Nonvital tooth bleaching: a review of the literature and clinical procedures

Tooth whitening: current status and prospects

As a safe, effective, economical, and convenient technique, tooth whitening is one of the most popular treatments for improving tooth discoloration. This review summarizes the theoretical and recent research developments in the classification and mechanisms of tooth discoloration, as well as the principles, agents, effects, and side effects of tooth whitening techniques. The aim is to provide a basis for the clinical treatment of tooth whitening techniques and to suggest possible new ideas for further research. The accepted mechanism of whitening is the redox reaction of oxides in the whitening reagent, and the whitening effect is remarkable. However, side effects such as tooth sensitivity and irritation of gum and other oral soft tissues can still occur. It is recommended that more monitoring be carried out in the clinic to monitor these side effects, and care should be taken to protect the soft tissues in the mouth during office whitening procedures. Furthermore, there is a need to develop new additives or natural whitening products to reduce the occurrence of side effects.

Endodontic Treatment of a Maxillary Incisor Tooth in a Chimpanzee (Pan troglodytes)

Chimpanzees (Pan troglodytes) with teeth severely damaged by dental caries and/or periodontal disease are often managed with medication and/or tooth extraction. A common endodontic treatment for severely decayed teeth in a 26-year-old female chimpanzee is reported. The left maxillary central incisor tooth had lost its crown, probably due to trauma that was not recent, and it had a fistula most likely due to chronic apical periodontitis. The diagnosis was confirmed radiographically before treatment. To treat the infected root canal, endodontic treatment used in humans was adapted for a chimpanzee. After the treatment, the tooth was sealed using an adhesive resin composite. At 11-years post-treatment, there were no signs of recurrence of the lesion or of failure of the tooth seal. The results of this case report suggest that common endodontic treatments used in humans are also effective in chimpanzees.

Effects of alpha-tocopherol antioxidant on fracture strength and adhesion of endodontically treated teeth restored after dental bleaching

This study evaluated the effect of different concentrations of alpha-tocopherol in gel form on fracture strength, hybrid layer formation, and microtensile bond strength of endodontically treated teeth bleached with 40% hydrogen peroxide (H2 O2 ). Sixty bovine incisors were randomized into one of six groups (n = 10 incisors per group) defined by the interventions carried out after endodontic treatment. In the control group, no additional intervention was carried out, while all teeth in the five intervention groups were bleached with 40% H2 O2 and subsequently treated with alpha-tocopherol at concentrations of 15% (15AT), 20% (20AT), or 25% (25AT), with 10% sodium ascorbate (10SA), or with nothing (40HP). Fracture strength was evaluated in a mechanical testing machine, hybrid layer formation was assessed using scanning electron microscopy, and bond strength was determined using microtensile bond-strength testing. Data were analyzed using Kruskal-Wallis and Dunn's tests. No statistically significant difference regarding fracture strength was observed among groups. Hybrid layer formation was greater in the 15AT group than in groups 40HP and 10SA. Teeth in groups 15AT, 20AT, and 25AT demonstrated higher bond strength than teeth in groups 40HP and 10SA. Alpha-tocopherol, preferably at 15%, effectively reverses the deleterious effects, of bleaching, on hybrid layer formation and bond strength to dentin.

Investigating the Effect of Internal Bleaching With 10% Carbamide Peroxide on the Color Change of Three Types of Common Endodontic Sealers

Background and purpose Color change caused by materials used for endodontic treatment is an important clinical issue. The current research examined the impact of internal bleaching with 10% carbamide peroxide on discolored teeth resulting from various types of sealers. Materials and methods In this study, 36 anterior teeth were cut from 1 mm beneath the cementoenamel junction (CEJ), and the samples were divided into three groups of 12. Then, AH26 (Tulsa Dental, Tulsa, OK), Endofill (Herpo Produtos Dentários Ltda, Petrópolis, Brazil), and AH Plus (Dentsply DeTrey, Konstanz, Germany) color change potential sealers were placed inside the pulp chamber. The cervical access cavity was covered with a thin layer of glass ionomer. After one month, the material was removed, and bleaching was done with 10% carbamide peroxide. The color of the samples was measured by a spectrophotometer before bleaching, one week after bleaching, and one week after bleaching again. The data were subjected to statistical analysis using the Statistical Package for Social Sciences (SPSS) software version 16 (IBM SPSS Statistics, Armonk, NY), with a significance level set at P<0.05. Results The results showed that the factor of time and material used and the opposing effect of these two on the amount of L and ΔE were statistically significant (P<0.05). After one to two weeks of internal bleaching, all groups showed some degree of reduction in sealer-induced discoloration. In addition, in all groups, the largest difference in L was related to the difference in L0 and L2 (before bleaching and one week after bleaching again), and the lowest difference was related to the difference in L0 and L1. Also, the highest ΔE(T0,T1) belonged to the Endofill group, and this significantly differed from the AH26 group. AH26 showed the lowest value of ΔE(T0,T1), and after two weeks, the ΔE of all groups was higher than the clinically observable limit. The highest ΔE(T2,T0) among the groups belonged to the Endofill group. The ΔE(T2,T0) of AH26 and Endofill was significantly higher than AH Plus. Among all ΔE values, the AH Plus group had the lowest values. Conclusion Color change caused by Endofill and AH26 sealers showed a better response to internal bleaching than the AH Plus sealer.

Clinical management of vital and non-vital discolored tooth preparation stump shades: A clinical case series

OBJECTIVE

Traditional and modern-day laboratory techniques can be used to mask vital and non-vital discolored teeth.

