Importance of age on the dynamic mechanical behavior of intertubular and peritubular dentin

Dentin Mechanobiology: Bridging the Gap between Architecture and Function

It is remarkable how teeth maintain their healthy condition under exceptionally high levels of mechanical loading. This suggests the presence of inherent mechanical adaptation mechanisms within their structure to counter constant stress. Dentin, situated between enamel and pulp, plays a crucial role in mechanically supporting tooth function. Its intermediate stiffness and viscoelastic properties, attributed to its mineralized, nanofibrous extracellular matrix, provide flexibility, strength, and rigidity, enabling it to withstand mechanical loading without fracturing. Moreover, dentin's unique architectural features, such as odontoblast processes within dentinal tubules and spatial compartmentalization between odontoblasts in dentin and sensory neurons in pulp, contribute to a distinctive sensory perception of external stimuli while acting as a defensive barrier for the dentin-pulp complex. Since dentin's architecture governs its functions in nociception and repair in response to mechanical stimuli, understanding dentin mechanobiology is crucial for developing treatments for pain management in dentin-associated diseases and dentin-pulp regeneration. This review discusses how dentin's physical features regulate mechano-sensing, focusing on mechano-sensitive ion channels. Additionally, we explore advanced in vitro platforms that mimic dentin's physical features, providing deeper insights into fundamental mechanobiological phenomena and laying the groundwork for effective mechano-therapeutic strategies for dentinal diseases.

A New Landscape of Human Dental Aging: Causes, Consequences, and Intervention Avenues

Aging is accompanied by physical dysfunction and physiologic degeneration that occurs over an individual's lifetime. Human teeth, like many other organs, inevitably undergo chronological aging and age-related changes throughout the lifespan, resulting in a substantial need for preventive, restorative as well as periodontal dental care. This is particularly the case for seniors at 65 years of age and those older but economically disadvantaged. Dental aging not only interferes with normal chewing and digestion, but also affects daily appearance and interpersonal communications. Further dental aging can incur the case of multiple disorders such as oral cancer, encephalitis, and other systemic diseases. In the next decades or even hundreds of years, the proportion of the elderly in the global population will continue to rise, a tendency that attracts increasing attention across multiple scientific and medical disciplines. Dental aging will bring a variety of problems to the elderly themselves and poses serious challenges to the medical profession and social system. A reduced, but functional dentition comprising 20 teeth in occlusion has been proposed as a measurement index of successful dental aging. Healthy dental aging is critical to healthy aging, from both medical and social perspectives. To date, biomedical research on the causes, processes and regulatory mechanisms of dental aging is still in its infancy. In this article, updated insights into typical manifestations, associated pathologies, preventive strategies and molecular changes of dental aging are provided, with future research directions largely projected.

Correlative Atomic Force Microscopy and Raman Spectroscopy in Acid Erosion of Dentin

Physical properties and chemical composition are fundamentally defining and interconnected surface characteristics. However, few techniques are able to capture both in a correlative fashion at the same sample location and orientation. This is especially important for complex materials such as dentin, which is an inner tooth structure and is a heterogeneous, composite inorganic-organic material with open channels (tubules) that extend toward the tooth pulp. Here, a combined microscope system consisting of an atomic force microscope and a confocal Raman spectrometer was used to study the correlative physical and chemical properties of human dentin. The local hardness of dentin was highly correlated with the Raman signal ratio of inorganic to organic material, and this was enhanced in the peritubular regions of dentin. When the samples were etched with citric acid, Young's modulus, hardness, and inorganic-to-organic material ratio decreased significantly, collagen fibrils on the surface were exposed, the peritubular regions were removed, and the tubule diameters increased. Thus, the combined atomic force microscopy (AFM)-Raman approach allows for comprehensive and correlative physical-chemical analysis of material surfaces and will be invaluable for evaluating oral therapeutic strategies.

The effect of pulp volume and impact direction on the stress and strain distribution during an impact

BACKGROUND/AIM

Dentoalveolar trauma has a high incidence in different age groups, including the extremes, children, and older people. Mouth aging leads to some changes, one of them being the pulp volume reduction. The aim of this study was to evaluate the influence of different pulp cavity volumes and the impact direction on the stress and strain distribution of a maxillary central incisor.

MATERIAL AND METHODS

Twenty cone beam computed tomography sets of images were selected and the pulp cavity volume was measured by ITK-SNAP software. The mean pulp cavity volume for age group of 10- to 12-year-olds was calculated to obtain the largest one. Subsequent reductions (25%, 50%, 75% and 100%) in the pulp volume values were made to simulate the aging process. The maxilla anterior segment was modeled in the Rhinoceros 5.0 software. The three-dimensional volumetric mesh was generated using the Patran software (MSC. Software), with isoparametrics, 4-noded tetrahedral elements, and exported to Marc/Mentat (MSC. Software) as element number 134. A non-linear dynamic impact analysis was performed in which a steel ball reached the central incisor at a speed of 5 m/s in the horizontal or vertical direction. The stresses were evaluated by modified von Mises stresses. The strains and the total displacement were also recorded.

RESULTS

The pulp volume mean value for the age group of 10- to 12-year-olds was 65.05 mm3 . Stress concentrations were slightly different for the different pulp volumes. Impact directions resulted in different stress distribution. Higher stress values were present with the horizontal impact (range between 25.18 MPa and 24.08 MPa for enamel and 38.89 MPa and 37.03 for dentin) when compared to vertical impact (range between 15.30 MPa and 14.58 for enamel and 24.77 to 22.03 MPa for dentin). Total displacement was different for the two impact directions and higher for the horizontal impact.

CONCLUSION

Pulp volume did not significantly affect the stress, strain, and total displacement during the impact but the impact direction did affect the evaluated parameters during impact.

Heat generated during dental treatments affecting intrapulpal temperature: a review

INTRODUCTION

Heat is generated and transferred to the dentine-pulp complex during various dental procedures, such as from friction during cavity preparations, exothermic reactions during the polymerisation of restorative materials and when polishing restorations. For in vitro studies, detrimental effects are possible when intra-pulpal temperature increases by more than 5.5°C (that is, the intra-pulpal temperature exceeds 42.4°C). This excessive heat transfer results in inflammation and necrosis of the pulp. Despite numerous studies stating the importance of heat transfer and control during dental procedures, there are limited studies that have quantified the significance. Past studies incorporated an experimental setup where a thermocouple is placed inside the pulp of an extracted human tooth and connected to an electronic digital thermometer.

