Microstructure and mechanical properties of an alpha keratin bovine hoof wall

Hierarchical modeling of elastic moduli of equine hoof wall

This study predicts analytically effective elastic moduli of substructures within an equine hoof wall. The hoof wall is represented as a composite material with a hierarchical structure comprised of a sequence of length scales. A bottom-up approach is employed. Thus, the outputs from a lower spatial scale serve as the inputs for the following scale. The models include the Halpin-Tsai model, composite cylinders model, a sutured interface model, and classical laminate theory. The length scales span macroscale, mesoscale, sub-mesoscale, microscale, sub-microscale, and nanoscale. The macroscale represents the hoof wall, consisting of tubules within a matrix at the mesoscale. At the sub-mesoscale, a single hollow tubule is reinforced by a tubule wall made of lamellae; the surrounding intertubular material also has a lamellar structure. The lamellae contain sutured and layered cells at the microscale. A single cell is made of crystalline macrofibrils arranged in an amorphous matrix at the sub-microscale. A macrofibril contains aligned crystalline rod-like intermediate filaments at the nanoscale. Experimentally obtained parameters are used in the modeling as inputs for geometry and nanoscale properties. The predicted properties of the hoof wall material agree with experimental measurements at the mesoscale and macroscale. We observe that the hierarchical structure of the hoof wall leads to a decrease in the elastic modulus with increasing scale, from the nanoscale to the macroscale. Such behavior is an intrinsic characteristic of hierarchical biological materials. This study can serve as a framework for designing impact-resistant hoof-inspired materials and structures.

Improving Transungual Permeation Study Design by Increased Bovine Hoof Membrane Thickness and Subsequent Infection

Ungual formulations are regularly tested using human nails or animal surrogates in Franz diffusion cell experiments. Membranes sometimes less than 100 µm thick are used, disregarding the higher physiological thickness of human nails and possible fungal infection. In this study, bovine hoof membranes, healthy or infected with Trichophyton rubrum, underwent different imaging techniques highlighting that continuous pores traversed the entire membrane and infection resulted in fungal growth, both superficial, as well as in the membrane’s matrix. These membrane characteristics resulted in substantial differences in the permeation of the antifungal model substance bifonazole, depending on the dosage forms. Increasing the thickness of healthy membranes from 100 µm to 400 µm disproportionally reduced the permeated amount of bifonazole from the liquid and semisolid forms and allowed for a more pronounced assessment of the effects by excipients, such as urea as the permeation enhancer. Similarly, an infection of 400-µm membranes drastically increased the permeated amount. Therefore, the thickness and infection statuses of the membranes in the permeation experiments were essential for a differential readout, and standardized formulation-dependent experimental setups would be highly beneficial.

A Cross-Sectional Epizootiological Study and Risk Assessment of Foot-Related Lesions and Lameness in Intensive Dairy Sheep Farms

Simple Summary

Foot-related lameness is one of the most significant welfare issues in farm animals. Contrary to dairy cows and meat sheep breeds, epizootiological data on foot-lesions and associated lameness in dairy sheep are scarce. In this study, data were collected from 30 representative intensive dairy sheep farms. Multivariate statistical analysis was used to produce a typology of intensive farming systems which resulted in the assignment of farms in two distinct clusters. Six hundred adult ewes were randomly selected from six flocks (three flocks per cluster) and a cross-sectional study was implemented to investigate the epizootiology and potential risk factors of foot-related lameness, foot-lesions and diseases. Ovine interdigital dermatitis and infectious footrot were the most common infectious foot diseases, while white line disease and hoof wall cracks were the most prevalent non-infectious lesions. Infectious footrot was the main cause of lameness and increased with age, whereas body condition score was associated with increased prevalence of ovine interdigital dermatitis. Comparisons between the clusters regarding foot-related lameness, foot-diseases and lesions at the animal, the limb, and the hoof level are presented, and relevant literature, mechanisms, hypotheses, and challenges of the field are discussed.

Abstract

Foot-related lameness, foot-diseases and lesions are emerging issues in dairy sheep; however, relevant epizootiological studies are scarce, and risk factors have not been elucidated. The objectives of this cross-sectional study were (i) to address this dearth of knowledge by investigating the epizootiology of lameness-related foot-lesions and diseases, and (ii) to assess the impact of potential risk factors on foot health, in intensive dairy sheep farms. Thirty farms were assigned in two representative clusters using a multivariate statistical analysis. Three farms per cluster and 100 multiparous milking ewes per farm (total n = 600) were selected and enrolled in the study. Foot-related lameness, ovine interdigital dermatitis (OID), infectious footrot (IFR), white line disease, hoof wall cracks, as well as health and welfare traits were recorded. Overall prevalence of foot-related lameness was 9.0% and was primarily associated with IFR; however, additional infectious and non-infectious foot diseases and lesions also contributed. Among infectious foot diseases, OID was the most prevalent (21.3%) followed by IFR (8.0%); WLD and hoof wall cracks were the most prevalent non-infectious foot-lesions (37.7% and 15.3%, respectively). IFR and OID prevalence increased with age (p < 0.05) and BCS (p < 0.01), respectively, suggesting that host-related factors and husbandry practices are important determinants of its occurrence.

Nanoindentation and Hierarchy Structure of the Bovine Hoof Wall

The bovine hoof wall with an α-keratin structure protects the bovine foot from impact loads when the cattle are running. Reduced modulus, hardness and creep behavior of the bovine hoof wall have been investigated by a nanoindentation technique. The average reduced modulus of the Transverse Direction (TD) specimens from the outside to inside wall is 3.76 and 2.05 GPa, respectively, while the average reduced modulus of the Longitudinal Direction (LD) specimens from the outside to inside wall is 4.54 and 3.22 GPa, respectively. Obviously, the orientation and the position of the bovine hoof wall have a significant influence on its mechanical properties. The use of the generalized Voigt–Kelvin model can make a good prediction of creep stage. Mechanical properties of the LD specimens are stronger than those of the TD specimens. The bovine hoof wall has a layered structure, which can effectively absorb the energy released by the crack propagation and passivate the crack tip. Therefore, a kind of structural model was designed and fabricated by three-dimensional printing technology, which has a 55% performance improvement on fracture toughness. It is believed that the reported results can be useful in the design of new bionic structure materials which may be used in motorcycle helmets and athletes’ protective equipment to achieve light weight and improved strength at the same time.