The consolidation behavior of silk hydrogels

Compressive Mechanical Behavior of Partially Oxidized Polyvinyl Alcohol Hydrogels for Cartilage Tissue Repair

Polyvinyl alcohol (PVA) hydrogels are extensively used as scaffolds for tissue engineering, although their biodegradation properties have not been optimized yet. To overcome this limitation, partially oxidized PVA has been developed by means of different oxidizing agents, obtaining scaffolds with improved biodegradability. The oxidation reaction also allows tuning the mechanical properties, which are essential for effective use in vivo. In this work, the compressive mechanical behavior of native and partially oxidized PVA hydrogels is investigated, to evaluate the effect of different oxidizing agents, i.e., potassium permanganate, bromine, and iodine. For this purpose, PVA hydrogels are tested by means of indentation tests, also considering the time-dependent mechanical response. Indentation results show that the oxidation reduces the compressive stiffness from about 2.3 N/mm for native PVA to 1.1 ÷ 1.4 N/mm for oxidized PVA. During the consolidation, PVA hydrogels exhibit a force reduction of about 40% and this behavior is unaffected by the oxidizing treatment. A poroviscoelastic constitutive model is developed to describe the time-dependent mechanical response, accounting for the viscoelastic polymer matrix properties and the flow of water molecules within the matrix during long-term compression. This model allows to estimate the long-term Young's modulus of PVA hydrogels in drained conditions (66 kPa for native PVA and 34-42 kPa for oxidized PVA) and can be exploited to evaluate their performances under compressive stress in vivo, as in the case of cartilage tissue engineering.

In vitro modelling of the physiological and diseased female reproductive system

The maladies affecting the female reproductive tract (FRT) range from infections to endometriosis to carcinomas. In vitro models of the FRT play an increasingly important role in both basic and translational research, since the anatomy and physiology of the FRT of humans and other primates differ significantly from most of the commonly used animal models, including rodents. Using organoid culture to study the FRT has overcome the longstanding hurdle of maintaining epithelial phenotype in culture.  Both ECM-derived and engineered materials have proved critical for maintaining a physiological phenotype of FRT cells in vitro by providing the requisite 3D environment, ligands, and architecture. Advanced materials have also enabled the systematic study of factors contributing to the invasive metastatic processes. Meanwhile, microphysiological devices make it possible to incorporate physical signals such as flow and cyclic exposure to hormones. Going forward, advanced materials compatible with hormones and optimised to support FRT-derived cells' long-term growth, will play a key role in addressing the diverse array of FRT pathologies and lead to impactful new treatments that support the improvement of women's health. STATEMENT OF SIGNIFICANCE: The female reproductive system is a crucial component of the female anatomy. In addition to enabling reproduction, it has wide ranging influence on tissues throughout the body via endocrine signalling. This intrinsic role in regulating normal female biology makes it susceptible to a variety of female-specific diseases. However, the complexity and human-specific features of the reproductive system make it challenging to study. This has spurred the development of human-relevant in vitro models for helping to decipher the complex issues that can affect the reproductive system, including endometriosis, infection, and cancer. In this Review, we cover the current state of in vitro models for studying the female reproductive system, and the key role biomaterials play in enabling their development.

Thermo-responsive chitosan/silk fibroin/amino-functionalized mesoporous silica hydrogels with strong and elastic characteristics for bone tissue engineering

Amino-functionalized mesoporous silica nanoparticles with radially porous architecture were optimally synthesized, and they were used together with silk fibroin and chitosan to produce a type of covalently crosslinked composite hydrogel using genipin as a crosslinker. The optimally achieved composite gels were found to be thermo-responsive at physiological temperature and pH with well-defined injectability. They were also detected to have mechanically strong and elastic characteristics. In addition, these gels showed the ability to release bioactive Si ions suited to an effective dose range in approximately linear manners for a few weeks. Studies on the cell-gel constructs revealed that the composite gels well supported the growth of seeded MC3T3-E1 cells, and the deposition of matrix components. Results obtained from the detection of alkaline phosphatase activity and the matrix mineralization in the cell-gel constructs confirmed that these composite gels had certain osteogenic capacity. The obtained results suggest that these composite gels have promising potential in bone repair and regeneration.