METHODS

This review identified the opportunity for future research and develop both the understanding of various influencing factors on heat generation and the different sensor systems to measure the intrapulpal temperature.

CONCLUSION

Various steps of dental restorative procedures have the potential to generate considerable amounts of heat which can permanently damage the pulp, leading to pulp necrosis, discoloration of the tooth and eventually tooth loss. Thus, measures should be undertaken to limit pulp irritation and injury during procedures. This review highlighted the gap for future research and a need for an experimental setup which can simulate pulp blood flow, temperature, intraoral temperature and intraoral humidity to accurately simulate the intraoral conditions and record temperature changes during various dental procedures.

Effects of cryopreservation on the biomechanical properties of dentin in cryopreserved teeth: An in-vitro study

This study focused on the biomechanical properties and microstructural changes in dentin of teeth in different age groups after cryopreserved for different durations. Ninety third molars from three age groups (youth group, middle-age group, and elderly group), were collected and randomly divided into three groups according to freezing time at -196 °C (7 days, 30 days, and 90 days). Control group was shored at ordinary temperature. After rewarming, the compressive strength and elastic modulus of the dentin were measured with an electronic universal tester. Scanning electron microscopy was used to evaluate the microstructure of dentin after cryopreservation. After cryopreservation, the compressive strength of the teeth in each experimental group was not significantly different from control group. With the increase of freezing time and age, dentin's elastic modulus showed a decreasing trend. There were statistically significances between the control group and freezing 90d group, freezing 7d and 90d group, youth and middle-aged group, youth and elderly group (P < 0.05). Both freezing time and age factors were significant for the elastic modulus of dentin(P＜0.05). There was no interaction effect for age and freezing time. In transverse sections of scanning electron microscopy, the dentinal tubule became narrower, partially occluded, and more easily adhered to impurities in the long freezing time and elderly group. In longitudinal sections, with freezing time and age, the inner wall of the dentinal tubules became rough especially in the aged group cryopreserved for 90 days. No significant microcracks exited in any of the longitudinal sections of dentin.

Micro-CT evaluation of frozen and embalmed human cadavers on the effect of root canal preparation on microcrack formation in old dentin

The aim of this study was to evaluate the existence of preoperative dentinal defects among differently preserved dentoalveolar bone-blocks (frozen vs. embalmed) and to investigate the effect of varying apical forces (low: <4 N, high: 4-8 N) during root canal preparation on microcrack formation using micro-computed tomography (micro-CT). Thirteen embalmed and seven frozen bone-blocks containing 1-3 single rooted teeth were collected. The teeth were evenly divided into three groups (n = 10): FLow (frozen, <4 N), ELow (embalmed, <4 N), EHigh (embalmed, 4-8 N). After working length determination all specimens were scanned preoperatively. Root canal preparation was performed using nickel-titanium instruments sizes 25/.06 and 40/.06 (F6 SkyTaper; Komet, Lemgo, Germany). A postoperative scan was performed and image stacks were co-registered. All cross-sectional images were screened to identify the presence of dentinal defects. The results were expressed as the percentage of teeth/slices presenting dentinal defects. The statistical analyses were performed with Kruskal-Wallis-Test and Mann-Whitney-U-Test (α = 5%). Embalmed specimens presented a significantly higher percentage of slices with preoperative microcracks (p<0.05) than frozen specimens. No significant difference between groups was observed regarding the induction of microcracks (p>0.05). Root canal preparation does not induce microcracks in dentoalveolar bone-blocks from donors of old age, irrespective of the preservation method and the apically directed forces.

The multi-scale meso-mechanics model of viscoelastic dentin

Human dentin is a hierarchical material with multi-level micro-/nano-structures, consisting of tubule, perti-tubular dentin (PTD) and intertubular dentin (ITD) as the major constituents at microscale; and the PTD and ITD are further composed of collagen and hydroxyapatite (HAp) crystals with different volume fractions at nanoscale. In most cases, the HAp is considered as elastic while the collagen as viscoelastic material. It is of great significance to study the hierarchical structure and viscoelasticity of human dentin to understand the mechanical properties of dentin for further development of restorative materials. Based on this, this paper focuses on multiscale modeling of the elastic properties and dynamic viscoelastic response of dentin and establishes a bottom-up micromechanics model from nano-to macro-scale. In order to study the nanostructural effect on the viscoelastic behavior of hierarchical structures, the homogenization theories of random platelets composites (HTRPC) and the locally-exact homogenization theory (LEHT) are introduced for the homogenization of heterogeneous materials of microstructures at different levels. The HTRPC, based on Eshelby Inclusion theory, is used to predict the effective modulus of PTD and ITD. The LEHT is a method for homogenizing multiphase dentin characterized by repeated unit cells (RUCs). The resulting predictions are in very good agreement with several experimental data from the literature. In addition, the results of nanostructrual effect on dentin show that the viscoelasticity of dentin is majorly contributed by collagen and the HAp greatly provide the strength and hardness of dentin. Furthermore, the ageing effect on dentin's viscoelasticity is considered from the proposed multiscale micromechanics model. It is demonstrated that the ageing effect is much more influential in affecting the loss moduli of dentin than the storage.

Instrumented nanoindentation in musculoskeletal research

Musculoskeletal tissues, such as bone, cartilage, and muscle, are natural composite materials that are constructed with a hierarchical structure ranging from the cell to tissue level. The component differences and structural complexity, together, require comprehensive multiscale mechanical characterization. In this review, we focus on nanoindentation testing, which is used for nanometer to sub-micrometer length scale mechanical characterization. In the following context, we will summarize studies of nanoindentation in musculoskeletal research, examine the critical factors that affect nanoindentation testing results, and briefly summarize other commonly used techniques that can be conjoined with nanoindentation for synchronized imaging and colocalized characterization.

