Antibacterial effect of two mineral trioxide aggregate (MTA) preparations against Enterococcus faecalis and Streptococcus sanguis in vitro

Evaluation and comparison of four types of bio-ceramic materials AGM MTA, Ortho MTA, pro root MTA and Cem cement in oral and dental health

BACKGROUND AND OBJECTIVES

Mineral Trioxide Aggregate (MTA) is one of the main retrograde filling materials that is used today as a root end filling material and perforation repair material. This study was conducted with the aim of investigating the antibacterial and antifungal properties of four types of bio-ceramic materials, AGM MTA, Ortho MTA, Pro root MTA and Cem cement for oral and dental health.

METHODS

In this study, the antibacterial activity of four types of bio-ceramic materials against two bacterial strains of Enterococcus faecalis (ATTC 29212), Escherichia coli (ATTC 35318) and antifungal activity against Candida albicans (ATTC 10231) were investigated using the well diffusion method.

RESULTS

In the context of the relationship between the type of microorganism and the diameter of the growth inhibitory zone for each type of bio-ceramic material, there was no significant difference for Enterococcus faecalis, and a significant difference was observed for Escherichia coli and Candida albicans (p < 0.05).

CONCLUSION

The results show that each of the bio-ceramic materials AGM, Pro root, Cem cement and Ortho have antibacterial and antifungal properties. AGM MTA bio-ceramic material on Candida albicans fungus and Ortho MTA bio-ceramic material had the most effect on Escherichia coli bacteria. Therefore, the mentioned bio-ceramic materials can play a significant role in oral and dental health by providing a suitable material for restoration.

Evaluation of the pH and Antibacterial Efficacy of Mineral Trioxide Aggregate With and Without the Incorporation of Titanium Tetrafluoride

Introduction Microorganisms play an important role in causing inflammation in the pulp and periapical regions. Even after undergoing chemo-mechanical procedures during root canal treatment, bacteria may persist within dentinal tubules, posing a risk of disease recurrence. Mineral trioxide aggregate (MTA), introduced as a dental material, has been investigated as a potential antibacterial agent since its early use. Calcium and phosphorus are the primary ions in MTA, and their antibacterial characteristics are attributed to the release of calcium hydroxide through surface hydrolysis of calcium silicate components. Previous studies have shown that MTA has limited antimicrobial properties. Several alterations have been made to enhance the biological properties of MTA, such as incorporating nanoparticles made from silver, zinc, gold, and titanium. Therefore, in this study, titanium tetrafluoride (TiF4) was added to MTA in an effort to enhance its antimicrobial properties. Aim To compare and evaluate the antibacterial efficacy of MTA after the incorporation of TiF4. Materials and methods A total of 56 samples were made by mixing MTA with different weight proportions of TiF4 (1 wt%, 2 wt%, and 3 wt%). Out of these, 28 samples were taken to test each of the following properties: antibacterial efficacy and pH. The specimens were prepared using stainless steel molds of recommended dimensions for testing the pH. The pH was evaluated using a pH meter, and the antibacterial efficacy was assessed using the direct contact test. Data regarding the antibacterial efficacy and pH of MTA with various proportions of TiF4 were investigated for normality using the Kolmogorov-Smirnov test and assessed for normal distribution. The antibacterial properties among the four groups were analyzed using one-way analysis of variance (ANOVA), followed by pairwise multiple comparisons using Tukey's Honest Significant Difference test. The level of statistical significance was determined at p ≤ 0.05. MTA, when incorporated with TiF4, showed enhanced antibacterial properties. Results On day 1, the group treated with MTA containing 3% TiF4 demonstrated the strongest antibacterial effectiveness, with a mean of 4.67 ± 0.04 colony-forming units (CFU)/mL × 10^8. However, the group treated with plain MTA had the lowest mean values, at 5.67 ± 0.25 CFU/mL × 10^8. On day 1, the MTA group with 3% TiF4 also had the highest mean pH values (11.90 ± 0.05), while the plain MTA group had the lowest mean pH values (11.64 ± 0.78). On day 7, the MTA group with 3% TiF4 had the highest pH value (12.85 ± 0.08), whereas the plain MTA group had the lowest pH value (11.92 ± 0.09). Conclusion The inclusion of TiF4 resulted in an augmentation of the antibacterial efficacy of MTA against Enterococcus faecalis (E. faecalis). Hence, the integration of TiF4 into MTA can be considered a promising development against E. faecalis during endodontic procedures.

[The use of mineral trioxide aggregate for treatment of children with complications of dental trauma]

THE AIM

Jf the study was to assess the efficacy of mineral trioxide aggregate for treatment of children with complicated permanent teeth trauma.

MATERIAL AND METHODS

The study comprised 29 children aged 6-13 years (mean age 8.6±1.7 years) with 36 injured constant teeth, from which 30 had immature roots, 27 (75%) teeth had necrotic pulp at baseline examination, 12 (33.3%) teeth showed radiological signs of external imflammatory root resorbtion, 2 teeth were diagnosed with of the root fracture (5.6%). MTA was used for pulp regeneration procedure in 25 (69.5%) teeth, external closure of resorbtion site in 3 (8.3%) teeth, root canal filling in 4 (11.1%) teeth, apical plug creation in 4 teeth (11.1%). The patients were folowed up for 1 to 9 years.

RESULTS

From 36 teeth only one was extracted 9 years after regenerative endodontic procedure because of cervical root fracture. In 2 teeth with external imflammatory resorbtion progession of replacement resorption took place, in 1 tooth necrosis of regenerated pulp tissue occurred 2 years after the procedure because of restoration marginal seal failure. In 25 teeth favorable outcome was registered with stabilisation of external root resorbtion, continous root growth in 24 teeth and radioluscent lesions healing in 6 teeht showing them at baseline examination. Change of external imflammator root resorbtion to replacement resorption was detected in 1 teeth from 3 with external closure of resorbtion site. Root calan filling with MTA was performed in 3 avulsed teeth with replantation delayed for more than 1 day and in 1 tooth with root fracture. All teeth were clinically asymptomatic during more than 5 years follow-up. Favorable outcome was received in all cases of apicl plug formation.

CONCLUSION

MTA is highly effective for preservation of constant teeth in children with clinically complicated situations. In many cases with hopeless long-term prognosis for a teeth MTA allows stabilization of dental tissue level with the teeth being an object for guided tissue regeneration.

Multifunctional Lithium-Doped Mesoporous Nanoparticles for Effective Dentin Regeneration in vivo

Introduction

Effective infection control without irritating the pulp tissue is the key to successful vital pulp therapy. Developing a novel antibacterial biomaterial that promotes dentin regeneration for pulp capping is thus a promising strategy for enhancing vital pulp therapy.

Methods

Lithium-doped mesoporous nanoparticles (Li-MNPs) were synthesized using an alkali-catalyzed sol-gel method. The particle size, elemental distribution, surface morphology, pore structure, and ion release from Li-MNPs were measured. Human dental pulp stem cells (hDPSCs) and Streptococcus mutans (S. mutans) were used to evaluate the biological effects of Li-MNPs. In addition, a dental pulp exposure mouse model was used to evaluate the regenerative effects of Li-MNPs.

