Laser-detected lateral muscle displacement is correlated with force fluctuations during voluntary contractions in humans

Influence of age on force and re-lengthening dynamics after tetanic stimulation withdrawal in the tibialis anterior muscle

PURPOSE

During alternate movements across a joint, the changeover from one direction of rotation to the opposite may be influenced by the delay and rate of tension reduction and the compliance to re-lengthening of the previously active muscle group. Given the aging process may affect the above-mentioned factors, this work aimed to compare the dynamics of both the ankle torque decline and muscle re-lengthening, mirrored by mechanomyogram (MMG), in the tibialis anterior because of its important role in gait.

METHODS

During the relaxation phase, after a supramaximal 35 Hz stimulation applied at the superficial motor point, in 20 young (Y) and 20 old (O) subjects, the torque (T) and MMG dynamics characteristics were measured.

RESULTS

The T and MMG analysis provided: (I) the beginning of the decay after cessation of stimulation (T: 22.51 ± 5.92 ms [Y] and 51.35 ± 15.21 ms [O]; MMG: 27.38 ± 6.93 ms [Y] and 61.41 ± 18.42 ms [O]); (II) the maximum rate of reduction (T: - 110.4 ± 45.56 Nm/s [Y] and - 52.72 ± 32.12 Nm/s [O]; MMG: - 24.47 ± 10.95 mm/s [Y] and - 13.76 ± 6.54 mm/s [O]); (III) the muscle compliance, measuring the MMG reduction of every 10% reduction of torque (bin 20-10%: 15.69 ± 7.5[Y] and 10.8 ± 3.3 [O]; bin 10-0%: 22.12 ± 10.3 [Y] and 17.58 ± 5.6 [O]).

CONCLUSION

Muscle relaxation results are different in Y and O and can be monitored by a non-invasive method measuring physiological variables of torque and re-lengthening dynamics at the end of the electromechanical coupling previously induced by the neuromuscular stimulation.

Estimation of contractile parameters of successive twitches in unfused tetanic contractions of single motor units - A proof-of-concept study using ultrafast ultrasound imaging in vivo

During a voluntary contraction, motor units (MUs) fire a train of action potentials, causing summation of the twitch forces, resulting in fused or unfused tetanus. Twitches have been important in studying whole-muscle contractile properties and differentiation between MU types. However, there are still knowledge gaps concerning the voluntary force generation mechanisms. Current methods rely on the spike-triggered averaging technique, which cannot track changes in successive twitches' properties in response to individual neural firings. This study proposes a method that estimates successive twitches contractile parameters of single MUs during low force voluntary isometric contractions in human biceps brachii. We used a previously developed ultrafast ultrasound imaging method to estimate unfused tetanic activity signals of single MUs. A twitch decomposition model was used to decompose unfused tetanic activity signals into individual twitches. This study found that the contractile parameters varied within and across MUs. There was an association between the inter-spike interval and the contraction time (r = 0.49,p < 0.001) and the half-relaxation time (r = 0.58,p < 0.001), respectively. The method shows the proof-of-concept to study MU contractile properties of individual twitches in vivo, which can provide further insights into the force generation mechanisms of voluntary contractions and response to individual neural discharges.

Mechanomyogram amplitude vs. isometric ankle plantarflexion torque of human medial gastrocnemius muscle at different ankle joint angles

The purpose of this study was to investigate the influence of changes in ankle joint angle on the mechanomyogram (MMG) amplitude of the human medial gastrocnemius (MG) muscle during voluntary isometric plantarflexion contractions. Ten healthy individuals were asked to perform voluntary isometric contractions at six different contraction intensities (from 10% to 100%) and at three different ankle joint angles (plantarflexion of 26°; plantarflexion of 10°; dorsiflexion of 3°). MMG signals were recorded from the surface over the MG muscle, using a 3-axis accelerometer. The relations between root mean square (RMS) MMG and isometric plantarflexion torque at different ankle joint angles were characterized to evaluate the effects of altered muscle mechanical properties on RMS MMG. We found that the relation between RMS MMG and plantarflexion torque is changed at different ankle joint angles: RMS MMG increases monotonically with increasing the plantarflexion torque but decreases as the ankle joint became dorsiflexed. Moreover, RMS MMG shows a negative correlation with muscle length, with passive torque, and with maximum voluntary torque, which were all changed significantly at different ankle joint angles. Our findings demonstrate the potential effects of changing muscle mechanical properties on muscle vibration amplitude. Future studies are required to explore the major sources of this muscle vibration from the perspective of muscle mechanics and muscle activation level, attributable to changes in the neural command.

