A study to evaluate psychological and occlusal parameters in bruxism

Repeatability and reproducibility of 2 digital occlusal analyzers for measuring the right- and left-side balance of occlusal contact forces: An in vitro study

STATEMENT OF PROBLEM

Although different digital occlusal analyzers have been marketed, comparative studies are lacking.

PURPOSE

The purpose of this in vitro study was to compare the repeatability and reproducibility of 2 different digital occlusal analyzers (T-Scan and OccluSense) for measuring the right- and left-side balance of occlusal contact forces.

MATERIAL AND METHODS

The repeatability and reproducibility of the 2 digital occlusal analyzers for measuring the balance of occlusal contact forces were determined and compared by using the Gauge Repeatability and Reproducibility tests based on the International Organization for Standardization (ISO), ISO 5725-2 and ISO 5725-3 standards. Ten different dental casts were mounted in the maximum intercuspation position on a semi-adjustable articulator. Then, the balance of occlusal contact forces in each of the 10 articulated dental casts was measured 24 times with each of the 2 digital occlusal analyzers. In addition, as the OccluSense, unlike the T-Scan, does not have a centering support for the piezoelectric film sensor, measurements with it were performed without and with a custom-designed and manufactured centering support. Finally, the repeatability and reproducibility of both digital occlusal analyzers were determined and compared using the Gauge Repeatability and Reproducibility tests.

RESULTS

The repeatability and reproducibility tests revealed that only 0.8% of the variance of the measurements obtained with the T-Scan was due to repeatability and reproducibility (0.4% repeatability, 0.4% reproducibility). In contrast, 12% of the variance of the measurements obtained with the OccluSense was due to repeatability and reproducibility (2.2% repeatability, 9.8% reproducibility). However, when using OccluSense with the centering support, the variance decreased to 6.4% (2.8% repeatability, 3.6% reproducibility). According to the Automotive Industry Action Group classification, the repeatability and reproducibility of the T-Scan were good, those of the OccluSense poor, and those of the OccluSense with the centering support medium.

CONCLUSIONS

The repeatability and reproducibility of the T-Scan were significantly better than those of the OccluSense for measuring the balance of occlusal contact forces. Furthermore, the repeatability and reproducibility of the OccluSense were significantly improved when used with a device to center the piezoelectric film sensor between the incisors. Nevertheless, the repeatability and reproducibility of the T-Scan were better.

Intraoral Scanning for Monitoring Dental Wear and Its Risk Factors: A Prospective Study

Dental wear arises from mechanical (attrition or abrasion) and chemical (erosion) factors. Despite its prevalence and clinical significance, accurately measuring and understanding its causes remain challenging in everyday practice. This one-year study with 39 participants involved comprehensive examinations and full-arch intraoral scans at the start and after 12 months. Volume loss exceeding 100 µ on each tooth's surfaces (buccal, lingual/palatine and incisal/occlusal) was measured by comparing three-dimensional scans from both time points. This study also assessed factors such as abrasion and erosion through clinical exams and questionnaires. There were no significant differences in dental wear in participants with sleep bruxism. However, noticeable wear occurred in the front teeth of those with waking bruxism and joint-related symptoms. Increased wear was associated with frequent consumption of acidic drinks, regular swimming, dry mouth, nocturnal drooling and heartburn, while no significant wear was found in patients with reflux. The used methodology proved effective in accurately assessing the progression of dental wear, which is important as many patients may initially be asymptomatic. The variability observed in dental wear patterns underscores the need to develop specific software applications that allow immediate and efficient comparison of wear areas based on extensive analysis of patient databases.

Why am I grinding and clenching? Exploration of personality traits, coping strategies, oral parafunctional behaviors, and severe sleep bruxism in a polysomnographic study

Introduction

Causal relationships between psychopathological symptoms, personality traits, coping mechanisms, and sleep bruxism (SB) were studied in the past, giving inconsistent results mostly based on self-assessment evaluations. This polysomnography-based cross-sectional study aimed to explore the relationships between severe SB, personality traits (according to the Big Five model), and coping strategies with objective polysomnographic verification.

Methodology

The study included 66 participants divided into severe SB (SSB) (n=32) and no or mild SB (n=34) groups based on video-polysomnography performed in the sleep laboratory. Questionnaire assessment included the use of the Beck Depression Inventory, Beck Anxiety Inventory, Mini-COPE, International Personality Item Pool Big Five Markers 20-Item version, and Oral Behavior Checklist.