Results

Li-MNPs had a larger surface area (221.18 m2/g), a larger pore volume (0.25 cm3/g), and a smaller particle size (520.92 ± 35.21 nm) than MNPs. The in vitro investigation demonstrated that Li-MNPs greatly enhanced the biomineralization and odontogenic differentiation of hDPSCs through the Wnt/β-catenin signaling pathway. Li-MNPs showed a strong antibacterial effect on S. mutans. As expected, Li-MNPs significantly promoted dentin regeneration in situ and in vivo.

Conclusion

Li-MNPs promoted dentin regeneration and inhibited S. mutans growth, implying a possible application as a pulp capping agent in vital pulp therapy.

Comparative Evaluation of the Physical and Antimicrobial Properties of Mineral Trioxide Aggregate, Biodentine, and a Modified Fast-Setting Mineral Trioxide Aggregate Without Tricalcium Aluminate: An In Vitro Study

Background Tricalcium aluminate, one of the major constituents of mineral trioxide aggregate (MTA), has been shown to have cytotoxic properties. Mineral trioxide aggregate has moderate to low antimicrobial activity against the most common endodontic pathogen, Enterococcus faecalis. Aim To assess the physical and antimicrobial properties of a newly modified formulation of mineral trioxide aggregate. Materials & methods The final setting time, compressive strength, and antimicrobial properties were tested for three groups of materials. The material used for Group 1 was mineral trioxide aggregate (white MTA, Angelus, Londrina, Brazil); the material for Group 2 was Biodentine (Septodont, Saint Maur des Fossés, France); and for Group 3, a modified MTA formulation was used. Results Group 1 had the longest setting time, and Group 2 had the shortest setting time. Group 3's material was set at 83.65 ± 0.28 minutes. This difference among the groups was statistically significant (p < 0.05). The highest mean compressive strength during all the time periods was seen in Group 2, followed by Group 3, and the least in Group 1. This difference in compressive strength was statistically significant (p=0.001). The largest zone of inhibition against Enterococcus faecalis, Candida albicans, and Streptococcus mutans was seen in Group 3, followed by Group 2 and Group 1. Conclusion Under the limitations of the present study, the newly modified MTA could serve as an alternative to the conventional MTA in terms of faster setting, higher strength, and better antimicrobial properties.

Physicochemical, Biological, and Antibacterial Properties of Four Bioactive Calcium Silicate-Based Cements

Calcium silicate-based cement (CSC) is a pharmaceutical agent that is widely used in dentistry. This bioactive material is used for vital pulp treatment due to its excellent biocompatibility, sealing ability, and antibacterial activity. Its drawbacks include a long setting time and poor maneuverability. Hence, the clinical properties of CSC have recently been improved to decrease its setting time. Despite the widespread clinical usage of CSC, there is no research comparing recently developed CSCs. Therefore, the purpose of this study is to compare the physicochemical, biological, and antibacterial properties of four commercial CSCs: two powder-liquid mix types (RetroMTA^® [RETM]; Endocem^® MTA Zr [ECZR]) and two premixed types (Well-Root™ PT [WRPT]; Endocem^® MTA premixed [ECPR]). Each sample was prepared using circular Teflon molds, and tests were conducted after 24 h of setting. The premixed CSCs exhibited a more uniform and less rough surface, higher flowability, and lower film thickness than the powder-liquid mix CSCs. In the pH test, all CSCs showed values between 11.5 and 12.5. In the biological test, cells exposed to ECZR at a concentration of 25% showed greater cell viability, but none of the samples showed a significant difference at low concentration (p > 0.05). Alkaline phosphatase staining revealed that cells exposed to ECZR underwent more odontoblast differentiation than the cells exposed to the other materials; however, no significant difference was observed at a concentration of 12.5% (p > 0.05). In the antibacterial test, the premixed CSCs showed better results than the powder-liquid mix CSCs, and ECPR yielded the best results, followed by WRPT. In conclusion, the premixed CSCs showed improved physical properties, and of the premixed types, ECPR exhibited the highest antibacterial properties. For biological properties, none of these materials showed significant differences at 12.5% dilution. Therefore, ECPR may be a promising material with high antibacterial activity among the four CSCs, but further investigation is needed for clinical situations.

The antibacterial activity of mineral trioxide aggregate containing calcium fluoride

Background/purpose

Because complete microbial elimination of the infected root canal system is nearly impossible to achieve, the use of root canal fillings with antibacterial effects may help to minimize intracanal infections. Our previous study, MTA modified by CaF₂ addition, improved the biocompatibility and mineralization potential of human dental pulp cells without adverse effect on the physical properties. In this study, the antibacterial effect of MTA after CaF₂ addition was evaluated for use as a root canal sealer. The objective of this study was to evaluate the antibacterial activity of MTA after the addition of CaF₂.

Materials and methods

The antibacterial activities of MTA and MTA–CaF₂ mixture against Enterococcus faecalis (E. faecalis), Porphyromonas endodontalis (P. endodontalis), and Porphyromonas gingivalis (P. gingivalis) were investigated with MTA-CaF₂ powder and eluates. The bacterial growth was measured by optical density using a spectrophotometer and the bacterial colony counting.

Results

MTA inhibited the growth of E. faecalis, P. endodontalis, and P. gingivalis, and the addition of CaF₂ improved this antibacterial effect in a concentration dependent manner (p < 0.05). E. faecalis was more resistant to MTA-CaF₂ than the other groups of bacteria.

Conclusion

The addition of more than 5% CaF₂ to MTA can increase the antibacterial activity.

Biological properties of lithium-containing surface pre-reacted glass fillers as direct pulp-capping cements

OBJECTIVE

Surface pre-reacted glass fillers (S-PRG) can release different types of ions and in our previous study, we modified these fillers with lithium chloride (S-PRG/Li-100 mM) to induce reparative dentin formation by activating the Wnt/β-catenin signaling pathway. Here, we assessed the biological performance of S-PRG/Li-100 mM and compared it with that of mineral trioxide aggregate (MTA) and S-PRG without additives.

METHODS

In vivo studies were conducted on male Wistar rats using Masson's trichrome staining in pulp-capped molars. The test materials were implanted subcutaneously to evaluate their capacity for vascularization and biocompatibility. The ability of the test materials to form apatite was tested by immersing them in simulated body fluid. Rhodamine-B staining was conducted to assess their sealing ability in bovine teeth, while their antibacterial activity was evaluated against Streptococcus mutans and Lactobacillus casei in terms of colony-forming units and by live/dead staining.

RESULTS

Masson's trichrome staining and tissue-implantation tests confirmed the biocompatibility of S-PRG/Li-100 mM and it was similar to that of MTA and S-PRG; inflammation regression was observed 14 days after operation in the subcutaneous tissues. S-PRG/Li-100 mM promoted the formation of apatite on its surface. Both the S-PRG groups showed higher sealing capability and bactericidal/bacteriostatic activity against oral bacterial biofilms than MTA.

SIGNIFICANCE

Lithium-containing surface pre-reacted glass cements exhibit better antibacterial and sealing capabilities than MTA, suggesting their potential as high-performance direct pulp-capping materials.

