Histo-mechanical properties of the swine cardinal and uterosacral ligaments

Towards the biomechanical modelling of the behaviour of ex-vivo porcine perineal tissues

The perineum is a layered soft tissue structure with mechanical properties that maintain the integrity of the pelvic floor. During childbirth, the perineum undergoes significant deformation that often results in tears of various degrees of severity. To better understand the mechanisms underlying perineal tears, it is crucial to consider the mechanical properties of the different tissues that make up the perineum. Unfortunately, there is a lack of data on the mechanical properties of the perineum in the literature. The objective of this study is to partly fill these gaps. Hence sow perineums were dissected and the five perineal tissues involved in tears were characterized by uniaxial tension tests: Skin, Vagina, External Anal Sphincter, Internal Anal Sphincter and Anal Mucosa. From our knowledge, this study is the first to investigate all these tissues and to design a testing protocol to characterize their material properties. Six material models were used to fit the experimental data and the correlation between experimental and predicted data was evaluated for comparison. As a result, even if the tissues are of different nature, the best correlation was obtained with the Yeoh and Martins material models for all tissues. Moreover, these preliminary results show the difference in stiffness between the tissues which indicates that they might have different roles in the structure. These obtained results will serve as a basis to design an improved experimental protocol for a more robust structural model of the porcine perineum that can be used for the human perineum to predict perineal tears.

Single-cell analysis of uterosacral ligament revealed cellular heterogeneity in women with pelvic organ prolapse

Pelvic organ prolapse (POP) markedly affects the quality of life of women, including significant financial burden. Using single-cell RNA sequencing, we constructed a transcriptional profile of 30,452 single cells of the uterosacral ligament in POP and control samples, which has never been constructed before. We identified 10 major cell types, including smooth muscle cells, endothelial cells, fibroblasts, neutrophils, macrophages, monocytes, mast cells, T cells, B cells, and dendritic cells. We performed subpopulation analysis and pseudo-time analysis of POP primary cells, and explored differentially expressed genes. We verified previous cell clusters of human neutrophils of uterosacral ligaments. We found a significant reduction in receptor-ligand pairs related to ECM and cell adhesion between fibroblasts and endothelial cells in POP. The transcription factors related to the extracellular matrix, development, and immunity were identified in USL. Here we provide insight into the molecular mechanisms of POP and valuable information for future research directions.

Mechanical properties of animal ligaments: a review and comparative study for the identification of the most suitable human ligament surrogates

The interest in the properties of animal soft tissues is often related to the desire to find an animal model to replace human counterparts due to the unsteady availability of human tissues for experimental purposes. Once the most appropriate animal model is identified, it is possible to carry out ex-vivo and in-vivo studies for the repair of ligamentous tissues and performance testing of replacement and support healing devices. This work aims to present a systematic review of the mechanical properties of ligaments reported in the scientific literature by considering different anatomical regions in humans and several animal species. This study was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) method. Moreover, considering the lack of a standard protocol for preconditioning of tissues, this aspect is also addressed. Ninety-six studies were selected for the systematic review and analysed. The mechanical properties of different animal species are reported and summarised in tables. Only results from studies reporting the strain rate parameter were considered for comparison with human ligaments, as they were deemed more reliable. Elastic modulus, ultimate tensile stress, and ultimate strain properties are graphically reported identifying the range of values for each animal species and to facilitate comparison between values reported in the scientific literature in animal and human ligaments. Useful similarities between the mechanical properties of swine, cow, and rat and human ligaments have been found.