Dynamic dentin: A quantitative microscopic assessment of age and spatial changes to matrix architecture, peritubular dentin, and collagens types I and III

To investigate age and site-related changes to human dentin collagen, sound human teeth collected from donors aged 13-29 (young) and 50-74 (aged) years (n = 9/group) were cut to shallow and deep sites. Dentin collagen orientation and fibril bundling was investigated using the Picrosirius Red (PSR) stain observed under cross-polarized light microscopy (Pol), and collagen distribution was investigated using Confocal Laser Scanning Microscopy (CLSM). Collagen types III to I distribution in peritubular dentin (PTD) was revealed using Herovici stain and brightfield microscopy. Image analysis software and linear mixed modelling quantified outcomes. In situ dentin collagen was observed using Xenon Plasma Focussed Ion Beam Scanning Electron Microscopy (Xe PFIB-SEM). The PSR-Pol analysis revealed less coherently aligned and more bundled collagen fibrils in aged dentin (P = 0.005). Deep inner dentin collagen in both groups were less coherently aligned with reduced bundling. Regardless of age, CLSM showed collagen distribution remained stable; and more collagen type III was detectable in PTD located in inner dentin (Young: P = 0.006; Aged: P = 0.008). Observations following Xe PFIB-SEM cross-sectioning showed apatite-like deposits surrounding large intratubular collagen fibers, and evidence of smaller intertubular dentin collagen fibrils in situ. In conclusion, aging changes collagen network architecture, but not distribution or content.

Comparison of collagen features of distinct types of caries-affected dentin

OBJECTIVES

To compare the biodegradability, mechanical behavior, and physicochemical features of the collagen-rich extracellular matrix (ECM) of artificial caries-affected dentin (ACAD), natural caries-affected dentin (NCAD) and sound dentin (SD).

METHODS

Dentin specimens from human molars were prepared and assigned into groups according to the type of dentin: ACAD, NCAD, or SD. ACAD was produced by incubation of demineralized SD with Streptococcus mutans in a chemically defined medium (CDM) with 1% sucrose for 7 days at 37 °C under anaerobic conditions. Specimens were assessed to determine collagen birefringence, biodegradability, mechanical behavior, and chemical composition. Data were individually processed and analyzed by ANOVA and post-hoc tests (α = 0.05).

RESULTS

CDM-based biofilm challenge reduced loss, storage, and complex moduli in ACAD (p < 0.001), while the damping capacity remained unaffected (p = 0.066). Higher red and lower green birefringence were found in ACAD and NCAD when compared with SD (p < 0.001). Differently to ACAD, SD and NCAD presented higher biodegradability to exogenous proteases (p = 0.02). Chemical analysis of the integrated areas of characteristic bands that assess mineral quality (carbonate/phosphate and crystallinity index), mineral to matrix (phosphate/amide I) and post-translational modifications (amide III/CH₂, pentosidine/CH₂, and pentosidine/amide III) (p<0.05) showed that NCAD was significantly different from SD while ACAD exhibited intermediate values.

CONCLUSIONS

CDM-based biofilm challenge produced a dentin ECM with decreased mechanical properties and increased collagen maturity. The compositional and structural conformation of the ACAD suggested that CDM-based biofilm challenge showed potential to produce artificial lesions by revealing a transitional condition towards mimicking critical features of NCAD.

CLINICAL SIGNIFICANCE

This study highlights the importance of developing a tissue that mimics the features of natural caries-affected dentin ECM for in vitro studies. Our findings suggested the potential of a modified biofilm challenge protocol to produce and simulate a relevant substrate, such as caries-affected dentin.

3D-Printed Teeth in Endodontics: Why, How, Problems and Future-A Narrative Review

Three-dimensional printing offers possibilities for the development of new models in endodontics. Numerous studies have used 3D-printed teeth; however, protocols for the standardization of studies still need to be developed. Another problem with 3D-printed teeth is the different areas of literature requested to understand the processes. This review aims to gather evidence about 3D-printed teeth on the following aspects: (1) why they are advantageous; (2) how they are manufactured; (3) problems they present; and (4) future research topics. Natural teeth are still the standard practice in ex vivo studies and pre-clinical courses, but they have several drawbacks. Printed teeth may overcome all limitations of natural teeth. Printing technology relies on 3D data and post-processing tools to form a 3D model, ultimately generating a prototype using 3D printers. The major concerns with 3D-printed teeth are the resin hardness and printing accuracy of the canal anatomy. Guidance is presented for future studies to solve the problems of 3D-printed teeth and develop well-established protocols, for the standardization of methods to be achieved. In the future, 3D-printed teeth have the possibility to become the gold standard in ex vivo studies and endodontic training.

The stoic tooth root: how the mineral and extracellular matrix counterbalance to keep aged dentin stable

Aging is a physiological process with profound impact on the biology and function of biosystems, including the human dentition. While resilient, human teeth undergo wear and disease, affecting overall physical, psychological, and social human health. However, the underlying mechanisms of tooth aging remain largely unknown. Root dentin is integral to tooth function in that it anchors and dissipates mechanical load stresses of the tooth-bone system. Here, we assess the viscoelastic behavior, composition, and ultrastructure of young and old root dentin using nano-dynamic mechanical analysis, micro-Raman spectroscopy, small angle X-ray scattering, atomic force and transmission electron microscopies. We find that the root dentin overall stiffness increases with age. Unlike other mineralized tissues and even coronal dentin, however, the ability of root dentin to dissipate energy during deformation does not decay with age. Using a deconstruction method to dissect the contribution of mineral and organic matrix, we find that the damping factor of the organic matrix does deteriorate. Compositional and ultrastructural analyses revealed higher mineral-to-matrix ratio, altered enzymatic and non-enzymatic collagen cross-linking, increased collagen d-spacing and fibril diameter, and decreased abundance of proteoglycans and sulfation pattern of glycosaminoglycans . Therefore, even in the absence of remodeling, the extracellular matrix of root dentin shares traits of aging with other tissues. To explain this discrepancy, we propose that altered matrix-mineral interactions, possibly mediated by carbonate ions sequestered at the mineral interface and/or altered glycosaminoglycans counteract the deleterious effects of aging on the structural components of the extracellular matrix. STATEMENT OF SIGNIFICANCE: Globally, a quarter of the population will be over 65 years old by 2050. Because many will retain their dentition, it will become increasingly important to understand and manage how aging affects teeth. Dentin is integral to the protective, biomechanical, and regenerative features of teeth. Here, we demonstrate that older root dentin not only has altered mechanical properties, but shows characteristic shifts in mineralization, composition, and post-translational modifications of the matrix. This strongly suggests that there is a mechanistic link between mineral and matrix components to the biomechanical performance of aging dentin with implications for efforts to slow or even reverse the aging process.

