Effect of Er:YAG laser irradiation and chitosan biomodification on the stability of resin/demineralized bovine dentin bond

Effect of chitosan and CMCS on dentin after Er:YAG laser irradiation: shear bond strength and surface morphology analysis

OBJECTIVES

The aim of the present study was to evaluate the effect of chitosan and carboxymethyl chitosan (CMCS) on dentin surface morphology and bonding strength after irradiation of Er:YAG laser.

METHODS

Eighty-four laser-irradiated dentin samples were randomly distributed into three groups (n = 28/group) according to different surface conditioning process: deionized water for 60s; 1wt% chitosan for 60s; or 1wt% CMCS for 60s. Two specimens from each group were subjected to TEM analysis to confirm the presence of extrafibrillar demineralization on dentin fibrils. Two specimens from each group were subjected to morphological analysis by SEM. Seventy-two specimens (n = 24/group) were prepared, with a composite resin cone adhered to the dentin surface, and were then randomly assigned to one of two aging processes: storage in deionized water for 24 h or a thermocycling stimulation. The shear bond strength of laser-irradiated dentin to the resin composite was determined by a universal testing machine. Data acquired in the shear bond strength test was analyzed by one-way ANOVA with the Tukey honestly significant difference post hoc test and Independent Samples t-test (α = 0.05).

RESULTS

CMCS group presented demineralized zone and a relatively smooth dentin surface morphology. CMCS group had significantly higher SBS value (6.08 ± 2.12) without aging (p < 0.05). After thermal cycling, both chitosan (5.26 ± 2.30) and CMCS group (5.82 ± 1.90) presented higher bonding strength compared to control group (3.19 ± 1.32) (p < 0.05). Chitosan and CMCS group preserved the bonding strength after aging process (p > 0.05).

CONCLUSIONS

CMCS has the potential to be applied in conjunction with Er:YAG laser in cavity preparation and resin restoration.

Er:YAG laser in selective caries removal and dentin treatment with chitosan: a randomized clinical trial in primary molars

This study evaluated the effect of chitosan on dentin treatment after selective removal of caries lesions with Er:YAG laser in reducing Streptococcus mutans, as well as its effect on the performed restorations. The sample consisted of children (aged 7 to 9 years) with active carious lesions and dentin cavitation located on the occlusal surface of deciduous molars. Eighty teeth were randomly distributed into 4 groups according to the caries removal method: Er:YAG laser (250 mJ/4 Hz) or bur and dentin surface treatment: 2.5% chitosan solution or distilled water. The bacterial load of caries-affected dentin was quantified by counting CFU/mg (n = 10). The teeth were restored and evaluated at 7 days, 6 months, and 12 months using modified USPHS criteria (n = 20). Microbiological data was analyzed by Mann-Whitney and clinical analyses were done using Kruskal-Wallis and Dunn test (α = 0.05). The results showed that the Er:YAG laser significantly reduced the amount of Streptococcus mutans (p = 0.0068). After dentin treatment with chitosan, there was a significant reduction in the amount of Streptococcus mutans for both removal methods (p = 0.0424). For the retention and secondary caries criteria, no significant differences were observed along the evaluated time (p > 0.05). The laser-treated group was rated "bravo" for discoloration (p = 0.0089) and marginal adaptation (p = 0.0003) after 6 and 12 months compared to baseline. The Er:YAG laser reduced the amount of Streptococcus mutans and the chitosan showed an additional antibacterial effect. After 1 year, the Er:YAG laser-prepared teeth, regardless of the dentin treatment, showed greater discoloration and marginal adaptation of the restorations.

Characterization, Antimicrobial Activity, and Antioxidant Efficacy of a Pomegranate Peel Solution Against Persistent Root Canal Pathogens

BACKGROUND

The limitations of dental irrigation solutions reinforce the need to explore novel bioactive compounds that are safer and biodegradable. This study aimed to prepare a 10% pomegranate peel solution (Punica granatum extract - PGE) and evaluate its antimicrobial and antioxidant effects for root canal treatment.

METHODS

Lyophilized extracts (1g/10 mL) from pomegranate peels were prepared, and the punicalagin content was assessed by ultra-performance liquid chromatography using pure punicalagin (standard). The antimicrobial activity was tested against common persistent root canal pathogens by the agar diffusion method, minimum inhibitory concentration (MIC), and minimum bactericidal/fungicide concentration (MCB/MFC). The antioxidant activity (%AA) was assessed by the DPPH radical scavenging method. Data were analyzed by ANOVA and Tukey's test (α = 0.05).

RESULTS

The total phenolic content of the PGEextract was 6.55 µg/mL. Differences were found among the inhibition zone of PGE (23.32 ± 3.65), 1% NaOCl (30.76 ± 4.73), and 50% ethanol (without inhibition) (p < 0.05). The MIC values of PGE ranged between 6.25 and 75 mg/ml, and PGE was effective against the tested pathogens. PGE had antioxidant potential (IC50 = 3.52 µg/mL); however, the mean values were inferior to that of the quercetin (positive control) (IC50 = 0.95 µg/mL). The DPPH scavenging effect (%AA) of PGE (70.98 ± 2.3) had no difference from the positive control (72.94 ± 2.1) (p = 0.253).