Ex Vivo Uniaxial Tensile Properties of Rat Uterosacral Ligaments

This manuscript presents new experimental methods for testing the ex vivo tensile properties of the uterosacral ligaments (USLs) in rats. The USL specimens ([Formula: see text]) were carefully dissected to preserve their anatomical attachments, and they were loaded along their main in vivo loading direction (MD) using a custom-built uniaxial tensile testing device. During loading, strain maps in both the MD and the perpendicular direction (PD) were collected using the digital image correlation technique. The mean (± S.E.M.) maximum load and displacement at the maximum load were [Formula: see text] N and [Formula: see text] mm, respectively. The USLs were found to be highly heterogeneous structures, with some specimens experiencing strains in the MD that were lower than [Formula: see text] and others reaching strains that were up to [Formula: see text] in the intermediate region. At 0.5 kPa stress, a value reached by all the specimens, the mean strain in the MD was [Formula: see text] while at 5 kPa stress, a value achieved only by 9 out of the 21 specimens, the mean strain increased to [Formula: see text]. Under uniaxial loading, the specimens also elongated in the PD, with strains that were one order of magnitude lower than the strains in the MD; at the 0.5 kPa stress, the mean strain in the PD was recorded to be [Formula: see text] and, at the 5 kPa stress, the strain in the PD was [Formula: see text]. The directions of maximum principal strains remained almost unchanged with the increase in stress, indicating that little microstructural re-organization occurred due to uniaxial loading. This study serves as a springboard for future investigations on the supportive function of the USLs in the rat model by offering guidelines on testing methods that capture their complex mechanical behavior.

Comparison of in vivo visco-hyperelastic properties of uterine suspensory tissue in women with and without pelvic organ prolapse

The uterine suspensory tissue (UST) complex includes the cardinal (CL) and uterosacral "ligaments" (USL), which are mesentery-like structures that play a role in resisting pelvic organ prolapse (POP). Since there is no information on the time-dependent material properties of the whole structure in situ and in vivo, we developed and tested an intraoperative technique to quantify in vivo whether there is a significant difference in visco-hyperelastic behavior of the CL and USL between women with and without POP. Thirteen women with POP (cases) and four controls scheduled for surgery were selected from an ongoing POP study. Immediately prior to surgery, a computer-controlled linear servo-actuator with a series force transducer applied a continuous, caudally directed traction force while simultaneously recording the resulting cervical displacement in the same direction. After applying an initial 1.1 N preload, a ramp rate of 4 mm/s was used to apply a maximum force of 17.8 N in three "ramp-and-hold" test trials. A simplified bilateral four-cable biomechanical model was used to identify the material behavior of each ligament. For this, the initial cross-section areas of the CL and USL were measured on 3-T magnetic resonance image-based 3D models from each subject. The time-dependent strain energy function of CL/USL was defined with a three-parameter hyperelastic Mooney-Rivlin material model and a two-term Prony series in relaxation form. When cases were compared with controls, the estimated time-dependent material constants of CL and USL did not differ significantly. These are the first measurements that compare the in vivo and in situ visco-hyperelastic response of the tissues comprising the CL and USL to loading in women with and without prolapse. Larger sample sizes would help improve the precision of intergroup differences.

Mechanics of Uterosacral Ligaments: Current Knowledge, Existing Gaps, and Future Directions

The uterosacral ligaments (USLs) are important anatomical structures that support the uterus and apical vagina within the pelvis. As these structures are over-stretched, become weak, and exhibit laxity, pelvic floor disorders such as pelvic organ prolapse occur. Although several surgical procedures to treat pelvic floor disorders are directed toward the USLs, there is still a lot that is unknown about their function. This manuscript presents a review of the current knowledge on the mechanical properties of the USLs. The anatomy, microstructure, and clinical significance of the USLs are first reviewed. Then, the results of published experimental studies on the in vivo and ex vivo, uniaxial and biaxial tensile tests are compiled. Based on the existing findings, research gaps are identified and future research directions are discussed. The purpose of this exhaustive review is to help new researchers navigate scientific literature on the mechanical properties of the USLs. The use of these structures remains very popular in reconstructive surgeries that restore and augment the support of pelvic organs, especially as synthetic surgical mesh implants continue to be highly controversial.

Effects of short-term moderate ZEN consumption on uterosacral ligament elasticity in pubertal gilts

