Mechanical behavior of in vivo degraded second generation resorbable magnesium scaffolds (RMS)

In vivo chronic scaffolding force of a resorbable magnesium scaffold

The aim of this study is to qualitatively characterize the in vivo chronic scaffolding force of the Magmaris® Resorbable Magnesium Scaffold (RMS). This important parameter of scaffolds must be balanced between sufficient radial support during the healing period of the vessel and avoidance of long-term vessel caging. A finite element model was established using preclinical animal data and used to predict the device diameter and scaffolding force up to 90 days after implantation. To account for scaffold resorption, it included backbone degradation as well as formation of discontinuities as observed in vivo. The predictions of the model regarding acute recoil and chronic development of the device diameter were in good agreement with the preclinical data, supporting the validity of the model. It was found that after 28 and 90 days, the Magmaris® RMS retained 90 % and 47 % of its initial scaffolding force, respectively. The reduction in scaffolding force was mainly driven by discontinuities in the meandering segments. Finite element analysis combined with preclinical data is a reliable method to characterize the chronic scaffolding force.

A word of caution: Early failure of Magmaris® bioresorbable stent after pulmonary artery stenting

Bioresorbable scaffolds (BRS) have been advocated as the fourth revolution in interventional cardiology medical devices with promising technology to improve the treatment of coronary artery disease with an event-free future. We describe the first reported use and early collapse of the Magmaris® Resorbable Magnesium Scaffold (RMS) stent (BIOTRONIK AG, Switzerland) to relieve left pulmonary artery severe stenosis in a newborn after the Norwood procedure. The stent collapse was detected 2 weeks after implantation and urgently treated with a balloon-expandable stent. This complication raises the alarm about the need to keep implanted RMS under scrutiny. The possibility of faster scaffold resorption in small babies or lack of sufficient radial force of RMS to resist acute vessel recoil has led to ineffective relief of branch pulmonary artery stenosis and failure to enable a safe short-term bridge to Stage II palliation.

Additive Manufactured Magnesium-Based Scaffolds for Tissue Engineering

Additive manufacturing (AM) is an important technology that led to a high evolution in the manufacture of personalized implants adapted to the anatomical requirements of patients. Due to a worldwide graft shortage, synthetic scaffolds must be developed. Regarding this aspect, biodegradable materials such as magnesium and its alloys are a possible solution because the second surgery for implant removal is eliminated. Magnesium (Mg) exhibits mechanical properties, which are similar to human bone, biodegradability in human fluids, high biocompatibility, and increased ability to stimulate new bone formation. A current research trend consists of Mg-based scaffold design and manufacture using AM technologies. This review presents the importance of biodegradable implants in treating bone defects, the most used AM methods to produce Mg scaffolds based on powder metallurgy, AM-manufactured implants properties, and in vitro and in vivo analysis. Scaffold properties such as biodegradation, densification, mechanical properties, microstructure, and biocompatibility are presented with examples extracted from the recent literature. The challenges for AM-produced Mg implants by taking into account the available literature are also discussed.

BIOSOLVE-IV-registry: Safety and performance of the Magmaris scaffold: 12-month outcomes of the first cohort of 1,075 patients

OBJECTIVES

We aimed to assess the safety and performance of the Magmaris sirolimus-eluting bioresorbable magnesium scaffold in a large patient population.

BACKGROUND

Magmaris has shown good outcomes in small-sized controlled trials, but further data are needed to confirm its usability, safety, and performance.

METHODS

BIOSOLVE-IV is an international, single arm, multicenter registry including patients with a maximum of two single de novo lesions. Follow-up is scheduled up to 5 years; the primary outcome is target lesion failure (TLF) at 12 months.

RESULTS

A total of 1,075 patients with 1,121 lesions were enrolled. Mean patient age was 61.3 ± 10.5 years and 19.2% (n = 206) presented with non-ST-elevation myocardial infarction (NSTEMI). Lesions were 3.2 ± 0.3 mm in diameter and 14.9 ± 4.2 mm long; 5.1% (n = 57) were bifurcation lesions. Device success was 97.3% (n = 1,129) and procedure success 98.9% (n = 1,063). The Kaplan-Meier estimate of TLF at 12 months was 4.3% [95% confidence interval, CI: 3.2, 5.7] consisting of 3.9% target lesion revascularizations, 0.2% cardiac death, and 1.1% target-vessel myocardial infarction. Definite/probable scaffold thrombosis occurred in five patients (0.5% [95% CI: 0.2, 1.1]), thereof four after early discontinuation of antiplatelet/anticoagulation therapy.

CONCLUSION

BIOSOLVE-IV confirms the safety and performance of the Magmaris scaffold in a large population with excellent device and procedure success and a very good safety profile up to 12 months in a low-risk population.

Acute treatment of critical vascular stenoses with a bioabsorbable magnesium scaffold in infants with CHDs

BACKGROUND

Post-operative severe vascular stenosis and proliferating endothelial tissue lead to severe circulatory disorders and impair organ perfusion. Bioabsorbable magnesium scaffolds may help to overcome these obstructions without leaving obstructing stent material. We analyse their role in the treatment of vascular stenosis in infants.

METHODS

Since 2016, 15 magnesium scaffolds with a diameter of 3.5 mm were implanted in 9 patients aged 15 days to 7.6 years. Eight scaffolds were implanted in pulmonary venous restenoses, five in pulmonary arterial stenosis including one in-stent stenosis, one into a stenotic brachiocephalic artery, and one in a recurrent innominate vein thrombosis.

RESULTS

All patients clinically improved after the implantation of a scaffold. The magnesium scaffolds lost integrity after 30-48 days (mean 42 days). The innominate vein thrombosed early, while all other vessels remained open. Two patients died after 1.3 and 14 weeks not related to the scaffolds. Five patients needed further balloon dilations or stent implantations after the scaffold had fractured. At first recatheterisation after in mean 2.5 months, the mean minimum/maximum diameter in relation to the scaffold's original diameter was 89%/99% in the arterial implantations (n = 6) and 66%/77% in the pulmonary venous implantations.

CONCLUSIONS

The magnesium scaffolds can be used as a bridging solution to treat severe vascular stenosis in different locations. Restenosis can occur after degradation and make further interventions necessary, but neither vessel growth nor further interventions are hindered by stent material. Larger diameters may improve therapeutic options.