Systematic Review of Silk Scaffolds in Musculoskeletal Tissue Engineering Applications in the Recent Decade

During the past decade, various novel tissue engineering (TE) strategies have been developed to maintain, repair, and restore the biomechanical functions of the musculoskeletal system. Silk fibroins are natural polymers with numerous advantageous properties such as good biocompatibility, high mechanical strength, and low degradation rate and are increasingly being recognized as a scaffolding material of choice in musculoskeletal TE applications. This current systematic review examines and summarizes the latest research on silk scaffolds in musculoskeletal TE applications within the past decade. Scientific databases searched include PubMed, Web of Science, Medline, Cochrane library, and Embase. The following keywords and search terms were used: musculoskeletal, tendon, ligament, intervertebral disc, muscle, cartilage, bone, silk, and tissue engineering. Our Review was limited to articles on musculoskeletal TE, which were published in English from 2010 to September 2019. The eligibility of the articles was assessed by two reviewers according to prespecified inclusion and exclusion criteria, after which an independent reviewer performed data extraction and a second independent reviewer validated the data obtained. A total of 1120 articles were reviewed from the databases. According to inclusion and exclusion criteria, 480 articles were considered as relevant for the purpose of this systematic review. Tissue engineering is an effective modality for repairing or replacing injured or damaged tissues and organs with artificial materials. This Review is intended to reveal the research status of silk-based scaffolds in the musculoskeletal system within the recent decade. In addition, a comprehensive translational research route for silk biomaterial from bench to bedside is described in this Review.

Enhanced dual network hydrogels consisting of thiolated chitosan and silk fibroin for cartilage tissue engineering

Thiolated chitosan (CS-NAC) was synthesized and the selected CS-NAC was used together with silk fibroin (SF) to produce dual network CS-NAC/SF hydrogels. The CS-NAC/SF solutions with formulated compositions were able to form hydrogels at physiological temperature and pH. Rheological measurements showed that elastic modulus of some CS-NAC/SF gels could reach around 3 kPa or higher and was much higher than their respective viscous modulus, indicating that they behaved like strong gels. Deformation measurements verified that CS-NAC/SF gels had well-defined elasticity. The optimized CS-NAC/SF gels exhibited jointly enhanced properties in terms of strength, stiffness and elasticity when compared to the gels resulted from either CS-NAC or SF. Examinations of dry CS-NAC/SF gels revealed that they were highly porous with well-interconnected pore features. Cell culture demonstrated that CS-NAC/SF gels supported the growth of chondrocytes while effectively maintaining their phenotype. Results suggest that these dual network gels have promising potential in cartilage repair.

Mechanical behaviour of alginate film with embedded voids under compression-decompression cycles

Voids of 300 µm diameter were embedded uniformly as monolayer in alginate gel film using a fluidic device. Voids of these dimensions in biopolymer gel film are desired for better transport of bioactive species and cell colonization in engineered tissues. In this article, the role of embedded voids in reducing compressive stress, hysteresis, and time scale of reheal vis-a-vis expulsion of pore fluid and its reabsorption upon reversal of load are reviewed. The cyclic loading was conducted with varying amplitude and frequency. The irreversible changes, if any in the gel structure under extreme compression were analyzed. The rate of expulsion of aqueous phase directly relates to the permeability of the gel film that is estimated here using simplified momentum and volumetric balance equations. The decrease in permeability with deformation is analyzed further, and the contribution of voids in this regard is discussed.

In vivo degradation and neovascularization of silk fibroin implants monitored by multiple modes ultrasound for surgical applications

Background

In this paper we aimed to investigate the neovascularization and biodegradation of the silk fibroin in vivo using multiple modes ultrasound, including two-dimensional, three-dimensional and contrast-enhanced ultrasound by quantifying the echo intensity, volume and contrast enhancement of the silk fibroin implants.

Method

A total of 56 male Wistar rats were randomly divided into two groups and 4%(w/v) silk hydrogels were injected subcutaneously at hind limb or upper back of the rats respectively to compare the biodegradation rate in different sites of the body. The implants were observed at day 0, 4, 8, 12, 16, 18, 20 with multiple modes ultrasound.

Results

The echo intensity of silk fibroin implants increased and the volume decreased gradually, and complete degradation was confirmed 18 and 20 days after subcutaneous implantation at the upper back and at the hind limb respectively. This demonstrated that the silk fibroin embedded in the upper back degraded slightly faster than that in the hind limb. Additionally, the neovascularization revealed by the contrast enhancement values of CEUS showed that there was a relatively low enhancement (< 5 dB) during day 4 to day 16, followed by moderate enhancement at day 18 (5–20 dB), and a significant enhancement at day 20 (> 40 dB).

Conclusion

This study suggests that multiple modes ultrasound imaging could be an ideal method to evaluate the degradation and neovascularization of biomaterial implants in vivo for surgical applications.