Zearalenone (ZEN) is a potent estrogenic toxin in swine, contributing to economic losses in herds via reproductive consequences such as pelvic organ prolapse (POP). To better understand the relationship between ZEN-consumption and reproductive symptoms, an animal feeding study with pubertal gilts was designed. The gilts were exposed to three different treatments: solvent-only feed for 21 days (n = 10), ZEN-spiked feed for 7 days followed by solvent-only feed for 14 days (n = 10), and ZEN-spiked feed for 21 days (n = 10). The gilts did not display any ZEN-related symptoms throughout any of the treatments. At the end of the trial the elastic properties of the USLs from participating gilts were evaluated along two loading directions: main direction (MD) and perpendicular direction (PD). The elastic properties included average stresses at 2% and 4% strains, and secant moduli. Overall the elastic properties of the USLs did not vary across treatment groups or between loading directions. In the MD, average stress increased from 32.96 ± 4.43 kPa at 2% strain to 63.21 ± 9.69 kPa at 4% strain, with a secant modulus of 1.52 ± 0.27 MPa. In the PD, average stress increased from 40.82 ± 4.22 kPa at 2% strain to 83.38 ± 9.17 kPa at 4% strain, with a secant modulus of 2.13 ± 0.31 MPa. Continued research into the relationship between ZEN consumption and reproductive symptoms such as POP is necessary in order to mitigate their deleterious effects in herds.

Mechanical Analysis of the Uterosacral Ligament: Swine vs. Human

The uterosacral ligament (USL) is a major suspensory structure of the female pelvic floor, providing support to the cervix and/or upper vagina. It plays a pivotal role in surgical procedures for pelvic organ prolapse (POP) aimed at restoring apical support. Despite its important mechanical function, little is known about the mechanical properties of the USL due to the constraints associated with in vivo testing of human USL and the lack of validated large animal models that enable such investigations. In this study, we provide the first comparison of the mechanical properties of swine and human USLs. Preconditioning and pre-creep data up to a 2 N load and creep data under a 2 N load over 1200 s were obtained on swine (n = 9) and human (n = 9) USL specimens by performing planar equi-biaxial tensile tests and using the digital image correlation method. No differences in the peak strain during preconditioning tests, secant modulus of the pre-creep response, and strain at the end of creep tests were detected in the USLs from the two species along both axial loading directions (the main in vivo loading direction and the direction that is perpendicular to it). These findings suggest that the swine holds promise as large animal model for studying the mechanical role of the USL in apical vaginal support and treatment of POP.

Biaxial Mechanical Assessment of the Murine Vaginal Wall Using Extension-Inflation Testing

Progress toward understanding the underlying mechanisms of pelvic organ prolapse (POP) is limited, in part, due to a lack of information on the biomechanical properties and microstructural composition of the vaginal wall. Compromised vaginal wall integrity is thought to contribute to pelvic floor disorders; however, normal structure-function relationships within the vaginal wall are not fully understood. In addition to the information produced from uniaxial testing, biaxial extension-inflation tests performed over a range of physiological values could provide additional insights into vaginal wall mechanical behavior (i.e., axial coupling and anisotropy), while preserving in vivo tissue geometry. Thus, we present experimental methods of assessing murine vaginal wall biaxial mechanical properties using extension-inflation protocols. Geometrically intact vaginal samples taken from 16 female C57BL/6 mice underwent pressure-diameter and force-length preconditioning and testing within a pressure-myograph device. A bilinear curve fit was applied to the local stress-stretch data to quantify the transition stress and stretch as well as the toe- and linear-region moduli. The murine vaginal wall demonstrated a nonlinear response resembling that of other soft tissues, and evaluation of bilinear curve fits suggests that the vagina exhibits pseudoelasticity, axial coupling, and anisotropy. The protocols developed herein permit quantification of biaxial tissue properties. These methods can be utilized in future studies in order to assess evolving structure-function relationships with respect to aging, the onset of prolapse, and response to potential clinical interventions.

Modelling of Soft Connective Tissues to Investigate Female Pelvic Floor Dysfunctions

After menopause, decreased levels of estrogen and progesterone remodel the collagen of the soft tissues thereby reducing their stiffness. Stress urinary incontinence is associated with involuntary urine leakage due to pathological movement of the pelvic organs resulting from lax suspension system, fasciae, and ligaments. This study compares the changes in the orientation and position of the female pelvic organs due to weakened fasciae, ligaments, and their combined laxity. A mixture theory weighted by respective volume fraction of elastin-collagen fibre compound (5%), adipose tissue (85%), and smooth muscle (5%) is adopted to characterize the mechanical behaviour of the fascia. The load carrying response (other than the functional response to the pelvic organs) of each fascia component, pelvic organs, muscles, and ligaments are assumed to be isotropic, hyperelastic, and incompressible. Finite element simulations are conducted during Valsalva manoeuvre with weakened tissues modelled by reduced tissue stiffness. A significant dislocation of the urethrovesical junction is observed due to weakness of the fascia (13.89 mm) compared to the ligaments (5.47 mm). The dynamics of the pelvic floor observed in this study during Valsalva manoeuvre is associated with urethral-bladder hypermobility, greater levator plate angulation, and positive Q-tip test which are observed in incontinent females.

