A laser micromachined probe for recording multiple field potentials in the thalamus

Fabrication of a photo-crosslinkable fluoropolymer-passivated flexible neural probe and acute recording and stimulation performances in vivo

Herein, we fabricated fluorine-containing, polymer-based, flexible neural probes with fluorinated ethylene propylene (FEP) films as the substrates and photo-crosslinkable fluoropolymers as the passivation material. For fabrication, metal-free Au layer formation on the FEP film, the simultaneous photo-adhesion and photo-patterning technique, and the pulsed-laser scanning probe shaping technique were combined, followed by Au electrode surface modification. The resultant probes achieved a charge injection limit equal to 5.18 mC cm-2 by implementing iridium oxide-modified nanoporous Au (IrOx/NPG) structures. We performed simultaneous in vivo micro-stimulations of the Schaffer collateral fibres and recorded the evoked field excitatory postsynaptic potentials (fEPSPs) in the stratum radiatum layer of the hippocampal Cornu Ammonis 1 region using a single probe. Inducing the fEPSP at very low charge per pulse settings (3.2-3.6 nC/pulse) indicates the efficient charge injection capability of the IrOx/NPG electrode, thereby enabling safe, prolonged, and thrifty micro-stimulations. Furthermore, the single probe-induced and recorded long-term potentiation persisted for periods longer than 60 min following theta-burst stimulation. The materials used in this study are all biocompatible and chemically robust. The fabricated neural probes can be applied in chronic clinical trials in vivo.

Proof of Concept for Sustainable Manufacturing of Neural Electrode Array for In Vivo Recording

Increasing requirements for neural implantation are helping to expand our understanding of nervous systems and generate new developmental approaches. It is thanks to advanced semiconductor technologies that we can achieve the high-density complementary metal-oxide-semiconductor electrode array for the improvement of the quantity and quality of neural recordings. Although the microfabricated neural implantable device holds much promise in the biosensing field, there are some significant technological challenges. The most advanced neural implantable device relies on complex semiconductor manufacturing processes, which are required for the use of expensive masks and specific clean room facilities. In addition, these processes based on a conventional photolithography technique are suitable for mass production, which is not applicable for custom-made manufacturing in response to individual experimental requirements. The microfabricated complexity of the implantable neural device is increasing, as is the associated energy consumption, and corresponding emissions of carbon dioxide and other greenhouse gases, resulting in environmental deterioration. Herein, we developed a fabless fabricated process for a neural electrode array that was simple, fast, sustainable, and customizable. An effective strategy to produce conductive patterns as the redistribution layers (RDLs) includes implementing microelectrodes, traces, and bonding pads onto the polyimide (PI) substrate by laser micromachining techniques combined with the drop coating of the silver glue to stack the laser grooving lines. The process of electroplating platinum on the RDLs was performed to increase corresponding conductivity. Sequentially, Parylene C was deposited onto the PI substrate to form the insulation layer for the protection of inner RDLs. Following the deposition of Parylene C, the via holes over microelectrodes and the corresponding probe shape of the neural electrode array was also etched by laser micromachining. To increase the neural recording capability, three-dimensional microelectrodes with a high surface area were formed by electroplating gold. Our eco-electrode array showed reliable electrical characteristics of impedance under harsh cyclic bending conditions of over 90 degrees. For in vivo application, our flexible neural electrode array demonstrated more stable and higher neural recording quality and better biocompatibility as well during the 2-week implantation compared with those of the silicon-based neural electrode array. In this study, our proposed eco-manufacturing process for fabricating the neural electrode array reduced 63 times of carbon emissions compared to the traditional semiconductor manufacturing process and provided freedom in the customized design of the implantable electronic devices as well.

Extrapolating meaning from local field potential recordings

Local field potentials (LFP) reflect the spatially weighted low-frequency activity nearest to a recording electrode. LFP recording is a window to a wide range of cellular activities and has gained increasing attention over recent years. We here review major conceptual issues related to LFP with the goal of creating a resource for non-experts considering implementing LFP into their research. We discuss the cellular activity that constitutes the local field potential; recording techniques, including recommendations and limitations; approaches to analysis of LFP data (with focus on power-banded analyses); and finally we discuss reports of the successful use of LFP in clinical applications.