Fabrication and Mechanical Characterization of Hydrogel Infused Network Silk Scaffolds

Development and characterization of porous scaffolds for tissue engineering and regenerative medicine is of great importance. In recent times, silk scaffolds were developed and successfully tested in tissue engineering and drug release applications. We developed a novel composite scaffold by mechanical infusion of silk hydrogel matrix into a highly porous network silk scaffold. The mechanical behaviour of these scaffolds was thoroughly examined for their possible use in load bearing applications. Firstly, unconfined compression experiments show that the denser composite scaffolds displayed significant enhancement in the elastic modulus as compared to either of the components. This effect was examined and further explained with the help of foam mechanics principles. Secondly, results from confined compression experiments that resemble loading of cartilage in confinement, showed nonlinear material responses for all scaffolds. Finally, the confined creep experiments were performed to calculate the hydraulic permeability of the scaffolds using soil mechanics principles. Our results show that composite scaffolds with some modifications can be a potential candidate for use of cartilage like applications. We hope such approaches help in developing novel scaffolds for tissue engineering by providing an understanding of the mechanics and can further be used to develop graded scaffolds by targeted infusion in specific regions.

Characteristics of platelet gels combined with silk

Platelet gel, a fibrin network containing activated platelets, is widely used in regenerative medicine due the capacity of platelet-derived growth factors to accelerate and direct healing processes. However, limitations to this approach include poor mechanical properties, relatively rapid degradation, and the lack of control of release of growth factors at the site of injection. These issues compromise the ability of platelet gels for sustained function in regenerative medicine. In the present study, a combination of platelet gels with silk fibroin gel was studied to address the above limitations. Mixing sonicated silk gels with platelet gels extended the release of growth factors without inhibiting gel-forming ability. The released growth factors were biologically active and their delivery was modified further by manipulation of the charge of the silk protein. Moreover, the silk gel augmented both the rheological properties and compressive stiffness of the platelet gel, tuned by the silk concentration and/or silk/platelet gel ratio. Silk-platelet gel injections in nude rats supported enhanced cell infiltration and blood vessel formation representing a step towards new platelet gel formulations with enhanced therapeutic impact.

Evaluation of stretched electrospun silk fibroin matrices seeded with urothelial cells for urethra reconstruction

BACKGROUND

We investigated the feasibility of urethral reconstruction using stretched electrospun silk fibroin matrices.

MATERIALS AND METHODS

A novel electrospun silk fibroin matrix was prepared. The structure of the material was assessed by scanning electron microscopy and a porosity test. Canine urothelial cells were isolated, expanded, and seeded onto the material for 1 wk to obtain a tissue-engineered graft. The tissue-engineered graft was assessed using hematoxylin and eosin staining and scanning electron microscopy. A dorsal urethral mucosal defect was created in nine female beagle dogs. In the experimental group, tissue-engineered mucosa was used to repair urethra mucosa defects in six dogs. No substitute was used in the three dogs of the control group. Retrograde urethrography was performed at 1, 2, and 6 mo after grafting. The urethral grafts were analyzed grossly and histologically.

RESULTS

Scanning electron microscope and a porosity test revealed that the material had a three-dimensional porous structure. Urothelial cells grew on the material and showed good biocompatibility with the stretched silk fibroin matrices. Canines implanted with tissue-engineered mucosa voided without difficulty. Retrograde urethrography revealed no signs of stricture. Histologic staining showed gradual epithelial cell development and stratified epithelial layers at 1, 2, and 6 mo. The canines in the control group showed difficulty in voiding. Retrograde urethrography showed urethra stricture. Histologic staining showed that no or only one layer of epithelial cells developed. A severe inflammatory reaction was also observed in the control group.

CONCLUSIONS

Stretched electrospun silk fibroin matrices have good biocompatibility with urothelial cells, which could prove to be a potential material for use in urethra reconstruction.

Silk constructs for delivery of musculoskeletal therapeutics

Silk fibroin (SF) is a biopolymer with distinguishing features from many other bio- as well as synthetic polymers. From a biomechanical and drug delivery perspective, SF combines remarkable versatility for scaffolding (solid implants, hydrogels, threads, solutions), with advanced mechanical properties and good stabilization and controlled delivery of entrapped protein and small molecule drugs, respectively. It is this combination of mechanical and pharmaceutical features which renders SF so exciting for biomedical applications. This pattern along with the versatility of this biopolymer has been translated into progress for musculoskeletal applications. We review the use and potential of silk fibroin for systemic and localized delivery of therapeutics in diseases affecting the musculoskeletal system. We also present future directions for this biopolymer as well as the necessary research and development steps for their achievement.