Surgical treatment of vaginal vault prolapse using different prosthetic mesh implants: a finite element analysis

Particularly multiparous elderly women may suffer from vaginal vault prolapse after hysterectomy due to weak support from lax apical ligaments. A decreased amount of estrogen and progesterone in older age is assumed to remodel the collagen thereby reducing tissue stiffness. Sacrocolpopexy is either performed as open or laparoscopic surgery using prosthetic mesh implants to substitute lax ligaments. Y-shaped mesh models (DynaMesh, Gynemesh, and Ultrapro) are implanted in a 3D female pelvic floor finite element model in the extraperitoneal space from the vaginal cuff to the first sacral (S1) bone below promontory. Numerical simulations are conducted during Valsalva maneuver with weakened tissues modeled by reduced tissue stiffness. Tissues are modeled as incompressible, isotropic hyperelastic materials whereas the meshes are modeled either as orthotropic linear elastic or as isotropic hyperlastic materials. The positions of the vaginal cuff and the bladder base are calculated from the pubococcygeal line for female pelvic floor at rest, for prolapse and after repair using the three meshes. Due to mesh mechanics and mesh pore deformation along the loaded direction, the DynaMesh with regular rectangular mesh pores is found to provide better mechanical support to the organs than the Gynemesh and the Ultrapro with irregular hexagonal mesh pores.

Effects of repeated biaxial loads on the creep properties of cardinal ligaments

The cardinal ligament (CL) is one of the major pelvic ligaments providing structural support to the vagina/cervix/uterus complex. This ligament has been studied mainly with regards to its important function in the treatment of different diseases such as surgical repair for pelvic organ prolapse and radical hysterectomy for cervical cancer. However, the mechanical properties of the CL have not been fully determined, despite the important in vivo supportive role of this ligament within the pelvic floor. To advance our limited knowledge about the elastic and viscoelastic properties of the CL, we conducted three consecutive planar equi-biaxial tests on CL specimens isolated from swine. Specifically, the CL specimens were divided into three groups: specimens in group 1 (n = 7) were loaded equi-biaxially to 1 N, specimens in group 2 (n = 8) were loaded equi-biaxially to 2N, and specimens in group 3 (n = 7) were loaded equi-biaxially to 3N. In each group, the equi-biaxial loads of 1N, 2N, or 3N were applied and kept constant for 1200s three times. The two axial loading directions were selected to be the main in-vivo loading direction of the CL and the direction that is perpendicular to it. Using the digital image correlation (DIC) method, the in-plane Lagrangian strains in these two loading directions were measured throughout the tests. The results showed that CL was elastically anisotropic, as statistical differences were found between the mean strains along the two axial loading directions for specimens in group 1, 2, or 3 when the equi-biaxial load reached 1N, 2N, or 3N, respectively. For specimens in group 1 and 2, no statistical differences were detected in the mean normalized strains (or, equivalently, the increase in strain over time) between the two axial loading directions for each creep test. For specimens in group 3, some differences were noted but, by the end of the 3rd creep test, there were no statistical differences in the mean normalized strains between the two axial loading directions. These findings indicated that the increase in strain over time by the end of the 3rd creep test were comparable along these directions. The greatest mean normalized strain (or, equivalently, the largest increase in strain over time) was measured at the end of the 1st creep test (t=1200s), regardless of the equi-biaxial load magnitude or loading direction. Mean normalized strains during the 2nd and 3rd creep tests (t = 100, 600, and 1200s), along each loading direction, were not statistically different. Isochronal data collected at 1N, 2N, or 3N equi-biaxial loads indicated that the CL may be a nonlinear viscoelastic material. Overall, this experimental study offers new knowledge of the mechanical properties of the CL that can guide the development of better treatment methods such as surgical reconstruction for pelvic organ prolapse and radical hysterectomy for cervical cancer.