Chitosan Enhances the Anti-Biofilm Activity of Biodentine against an Interkingdom Biofilm Model

Endodontic infection is a biofilm disease that is difficult to irradicate with current treatment protocols, and as such, persistent micro-organisms may lead to ongoing or recurrent disease. The potential for the use of enhanced filling materials to modify biofilm regrowth is a promising strategy. This current study aimed to evaluate the anti-biofilm efficacy of calcium silicate cements modified with chitosan. The development of mono-species and multi-species biofilms on ProRoot MTA, Biodentine and bovine dentine discs were explored using quantitative microbiology analysis. The effect on regrowth of biofilms was assessed following the addition of chitosan to each cement. In comparison to a dentine substrate, both materials did not show the ability to inhibit biofilm regrowth. Biodentine incorporated with chitosan displayed a dose-dependent reduction in multi-species biofilm regrowth, unlike MTA. Notably, interkingdom biofilms were shown to enhance bacterial tolerance in the presence of chitosan. This study demonstrates the potential to enhance the antimicrobial properties of Biodentine. The findings highlight the need for appropriate model systems when exploring antimicrobial properties of materials in vitro so that interspecies and interkingdom interactions that modify tolerance are not overlooked while still supporting the development of innovative materials.

Vital Pulp Therapy in Primary Dentition: Pulpotomy-A 100-Year Challenge

Pulpotomy has long been the most indicated vital pulp procedure in primary molars with extensive caries. The success of a pulpotomy is highly technique sensitive and it depends upon many factors, such as diagnosis accuracy, caries excavation method, pulp dressing material, quality of the final restoration and operator experience. This paper provides an overview of the pulpotomy procedure in primary teeth over a century, with reference to advances in technique, medication and restoration possibilities and challenges and controversies surrounding the subject as well as future directions.

Recent Advances in Indirect Pulp Treatment Materials for Primary Teeth: A Literature Review

Aim

To provide an overview of the techniques of indirect pulp treatment (IPT) and the new materials used.

Background

Indirect Pulp Treatment (IPT) is a conservative treatment approach that can be used in primary molars. Pulpotomy has been adopted as the treatment of choice for deep caries in primary molars. IPT showed higher success rates in recent researches.

Materials and methods

Electronic search of English scientific papers was accomplished using PubMed, ScienceDirect, and Scopus. Papers published from 1995 to 2019 were included. Search terms used were recent advances, indirect pulp treatment, mineral trioxide aggregate (MTA), biodentine, TheraCal–LC, chlorhexidine gluconate (CHX), resin-modified glass ionomer (RMGI), and calcium hydroxide.

Review results

Seventy two papers were obtained from the electronic search and references of selected studies. Thirty five papers explained recent advances in IPT materials for primary molars. MTA produces more dentinal bridging with superior quality than calcium hydroxide. Similarly, Biodentine can form reparative dentin in a very short period. TheraCal–LC has increased stability and durability with strong physical properties and low solubility. Furthermore, CHX is a chemical disinfectant which can aid in increasing the success rate of IPT when conjugated with other materials. It produced highly successful IPT when combined with RMGI or calcium hydroxide.

Conclusion

IPT is the preferred treatment approach for preservation of primary dentition. CHX is an emerging material that can provide promising results in IPT when combined with other materials.

Clinical significance

Up to date, no material had replaced the popular use of calcium hydroxide in IPT. The use of CHX with RMGI can increase the success rate while preserving the advantages of the latter as it is considered the liner of choice for primary teeth, making IPT a suitable substitute for pulpotomy in primary molars.

How to cite this article

Saber AM, El Meligy OA, Alaki SM. Recent Advances in Indirect Pulp Treatment Materials for Primary Teeth: A Literature Review. Int J Clin Pediatr Dent 2021;14(6):795–801.

Preparation and properties of tristrontium aluminate as an alternative component of mineral trioxide aggregate (MTA) cement

This study evaluated tristrontium aluminate (S₃A) and its viability as a component for tricalcium silicate (C₃S) cements. The properties of S₃A, C₃S, and S₃A/C₃S mixtures were evaluated in terms of setting time, compressive strength, flowability, and radiopacity. X-ray diffraction (XRD) pattern verified the powder synthesized in the laboratory as S₃A, consequently, confirming the preparation method. S₃A exhibited the lowest setting time, followed by C₃S and S₃A/C₃S mixtures. Compressive strength of C₃S was significantly higher than S₃A. The S₃A/C₃S mixture showed comparable compressive strength to C₃S for 1-day post initial mixing. There was no significant difference in flowability between S₃A/C₃S and mineral trioxide aggregate (MTA). S₃A showed comparable radiopacity to MTA, whereas that of the S₃A/C₃S mixture was significantly lower comparatively; however, it achieved sufficient radiopacity (3 mm aluminum thickness equivalent). Further studies are needed to improve the manufacturing process of S₃A and evaluate the bioactive effect of strontium.

A Silk Fibroin Based Hydration Accelerator for Root Canal Filling Materials

Mineral trioxide aggregate (MTA) is widely used in various dental endodontic applications such as root-end filling, furcal perforation repair, and vital pulp therapy. In spite of many attempts to improve handling properties and reduce the discoloration of MTA, the ideal root canal filling material has yet to be fully developed. The objective of this study was to investigate the setting time, mechanical properties, and biocompatibility of MTA set by a silk fibroin solution. A 5 wt% silk fibroin (SF) solution (a novel hydration accelerant) was used to set SavDen® MTA and ProRoot® white MTA (WMTA). Changes in setting time, diametral tensile strength (DTS), material crystallization, in vitro cell viability, and cell morphology were assessed by Vicat needle measurement, a universal testing machine, scanning electron microscopy (SEM), and WST-1 assay, respectively. The initial setting time of ProRoot® MTA and SavDen® MTA experienced a drastic decrease of 83.9% and 42.1% when deionized water was replaced by 5 wt% SF solution as the liquid phase. The DTS of SavDen® MTA showed a significant increase after set by the SF solution in 24 h. A human osteoblast-like cell (MG-63)-based WST-1 assay revealed that both ProRoot® MTA and SavDen® MTA hydrated using SF solution did not significantly differ (p > 0.05) in cell viability. MG-63 cells with pseudopodia attachments and nuclear protrusions represent a healthier and more adherent status on the surface of MTA when set with SF solution. The results suggest that the 5 wt% SF solution may be used as an alternative hydration accelerant for MTA in endodontic applications.

Antimicrobial activity and pH measurement of calcium silicate cements versus new bioactive resin composite restorative material

Background

The purpose of this in vitro study is to compare the antimicrobial effect and pH of two calcium silicate cements Mineral trioxide aggregate high plasticity (Angelus PR, Brazil) and iRoot BP Plus (BioCeramix Inc., Vancouver, BC, Canada) and new bioactive restorative resin composite restorative material (ACTIVA, MA, Pulpdent, USA) against aerobic bacteria, strictly anaerobic bacteria and a yeast by using an agar diffusion test.

Methods

The materials were tested immediately after manipulation and were applied to the agar plates. Sodium hypochlorite (NaOCl) 5.25% was used as a positive control group. The dry filter paper acted as a negative control group for this study. The size of the inhibition zone for each material was measured after 12, 24 and 48 h. At the time of pH measurement; materials were prepared, crushed then dispersed in distilled water.