Evaluation of the damping capacity of common CAD/CAM restorative materials

OBJECTIVES

To evaluate and quantify the damping capacities of common CAD/CAM restorative materials (CRMs) and to assess their energy dissipation abilities by comparing loss tangent and Leeb hardness data.

METHODS

Leeb hardness (HLD), together with its deduced energy dissipation data (HLD_dis), and loss tangent values recorded via dynamic mechanical analysis (DMA) were determined for 4 ceramic, 13 composite, and 2 polymer-based CRMs as well as 1 metal. For Leeb hardness, ten indentations per material were performed on two separate specimens (12.0 × 12.0 × 3.5 mm³) after water storage (24 h; 37.0 ± 1.0 °C). For DMA, ten specimens (16.00 × 4.00 × 1.00 mm³ ± 0.05 mm) per material were investigated in distilled water (37.0 ± 0.5 °C) with a dynamic force of 1 N at 1.5 Hz. Each data set was analyzed using two-way analysis of variance (ANOVA) with material type and material nested in material type as factors. Post-ANOVA contrasts were performed using a Bonferroni adjustment for multiple comparisons (α = 0.05). Correlations between different parameters were tested (Pearson, α = 0.05).

RESULTS

HLD_dis data revealed the significantly highest damping capacity for metal and the lowest values for ceramics with composites and polymers in between. However, for loss tangent, the metal together with lithium disilicate glass-ceramics exhibited the lowest damping effects and polymer materials the highest results with composites likewise in between. A strong dependency of the loss tangent results on the filler content of the investigated CRMs was indicated (r = - 0.822, p < 0.001), while a positive and only moderate correlation between loss tangent and HLD_dis was observed (r = 0.565, p < 0.001), which conversely revealed a very strong correlation (r = 0.911, p < 0.001) if the metal was excluded from the calculation.

CONCLUSIONS

Although HLD_dis and loss tangent values both allowed a distinct differentiation of the damping capabilities of various CRMs and the respective material types, HLD_dis data appeared to more accurately describe the damping capacity of CRMs as the energy dissipation mechanism of permanent plastic material deformation, that is commonly observed for metals and some composite-based CRMs, is equally captured. This finding could be particularly interesting for the future development of new CRMs with improved mechanical properties as HLD_dis data determination in principle is a very efficient and simple technique to entirely specify unknown damping capacities of materials.

Unveiling structure-activity relationships of proanthocyanidins with dentin collagen

OBJECTIVE

To elucidate the structure-activity relationships (SARs) of proanthocyanidins (PACs) with type I collagen using sixteen chemically defined PACs with degree of polymerization (DP) 2-6.

METHODS

Under a dentin model, the biomimicry of PACs with type I collagen was investigated by dynamic mechanical analysis (DMA) and infrared spectroscopy. The dentin matrix was modified with PACs from Pinus massoniana [monomers (Mon-1 and Mon-2), dimers (Dim-1-Dim-4), trimers (Tri-1-Tri-4), tetramers (Tet-1-Tet-5), and hexamer (Hex-1)]. A strain sweep method in a 3-point bending submersion clamp was used to assess the viscoelastic properties [storage (E'), loss (E"), and complex moduli (E*) and tan δ] of the dentin matrix before and after biomodification. Biochemical analysis of the dentin matrix was assessed with FTIR spectroscopy. Data were statistically analyzed using one-way ANOVA and post-hoc tests (α = 0.05).

RESULTS

DP had a significant effect on modified dentin moduli (tetramers ≈ trimers > hexamers ≈ dimers > monomers ≈ control, p < 0.001). Trimers and tetramers yielded 6- to 8-fold increase in the mechanical properties of modified dentin and induced conformational changes to the secondary structure of collagen. Modifications to the tertiary structure of collagen was shown in all PAC modified-dentin matrices.

SIGNIFICANCE

Findings establish three key SARs: (i) increasing DP generally enhances biomimicry potential of PACs in modulating the mechanical and chemical properties of dentin (ii) the secondary structure of dentin collagen is affected by the position of B-type inter-flavanyl linkages (4β → 6 and 4β → 8); and (iii) the terminal monomeric flavan-3-ol unit plays a modulatory role in the viscoelasticity of dentin.

Comparison of dynamic mechanical properties of dentin between deciduous and permanent teeth

Purpose: Even though differences between deciduous and permanent dentin have been widely studied, their dynamic mechanical behavior has never been compared. The objective of the present study was to quantify the differences between deciduous and permanent dentin under cyclic mechanical loading, which is similar to masticatory stress.Materials and Methods: Deciduous and permanent teeth, respectively from children (9 ~ 12 years old) and young people (18 ~ 25 years old), were wet-sectioned perpendicular to the longitudinal axis and the central specimens of coronal dentin were evaluated by nanoscopic dynamic mechanical analysis (nanoDMA).Results: The average storage, loss, and complex moduli, as well as the hardness of deciduous dentin were significantly (p < 0.05) lower than those of permanent dentin. Moreover, the tan δ value of permanent dentin was significantly (p < 0.05) lower than that of deciduous dentin across the loading frequency range, indicating that viscoelastic behavior and loss of elastic energy were significantly reduced in the stiffer permanent dentin. All the nanoDMA responses showed a significant influence of the dynamic loading frequency (p < 0.05): Both deciduous and permanent dentin showed reduced viscoelasticty with increased loading frequencies.Conclusions: Compared with deciduous dentin, permanent dentin exhibits higher stiffness with reduced energy loss during deformation, and therefore superior mechanical characteristics for the mastication process.