High-fidelity evoked potential for mapping the rat tail in thalamus

The technique of field potentials (FPs) provides a macroscopic view for exploring brain function, and is supplementary to single-unit recording, a microscopic view that investigates each neuron in great detail. Mapping the rat tail in the ventroposterolateral (VPL) nucleus of the thalamus was carried out by analyzing the current source density (CSD) of the evoked FPs. The results showed a clear somatotopic organization of the tail in the VPL nucleus. Also, to obtain high-fidelity FPs, two recording parameters were determined. Based upon cross-correlation coefficient (rho), the cycles of FPs needed to be averaged should not be less than 50 and the distance between the two recording sites should be no longer than 50 mum in each direction (mediolateral, anteroposterior and ventrodorsal). Under these conditions, the representation (or reproducibility) of an FP can be >95%. The procedures used to determine these parameters can serve as a guide to obtain FPs with high signal-to-noise ratio and without spatial aliasing error.

Surgery Insight: deep brain stimulation for movement disorders

Over the past two decades, deep brain stimulation (DBS) has supplanted lesioning techniques for the treatment of movement disorders, and has been shown to be safe and efficacious. The primary therapeutic indications for DBS are essential tremor, dystonia and Parkinson's disease. In the case of Parkinson's disease, DBS is effective for treating the primary symptoms--tremor, bradykinesia and rigidity--as well as the motor complications of drug treatment. Progress has been made in understanding the effects of stimulation at the neuronal level, and this knowledge should eventually improve the effectiveness of this therapy. Preliminary studies also indicate that DBS might be used to treat Tourette's syndrome, obsessive-compulsive disorder, depression and epilepsy. As we will discuss in this review, the success of DBS depends on an appropriate rationale for the procedure, and on collaborations between neurologists and neurosurgeons in defining outcomes.

Differences between somatosensory-evoked potentials recorded from the ventral posterolateral thalamic nucleus, primary somatosensory cortex and vertex in the rat

Somatosensory-evoked potential (SEP) components recorded over the primary somatosensory cortex (SI) and vertex in the rat within the 10-30 ms latency range were characterised with respect to the anatomy and function of the primary somatosensory pathway. To this aim, these components were compared to SEP components in the similar latency range recorded from the ventral posterolateral thalamic (VPL) nucleus, a nucleus known to be part of the subcortical structure of the primary somatosensory pathway and were described with respect to their stimulus-response characteristics and their response to the mu-opioid agonist fentanyl. The VPL positive (P)11-negative (N)18-P22 and SI P13-N18-P22 differed with respect to peak occurrence (P11 versus P13, respectively) and waveform morphology, but did not differ with respect to stimulus-response characteristics and their response to fentanyl. When compared to the vertex P15-N19-P26, the VPL P11-N18-P22 and SI P13-N18-P22 complex follow a relatively fast acquisition in stimulus intensity-response and were affected significantly less to increasing stimulus frequencies and to fentanyl. These results demonstrated that when compared to the VPL-SEP and SI-SEP, the Vx-SEP was modulated differently by the experimental conditions. It is suggested that this may be related to involvement of neural structures within different functional somatosensory pathways.

Miniature telemetry system for the recording of action and field potentials

A simple miniature telemetry system for neural recording from freely moving rats is described. It weighs only 1% of the body weight of an adult rat and its recordings are devoid of artifacts due to the animal movement. Together with its long recording time (more than 38 h), its isotropic nature, which is essential for working with freely moving animals, offers further advantages. A frequency-modulation receiver with a flat frequency response down to 6 Hz has been designed for wide-spectrum recording of neural signals, allowing field potential recordings. A detailed printed-circuit layout and the lack of a trimming requirement will allow the system to be easily duplicated by other neuroscientists who are not familiar with wireless-transmission technologies.