Contribution of computational model for assessment of heart tissue local stress caused by suture in LVAD implantation

Numerical Methodology to Evaluate Trackability and Pushability of PTCA Balloon Catheter

PURPOSE

During percutaneous coronary intervention (PCI), the ability to navigate a catheter without causing injury to the vessel and damage to the device is crucial outcome of the procedure. This study aimed to develop a numerical model to analyse the percutaneous transluminal coronary angioplasty (PTCA) catheter navigation in coronary vessels.

METHODS

Trackability and pushability are two major parameters used to characterize the navigation of PTCA balloon catheters, and they are influenced by vessel tortuosity, contact interactions and catheter design. In the current study, finite element analysis model is presented to evaluate trackability and pushability considering two different vessel geometries. Impact of contact interactions among catheter, guidewire, and vessel were studied to validate the numerical model with in vitro test data. Further, a parametric study was conducted to understand the influence of distal shaft, and proximal shaft outer diameter.

RESULTS

Obtained results suggest that contact interaction and co-efficient of friction between guidewire and catheter are critical parameters to obtain numerical results comparable to experimental data. Results from the parametric study predicted strong positive correlation of distal shaft diameter on pushability, and weak correlation on trackability force. Furthermore, parametric variation in proximal shaft diameter has strong positive correlation on trackability force and strong negative correlation on pushability.

CONCLUSION

Numerical methodology presented in this study is a preliminary attempt to simulate the behavior of PTCA balloon catheter navigation. This methodology will be helpful in the design and optimization of PTCA balloon catheter and similar devices with improved deliverability.

Microstructural deformation observed by Mueller polarimetry during traction assay on myocardium samples

Despite recent advances, the myocardial microstructure remains imperfectly understood. In particular, bundles of cardiomyocytes have been observed but their three-dimensional organisation remains debated and the associated mechanical consequences unknown. One of the major challenges remains to perform multiscale observations of the mechanical response of the heart wall. For this purpose, in this study, a full-field Mueller polarimetric imager (MPI) was combined, for the first time, with an in-situ traction device. The full-field MPI enables to obtain a macroscopic image of the explored tissue, while providing detailed information about its structure on a microscopic scale. Specifically it exploits the polarization of the light to determine various biophysical quantities related to the tissue scattering or anisotropy properties. Combined with a mechanical traction device, the full-field MPI allows to measure the evolution of such biophysical quantities during tissue stretch. We observe separation lines on the tissue, which are associated with a fast variation of the fiber orientation, and have the size of cardiomyocyte bundles. Thus, we hypothesize that these lines are the perimysium, the collagen layer surrounding these bundles. During the mechanical traction, we observe two mechanisms simultaneously. On one hand, the azimuth shows an affine behavior, meaning the orientation changes according to the tissue deformation, and showing coherence in the tissue. On the other hand, the separation lines appear to be resistant in shear and compression but weak against traction, with a forming of gaps in the tissue.

FRESH 3D Bioprinting a Full-Size Model of the Human Heart

Recent advances in embedded three-dimensional (3D) bioprinting have expanded the design space for fabricating geometrically complex tissue scaffolds using hydrogels with mechanical properties comparable to native tissues and organs in the human body. The advantage of approaches such as Freeform Reversible Embedding of Suspended Hydrogels (FRESH) printing is the ability to embed soft biomaterials in a thermoreversible support bath at sizes ranging from a few millimeters to centimeters. In this study, we were able to expand this printable size range by FRESH bioprinting a full-size model of an adult human heart from patient-derived magnetic resonance imaging (MRI) data sets. We used alginate as the printing biomaterial to mimic the elastic modulus of cardiac tissue. In addition to achieving high print fidelity on a low-cost printer platform, FRESH-printed alginate proved to create mechanically tunable and suturable models. This demonstrates that large-scale 3D bioprinting of soft hydrogels is possible using FRESH and that cardiac tissue constructs can be produced with potential future applications in surgical training and planning.