Adsorption studies of volatile organic compounds on germanene nanotube emitted from banana fruit for quality assessment – A density functional application

Mechanical characteristics and failure behavior of puckered and buckled allotropes of antimonene nanotubes: a molecular dynamics study

In recent years, antimonene nanotubes have attracted considerable interest for diverse applications owing to their promising physical properties. In this study, classical molecular dynamics simulations with Stillinger-Weber potential were carried out to explore the fundamental mechanical characteristics of two stable allotropes of antimonene nanotubes (SbNTs), namely puckered (α-) and buckled (β-) nanotubes. Mechanical properties and deformation mechanisms of antimonene nanotubes, including ultimate tensile strength, fracture strain, and Young's modulus, were thoroughly examined by considering chirality, diameter, temperature, and strain rate variables. Numerical simulations revealed that all SbNT specimens examined in this study exhibit brittle failures with a complete loss of load-bearing capability following the ultimate stress level. The brittle nature of the SbNTs with varied diameters remained unchanged under different temperatures and loading-rate conditions. Owing to their distinct crystal structure in the armchair and zigzag directions, α-SbNTs present a distinctive anisotropic behavior compared to β-SbNTs. While the variation of the elastic modulus with temperature is not notable, the tensile strength and fracture strain of SbNTs deteriorated considerably at high temperatures. Furthermore, it was observed that the effects of diameter and temperature on zigzag α-SbNT are more pronounced due to its lower stability. Altogether, this study presents a comprehensive examination of the mechanical characteristics of the two stable antimonene allotropes and provides useful information for their potential utilizations in a wide range of applications.

The physio-chemical properties and applications of 2D nanomaterials in agricultural and environmental sustainability

Global hunger and nutritional deficiency demand the advancement of existing and conventional approaches to food production. The application of nanoenabled strategies in agriculture has opened up new avenues for enhancing crop yield and productivity. Recently, two-dimensional (2D) nanomaterials (NMs) have manifested new possibilities for increasing food production and nutrition. Graphene nanosheets, the 2D form of graphene has been exemplary in enhancing the loading capacity of agro-active ingredients, their target-specific delivery, bioavailability, and controlled release with slow degradation, resulting in the increased shelf-life/active time of the agro-active components. Also, the development of novel formulations/composites of MXenes and Transition Metal Dichalcogenides (TMDs) can foster plant growth, metabolism, crop production, protection and improvement of soil quality. Additionally, the 2D NM-based biosensors can monitor the nutrient levels and other parameters affecting agronomical traits in plants. This review provides an insight into the details of 2D NM synthesis and functionalization methods. Notably, the review highlights the broad-range of 2D NM applications and their suitability in the development of nanotechnology-based agriformulations. The 2D NM-based derivatives have shown immense potential in enhancing the pedologic parameters, crop productivity, pest-protection and nutritional value. Thus, assisting in achieving food and environmental sustainability goals.

Cyclic versus straight chain oligofuran as sensor: A detailed DFT study

This study presents a novel approach for exploring the sensitivity and selectivity of cyclic oligofuran (5/6/7CF) toward gaseous analytes and their comparison with straight chain analogues (5/6/7SF). The work is not only vital to understand the superior sensitivity but also for rational design of new sensors based on cyclic ring structures of oligofuran. Interaction of cyclic and straight chain oligofuran with NH₃, CO, CO₂, N₂H₄, HCN, H₂O₂, H₂S, CH₄, CH₃OH, SO₂, SO₃ and H₂O analytes is studied via DFT calculation at B3LYP-D3/6-31++G (d, p) level of theory. The sensitivity and selectivity are illustrated by the thermodynamic parameters (E_bind, SAPT0 energies, NCI analysis), electronic properties (H-L gap, percentage of average energy gap, CHELPG charge transfer, DOS spectra), and UV-Vis analysis. All these properties are simulated at B3LYP/6-31G (d) level of theory while UV-Vis is calculated at TD-DFT method. Cyclic oligofurans have high binding energies with analytes compared to 5/6/7SF which corresponds to higher sensitivity of 5/6/7CF. Furthermore, the cyclization of oligofuran significantly improves the sensitivity and selectivity of the system. Alteration in electronic properties of 5/6/7CF and 5/6/7SF is remarkably high upon complexation with SO₂ and SO₃. Further the stability of rings (5, 6 and 7 membered cyclic oligofurans) and their SO₃ complexes is also confirmed by molecular dynamics calculations. The findings of the work clearly suggest that the cyclic geometry enhances not only sensitivity but also selectivity of conducting polymers (oligofuran).

Exceptionally high NLO response and deep ultraviolet transparency of superalkali doped macrocyclic oligofuran rings

Cyclic oligofurans containing five and six furan rings (5CF & 6CF) doped with superalkalis are presented here as a new type of NLO material.

A comprehensive DFT study on the sensing abilities of cyclic oligothiophenes (nCTs)

Linear conducting polymers are extensively studied as sensors for various analytes, whereas studies on cyclic analogues are limited.

Detection of trace level of hazardous phosgene gas on antimonene nanotube based on first-principles method

Using first-principles calculations, electronic characteristics and geometrical stability of pure and Sn substituted armchair β - antimonene nanotube (SbNT) is explored. The adsorption behavior of phosgene (COCl₂) on SbNT is studied using ab initio method. Also, the effect of base material sensitivity with the influence of substitution of Sn dopant is studied. The SbNT energy band structure gets altered upon exposure to the COCl₂ gas molecules. The density-of-states (DOS) spectrum gives the precision on the transfer of charge during the interaction of COCl₂ gas on SbNT material. Moreover, the phosgene molecules interaction on SbNT results in the variation of adsorption energy around -0.578 to -1.364 eV. Further, the average band gap changes are detected in the range of 1.75-19.3% for pristine SbNT, and 192.31-369.23% for Sn substituted SbNT material. The findings suggest that the physisorption of phosgene gas on Sn substituted SbNT is found to be more significant when compared to pristine SbNT. The current work shows that Sn substituted SbNT as a good base material to probe phosgene gas molecules.