Comparative Study of Technologies for Tubule Occlusion and Treatment of Dentin Hypersensitivity

This study aimed to evaluate the occluding/remineralization performance and resistance to acid attacks of the mineralization layer formed by a tooth-desensitizing gel containing amorphous calcium magnesium phosphate (ACMP) particles and compare it to six other desensitizing products available on the market. Similar comprehensive studies are few and there is especially a lack of studies that are up to date. A dentin-disc model was used for in vitro evaluation of the desensitizing toothpastes/gels. Application of the products was performed twice daily for seven days. One set of specimens were evaluated using scanning electron microscopy (SEM) directly after the final treatment and another set was evaluated after an acid challenge, exposing specimens to 2 wt% citric acid. The ACMP desensitizing gel was the only product resulting in complete occlusion by the formation of mineralized material on the dentin surface and inside the tubules. Particle deposition was dominant after treatment with the other desensitizing products, with little or no mineralization, resulting in partial occlusion only. Sensodyne Repair & Protect and Oral-B Pro-Expert showed the highest resistance toward acid attacks. Material inside the tubules remained relatively unaffected by acid attacks in all specimens. The results in this study indicated a great variability among the occluding agents in terms of occlusion and acid resistance of the mineralization layer. The high degree of occlusion and intra-tubular mineralization that could mitigate the effect of acid solubilization indicate that the ACMP desensitizing gel may be a superior option for the treatment of dentin hypersensitivity.

The existence of butterfly effect and its impact on the dentinal microhardness and crack formation after root canal instrumentation

To compare the microhardness and crack formation in root dentine presented with butterfly effect in lower premolars. Sixty mature lower premolars were selected and divided into the control and experimental groups. Teeth in the experimental group were instrumented up to size 30/.04. The roots were cut horizontally into twelve parts of 1-mm-thick cross-section and were numbered accordingly. They were divided into coronal, middle, and apical root sections. Sections were then viewed under a microscope to determine the presence of butterfly effect and subsequently scored. 8 teeth from both control and experimental groups with the highest and lowest score were selected. Crack formation was inspected and classified into four different types of cracks. Microhardness test was performed using a Vickers hardness test. Higher frequency of butterfly effect was found in the apical root section and root dentine with butterfly effect were harder mesiodistally. The middle and apical root sections with butterfly effect were harder than the coronal section. No significant difference of dentine hardness between the control and experimental groups. Cracks only occurred in the experimental group and presented in buccolingual direction with a higher rate of Type 1 and Type 2 cracks. Prevalence of butterfly effect in lower premolars increased from coronal to apical with increased hardness mesiodistally. More buccolingual cracks were found in radicular dentine with butterfly effect and most of them exhibited Type 1 and Type 2 cracks. Roots of lower premolar with butterfly effect may be susceptible to a higher rate of vertical root fracture in buccolingual direction, especially after root canal treatment. Thus, special attention should be given not to overload instruments during root canal preparation.

Aging and Senescence of Dental Pulp and Hard Tissues of the Tooth

The ability to consume a meal using one's own teeth influences an individual's quality of life. In today's global aging society, studying the biological changes in aging teeth is important to address this issue. A tooth includes three hard tissues (enamel, dentin, and cementum) and a soft tissue (dental pulp). With advancing age, these tissues become senescent; each tissue exhibits a unique senescent pattern. This review discusses the structural alterations of hard tissues, as well as the molecular and physiological changes in dental pulp cells and dental pulp stem cells during human aging. The significance of senescence in these cells remains unclear. Thus, there is a need to define the regulatory mechanisms of aging and senescence in these cells to aid in preservation of dental health.

Nanoscale chemical and mechanical heterogeneity of human dentin characterized by AFM-IR and bimodal AFM

•

AFM-IR technique was used to detect the chemical heterogeneity of human dentin for the first time.

•

The heterogeneity of mechanical properties of human dentin was explored by AFM AM-FM technique.

•

A band at 1336 cm⁻¹ assigned to S Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]>O stretching vibrations was found only in peritubular dentin.

•

Peritubular dentin had a higher Young’s modulus (32.25 ± 4.67 GPa) than intertubular dentin.

•

AFM-IR and AFM AM-FM are useful for understanding the mineral deposition mechanisms of dentin.

Human dentin, as an important calcified tissue in the body, plays significant roles in withstanding masticatory forces and has a complex hierarchical organization. Understanding the composition and ultrastructure of dentin is critical for elucidating mechanisms of biomineralization under healthy and pathological states. Here, atomic force microscope infrared spectroscopy (AFM-IR) and AFM-based amplitude modulation-frequency modulation (AM-FM) techniques were utilized to detect the heterogeneity in chemical composition and mechanical properties between peritubular and intertubular dentin at the nanoscale. AFM-IR spectra collected from peritubular and intertubular dentin contained similar vibrational bands in the amide regions (I, II and III), suggesting that collagen may exist in both structures. A distinctive band at 1336 cm⁻¹ indicative of SO stretching vibrations was detected only in peritubular dentin. AFM-IR imaging showed an uneven distribution of chemical components at different locations, confirming the heterogeneity of dentin. The Young’s modulus of peritubular dentin was higher, and was associated to a higher mineral content. This study demonstrated distinctive chemical and mechanical properties of peritubular dentin, implying the different development and mineralization processes between peritubular and intertubular dentin. AFM-IR is useful to provide compositional information on the heterogeneity of human dentin, helping to understand the mineral deposition mechanisms of dentin.