A silk hydrogel-based delivery system of bone morphogenetic protein for the treatment of large bone defects

The use of tissue grafting for the repair of large bone defects has numerous limitations including donor site morbidity and the risk of disease transmission. These limitations have prompted research efforts to investigate the effects of combining biomaterial scaffolds with biochemical cues to augment bone repair. The goal of this study was to use a critically-sized rat femoral segmental defect model to investigate the efficacy of a delivery system consisting of an electrospun polycaprolactone (PCL) nanofiber mesh tube with a silk fibroin hydrogel for local recombinant bone morphogenetic protein 2 (BMP-2) delivery. Bilateral 8 mm segmental femoral defects were formed in 13-week-old Sprague Dawley rats. Perforated electrospun PCL nanofiber mesh tubes were fitted into the adjacent native bone such that the lumen of the tubes contained the defect (Kolambkar et al., 2011b). Silk hydrogels with or without BMP-2 were injected into the defect. Bone regeneration was longitudinally assessed using 2D X-ray radiography and 3D microcomputed topography (μCT). Following sacrifice at 12 weeks after surgery, the extracted femurs were either subjected to biomechanical testing or assigned for histology. The results demonstrated that silk was an effective carrier for BMP-2. Compared to the delivery system without BMP-2, the delivery system that contained BMP-2 resulted in more bone formation (p<0.05) at 4, 8, 12 weeks after surgery. Biomechanical properties were also significantly improved in the presence of BMP-2 (p<0.05) and were comparable to age-matched intact femurs. Histological evaluation of the defect region indicated that the silk hydrogel has been completely degraded by the end of the study. Based on these results, we conclude that a BMP-2 delivery system consisting of an electrospun PCL nanofiber mesh tube with a silk hydrogel presents an effective strategy for functional repair of large bone defects.

Silk fibroin biomaterials for controlled release drug delivery

INTRODUCTION

Given the benefits of polymer drug delivery implants over traditional periodic systemic administration, the development of biomaterial systems with the necessary properties (biocompatibility, degradation, stabilization, controllability) is paramount. Silk fibroin represents a promising, naturally derived polymer for local, controlled, sustained drug release from fully degrading implants and the polymer can be processed into a broad array of material formats.

AREAS COVERED

This review provides an overview of silk biomaterials for drug delivery, especially those that can function as long-term depots. Fundamentals of structure and assembly, processing options, control points and specific examples of implantable silk drug delivery systems (sponges, films) and injectable systems (microspheres, hydrogels) from the 1990s and onwards are reviewed.

EXPERT OPINION

Owing to its unique material properties, stabilization effects and tight controllability, silk fibroin is a promising biomaterial for implantable and injectable drug delivery applications. Many promising control points have been identified, and characterization of the relationships between silk processing and/or material properties and the resulting drug loading and release kinetics will ultimately enhance the overall utility of this unique biomaterial. The ever-expanding biomaterial 'tool kit' that silk provides will eventually allow the simultaneous optimization of implant structure, material properties and drug release behavior that is needed to maximize the cost-efficiency, convenience, efficacy and safety of many new and existing therapeutics, especially those that cannot be delivered by means of traditional administration approaches.

Evaluation of gel spun silk-based biomaterials in a murine model of bladder augmentation

Currently, gastrointestinal segments are considered the gold standard for bladder reconstructive procedures. However, significant complications including chronic urinary tract infection, metabolic abnormalities, urinary stone formation, bowel dysfunction, and secondary malignancies are associated with this approach. Biomaterials derived from silk fibroin may represent a superior alternative due their robust mechanical properties, biodegradable features, and processing plasticity. In the present study, we evaluated the efficacy of a gel spun silk-based matrix for bladder augmentation in a murine model. Over the course of 70 d implantation period, H&E and Masson's trichrome (MTS) analysis revealed that silk matrices were capable of supporting both urothelial and smooth muscle regeneration at the defect site. Prominent uroplakin and contractile protein expression (α-actin, calponin, and SM22α) was evident by immunohistochemical analysis demonstrating maturation of the reconstituted bladder wall compartments. Gel spun silk matrices also elicited a minimal acute inflammatory reaction following 70 d of bladder integration, in contrast to parallel assessments of small intestinal submucosa (SIS) and poly-glycolic acid (PGA) matrices which routinely promoted evidence of fibrosis and chronic inflammatory responses. Voided stain on paper analysis revealed that silk augmented animals displayed similar voiding patterns in comparison to non surgical controls by 42 d of implantation. In addition, cystometric evaluations of augmented bladders at 70 d post-op demonstrated that silk scaffolds supported significant increases in bladder capacity and voided volume while maintaining similar degrees of compliance relative to the control group. These results provide evidence for the utility of gel spun silk-based matrices for functional bladder tissue engineering applications.