Results

The one-way Anova test revealed that iRoot BP Plus significantly showed superior antimicrobial efficacy compared to MTA-HP against the following species; Staphylococcus aureus, Streptococcus mutans, Enterococcus faecalis, Enterococcus faecium, Peptostreptococcus anaerobius and Candida albicans (P < 0.05). All of the tested materials did not show any antimicrobial effect against Porphyromonas gingivalis and Actinomyces israelii. The new bioactive resin composite material (ACTIVA) showed the least antimicrobial activity against the previously mentioned microorganisms except E. faecalis. NaOCl significantly showed the highest antimicrobial activity among the test group (P < 0.05). iRoot BP Plus was more alkaline (pH 12.1 ± 0.14/ 11.9 ± 0.25) in comparison to MTA-HP (pH 11.6 ± 0.16/ 11.2 ± 0.10) while ACTIVA was slightly acidic (pH 5.4 ± 0.09/ 6.5 ± 0.08).

Conclusions

According to the findings of this study, it was concluded that calcium silicate- based cements showed a potential antimicrobial activity mainly due to its high alkalinity. The new bioactive resin composite restorative material exhibits less antimicrobial activity due to its resinous ingredients and slightly acidic nature. Antimicrobial effect of calcium silicate cements against strictly anaerobic bacterial species is still questionable.

The in vitro antimicrobial activities of four endodontic sealers

Background

The purpose of this study was to investigate the antimicrobial activities of four endodontic sealers (GuttaFlow2, AH Plus, ProRoot MTA and RealSeal) against E. feacalis, E.coli and C.albicans.

Methods

The antimicrobial activities of four endodontic sealers were assessed by both agar diffusion test (ADT) and direct contact test (DCT) in this study. In ADT, the results were reported as the diameter of the growth inhibition zone. Both fresh and 1-day-setting sealers were measured. In DCT, microorganisms in suspension were exposed to the sealers for 10, 30 and 60 min and the survival of microorganisms were determined after exposure at different time points(after mixing, 1 and 7 days). The number of colony-forming unit (CFU) was counted. The results were analyzed with ANOVA and Tukey tests.

Results

Both ADT and DCT results showed that Guttaflow2 presented no effect against any tested microorganisms. In ADT, fresh RealSeal had the largest inhibition zone against all tested microbes, followed by AH Plus and ProRoot MTA. ProRoot MTA demonstrated inhibition zones against all the three test microbes after setting for 1 day, while the other three sealers showed no inhibition activity. In DCT, fresh AH Plus had the strongest antimicrobial effects against all the three tested microorganisms for every contact times, while its antimicrobial activity diminished significantly with time. Fresh RealSeal and ProRoot MTA also showed strong antimicrobial effect and still showed antimicrobial effect after 1-day-setting. The antibacterial effects of RealSeal against E. faecalis and antifungal effect of ProRoot MTA were observed after 7 days of setting.

Conclusions

GuttaFlow2 had no antimicrobial activity. Freshly mixed RealSeal and AH Plus demonstrated strong antimicrobial effects. RealSeal showed antimicrobial effects after setting in DCT. ProRoot MTA showed high antimicrobial activity and exhibited anti-inflammation potentials after setting.

Mineral Trioxide Aggregate Mixed with 5-Aminolevulinic Acid for the Photodynamic Antimicrobial Strategy in Hard Tissue Regeneration

Aminolevulinic acid (ALA) based photodynamic antimicrobial strategy can provide good antimicrobial effects and be used for medical applications. The aim of this study was to apply this strategy to Mineral Trioxide Aggregate (MTA), which is commonly used as a filling material for root endings and by doing so, to increase the bactericidal capability of MTA, as well as to investigate its characterization, cytocompatibility, and odontogenic differentiation potential. MTA is known to be a derivative of calcium silicate (CS). In this study, MTA specimens with or without ALA and light treatment were prepared. Diametral tensile strength values (DTS), setting durations, X-ray diffraction (XRD) spectra, apatite-mineralization, and antimicrobial abilities of the MTA, were also analyzed. Human dental pulp cells (hDPCs) can proliferate into the newly formed matrix and differentiate into odontoblasts to reinforce and strengthen the root. Levels of hDPCs proliferation and its odontogenic capabilities when cultured on MTA with ALA and light treatment, and the percentages of cells existing in the various cell cycle stages, were further evaluated in this study. The results indicated that MTA added ALA with light treatment had greater antibacterial ability and cytocompatibility, compared to MTA alone. A higher percentage S phase of the cells cultured on MTA added ALA with light treatment was observed. Furthermore, hDPCs cultured on MTA added ALA with light treatment had the highest expression levels of the odontoblastic differentiation markers. ALA has great antimicrobial efficiency and is a potential material for future medical applications. ALA-based photodynamic antibacterial strategy applied in the MTA has great antibacterial ability, cytocompatibility, and odontoblastic differentiation potential, and can facilitate the development of root canal treatment.

Do different strains of E. faecalis have the same behavior towards intracanal medications in in vitro research?

The aim of this study was to evaluate the antimicrobial action of different endodontic pastes against Enterococcus faecalis ATCC 29212, isolated from the urinary tract, and compare the action with E. faecalis ATCC 4083, isolated from the root canal. For this purpose, dentin blocks were infected for 21 days with both bacteria at different time-intervals to ensure there would be no cross contamination. After this period, blocks were immersed in the test medications for 7 days, according to the following groups: CH/S, CH/P, CH/CMCP, CH/CHX, CH/DAP and TAP. Images of the samples were captured with a confocal microscope and the percentage of live cells was computed by means of the Bioimage program. The ATCC 29212 strain was shown to be more resistant to CH/SS, Calen, CH/DAP, and TAP than the ATCC 4083 strain. The antimicrobial action of the medications against each strain were divergent concerning the order of susceptibility. The authors concluded that the strains behaved in a different manner: in general, those extracted from the urinary tract were more resistant to the tested medications. Therefore, when E. faecalis must be used for in vitro research in endodontics, we suggest the use of ATCC 4083 strain to obtain results that are closer to the clinical reality.

Antimicrobial Efficacy of Different Endodontic Sealers against Enterococcus faecalis: An In vitro Study

Objective

The aim of this in vitro study is to compare the antimicrobial efficacy of four different endodontic sealers against Enterococcus faecalis.

Material and Method:

Four different endodontic sealers, namely, resin based (AH Plus), zinc oxide-eugenol based (Tubliseal), calcium hydroxide based (Sealapex), and mineral trioxide aggregate (MTA Fillapex) based were tested for their antimicrobial efficacy against E. faecalis using agar diffusion method. Four wells were made by the removal of agar at equidistant points and filled with freshly mixed respective root canal sealers and were inoculated with E. faecalis. All the three plates were incubated for a period of 72 h at 37°C under aerobic conditions. The diameter of inhibition zones was measured at 24, 48, and 72 h time intervals. Data obtained were statistically analyzed using one-way analysis of variance and unpaired t-test.

Results:

All the tested sealers showed some bacterial growth inhibition of E. faecalis. Their efficacy in descending order of antibacterial activity was as follows: Sealapex > AH Plus > Tubliseal > MTA Fillapex. The efficacy of the root canal sealers decreased marginally with increase in their duration of action.

Conclusion:

Antimicrobial efficacy of calcium hydroxide-based sealer was highest followed by resin-based sealer and was the least with MTA based sealer.