CONCLUSION

The PGE extract was successfully biosynthesized and exhibited antimicrobial and antioxidant activity, suggesting its potential use as an adjuvant therapy during root canal treatment.

In vitro antibacterial activity of green tea-loaded chitosan nanoparticles on caries-related microorganisms and dentin after Er:YAG laser caries removal

This study aimed to determine the inhibitory effects of green tea (Gt), EGCG, and nanoformulations containing chitosan (Nchi) and chitosan+green tea (Nchi+Gt) against Streptococcus mutans and Lactobacillus casei. In addition, the antibacterial effect of nanoformulations was evaluated directly on dentin after the selective removal of carious lesion. At first, the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against S. mutans and L. casei isolates were investigated. In parallel, dentin specimens were exposed to S. mutans to induce carious lesions. Soft dentin was selectively removed by Er:YAG laser (n=33) or bur (n=33). Remaining dentin was biomodified with Nchi (n=11) or Gt+Nchi (n=11). Control group (n=11) did not receive any treatment. Dentin scraps were collected at three time points. Microbiological analyses were conducted and evaluated by agar plate counts. Gt at 1:32 dilution inhibited S. mutans growth while 1:16 was efficient against L. casei. EGCG at 1:4 dilution completely inhibited S. mutans and L. casei growth. Independently of the association with Gt, Nchi completely inhibited S. mutans at 1:4 dilution. For L. casei, different concentrations of Nchi (1:32) and Nchi+Gt (1:8) were required to inhibit cell growth. After selective carious removal, viability of S. mutans decreased (p<0.001), without difference between bur and Er:YAG laser (p>0.05). Treatment with Nchi and Nchi+Gt did not influence the microbial load of S. mutans on dentin (p>0.05). Although variations in concentrations were noticed, all compounds showed antibacterial activity against S. mutans and L. casei. Both bur and Er:YAG laser have effectively removed soft dentin and reduced S. mutans counts. Nanoformulations did not promote any additional antibacterial effect in the remaining dentin.

Chitosan-induced biomodification on demineralized dentin to improve the adhesive interface

Objectives

Metalloproteinase-inhibiting agents, such as chitosan, can prevent collagen degradation in demineralized dental substrates, thereby improving the adhesive interface. This study evaluated the bond strength (BS) and chemical and morphological characterization of the adhesive interface after applying chitosan solution to demineralized dentin.

Materials and Methods

The 80 third molars were selected. Forty teeth underwent caries induction using the pH cycling method. The teeth were divided according to the treatment: distilled water (control) and 2.5% chitosan solution. The surfaces were restored using adhesive and composite resins. Half of the specimens in each group were aged, and the other half underwent immediate analyses. The teeth were sectioned and underwent the microtensile bond strength test (µTBS), and chemical and morphological analyses using energy-dispersive spectroscopy and scanning electron microscopy, respectively. Data analysis was performed using 3-way analysis of variance.

Results

For µTBS, sound dentin was superior to demineralized dentin (p < 0.001), chitosan-treated specimens had higher bond strength than the untreated ones (p < 0.001), and those that underwent immediate analysis had higher values than the aged specimens (p = 0.019). No significant differences were observed in the chemical or morphological compositions.

Conclusions

Chitosan treatment improved bond strength both immediately and after aging, even in demineralized dentin.

Chitosan improves the durability of resin-dentin interface with etch-and-rinse or self-etch adhesive systems

Degradation of the dentin-resin interface can occur due to hydrolysis of exposed collagen, resulting in reduced bond strength. This study assessed the effect of dentin treatment with chitosan combined with an etch-and-rinse or self-etch adhesive system on improvement of bond strength and preservation of the interface durability.

Effect of TiF4/NaF and chitosan solutions on biofilm formation and prevention of dentin demineralization

OBJECTIVE

This study evaluated the effect of experimental solutions containing TiF₄/NaF and chitosan on bacterial species of microcosm biofilm and on dentin demineralization.

DESIGN

Microcosm biofilm was produced from human saliva mixed with McBain medium (0.2% sucrose) on bovine dentin for 5 days, under 5% CO₂ and 37 °C. From the 2nd day to 5th day, the treatments were applied (1×60s/day) as following: (1) NaF (500 ppm F^-, positive control); (2) TiF₄ and NaF (TiF₄: 190 ppm Ti⁴⁺ and 300 ppm F^-; NaF: 190 ppm F^-); (3) similar to 2 plus 0.5% chitosan (Ch 500 mPa.s, 75% deacetylation); (4) phosphate buffer solution (negative control); and (5) 0.5% chitosan (Ch 500 mPa.s, 75% deacetylation). CFU counting was performed for total microorganism, total streptococci, total lactobacilli and mutans streptococci. Dentin demineralization was measured by transverse microradiography-TMR. The data were compared using ANOVA/Tukey or Kruskal-Wallis/Dunn tests (p < 0.05).