Tensiomyography Derived Parameters Reflect Skeletal Muscle Architectural Adaptations Following 6-Weeks of Lower Body Resistance Training

Measurement of muscle specific contractile properties in response to resistance training (RT) can provide practitioners valuable information regarding physiological status of individuals. Field based measurements of such contractile properties within specific muscle groups, could be beneficial when monitoring efficacy of training or rehabilitation interventions. Tensiomyography (TMG) quantifies contractile properties of individual muscles via an electrically stimulated twitch contraction and may serve as a viable option in the aforementioned applications. Thus, aims of this study were; (i) to investigate the potential use of TMG to quantify training adaptations and differences, in response to exercise specific lower limb RT; and (ii) investigate any associations between TMG parameters and accompanying muscle architectural measures. Non-resistance trained male participants (n = 33) were randomly assigned to 1 of 3 single-exercise intervention groups (n = 11 per group); back squat (BS), deadlift (DL), or hip thrust (HT). Participants completed a 6-week linearized training program (2× per week), where the assigned exercise was the sole method of lower body training. Pre- and post-intervention testing of maximal dynamic strength was assessed by one repetition maximum (1RM) of BS, DL, and HT. Radial muscle belly displacement (Dm) and contraction time (Tc) were obtained via TMG from the rectus femoris (RF) and vastus lateralis (VL) pre- and post-intervention, alongside muscle architectural measures (pennation angle and muscle thickness). All three groups displayed significant increases all 1RM strength tests (p < 0.001; pη2 = 0.677-0.753). Strength increases were accompanied by significant overall increases in RF muscle thickness (p < 0.001, pη2 = 0.969), and pennation angle (p = 0.007, pη2 = 0.220). Additionally, an overall reduction in RF Dm (p < 0.001, pη2 = 0.427) was observed. Significant negative relationships were observed between RF Dm and pennation angle (p = 0.003, r = -0.36), and with RF Dm and muscle thickness (p < 0.001, r = -0.50). These findings indicate that TMG is able to detect improved contractile properties, alongside improvements in muscle function within an untrained population. Furthermore, the observed associations between Dm and muscle architecture suggest that TMG contractile property assessments could be used to obtain information on muscle geometry.

Assessment of Skeletal Muscle Contractile Properties by Radial Displacement: The Case for Tensiomyography

Skeletal muscle operates as a near-constant volume system; as such muscle shortening during contraction is transversely linked to radial deformation. Therefore, to assess contractile properties of skeletal muscle, radial displacement can be evoked and measured. Mechanomyography measures muscle radial displacement and during the last 20 years, tensiomyography has become the most commonly used and widely reported technique among the various methodologies of mechanomyography. Tensiomyography has been demonstrated to reliably measure peak radial displacement during evoked muscle twitch, as well as muscle twitch speed. A number of parameters can be extracted from the tensiomyography displacement/time curve and the most commonly used and reliable appear to be peak radial displacement and contraction time. The latter has been described as a valid non-invasive means of characterising skeletal muscle, based on fibre-type composition. Over recent years, applications of tensiomyography measurement within sport and exercise have appeared, with applications relating to injury, recovery and performance. Within the present review, we evaluate the perceived strengths and weaknesses of tensiomyography with regard to its efficacy within applied sports medicine settings. We also highlight future tensiomyography areas that require further investigation. Therefore, the purpose of this review is to critically examine the existing evidence surrounding tensiomyography as a tool within the field of sports medicine.