Mineral trioxide aggregate enriched with iron disulfide nanostructures: an evaluation of their physical and biological properties

The purpose of this study was to characterize mineral trioxide aggregates (MTA) enriched with iron disulfide (FeS₂ ) nanostructures at different concentrations, and to investigate their storage modulus, radiopacity, setting time, pH, cytotoxicity, and antimicrobial activity. Iron disulfide nanostructures [with particle size of 0.357 ± 0.156 μm (mean ± SD)] at weight ratios of 0.2, 0.4, 0.6, 0.8, and 1.0 wt% were added to white MTA (wMTA). The radiopacity, rheological properties, setting time, and pH, as well as the cytotoxicity (assessed using the MTT assay) and antibacterial activity (assessed using the broth microdilution test) were determined for MTA/FeS₂ nanostructures. The nanostructures did not modify the radiopacity values of wMTA (~6 mm of aluminium); however, they reduced the setting time from 18.2 ± 3.20 min to 13.7 ± 1.8 min, and the storage modulus was indicative of a good stiffness. Whereas the wMTA/FeS₂ nanostructures did not induce cytotoxicity when in contact with human pulp cells (HPCs) and human gingival fibroblasts (HGFs), they showed bacteriostatic activity against Staphylococcus aureus, Escherichia coli, and Enterococcus faecalis. Adding FeS₂ nanostructures to MTA might be an option for improving the root canal sealing and antibacterial effects of wMTA in endodontic treatments.

In vitro antimicrobial effect of different root canal sealers against oral pathogens

Background and Purpose

Root canal therapy is the primary method for the treatment of an infected pulp in modern dentistry. The main aim of endodontic treatment is the elimination of bacteria and their products from infected root canals. In this study, we attempted to investigate the antimicrobial activity of three root canal sealers against oral pathogens.

Materials and Methods

The antimicrobial effectiveness of three endodontic sealers with different chemical compositions, namely resin (AH 26), zinc oxide eugenol (ZOE), and mineral trioxide aggregate (MTA), against Candida albicans, Streptococcus sanguis, Streptococcus salivarius, Streptococcus mutans, and Lactobacillus casei was assayed by agar well diffusion method (AWDM). The tested sealers were prepared according to the manufacturer's instructions and poured in the prepared wells of agar plates; diluted inocula (10⁵ and 10⁶ CFU/ml) of the tested microorganism strains were also used. The minimum inhibitory concentration (MIC) values of the selected canal sealers ranged between 3.12 and 50 mg.ml^-1 against the employed microorganism strains. All the plates were incubated at 37°C under anaerobic condition for bacteria and at 30°C for C. albicans. After three days, the inhibition zones were measured.

Results

In this investigation, AH 26 exhibited strong activity against C. albicans with the minimum inhibitory concentration of 12.5 mg.ml^-1, but ZOE and MTA did not act against C. albicans. ZOE sealer had the highest antimicrobial activity against the tested bacteria, while MTA showed the lowest antimicrobial activity.

Conclusion

The ascending sequence of microbial growth inhibition zones was as follows AH 26 > ZOE > MTA.

In vitro antimicrobial effect of different root canal sealers against oral pathogens

Background and Purpose:

Root canal therapy is the primary method for the treatment of an infected pulp in modern dentistry. The main aim of endodontic treatment is the elimination of bacteria and their products from infected root canals. In this study, we attempted to investigate the antimicrobial activity of three root canal sealers against oral pathogens.

Materials and Methods:

The antimicrobial effectiveness of three endodontic sealers with different chemical compositions, namely resin (AH 26), zinc oxide eugenol (ZOE), and mineral trioxide aggregate (MTA), against Candida albicans, Streptococcus sanguis, Streptococcus salivarius, Streptococcus mutans, and Lactobacillus casei was assayed by agar well diffusion method (AWDM). The tested sealers were prepared according to the manufacturer’s instructions and poured in the prepared wells of agar plates; diluted inocula (10⁵ and 10⁶ CFU/ml) of the tested microorganism strains were also used. The minimum inhibitory concentration (MIC) values of the selected canal sealers ranged between 3.12 and 50 mg.ml^-1 against the employed microorganism strains. All the plates were incubated at 37°C under anaerobic condition for bacteria and at 30°C for C. albicans. After three days, the inhibition zones were measured.

Results:

In this investigation, AH 26 exhibited strong activity against C. albicans with the minimum inhibitory concentration of 12.5 mg.ml^-1, but ZOE and MTA did not act against C. albicans. ZOE sealer had the highest antimicrobial activity against the tested bacteria, while MTA showed the lowest antimicrobial activity.

Conclusion:

The ascending sequence of microbial growth inhibition zones was as follows AH 26 > ZOE > MTA.

Antimicrobial activity of ProRoot MTA in contact with blood

Dental materials based on Portland cement, which is used in the construction industry have gained popularity for clinical use due to their hydraulic properties, the interaction with tooth tissue and their antimicrobial properties. The antimicrobial properties are optimal in vitro. However in clinical use contact with blood may affect the antimicrobial properties. This study aims to assess whether antimicrobial properties of the Portland cement-based dental cements such as mineral trioxide aggregate (MTA) are also affected by contact with blood present in clinical situations. ProRoot MTA, a Portland cement-based dental cement was characterized following contact with water, or heparinized blood after 1 day and 7 days aging. The antimicrobial activity under the mentioned conditions was assessed using 3 antimicrobial tests: agar diffusion test, direct contact test and intratubular infection test. MTA in contact with blood was severely discoloured, exhibited an additional phosphorus peak in elemental analysis, no calcium hydroxide peaks and no areas of bacterial inhibition growth in the agar diffusion test were demonstrated. ProRoot MTA showed limited antimicrobial activity, in both the direct contact test and intratubular infection test. When aged in water ProRoot MTA showed higher antimicrobial activity than when aged in blood. Antimicrobial activity reduced significantly after 7 days. Further assessment is required to investigate behaviour in clinical situations.

Evaluation of the Ca ion release, pH and surface apatite formation of a prototype tricalcium silicate cement

AIM

To evaluate the Ca²⁺ -releasing, alkalizing and apatite-like surface precipitate-forming abilities of a prototype tricalcium silicate cement, which was mainly composed of synthetically prepared tricalcium silicate and zirconium oxide radiopacifier.

METHODOLOGY

The prototype tricalcium silicate cement, white ProRoot MTA (WMTA) and TheraCal LC (a light-cured resin-modified calcium silicate-filled material) were examined. The chemical compositions were analysed with a wavelength-dispersive X-ray spectroscopy electron probe microanalyser with an image observation function (SEM-EPMA). The pH and Ca²⁺ concentrations of water in which the set materials had been immersed were measured, and the latter was assessed with the EDTA titration method. The surface precipitates formed on the materials immersed in phosphate-buffered saline (PBS) were analysed with SEM-EPMA and X-ray diffraction (XRD). Kruskal-Wallis tests followed by Mann-Whitney U-test with Bonferroni correction were used for statistical analysis (α = 0.05).

RESULTS

The prototype cement contained Ca, Si and Zr as major elemental constituents, whereas it did not contain some metal elements that were detected in the other materials. The Ca²⁺ concentrations and pH of the immersion water samples exhibited the following order: WMTA = prototype cement > TheraCal LC (P < 0.05). All three materials produced Ca- and P-containing surface precipitates after PBS immersion, and the precipitates produced by TheraCal LC displayed lower Ca/P ratios than those formed by the other materials. XRD peaks corresponding to hydroxyapatite were detected in the precipitates produced by the prototype cement and WMTA.

CONCLUSION

The prototype tricalcium silicate cement exhibited similar Ca²⁺ -releasing, alkalizing and apatite-like precipitate-forming abilities to WMTA. The Ca²⁺ -releasing, alkalizing and apatite-like precipitate-forming abilities of TheraCal LC were lower than those of the other materials.