Results

Participants with SSB presented with fewer self-reported anxiety (p=0.008) and depressive (p=0.01) symptoms than the non- or mild-SB groups. The SSB group scored significantly higher in Big Five personal traits such as extraversion (p=0.007), emotional stability (p=0.013), and intellect (p=0.004), while regarding coping strategies, the SSB group was less likely to use negative strategies: self-distraction (p=0.036), denial (p=0.006), venting (p=0.03), behavioral disengagement (p=0.046), and self-blame (p=0.003), and turning to religion (p=0.041). The intensity of oral parafunctional behaviors was comparable in both groups (p=0.054). Emotional stability was a moderate protective factor (p=0.004), and the self-blame strategy was a strong risk factor (p<0.001) for increased oral parafunctional behavior intensity. Phasic activity negatively correlated with anxiety symptom severity (p=0.005), whereas tonic (p=0.122) and mixed (p=0.053) phenotypes did not. SB intensity was a protective factor against anxiety symptoms (p=0.016).

Conclusion

In terms of psychopathology, severe sleep bruxers tend to present less severe anxiety and depressive symptoms, while some of their personality traits (extraversion, emotional stability, and intellect) were more strongly pronounced. SSB is possibly related to the lesser use of the "maladaptive" coping strategies and there were no specific coping strategies preferred by SSB participants, compared to the other group. These observations require further studies, as it should be determined whether SB (especially phasic activity) might be a form of a somatization/functional disorder. Further research should focus on the psychogenic background of oral parafunctional behaviors, which occur more often in less emotionally stable personalities and in people using self-blame coping strategies.

Prevalence of Bruxism in alcohol abusers: a systematic review conducted according to PRISMA guidelines and the cochrane handbook for systematic reviews of interventions

BACKGROUND

Bruxism, a common oral parafunctional behavior characterized by the grinding or clenching of teeth, is a multifactorial condition with potentially detrimental effects on oral health and overall well-being. In recent years, there has been growing interest in understanding the relationship between bruxism and alcohol abuse, as both are prevalent issues that may share underlying factors and exacerbate each other. This systematic review, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement, aims to evaluate the frequency of bruxism among individuals with alcohol abuse.

METHODS

A comprehensive search of electronic databases, including PubMed, Lilacs, Scopus and Web of Science, will be conducted to identify relevant studies published up to the knowledge cutoff date in January 2023. The search strategy will include keywords related to bruxism, alcohol abuse, and their synonyms. Inclusion criteria will encompass original research studies, such as observational, cross-sectional, cohort, and case-control studies, as well as clinical trials, that examine the relationship between bruxism and alcohol abuse. Two independent reviewers will perform the study selection, data extraction, and quality assessment, with discrepancies resolved by consensus.

RESULTS

The systematic review will present a summary of the identified studies, including the study design, characteristics of the study populations, and key findings related to the association between bruxism and alcohol abuse. The potential mechanisms underlying this relationship will also be explored. Subgroup analyses and the quality of evidence will be assessed. Finally, the implications of this association for clinical practice and further research will be discussed.

CONCLUSIONS

This systematic review will contribute to a better understanding of the interplay between bruxism and alcohol abuse, shedding light on potential risk factors, mechanisms, and clinical implications. The findings may have significant implications for the prevention, management, and treatment of bruxism, particularly in individuals with a history of alcohol abuse.

Risk factors of tooth wear in permanent dentition: A scoping review

BACKGROUND

Tooth wear (TW) prevalence is high and increasing and has important consequences on the patient's quality of life. Knowledge of risk factors is crucial to promote diagnosis, prevention strategies and timely interceptive treatment. Many studies have identified TW risk factors.

OBJECTIVE

This scoping review aims to map and describe suspected available factors associated with TW in permanent dentition based on quantitative measurement.

METHODS

The scoping review was conducted using the PRISMA extension of the Scoping Reviews checklist. The search was conducted in October 2022 from the Medline® (PubMed® interface) and Scopus® databases. Two independent reviewers selected and characterised the studies.