Female pelvic floor biomechanics: bridging the gap

PURPOSE OF REVIEW

The pelvic floor is a complex assembly of connective tissues and striated muscles that simultaneously counteracts gravitational forces, inertial forces, and intra-abdominal pressures while maintaining the position of the pelvic organs. In 30% of women, injury or failure of the pelvic floor results in pelvic organ prolapse. Surgical treatments have high recurrence rates, due, in part, to a limited understanding of physiologic loading conditions. It is critical to apply biomechanics to help elucidate how altered loading conditions of the pelvis contribute to the development of pelvic organ prolapse and to define surgeries to restore normal support.

RECENT FINDINGS

Evidence suggests the ewe is a potential animal model for studying vaginal properties and that uterosacral and cardinal ligaments experience significant creep, which may be affecting surgical outcomes. A new method of measuring ligament displacements in vivo was developed, and finite element models that simulate urethral support, pelvic floor dynamics, and the impact of episiotomies on the pelvic floor were studied.

SUMMARY

The current review highlights some contributions over the past year, including mechanical testing and the creation of models, which are used to understand pelvic floor changes with loading and the impact of surgical procedures, to illustrate how biomechanics is being utilized.

Micro-structural and Biaxial Creep Properties of the Swine Uterosacral-Cardinal Ligament Complex

The uterosacral ligament and cardinal ligament (USL/CL) complex is the major suspensory tissue of the uterus, cervix, and vagina. This tissue is subjected primarily to bi-axial forces in-vivo that significantly alter its structure and dimension over time, compromising its support function and leading to pelvic floor disorders. In this study, we present the first rigorous characterization of the collagen fiber microstructure and creep properties of the swine USL/CL complex by using scanning electron microscopy and planar biaxial testing in combination with three-dimensional digital image correlation. Collagen fiber bundles were found to be arranged into layers. Although the fiber bundles were oriented in multiple directions, 80.8% of them were aligned within ±45[Formula: see text] to the main in-vivo loading direction. The straightness parameter, defined as the ratio of the end-to-end distance of a fiber bundle to its length, varied from 0.28 to 1.00, with 95.2% fiber bundles having a straightness parameter between 0.60 and 1.00. Under constant equi-biaxial loads of 2 and 4 N, the USL/CL complex exhibited significant creep both along the main in-vivo loading direction (the parallel direction) and along the direction perpendicular to it (the perpendicular direction). Specifically, over a 120-min period, the mean strain increased by 20-34[Formula: see text] in the parallel direction and 33-41[Formula: see text] in the perpendicular direction. However, there was no statistically significant difference in creep strains observed after 120 min between the parallel and perpendicular directions for either the 2 or 4 N load case. Creep proceeded slightly faster in the perpendicular direction under the equi-biaxial load of 2 N than under the equi-biaxial load of 4 N ([Formula: see text]). It proceeded significantly faster in the parallel direction under the equi-biaxial loads of 2 N than under the equi-biaxial loads of 4 N ([Formula: see text]). Overall, our findings contribute to a greater understanding of the biomaterial properties of the USL/CL complex that is needed for the development of new surgical reconstruction methods and mesh materials for pelvic floor disorders.

Printing Three-Dimensional Heterogeneities in the Elastic Modulus of an Elastomeric Matrix

We present a rapid and controllable method to create microscale heterogeneities in the 3D stiffness of a soft material by printing patterns with a ferrofluid ink. An ink droplet moved through a liquid polydimethylsiloxane (PDMS) volume using an externally applied magnetic field sheds clusters of magnetic nanoparticles (MNPs) in its wake. By varying the field spatiotemporally, a well-defined three-dimensional curvilinear feature is printed that contains MNP clusters. Subsequent cross-linking of the PDMS preserves the feature in place after the magnetic field is removed. Since the ferrofluid ink interferes with the cross-linking of PDMS, a 3D print containing ink density variations leads to corresponding spatial deviations in the elastic modulus of the matrix. The modulus is mapped in the experiments with atomic force microscopy. This rapid method to print 3D heterogeneities in soft matter promises the ability to mimic mechanical variations that occur in natural biomaterials.