RESULTS

No differences were found between the treatments with respect to CFU counting (p > 0.05). Dentin treated with TiF₄/NaF plus chitosan solution presented the lowest demineralization compared to the negative control and pure chitosan solution. On the other hand, this experimental solution did not significantly differ from TiF₄/NaF solution, being both able to significantly reduce mineral loss.

CONCLUSION

TiF₄/NaF plus chitosan solution, at suitable pH to be clinically applicable, had no antimicrobial effect, but it was able to reduce dentin caries development under this model.

Effect of green tea-loaded chitosan nanoparticles on leathery dentin microhardness

The purpose of this study was to assess the effect of a chitosan-based nanoformulation containing green tea on leathery (remaining) dentin subsurface microhardness. Size distribution, polydispersity index (PDI) and zeta potential (mV) of nanoformulations were previously determined by dynamic light scattering (DLS). Human dentin specimens were exposed to Streptococcus mutans for 14 d. Soft dentin were selectively removed by Er:YAG laser (n = 30) or bur (n = 30). Remaining dentin was biomodified with chitosan nanoparticles (Nchi, n = 10) or green tea-loaded chitosan nanoparticles (Gt + Nchi, n = 10) for 1 min. Control group (n = 10) did not receive any treatment. Subsurface microhardness (Knoop) was evaluated in hard (sound) and soft dentin, and then, in leathery dentin and after its biomodification, at depths of 30, 60 and 90 μm from the surface. Nchi reached an average size of ≤ 300 nm, PDI varied between 0.311 and 0.422, and zeta potential around + 30 mV. Gt + Nchi reached an average size of ≤ 350 nm, PDI < 0.45, and zeta potential around + 40 mV. Soft dentin showed significantly reduced microhardness at all depths (p > 0.05). The subsurface microhardness was independent of choice of excavation method (p > 0.05). At 30 µm from the surface, Gt + Nchi increased the leathery dentin microhardness compared to untreated group (p < 0.05). Nchi promoted intermediate values (p > 0.05). Both nanoformulations showed an average size less than 350 nm with nanoparticles of different sizes and stability along the 90-day period evaluated. Subsurface microhardness of bur-treated and laser-irradiated dentin was similar. At 30 µm, the biomodification with Gt + Nchi improved the microhardness of leathery dentin, independently of caries excavation method used.

3D-MID Technology for Surface Modification of Polymer-Based Composites: A Comprehensive Review

The three-dimensional molded interconnected device (3D-MID) has received considerable attention because of the growing demand for greater functionality and miniaturization of electronic parts. Polymer based composite are the primary choice to be used as substrate. These materials enable flexibility in production from macro to micro-MID products, high fracture toughness when subjected to mechanical loading, and they are lightweight. This survey proposes a detailed review of different types of 3D-MID modules, also presents the requirement criteria for manufacture a polymer substrate and the main surface modification techniques used to enhance the polymer substrate. The findings presented here allow to fundamentally understand the concept of 3D-MID, which can be used to manufacture a novel polymer composite substrate.

The interaction of sodium trimetaphosphate with collagen I induces conformational change and mineralization that prevents collagenase proteolytic attack

OBJECTIVES

This study evaluated the cell viability and expression of different major genes involved in mineralization in odontoblast-like cells exposed to sodium trimetaphosphate (STMP). It was also investigated the influence of STMP on the rate of calcium phosphate crystal growth, its anti-proteolytic action against the enzymatic degradation of type I collagen, the binding mechanism of STMP to collagen fibrils, and the potential mechanism to induce collagen stabilization.

METHODS

Immortalized rat odontoblast MDPC-23 cells were cultured. Cell viability was assessed by trypan blue staining, and the changes in gene expression balance induced by STMP were assessed by quantitative reverse transcription (qRT) PCR assays. Crystalline particle formation was monitored by light-scattering detectors to estimate pH variation and the radial size of the crystalline particles as a function of reaction time (pH 7.4, 25°C) in the presence of STMP in supersaturated calcium phosphate solution (Ca/P=1.67). Images were obtained under atomic force microscopy (AFM) to measure the particle size in the presence of STMP. A three-point bending test was used to obtain the elastic modulus of fully demineralized dentin beams after immersion in STMP solution. The binding mechanism of STMP to collagen fibrils and potential stabilization mechanism was assessed with circular dichroism spectrometry (CD). The data were analyzed statistically (α=0.05).

RESULTS

STMP had no significant influence on the cell viability and gene expression of the MDPC-23 cells. STMP greatly increased the rate of crystal growth, significantly increasing the average radial crystal size. AFM corroborated the significant increase of STPM-treated crystal size. Mineralized collagen I fibrils exhibited less collagenase degradation with lower STMP concentration. CD analysis demonstrated changes in the conformational stability after STMP binding to type I collagen.

SIGNIFICANCE

The increased resistance of collagen against the proteolytic activity of collagenases appears to be related to the conformational change induced by STMP binding in collagen I and the STMP capacity for promoting biomimetic mineralization in type I collagen fibrils.