RESULTS

2702 articles were identified for assessment of titles and abstracts, and 273 articles were included in the review. The results show a need to standardise TW measurement indices and the study design. The included studies highlighted various factors, classified into nine domains: sociodemographic factors, medical history, drinking habits, eating habits, oral hygiene habits, dental factors, bruxism and temporomandibular disorders, behavioural factors, and stress. Results related to chemical TW (erosion) risk factors underline the importance of eating disorders, gastroesophageal reflux and lifestyle, particularly drinking and eating behaviours, which supports developing public health information campaigns and interventions. Besides chemical, this review identifies evidence of several mechanical TW risk factors, such as toothbrushing and bruxism; the influence of this last factor needs to be further explored.

CONCLUSIONS

TW management and prevention require a multidisciplinary approach. Dentists are in the first line to detect associated diseases such as reflux or eating disorders. Consequently, practitioners' information and guideline diffusion should be promoted, and a TW risk factors checklist (the ToWeR checklist) is proposed to help diagnostic approaches.

The Role of Emotion Regulation, Affect, and Sleep in Individuals With Sleep Bruxism and Those Without: Protocol for a Remote Longitudinal Observational Study

BACKGROUND

Sleep bruxism (SB) is an oral behavior characterized by high levels of repetitive jaw muscle activity during sleep, leading to teeth grinding and clenching, and may develop into a disorder. Despite its prevalence and negative outcomes on oral health and quality of life, there is currently no cure for SB. The etiology of SB remains poorly understood, but recent research suggests a potential role of negative emotions and maladaptive emotion regulation (ER).

OBJECTIVE

This study's primary aim investigates whether ER is impaired in individuals with SB, while controlling for affective and sleep disturbances. The secondary aim tests for the presence of cross-sectional and longitudinal mediation pathways in the bidirectional relationships among SB, ER, affect, and sleep.

METHODS

The study used a nonrandomized repeated-measures observational design and was conducted remotely. Participants aged 18-49 years underwent a 14-day ambulatory assessment. Data collection was carried out using electronic platforms. We assessed trait and state SB and ER alongside affect and sleep variables. We measured SB using self-reported trait questionnaires, ecological momentary assessment (EMA) for real-time reports of SB behavior, and portable electromyography for multinight assessment of rhythmic masticatory muscle activity. We assessed ER through self-reported trait questionnaires, EMA for real-time reports of ER strategies, and heart rate variability derived from an electrocardiography wireless physiological sensor as an objective physiological measure. Participants' trait affect and real-time emotional experiences were obtained using self-reported trait questionnaires and EMA. Sleep patterns and quality were evaluated using self-reported trait questionnaires and sleep diaries, as well as actigraphy as a physiological measure. For the primary objective, analyses will test for maladaptive ER in terms of strategy use frequency and effectiveness as a function of SB using targeted contrasts in the general linear model. Control analyses will be conducted to examine the persistence of the SB-ER relationship after adjusting for affective and sleep measures, as well as demographic variables. For the secondary objective, cross-sectional and longitudinal mediation analyses will test various competing models of directional effects among self-reported and physiological measures of SB, ER, affect, and sleep.

RESULTS

This research received funding in April 2017. Data collection took place from August 2020 to March 2022. In all, 237 participants were eligible and completed the study. Data analysis has not yet started.

CONCLUSIONS

We hope that the effort to thoroughly measure SB and ER using gold standard methods and cutting-edge technology will advance the knowledge of SB. The findings of this study may contribute to a better understanding of the relationship among SB, ER, affect, and sleep disturbances. By identifying the role of ER in SB, the results may pave the way for the development of targeted interventions for SB management to alleviate the pain and distress of those affected.

INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID)

DERR1-10.2196/41719.

Positional influence of center of masticatory forces on occlusal contact forces using a digital occlusal analyzer

STATEMENT OF PROBLEM

Digital occlusal analyzers allow the recording of dental contact forces. Some authors assume a unique location for the center of contact forces at the position of maximum intercuspation, while others indicate variations in dental contact forces when recorded at different times of the day. Which approach is more appropriate is unclear.

PURPOSE

The purpose of this in vitro study was to analyze whether a change in the balance of masticatory forces influences the location of the center of contact forces and its magnitude.