Micro-shear bond strength of adhesives with different degrees of acidity: Effect on sound and artificially hypermineralized dentin

This study evaluates the bond strength of four self-etching adhesive systems with different acidity levels in normal and artificially hypermineralized dentin substrate. Healthy human molars were divided into groups: normal dentin-N (n = 36) and artificially hypermineralized dentin-H (n = 36). Self-etching adhesive systems Clearfil S³ Bond (n = 9), Optibond All in One (n = 9), Clearfil SE Bond (n = 9), and Adhese (n = 9) were used for both the N and H groups. Transparent cylindrical matrices were positioned on the treated dentin surfaces, filled with composite resin, and light-cured for 40 s. After the transparent cylindrical matrices were removed, the specimens were stored for 24 hr in a humid environment at 37°C and were subjected to a micro-shear bond strength test. For each group, a specimen was prepared and evaluated in scanning electron microscope for adhesive interface observation. Normality was confirmed and the two-way analysis of variance and Games-Howell post-tests were conducted (α = .05). The data demonstrated an interaction between the adhesive system and type of dentin substrate (p < .01). For normal dentin, all adhesive systems assessed were adequate; however, in the hypermineralized dentin, the Clearfil SE Bond two-step self-etching adhesive system with mild pH presented the highest immediate bond strength. There was a predominance of adhesive failures for all adhesive systems in the different dentin substrates evaluated. It was concluded that the self-etching adhesive systems evaluated were efficient for both substrates, and for the hypermineralized dentin, the Clearfil SE Bond presented a higher bond strength value.

Comparison of in vitro erosion protocols in bovine teeth to simulate natural erosion lesion: analysis of mechanical properties and surface gloss

OBJECTIVE

The aim of this study was to compare two in vitro erosion protocols, in which one simulates in vivo conditions experienced by patients with gastroesophageal disorders or bulimia (HCl-pepsin protocol), and the other simulates the diet of an individual who consumes a high volume of erosive beverages (citric acid protocol). In addition, the mechanical properties and surface gloss of eroded human dentin were compared with those of sound human dentin.

MATERIALS AND METHODS

Blocks of cervical dentin were used: sound human dentin (n=10), human dentin with erosive lesions (n=10), and bovine dentin (n=30). Twenty bovine blocks were subjected to either of two erosion protocols (n=10/protocol). In the first protocol, samples were demineralized using HCl-pepsin solution, then treated with trypsin solution. In the second protocol, samples were demineralized with 2% citric acid. Toothbrushing was performed in both protocols using a toothbrushing machine (15 s with a 150 g load). Ten bovine dentin blocks were not subjected to any erosive treatment. All samples of bovine and human dentin were analyzed to obtain Martens hardness values (MH), elastic modulus (Eit*) and surface gloss. One-way ANOVA and Tukey's test were performed to analyze the data (α=0.05).

RESULTS

Sound human and eroded human dentin groups showed similar MH and Eit* values (p>0.05); however, sound human dentin showed a higher surface gloss value when compared to eroded human dentin (p<0.05). Sound bovine dentin and HCl-pepsin-treated bovine dentin treatments resulted in similar values for both MH and Eit* (p>0.05), but HCl-pepsin-treated bovine dentin and citric acid-treated bovine dentin resulted in lower surface gloss than sound bovine dentin (p<0.05).

CONCLUSIONS

The HCl-pepsin protocol modified bovine dentin properties that could be similar to those that occur on human dentin surfaces with erosive lesions.

Stored potential energy increases and elastic properties alterations are produced after restoring dentin with Zn-containing amalgams

The aim of this research was to ascertain the mechanical and chemical behavior of sound and caries-affected dentin (CAD), after the placement of Zn-free vs containing amalgam restorations. Peritubular and intertubular dentin were evaluated using, a) nanoindenter in scanning mode; the load and displacement responses were used to perform the nano-Dynamic mechanical analysis and to estimate the complex (E * ) and storage modulus (E'); b) Raman spectroscopy was used to describe the hierarchical cluster analysis (HCA). Assessments were performed before restoration placement and after restoring, and after 3 months of storage with thermocycling (100,000cy/5 °C and 55 °C). When CAD was treated with Zn-containing restorations, differences between E * and E' at both peritubular and intertubular dentin augmented, with energy concentration and production of implications in the mechanical performance of the restored teeth. E * and E' were very low at intratubular dentin of CAD restored with Zn-containing restorations. The relative presence of minerals, the phosphate crystallinity and the crosslinking of collagen increased their values at both types of dentin (peritubular and intertubular) when CAD was treated with Zn-containing restorations. The nature and secondary structure of collagen improved in CAD treated with Zn-containing amalgams. Different levels of dentin remineralization were revealed by hierarchical cluster analysis.

Assessing bone quality through mechanical properties in postmenopausal trabecular bone

BACKGROUND

The inner structure of trabecular bone is a result of structural optimization provided by remodeling processes. Changes in hormonal status related to menopause cause bone tissue loss and micro-architectural deterioration with a consequent susceptibility to fracture. Accumulation of micro-damage in bone, as a function of the rate of production and rate of repair, underlies the development of stress fractures, increasing fragility associated to age and osteoporosis, especially in transmenopausal women.

PATIENTS AND METHODS

Quasi-static and nano-dynamic mechanical characterization were undertaken in trabecular bone from femoral neck biopsies of postmenopausal women. AFM (Atomic Force Microscopy) complementary studies were performed to determine nano-roughness (SRa) and the fibrils width of collagen. Nanoindentations were used to quantify transmenopausal changes in intrinsic mechanical properties of trabecular bone: hardness (Hi), modulus of Young (Ei), complex modulus (E*), tan delta (δ), storage modulus (E') and loss modulus (E").

RESULTS

As result of the quasi-static measurements, 0.149 (0.036) GPa and 2.95 (0.73) GPa of Hi and Ei were obtained, respectively. As result of the nano-dynamic measurements, 17.94 (3.15), 0.62 (0.10), 13.79 (3.21 and 6.39 (1.28) GPa of E*, tan (δ), E' and E" were achieved, respectively. 101.07 SRa and 831.28 nm of fibrils width were additionally obtained.

CONCLUSIONS

This study poses a first approach to the measurement of bone quality in postmenopausal trabecular bone by combining quasi-static, nano-DMA analysis and tribology of dentin surface through AFM characterization.

Deformation behaviour of aged coronal dentin

OBJECTIVE

This study aimed to identify the changes in the time-dependent deformation response of coronal dentin with ageing and its relationship with changes in chemical composition.

BACKGROUND

The structural behaviour of dentin with ageing is affected by changes in the density and diameter of its dentinal tubules (ie porosity), as well as changes in chemical composition throughout the tooth. However, little is known about the time-dependent deformation behaviour of aged dentin and the importance of its hierarchical structure and variations in chemical composition.