Comparison of Two Base Materials Regarding Their Effect on Root Canal Treatment Success in Primary Molars with Furcation Lesions

Introduction. The aim of this study was to compare MTA with another base material, IRM, which is generally used on pulpal floor after root canal treatment, regarding their effect on the success of root canal treatment of primary teeth with furcation lesions. Materials and Methods. Fifty primary teeth with furcation lesions were divided into 2 groups. Following root canal treatment, the pulpal floor was coated with MTA in the experimental group and with IRM in the control group. Teeth were followed up considering clinical (pain, pathological mobility, tenderness to percussion and palpation, and any soft tissue pathology and sinus tract) and radiographical (pathological root resorption, reduced size or healing of existing lesion, and absence of new lesions at the interradicular or periapical area) criteria for 18 months. For the statistical analysis, Fisher's exact test and Pearson's chi-square tests were used and a p value of <0.05 was considered to be statistically significant. Results. Although there were no statistically significant differences between two groups in terms of treatment success, lesions healed significantly faster in the MTA group. Conclusion. In primary teeth with furcation lesions, usage of MTA on the pulpal floor following root canal treatment can be a better alternative since it induced faster healing.

Evaluation of Antibacterial Efficacy of MTA with and without Additives Like Silver Zeolite and Chlorhexidine

INTRODUCTION

Microorganisms, predominantly Enterococcus faecalis are found responsible in the progression of pulpal, periradicular diseases and in endodontic failures. Unsuccessful conventional treatment might necessitate the need for a surgical approach; where in retrograde restorative materials are used to seal the apex. Among the root end filling materials, Mineral Trioxide Aggregate (MTA) is considered biocompatible and is most commonly used in clinical applications but it has limited antibacterial activity. Metallic silver and chlorhexidine have been added into various dental materials to enhance the antibacterial activity.

AIM

This study aimed to compare the antibacterial effect of MTA, MTA mixed with silver zeolite and MTA mixed with chlorhexidine against Enterococcus faecalis.

MATERIALS AND METHODS

Test materials used in the study were divided into three groups namely Group 1- MTA, Group 2-MTA + Silver Zeolite, Group 3-MTA + Chlorhexidine. Direct contact test was done by placing a standardized suspension of Enterococcus faecalis on the test materials in a 96 well microtiter plate. The bacterial growth was measured spectrophotometrically using ELISA reader at intervals of one, three and seven days.

STATISTICAL ANALYSIS

Data was collected by recording the optical density and analyzed using two-way ANOVA and Tukey's multiple post hoc test followed by paired-t test.

RESULTS AND CONCLUSION

All test groups showed antibacterial activity against Enterococcus faecalis at day one, three and seven. MTA with silver zeolite showed the maximum antibacterial activity followed by MTA with 2% chlorhexidine. The least antibacterial effect was shown by MTA mixed with sterile water.

Effect of methods of evaluation on sealing ability of mineral trioxide aggregate apical plug

Aim:

The purpose of the study was to evaluate and compare the sealing ability of mineral trioxide aggregate (MTA) with three different methods.

Materials and Methods:

Forty single canal teeth were decoronated, and root canals were enlarged to simulate immature apex. The samples were randomly divided into Group M_D = MTA-angelus mixed with distilled water and Group M_C = MTA-angelus mixed with 2% chlorhexidine, and apical seal was recorded with glucose penetration method, fluid filtration method, and dye penetration methods and compared.

Results:

The three methods of evaluation resulted differently. The glucose penetration method showed that M_D sealed better than M_C, but difference was statistically insignificant (P > 0.05). The fluid filtration method resulted that Group M_C was statistically insignificant superior to Group M_D (P > 0.05). The dye penetration method showed that Group M_C sealed statistically better than Group M_D.

Conclusion:

No correlation was found among the results obtained with the three methods of evaluation. Addition of chlorhexidine enhanced the sealing ability of MTA according to the fluid filtration test and dye leakage while according to the glucose penetration test, chlorhexidine did not enhance the sealing ability of MTA. This study showed that relying on the results of apical sealing by only method can be misleading.

In vitro antibacterial activity of different pulp capping materials

Background

Direct pulp capping involves the application of a dental material to seal communications between the exposed pulp and the oral cavity (mechanical and carious pulp exposures) in an attempt to act as a barrier, protect the dental pulp complex and preserve its vitality. The aim of this study was to evaluate and compare, by the agar disc diffusion test, the antimicrobial activity of six different pulp-capping materials: Dycal (Dentsply), Calcicur (Voco), Calcimol LC (Voco), TheraCal LC (Bisco), MTA Angelus (Angelus), Biodentine (Septodont).

Material and Methods

Streptococcus salivarius, Streptococcus sanguis and Streptococcus mutans strains were selected to evaluate the antimicrobial activity by the agar disc diffusion test of different pulp capping materials. Paper disks were impregnated whit each pulp capping materials and placed onto culture agar-plates pre-adsorbed with bacterial cells and further incubated for 24 h at 37°C. The growth inhibition zones around each pulp capping materials were recorded and compared for each bacterial strain.

Results

For the investigation of the antibacterial properties the ANOVA showed the presence of significant differences among the various materials. Tukey test showed that MTA-based materials induced lower growth inhibition zones.

Conclusions

MTA-based products show a discrete antibacterial activity varying from calcium hydroxide-based materials which present an higher antibacterial activity.

Key words:Agar disc diffusion test, antimicrobial activity, calcium hydroxide, MTA, pulp capping materials.

Biological and chemical-physical properties of root-end filling materials: A comparative study

AIM

The purpose of the study is to evaluate and compare the biological and chemical-physical properties of four different root-end filling materials.

MATERIALS AND METHODS

Cytotoxicity towards murine odontoblasts cells (MDPC-23) was evaluated using the Transwell insert methodology by Alamar blue test. Streptococcus salivarius, S. sanguis, and S. mutans strains were selected to evaluate the antimicrobial activity by agar disc diffusion test. Solubility was determined after 24 h and 2 months. pH values were measured after 3 and 24 h. To evaluate radiopacity, all materials were scanned on a GE Healthcare Lunar Prodigy.

RESULTS

Excellent percentage of vitality were obtained by mineral trioxide aggregate (MTA)-based materials and Biodentine. MTA-Angelus, ProRoot MTA, and Intermediate Restorative Material (IRM) showed the highest values for the inhibition zones when tested for S. mutans, while Biodentine showed the largest inhibition zone when tested for S. sanguis. All the materials fulfilled the requirements of the International Standard 6876, demonstrating low solubility with a weight loss of less than 3%. No significant reduction in pH value was demonstrated after 24 h. ProRoot MTA and MTA-Angelus showed the highest values of radiographic density.

CONCLUSIONS

The differences showed by the root-end filling materials tested do not cover completely the ideal clinical requests.

Comparative cell attachment, cytotoxicity and antibacterial activity of radiopaque dicalcium silicate cement and white-coloured mineral trioxide aggregate

AIM

To comparatively examine the cell attachment, cytotoxicity, and antibacterial activity of radiopaque dicalcium silicate cement (RDSC) and ProRoot white-coloured mineral trioxide aggregate (WMTA).

