blend crosslinked by the addition of genipin (A/GL_GP). The physicochemical properties of the A/GL_GP hydrogels were analysed, including their injectability, rheological, swelling and dissolution behaviour, and their mechanical properties under compression. The hydrogel developed showed shear-thinning properties and was applied as filler of NGCs. The A/GL_GP hydrogel was tested in vitro using different cell lines, among them Schwann cells which have been used because they have an important role in peripheral nerve regeneration. Viability assays demonstrated the lack of cytotoxicity. In vitro experiments showed that the hydrogel is able to promote cell adhesion and proliferation. Two- and three-dimensional migration assays confirmed the capability of the cells to migrate both on the surface and within the internal framework of the hydrogel. These data show that A/GL_GP hydrogel has characteristics that make it a promising scaffold material for tissue engineering and nerve regeneration. Copyright © 2014 John Wiley & Sons, Ltd.

High-affinity water-soluble system for efficient naringinase immobilization in polyvinyl alcohol-dimethyl sulfoxide lens-shaped particles

Polyvinyl alcohol (PVA) is a water-soluble, biocompatible and biodegradable synthetic polymer whose application in the immobilization of biological agents for use in biocatalysis has shown promising results. This study aimed to investigate and optimize the immobilization of naringinase from Penicillium decumbens in PVA networks, targeting for the hydrolysis of naringin. Variables such as the most suitable cross-linker, catalyst, inorganic salt, co-solvents and solidification process were identified as key issues for PVA-based methods to form lens-shaped particles, while retaining high enzyme activity and stability. Major improvements were established for better and more reproducible immobilization conditions, namely, by designing a new immobilization apparatus to produce uniform lens-shaped particles. The common problems of PVA-based entrapment were significantly mitigated, through the use of selected cross-linker, glutaraldehyde (GA), and co-solvent, dimethyl sulfoxide (DMSO), which decreased the toxicity of the immobilization process and allowed the control of membrane porosity, respectively. The relevance of DMSO and GA and their interaction and effect on the swelling ratio, encapsulation efficiency and residual activity of PVA biocatalysts were established. The immobilization of naringinase in PVA under a DMSO concentration of 60%, cross-linked with 1% GA, and particle lens size of 3.5-4.0 mm, width of 100-300 µm and average particle volume of 12.5 ± 0.92 µL, allowed an encapsulation efficiency of 98.6% and an average residual activity of 87% ± 3.6%. The kinetic characterization of the immobilized naringinase showed no changes in pH profile, whereas hydrolytic activity increased up to 60 °C. Immobilization in PVA/DMSO/GA lens-shaped particles enhanced the storage stability of naringinase. Moreover, these naringinase bio-immobilizates retained a conversion rate higher than 78% after 23 runs.

Mullins effect behaviour under compression in micelle-templated silica and micelle-templated silica/agarose systems

The mechanical properties of bioceramic conformed pieces based on micelle-templated silica (MTS) such as SBA15, MCM41 and MCM48 as well as MTS/agarose systems have been evaluated under static and cyclic compressive tests. The MTS pieces exhibited a brittle behaviour. Agarose, a biocompatible and biodegradable hydrogel, has been used to shape ceramic-agarose pieces following a low temperature shaping method. Agarose conferred toughness, ductility and a rubbery consistency up to a 60% strain in ceramic MTS/agarose systems leading to a maximum strength of 10-50 MPa, without losing their initial cylindrical structure. This combination of ceramic and organic matrix contributes to avoiding the inherent brittleness of the bioceramic and enhances the compression resistance of hydrogel. The presence of mechanical hysteresis, permanent deformation after the first cycle and recovery of the master monotonous curve of MTS/agarose systems indicate a Mullins-like effect similar to that found in carbon-filled rubber systems. We report this type of mechanical behaviour, the Mullins effect, for the first time in MTS bioceramics and MTS bioceramic/agarose systems.

Physicochemical properties of biodegradable polyvinyl alcohol-agar films from the red algae Hydropuntia cornea

Agar obtained from the red alga Hydropuntia cornea was blended with polyvinyl alcohol (PVOH) in order to produce biodegradable films. In this study, we compare the properties of biopolymeric films formulated with agars extracted from H. cornea collected at different seasons (rainy and dry) in the Gulf of Mexico coast and PVOH as synthetic matrix. The films were prepared at different agar contents (0%, 25%, 50%, 75%, and 100%) and their optical, mechanical, thermal, and morphological properties analyzed. The tensile strength of PVOH-agar films increased when agar content was augmented. The formulation with 50% agar from rainy season (RS) had a significant higher tensile strength when compared to those from dry season (DS; p < 0.05). Tensile modulus also displayed an increasing trend and likewise, for 50% and 75% agar blends from RS showed higher values than those from DS (p < 0.05). In contrast, elongation at break decreased as the agar content increased, independently of the season. Environmental scanning electron microscopy images of PVOH-agar 75% biofilms from RS showed a homogeneous structure with good interfacial adhesion between the two components. The changes evidenced in the FTIR spectrum of this blend suggest that hydrogen bonding is taking place between the agar ether linkages (C-O-C) and the hydroxyl groups (OH) of the PVOH. Based on the above mentioned results, blends of PVOH and 75% agar from H. cornea collected in rainy season showed good properties for applications in the biodegradable packaging industry.