MATERIALS AND METHODS

The spherical indentation response of aged coronal dentin was analysed in the outer, middle and inner regions, and its time-dependent deformation response was modelled in terms of its microstructure and chemical composition using a model recently proposed for young dentin.

RESULTS

The viscous deformation behaviour of aged dentin followed a power-law response with a decrease in the stress exponent when compared to young dentin. These results can be explained by cross-linking of the collagen present in the tissue.

CONCLUSION

A decrease in the deformation ability of aged dentin was found. This behaviour could be a result of a dissolution process and reprecipitation of the minerals present in intertubular dentin into the dentinal tubules.

Nanostructure in the trabecular bone of postmenopausal women: Mechanical and chemical analysis

The possibility of diagnosis and prediction of multiple disorders in trabecular bone through nano-biomechanics and chemical analysis are summarized. Improvements to the understating of the compositional contributors of bone mineral and organic components to mechanical competence are crucial. Viscoelastic properties and Raman characterization have been used to evaluate possible alterations of the trabecular bone associated with aging, disease, or injury. In this study, the trabecular bone of postmenopausal women has been analyzed throughout. (a) Nanomechanical characterization, by using nano-DMA: complex modulus, tan δ, loss modulus (E'), and storage modulus (E'); and (b) Raman analysis: relative presence of minerals, carbonate-to-phosphate ratio (both from the mineral components), the crosslinking and nature/secondary structure of collagen (both from the organic components). Complementary nano-morphological studies were done assessing roughness (SRa) and collagen fibrils width, on this trabecular bone. A general idea of the behavior of the viscoelastic performance can be obtained by the Tan δ (E″/E'), that achieved 0.98GPa of damping. 249nm and 0.898μm of SRa roughness and fibrils width were obtained, respectively. The relative presence of minerals, the carbonate-to-phosphate ratio, the crosslinking and the nature/secondary structure of collagen, between 700 and 1700cm^-1, were also obtained, in order to propose a study protocol for trabecular bone characterization.

The peritubular reinforcement effect of porous dentine microstructure

In the current study, we evaluate the equivalent stiffness of peritubular reinforcement effect (PRE) of porous dentine optimized by the thickness of peritubular dentine (PTD). Few studies to date have evaluated or quantitated the effect of PRE on composite dentine. The miscrostructure of porous dentine is captured by scanning electron microscope images, and then finite element modeling is used to quantitate the deformation and stiffness of the porous dentine structure. By optimizing the radius of PTD and dentine tubule (DT), the proposed FE model is able to demonstrate the effect of peritubular reinforcement on porous dentine stiffness. It is concluded that the dentinal equivalent stiffness is reduced and degraded with the increase of the radius of DT (i.e., porosity) in the certain ratio value of E_p/E_i and certain radius of PTD, where E_p is the PTD modulus and E_i is the intertubular dentine modulus. So in order to ensure the whole dentinal equivalent stiffness is not loss, the porosity should get some value while the E_p/E_i is certain. Thus, PTD prevents the stress concentration around DTs and reduces the risk of DTs failure. Mechanically, the overall role of PTD appears to enhance the stiffness of the dentine composite structure. These results provide some new and significant insights into the biological evolution of the optimal design for the porous dentine microstructure. These findings on the biological microstructure design of dentine materials are applicable to other engineering structural designs aimed at increasing the overall structural strength.

Extrafibrillar collagen demineralization-based chelate-and-rinse technique bridges the gap between wet and dry dentin bonding

Limitations associated with wet-bonding led to the recent development of a selective demineralization strategy in which dentin was etched with a reduced concentration of phosphoric acid to create exclusive extrafibrillar demineralization of the collagen matrix. However, the use of acidic conditioners removes calcium via diffusion of very small hydronium ions into the intrafibrillar collagen water compartments. This defeats the purpose of limiting the conditioner to the extrafibrillar space to create a collagen matrix containing only intrafibrillar minerals to prevent collapse of the collagen matrix. The present work examined the use of polymeric chelators (the sodium salt of polyacrylic acid) of different molecular weights to selectively demineralize extrafibrillar dentin. These polymeric chelators exhibit different affinities for calcium ions (isothermal titration calorimetry), penetrated intrafibrillar dentin collagen to different extents based on their molecular sizes (modified size-exclusion chromatography), and preserve the dynamic mechanical properties of mineralized dentin more favorably compared with completely demineralized phosphoric acid-etched dentin (nanoscopical dynamic mechanical analysis). Scanning and transmission electron microscopy provided evidence for retention of intrafibrillar minerals in dentin surfaces conditioned with polymeric chelators. Microtensile bond strengths to wet-bonded and dry-bonded dentin conditioned with these polymeric chelators showed that the use of sodium salts of polyacrylic acid for chelating dentin prior to bonding did not result in significant decline in resin-dentin bond strength. Taken together, the findings led to the conclusion that a chelate-and-rinse conditioning technique based on extrafibrillar collagen demineralization bridges the gap between wet and dry dentin bonding.

STATEMENT OF SIGNIFICANCE

The chelate-and-rinse dental adhesive bonding concept differentiates from previous research in that it is based on the size-exclusion characteristics of fibrillar collagen; molecules larger than 40kDa are prevented from accessing the intrafibrillar water compartments of the collagen fibrils. Using this chelate-and-rinse extrafibrillar calcium chelation concept, collagen fibrils with retained intrafibrillar minerals will not collapse upon air-drying. This enables adhesive infiltration into the mineral-depleted extrafibrillar spaces without relying on wet-bonding. By bridging the gap between wet and dry dentine bonding, the chelate-and-rinse concept introduces additional insight to the field by preventing exposure of endogenous proteases via preservation of the intrafibrillar minerals within a collagen matrix. If successfully validated, this should help prevent degradation of resin-dentine bonds by collagenolytic enzymes.