METHODOLOGY

AlamarBlue was used for real-time and repeated monitoring of MG63 cell attachment on freshly mixed and set cements. The pH changes in the growth medium at different time-points were also measured. Cytotoxicity evaluation was performed according to ISO 10993-5 specifications. The antibacterial activity of the cement specimens was evaluated using Enterococcus faecalis.

RESULTS

There were no significant differences (P > 0.05) between the two cements for cell attachment either in the fresh groups or in the set groups at all culture times. Neither freshly mixed group nor set groups had significant pH differences. In the case of cytotoxicity, RDSC was significantly (P < 0.05) superior to WMTA at 12 and 24 h of incubation. RDSC and WMTA possessed similar antimicrobial activity, substantiated by the formation of growth inhibition zones and bacteriostasis ratio in E. faecalis strains.

CONCLUSIONS

The cell attachment, cytotoxicity and antibacterial efficacy of RDSC were comparable to those reported for ProRoot WMTA. The results of the current study suggest that this RDSC could be used as a root-end filling material and root sealer.

Cytocompatibility and antibacterial properties of capping materials

The aim of this study was to evaluate and compare the antimicrobial activity and cytocompatibility of six different pulp-capping materials: Dycal (Dentsply), Calcicur (Voco), Calcimol LC (Voco), TheraCal LC (Bisco), MTA Angelus (Angelus), and Biodentine (Septodont). To evaluate antimicrobial activity, materials were challenged in vitro with Streptococcus mutans, Streptococcus salivarius, and Streptococcus sanguis in the agar disc diffusion test. Cytocompatibility of the assayed materials towards rat MDPC-23 cells was evaluated at different times by both MTT and apoptosis assays. Results significantly differed among the different materials tested. Both bacterial growth inhibition halos and cytocompatibility performances were significantly different among materials with different composition. MTA-based products showed lower cytotoxicity and valuable antibacterial activity, different from calcium hydroxide-based materials, which exhibited not only higher antibacterial activity but also higher cytotoxicity.

The effects of incorporation of silver-zeolite on selected properties of mineral trioxide aggregate

The purpose of this study was to evaluate some physical and chemical properties of MTA incorporated with antibacterial silver zeolite (SZ). 0%, 0.2% or 2% mass fraction of SZ was added to MTA powder. The amounts of calcium released from the specimen in deionized water were measured with an atomic absorption spectrophotometer. The setting times of the samples were evaluated using Gilmore-type needles. For solubility and water absorption tests, the samples were placed in a cylindrical polystyrene-sealed container. At 7 days, the samples were removed from solutions and blotted dry for solubility and water absorption test. The highest calcium release was detected in 2% SZ MTA at 24 h. The addition of 2% SZ to MTA reduced the setting time statistically (p<0.05). 2% SZ MTA was significantly more soluble than MTA and 0.2 % SZ MTA (p<0.05). Further research is needed prior to clinical use of MTA with incorporated SZ.

In vitro evaluation of the minimum bactericidal concentrations of different root-end filling materials

AIM

The aim of this study was to evaluate the minimum bactericidal concentrations (MBC) of root-end filling materials ProRoot MTA, MTA Angelus and IRM.

MATERIALS AND METHODS

Macrodilution broth method was used. Microorganisms used were: Staphylococcus aureus (ATCC 29213), Enterococcus faecalis (ATCC 29212) and Streptococcus mutans. Serial two-fold dilutions of root-end filling samples were prepared in macrodilution tubes with concentrations ranging from 1/2 to 1/512. The samples dilutions were incubated for 24 hours. After incubation, 0.1 ml of diluted culture was inoculated onto the surface of supplemented sheep blood agar (Merck, Germany) and all plates were incubated at 37°C in aerobic condition for 24 hours. The MBC was defined as the lowest concentration of root-end filling samples where no growth was recorded.

RESULTS

MBC of both mineral trioxide aggregate (MTA) products against S. aureus were recorded as 15.62 mg/ml and for IRM 31.25 mg/ml MBC for both MTA groups against E. faecalis were recorded as 31.25 mg/ml and for IRM 62.5 mg/ml. MBC of all root-end filling samples against S. mutans were recorded as 62.5 mg/ml.

CONCLUSION

All tested root-end filling materials showed acceptable MBC against S. aureus and E. faecalis.

CLINICAL SIGNIFICANCE

All tested materials can be used safely for filling of a root-end cavity.

Effect of acid etching on marginal adaptation of mineral trioxide aggregate to apical dentin: microcomputed tomography and scanning electron microscopy analysis

The present investigation assessed the effect of acid etching on marginal adaptation of white- and gray-colored mineral trioxide aggregate (MTA) to apical dentin using microcomputed tomography (micro-CT) and scanning electron microscopy (SEM). Sixty-four extracted single-rooted human maxillary teeth were used. Following root-end resection and apical preparation, the teeth were equally divided into four groups according to the following root end filling materials: (i) white-colored MTA (WMTA), (ii) etched WMTA (EWMTA), (iii) gray-colored MTA (GMTA) and (iv) etched GMTA (EGMTA). After 48 h, the interface between root-end filling materials and the dentinal walls was assessed using micro-CT and SEM. Data were statistically analyzed using the Kruskal-Wallis and Dunn tests. Micro-CT analysis revealed gap volumes between the apical cavity dentin walls and EGMTA, GMTA, EWMTA and WMTA of (0.007 1±0.004) mm(3), (0.053±0.002) mm(3), (0.003 6±0.001) mm(3) and (0.005 9±0.002) mm(3) respectively. SEM analysis revealed gap sizes for EGMTA, WMTA, EWMTA and GMTA to be (492.3±13.8) µm, (594.5±17.12) µm, (543.1±15.33) µm and (910.7±26.2) µm respectively. A significant difference in gap size between root end preparations filled with GMTA and EGMTA was found (P<0.05). No significance difference in gap size between WMTA and EWMTA were found in either SEM or micro-CT analysis. In conclusion, pre-etching of apical dentin can provide a better seal for GMTA but not for WMTA.

pH and Antimicrobial Activity of Portland Cement Associated with Different Radiopacifying Agents

Objective. The aim of this study was to evaluate the antimicrobial activity and pH changes induced by Portland cement (PC) alone and in association with radiopacifiers. Methods. The materials tested were pure PC, PC + bismuth oxide, PC + zirconium oxide, PC + calcium tungstate, and zinc oxide and eugenol cement (ZOE). Antimicrobial activity was evaluated by agar diffusion test using the following strains: Micrococcus luteus, Streptococcus mutans, Enterococcus faecalis, Pseudomonas aeruginosa, and Candida albicans. After 24 hours of incubation at 37°C, inhibition of bacterial growth was observed and measured. For pH analysis, material samples (n = 10) were placed in polyethylene tubes and immersed in 10 mL of distilled water. After 12, 24, 48, and 72 hours, the pH of the solutions was determined using a pH meter. Results. All microbial species were inhibited by the cements evaluated. All materials composed of PC with radiopacifying agents promoted pH increase similar to pure Portland cement. ZOE had the lowest pH values throughout all experimental periods. Conclusions. All Portland cement-based materials with the addition of different radiopacifiers (bismuth oxide, calcium tungstate, and zirconium oxide) presented antimicrobial activity and pH similar to pure Portland cement.

The effect of various concentrations of iodine potassium iodide on the antimicrobial properties of mineral trioxide aggregate--a pilot study

BACKGROUND

Mineral trioxide aggregate (MTA) is a multi-purpose dental material with various uses in dentistry. Iodine potassium iodide (IKI) is the most commonly used iodine compound in endodontics. We aimed to assess the antimicrobial activity of tooth-colored ProRoot MTA combined with IKI.