Robotic finger perturbation training improves finger postural steadiness and hand dexterity

The purpose of the study was to understand the effect of robotic finger perturbation training on steadiness in finger posture and hand dexterity in healthy young adults. A mobile robotic finger training system was designed to have the functions of high-speed mechanical response, two degrees of freedom, and adjustable loading amplitude and direction. Healthy young adults were assigned to one of the three groups: random perturbation training (RPT), constant force training (CFT), and control. Subjects in RPT and CFT performed steady posture training with their index finger using the robot in different modes: random force in RPT and constant force in CFT. After the 2-week intervention period, fluctuations of the index finger posture decreased only in RPT during steady position-matching tasks with an inertial load. Purdue pegboard test score improved also in RPT only. The relative change in finger postural fluctuations was negatively correlated with the relative change in the number of completed pegs in the pegboard test in RPT. The results indicate that finger posture training with random mechanical perturbations of varying amplitudes and directions of force is effective in improving finger postural steadiness and hand dexterity in healthy young adults.

The Skin Acts to Maintain Muscle Shear Modulus

It is not clear how the tissues covering the skeletal muscles affect the muscles' mechanical properties. The main purpose of this study was to examine changes in muscle shear modulus as a representative mechanical property of muscle with and without the covering tissues of skin and epimysium (fascia). Shear modulus of the medial gastrocnemius (MG) muscle was determined using ultrasound shear-wave elastography in the Thiel's embalmed cadavers under three different conditions: original (intact cadavers), removal of the skin on the MG and subsequent removal of the epimysium. Muscle shear modulus significantly decreased by 50% after removal of the skin, whereas no additional changes in shear modulus were observed after subsequent removal of the epimysium. This study suggests that the skin is a main contributor for maintaining the muscle mechanical properties among tissues covering the skeletal muscle.

Oscillations in motor unit discharge are reflected in the low-frequency component of rectified surface EMG and the rate of change in force

Common drive to a motor unit (MU) pool manifests as low-frequency oscillations in MU discharge rate, producing fluctuations in muscle force. The aim of the study was to examine the temporal correlation between instantaneous MU discharge rate and rectified EMG in low frequencies. Additionally, we attempted to examine whether there is a temporal correlation between the low-frequency oscillations in MU discharge rate and the first derivative of force (dF/dt). Healthy young subjects produced steady submaximal force with their right finger as a single task or while maintaining a pinch-grip force with the left hand as a dual task. Surface EMG and fine-wire MU potentials were recorded from the first dorsal interosseous muscle in the right hand. Surface EMG was band-pass filtered (5-1,000 Hz) and full-wave rectified. Rectified surface EMG and the instantaneous discharge rate of MUs were smoothed by a Hann-window of 400 ms duration (equivalent to 2 Hz low-pass filtering). In each of the identified MUs, the smoothed MU discharge rate was positively correlated with the rectified-and-smoothed EMG as confirmed by the distinct peak in cross-correlation function with greater values in the dual task compared with the single task. Additionally, the smoothed MU discharge rate was temporally correlated with dF/dt more than with force and with rectified-and-smoothed EMG. The results indicated that the low-frequency component of rectified surface EMG and the first derivative of force provide temporal information on the low-frequency oscillations in the MU discharge rate.

A computational model of torque generation: neural, contractile, metabolic and musculoskeletal components

The pathway of voluntary joint torque production includes motor neuron recruitment and rate-coding, sarcolemmal depolarization and calcium release by the sarcoplasmic reticulum, force generation by motor proteins within skeletal muscle, and force transmission by tendon across the joint. The direct source of energetic support for this process is ATP hydrolysis. It is possible to examine portions of this physiologic pathway using various in vivo and in vitro techniques, but an integrated view of the multiple processes that ultimately impact joint torque remains elusive. To address this gap, we present a comprehensive computational model of the combined neuromuscular and musculoskeletal systems that includes novel components related to intracellular bioenergetics function. Components representing excitatory drive, muscle activation, force generation, metabolic perturbations, and torque production during voluntary human ankle dorsiflexion were constructed, using a combination of experimentally-derived data and literature values. Simulation results were validated by comparison with torque and metabolic data obtained in vivo. The model successfully predicted peak and submaximal voluntary and electrically-elicited torque output, and accurately simulated the metabolic perturbations associated with voluntary contractions. This novel, comprehensive model could be used to better understand impact of global effectors such as age and disease on various components of the neuromuscular system, and ultimately, voluntary torque output.