MATERIAL AND METHODS

Three different dental casts, selected under dental criteria, were mounted in maximum intercuspation on a semiadjustable articulator equipped with a pattern indicating 9 different force application points (intersection point between 3 longitudinal rows and 3 transverse columns). A force of constant magnitude (169 N) was applied 10 times at each of the application points, and occlusal forces were recorded with a digital occlusal analyzer. Then, two variables were studied: the location of the center of contact forces and its magnitude. Each force application position (9 positions × 3 dental casts=27 in total) was repeated 10 times, and measured data were statistically analyzed with 2-way repeated measures ANOVA (α=.05) test.

RESULTS

The repeatability of the method indicated that the coefficient of variation mean was 0.37% in the location of the center of contact forces and that its magnitude was 3.70%. The 2-way repeated measures ANOVA test revealed statistically significant variations in the location of the center of contact forces and its magnitude, revealing that longitudinal changes of the application point of masticatory forces affected the magnitude of contact forces and that longitudinal and transverse changes of the application point of masticatory forces affected the location of the center of contact forces.

CONCLUSIONS

The location of the center of contact force and its magnitude provided by a digital occlusal analyzer at the position of maximum intercuspation are not necessarily unique to each articulated dental cast. Even if the intensity of the masticatory force remains unchanged, changes in its lateral or longitudinal balance also influence the result of the occlusion forces.

Evaluation of occlusal pattern in periodontitis patients using T-scan analysis

Occlusal analysis is important to analyze any disharmony in occlusion. Atraumatic dental occlusion leads to evolution of T-scan. T-scan gives a valuable procedure for clinical assessment and perception of occlusal problems. T-scan can also be used in periodontitis patients for checking the occlusal pattern. Occlusal problems and periodontal disease relationship remains controversial. Further research is needed to determine whether occlusal adjustment is necessary for periodontal treatment. The main aim of the study was to assess the occlusal pattern using T-scan in periodontitis patients. Thirty periodontitis subjects were taken and checked for occlusion using T-scan. The subject's age group was 35-55 years. The study included 15 males and 15 females. Plaque index, gingival index, attachment loss, probing depth, centric occlusion (CO), protrusion, right lateral, and left lateral were the parameters studied. Occlusal adjustments were needed to decrease and dissipate the abnormal occlusal forces. The significance of statistical tests for various movements are as follows: CO (right and left) (P = 0.077) P > 0.05; protrusion (right and left) (P = 0.09) P > 0.05; left side lateral (right side and left side) (P = 0.01) P < 0.05; right lateral (right side and left side) (P = 0.00) P < 0.05. CO and protrusion (right, left) for males and females are not significant. Left lateral and right lateral (right, left) for males and females were significant. The T-scan manages adequate specificity and sensitivity. Hence, these act as a distinctive tool for diagnosis and better unreliable when used intraorally. The T-scan method is definitely a valuable tool for examining and evaluating the occlusal contacts during maximal intercuspation.

Neural Basis of Etiopathogenesis and Treatment of Cervicogenic Orofacial Pain

(1) Background and Objectives: The aim of this narrative review was to analyze the neuroanatomical and neurophysiological basis of cervicogenic pain in cervico-cranial pain syndromes, focusing particularly on cervico-orofacial syndromes as a background for the proper diagnosis and non-surgical treatment. Relevant literature on the topic from past 120 years has been surveyed. (2) Material and Methods: We surveyed all original papers, reviews, or short communications published in the English, Spanish, Czech or Slovak languages from 1900 to 2020 in major journals. (3) Results: The cervicogenic headache originates from the spinal trigeminal nucleus where axons from the C₁–C₃ cervical spinal nerves and three branches of the trigeminal nerve converge (trigeminocervical convergence) at the interneurons that mediate cranio-cervical nociceptive interactions. The role of the temporomandibular joint in the broad clinical picture is also important. Despite abundant available experimental and clinical data, cervicogenic orofacial pain may be challenging to diagnose and treat. Crucial non-surgical therapeutic approach is the orthopedic manual therapy focused on correction of body posture, proper alignment of cervical vertebra and restoration of normal function of temporomandibular joint and occlusion. In addition, two novel concepts for the functional synthesis of cervico-cranial interactions are the tricentric concept of mouth sensorimotor control and the concept of a cervicogenic origin of bruxism. (4) Conclusions: Understanding the basis of neuroanatomical and neurophysiological neuromuscular relations enables an effective therapeutic approach based principally on orthopedic manual and dental occlusal treatment.