MATERIALS AND METHODS

The antimicrobial activity of IKI was assessed at three concentrations (1%, 2%, and 4%) as the mixing agents combined with MTA against Enterococcus faecalis, Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. For each microorganism, three plates were inoculated with 100 μl of a microbial suspension (McFarland 0.5). Four wells were prepared in each plate. MTA (70 mg) was mixed with any of the three concentrations of IKI (25 μl) or sterile distilled water (25 μl) and placed in each well. The plates were incubated for 24 h at 37°C. Zones of inhibition (ZOI) were measured in millimeters by a blinded observer. Data were analyzed using analysis of variance and the Dunnett t-test.

RESULTS

All MTA mixtures with water or IKI solutions showed inhibitory zones. The mean ZOI of each MTA/IKI mixture was not significantly different from MTA/water mixture (P > 0.05). MTA/1% IKI had smaller ZOI than MTA/water against E. coli, E. faecalis, and C. albicans. MTA/2% IKI showed larger ZOI only against P. aeruginosa. MTA/4% IKI showed larger ZOI against P. aeruginosa and E. coli (P < 0.05).

CONCLUSIONS

Substitution of IKI solutions (1%, 2%, and 4%) for water did not significantly increase the antimicrobial activity of MTA.

Effect of internal matrices of hydroxyapatite and calcium sulfate on the sealing ability of mineral trioxide aggregate and light cured glass ionomer cement

Objective:

The present study was undertaken to evaluate the effect of hydroxyapatite (HA) and calcium sulfate (CS) on the sealing ability of mineral trioxide aggregate (MTA) and light cured glass ionomer cement (LC GIC) when used to repair furcation perforations.

Materials and Methods:

The study was conducted on 70 human molars. Sixty teeth with furcal perforations were randomly divided into six groups of 10 teeth each and repaired with MTA or LC GIC either alone or over an internal matrix, i.e., CS or HA. Access openings were filled with composite resin. Five teeth with unrepaired perforations were used as positive controls and five teeth without perforations were used as negative controls. The teeth were immersed in a solution of 2% methylene blue dye for 2 weeks. The samples were then sectioned and evaluated for linear dye leakage and analyzed statistically.

Results:

MTA showed the best sealing ability followed by LC GIC, MTA + CS, MTA + HA, LC GIC + CS and LC GIC + HA.

Conclusion:

Neither of the two internal matrices improved the sealing ability of the repair materials used.

Short-term antimicrobial properties of mineral trioxide aggregate with incorporated silver-zeolite

The purpose of this in vitro study was to determine whether adding silver-zeolite (SZ) to mineral trioxide aggregate (MTA) would enhance the antimicrobial activity of MTA against Staphylococcus aureus (ATCC #25923), Enterococcus faecalis (ATCC #29212), Escherichia coli (ATCC#25922), Pseudomonas aeruginosa (ATCC #27853), Candida albicans (ATCC #90028), Porphyromonas gingivalis (ATCC #33277), Actinomyces israelii (ATCC #12102), and Prevotella intermedia (ATCC# 15032). SZ was added at 0.2% and 2% mass fraction concentration to MTA powder. The control group was MTA powder with no SZ. The antimicrobial effect test was accomplished by placing freshly mixed MTA specimens on agar plates inoculated with microorganisms and comparing the zones of inhibition at 24, 48, and 72 h. The amounts of silver ion release from MTA specimens were measured with atomic absorption spectrophotometry at 10-min, 24-, 48-, and 72-h periods. The pH of MTA specimens was measured with a pH meter at 10-min, 24-, 48-, and 72-h periods. MTA with 2% and 0.2% SZ specimens showed inhibitory effects on some microorganisms at all time periods, whereas no antimicrobial activity showed for P. intermedia and A. israelii. MTA without SZ inhibited C. albicans, E. Coli, and P. intermedia. The highest silver release was detected in 2% SZ MTA at 24 h. The incorporation of SZ may enhance the antimicrobial activity of MTA.

"MTA"-an Hydraulic Silicate Cement: review update and setting reaction

OBJECTIVES

To review the current status and understanding of Portland cement-like endodontic materials commonly referred to by the trade designation "MTA" (alias "Mineral Trioxide Aggregate"), and to present an outline setting reaction scheme, hitherto unattempted.

METHOD

The literature was searched using on-line tools, overlapping an earlier substantial review to pick up any omissions, including that in respect of ordinary Portland cement (OPC), with which MTA shares much. The search was conducted for the period January 2005 to December 2009 using 'MTA', 'GMTA', 'WMTA', and 'mineral AND trioxide AND aggregate' as keywords, with various on-line search engines including ScienceDirect (http://www.sciencedirect.com), SAGE Journals Online (http://online.sagepub.com), Wiley Online Library (http://onlinelibrary.wiley.com), SciELO Scientific electronic library online (http://www.scielo.br/scielo.php), JSTOR (http://www.jstor.org), and Scopus (http://www.scopus.com). References of articles found were cross-checked where appropriate for missed publications. Manufacturers' and related websites were searched with Google Search (http://www.google.com.hk).

RESULTS

A generic name for this class of materials, Hydraulic Silicate Cement (HSC), is proposed, and an outline reaction scheme has been deduced. HSC has distinct advantages apparent, including sealing, sterilizing, mineralizing, dentinogenic and osteogenic capacities, which research continues to demonstrate. However, ad hoc modifications have little supporting justification.

SIGNIFICANCE

While HSC has a definite place in dentistry, with few of the drawbacks associated with other materials, some improvements in handling and other properties are highly desirable, as are studies of the mechanisms of the several beneficial physiological effects. Reference to the extensive, but complex, literature on OPC may provide the necessary insight.

The antimicrobial activity of gray-colored mineral trioxide aggregate (GMTA) and white-colored MTA (WMTA) under aerobic and anaerobic conditions

OBJECTIVE

The objective of this study was to test the hypothesis that the antimicrobial activity of gray-colored MTA (GMTA) and white-colored MTA (WMTA) is related to the induction of reactive oxygen species (ROS).

STUDY DESIGN

In vitro antimicrobial activity of MTA was carried out using E. coli mutant (AB2463-RecA13), triple mutant (BW535), and wild type (AB1157). The diffusion method on Müller-Hinton agar (MHA) was used. A base layer was made using MHA agar and 4 wells were made by removing agar at equidistant points. MTA was placed into the wells immediately after manipulation. The plates were incubated at 37 degrees C for 48 hours under aerobic and anaerobic conditions. Afterward the zones of inhibition were measured. Also the damage caused to the plasmid DNA in the presence of the cement was evaluated through 0.8% agarose gel electrophoresis.

RESULTS

It was possible to observe a zone of inhibition under aerobic conditions promoted by both cements on both of the mutant E. coli but not in the wild-type E. coli. On the other hand, both cements were not able to induce any bacterial inhibition under anaerobic conditions, suggesting that the inhibitory action is a result of ROS production. Both cements promoted damage in the DNA plasmid when compared with distilled water (control).

CONCLUSION

We concluded that MTA under aerobic conditions provoked antimicrobial activity by induction of ROS. Furthermore, the antimicrobial activity occurred by damage caused directly to the bacterial DNA.