Mechanical loading influences the viscoelastic performance of the resin-carious dentin complex

The aim of this study was to evaluate the changes in the mechanical behavior and bonding capability of Zn-doped resin-infiltrated caries-affected dentin interfaces. Dentin surfaces were treated with 37% phosphoric acid (PA) followed by application of a dentin adhesive, single bond (SB) (PA+SB) or by 0.5 M ethylenediaminetetraacetic acid (EDTA) followed by SB (EDTA+SB). ZnO microparticles of 10 wt. % or 2 wt. % ZnCl₂ was added into SB, resulting in the following groups: PA+SB, PA+SB-ZnO, PA+SB-ZnCl₂, EDTA+SB, EDTA+SB-ZnO, EDTA+SB-ZnCl₂. Bonded interfaces were stored for 24 h, and tested or submitted to mechanical loading. Microtensile bond strength was assessed. Debonded surfaces were evaluated by scanning electron microscopy and elemental analysis. The hybrid layer, bottom of the hybrid layer, and peritubular and intertubular dentin were evaluated using a nanoindenter. The load/displacement responses were used for the nanodynamic mechanical analysis III to estimate complex modulus, tan delta, loss modulus, and storage modulus. The modulus mapping was obtained by imposing a quasistatic force setpoint to which a sinusoidal force was superimposed. Atomic force microscopy imaging was performed. Load cycling decreased the tan delta at the PA+SB-ZnCl₂ and EDTA+SB-ZnO interfaces. Tan delta was also diminished at peritubular dentin when PA+SB-ZnO was used, hindering the dissipation of energy throughout these structures. Tan delta increased at the interface after using EDTA+SB-ZnCl₂, lowering the energy for recoil or failure. After load cycling, loss moduli at the interface decreased when using ZnCl₂ as doping agent, increasing the risk of fracture; but when using ZnO, loss moduli was dissimilarly affected if dentin was EDTA-treated. The border between intertubular and peritubular dentin attained the highest discrepancy in values of viscoelastic properties, meaning a risk for cracking and breakdown of the resin-dentin interface. PA used on dentin provoked differences in complex and storage modulus values at the intertubular and peritubular structures, and these differences were higher than when EDTA was employed. In these cases, the long-term performance of the restorative interface will be impaired.

Influence of root dentin treatment on the push-out bond strength of fiber posts

The aim of the present study was to assess whether different dentin conditioning protocols with different acids [phosphoric acid, ethylene diamine tetra acetic acid (EDTA), and polyacrylic acid (PAA)] influence the bond strength of fiber posts along the radicular depth when luted with self-adhesive resin cement. Twenty single-rooted teeth were randomly divided into four experimental groups (n = 5) according to dentin treatment: Group 1: no treatment; Group 2: etching with 35 % phosphoric acid for 10 s; Group 3: 17 % EDTA application for 60 s; and Group 4: conditioning with 25 % PAA for 30 s. RelyX Fiber Posts were luted with the self-adhesive resin cement RelyX Unicem 2 Automix (3M ESPE). Roots were transversally sectioned into nine 1-mm thick specimens, three corresponding to each root third and a push-out test was performed. Data were analyzed by two-way ANOVA and Tukey test (p < 0.05). Failure mode was determined and specimens with representative failures for each group were observed under scanning electron microscopy. According to the results, dentin treatment influenced the bond strength (p < 0.001), whereas the root third did not (p > 0.05). Fiber posts luted after treating dentin with phosphoric acid, and PAA exhibited the highest push-out bond strength values, while the lowest were obtained after EDTA application. Intermediate results were obtained when dentin was not conditioned. In conclusion, the bond strength of the self-adhesive resin cement RelyX Unicem 2 improves when root dentin is treated with 35 % phosphoric acid or 25 % PAA, before fiber posts luting irrespective of the root depth.

Dynamic Response of a Single Interface in a Biocomposite Structure

Biological composite materials are known to be tough, stiff, stable, viscoelastic bodies, that can creep, recover, absorb energy, and filter vibrations. Their multifunctionality is associated with their architectures, which often consist of mineral units surrounded by organic interfaces that play a key role in the performance of the entire composite. However, the confinement and small dimensions of these organic interfaces pose a challenge in measuring their physical properties by direct methods. We propose an indirect, experimental-analytical framework by which to probe the elastic and viscoelastic behavior of an individual interface. We demonstrate this framework on thin organic interfaces in the shell Pinna nobilis, and discuss its possible uses in various other micro- and nanoscale composite systems.

Nanoscopic dynamic mechanical analysis of resin-infiltrated dentine, under in vitro chewing and bruxism events

The aim of this study was to evaluate the induced changes in mechanical behavior and bonding capability of resin-infiltrated dentine interfaces, after application of mechanical stimuli. Dentine surfaces were subjected to partial demineralization through 37% phosphoric acid etching followed by the application of an etch-and-rinse dentine adhesive, Single Bond (3M/ESPE). Bonded interfaces were stored in simulated body fluid during 24h, and then tested or submitted to the mechanical loading challenge. Different loading waveforms were applied: No cycling (I), 24h cycled in sine (II) or square (III) waves, sustained loading held for 24h (IV) or sustained loading held for 72h (V). Microtensile bond strength (MTBS) was assessed for the different groups. Debonded dentine surfaces were studied by field emission scanning electron microscopy (FESEM). At the resin-dentine interface, both the hybrid layer (HL) and the bottom of the hybrid layer (BHL), and both peritubular and intertubular were evaluated using a nanoindenter in scanning mode. The load and displacement responses were used to perform the nano-Dynamic Mechanical analysis and to estimate the complex and storage modulus. Dye assisted Confocal Microscopy Evaluation was used to assess sealing ability. Load cycling increased the percentage of adhesive failures in all groups. Specimens load cycled in held 24h attained the highest complex and storage moduli at HL and BHL. The storage modulus was maximum in specimens load cycled in held 24h at peritubular dentine, and the lowest values were attained at intertubular dentine. The storage modulus increased in all mechanical tests, at peritubular dentine. An absence of micropermeability and nanoleakage after loading in sine and square waveforms were encountered. Porosity of the resin-dentine interface was observed when specimens were load cycled in held 72h. Areas of combined sealing and permeability were discovered at the interface of specimens load cycled in held 24h. Crack-bridging images appeared in samples load cycled with sine waveform, after FESEM examination.