CLINICAL CONSIDERATIONS

Two clinical case reports are presented showing different treatment approaches to differing clinical scenarios of partial coverage veneer and full coverage crown restorations, respectively.

CONCLUSIONS

Feldspathic ceramics should be considered when customization of stump shade correction and equalization is required with minimum facial reduction with veneer restorations. Translucent zirconia (5 mol% Y2 O3 ) can be used to mask metal posts and core restorations on non-vital teeth using an opaquer material that is infused into the intaglio surface in the green state.

CLINICAL SIGNIFICANCE

Different clinical scenarios will present to the clinician in regard to discolored stump shades where understanding what laboratory material treatment options are available that will help guide definitive restoration types and ultimately tooth preparation design.

Effect of whitening toothpastes on the surface roughness and microhardness of human teeth-an in vitro study

OBJECTIVE

To determine the effect of whitening toothpastes on the surface roughness and microhardness of human teeth.

METHODOLOGY

Surface roughness was estimated using the Talysurf instrument, and microhardness was estimated using the Vickers hardness tester before and after the application of whitening toothpastes on mounted extracted human teeth.

RESULTS

In the activated charcoal group, there was a reduction in the surface roughness from 1.21 at baseline to 1.09 at 1 month and a further reduction to 1.02 at 3 months, which was found to be statistically significant. However, no statistically significant difference in surface roughness was found in the other toothpaste groups. With respect to microhardness, all 4 whitening toothpastes showed a statistically significant reduction in microhardness after 3 months of brushing. However, the reduction was significantly higher in group 2 and in group 4 compared to the others.

CONCLUSION

This study showed that whitening toothpaste containing activated charcoal significantly reduced the surface roughness, whereas toothpastes with blue covarine and toothpastes containing activated charcoal significantly reduced the microhardness of the tooth.

CLINICAL RELEVANCE

This study emphasizes the need for healthcare professionals to be aware of the potential disadvantages of whitening toothpastes and make evidence-based decisions when recommending the product to patients.

An in vitro comparative evaluation of intraorifice barriers and bleaching agents on the fracture resistance of the endodontically treated anterior teeth

Aim

This study aimed to evaluate and compare the impact of different bleaching agents on the fracture resistance of endodontically treated teeth when using either GC Fuji type 2 glass ionomer cement (GIC) or Shofu Glass Ionomer RX EASE as intraorifice barriers (IOB).

Materials and Methods

A total of 80 single-rooted human maxillary central incisors were prepared and obturated. Three millimeters of gutta-percha was then removed from the orifice. The specimens were divided into two primary groups based on the type of IOB material used: GC Fuji type 2 GIC and Shofu Glass Ionomer RX EASE (n = 40). Each group was further divided into four subgroups based on the bleaching agent used: Carbamide peroxide (CP) 37%, sodium perborate (SP), hydrogen peroxide (HP) 35%, and distilled water used as the control (n = 10). The teeth were subjected to fracture resistance testing.

Results

The study found that the order of root fracture resistance was control > CP > SP > HP. There was no statistically significant difference in fracture resistance between GC Fuji type 2 GIC and Shofu Glass Ionomer RX EASE when used as IOB materials.

Conclusion

The study concluded that the choice of bleaching agent significantly affects the fracture resistance of endodontically treated teeth. It was observed that fracture resistance is lowest with HP, followed by SP and CP. Both GC Fuji type 2 Glass Ionomer and Shofu Glass Ionomer RX EASE are effective as IOB.

Spectrophotometric Analysis of Coronal Discoloration In Vitro Induced by Bioceramic Cements

The aim of this study was to evaluate and quantify, in vitro, the extent of coronal discoloration induced by bioceramic materials over time. In total, 44 human monoradicular teeth were divided into four groups (n = 11), according to the applied material: Negative control (NC); White MTA ProRoot^® (WMTAP); Biodentine^™ (BD); and TotalFill^® BC RRM^™ Putty (TF). Teeth were immersed in saline solution and incubated at 37 °C; the following periods of time were defined: before incubation: [t0]-without bioceramic material, t1-immediately after the bioceramic material placement; after incubation: t24h-24 h, t7d-7 days, and 30d-30 days. Descriptive and inferential statistical analysis were performed. Cochran's Q test was used to evaluate coronal discoloration across the different groups, while the Kruskal-Wallis test was employed to determine differences in discoloration among the groups at each time interval. Additionally, the Friedman test was applied to analyze the variations in discoloration within each group over time. A significance level of 5% was set. All experimental groups revealed coronal discoloration over time: NC (p = 0.001), WMTAP (p < 0.001), BD (p = 0.001), and TF (p = 0.006). No significant differences were observed between groups for each time interval (p > 0.05). The WMTAP group varied the most considering the intervals [t0-t1] and [t24h-t7d] (p = 0.037) compared to the remaining experimental groups.

Intracoronal tooth bleaching - A review and treatment guidelines

Intracoronal bleaching is a minimally invasive procedure that was introduced into dentistry in the 19th century. The role of that procedure in enhancing the colour of teeth subjected to internal discolouration while being conservative made it extremely popular amongst dental professionals. Different materials and techniques have been utilized over the years attempting to obtain predictable long-term results while minimizing any associated risks. Contemporarily, bleaching agents are mainly based on peroxide-releasing compounds in different formulations and delivery systems. Different theories have been formulated on the bleaching mechanism of such agents, but the exact mechanism is yet to be proven. The effect of hydrogen peroxide-based bleaching agents on the organic structure of enamel and dentine has been extensively investigated to address the effects of bonding of resin-based restorative materials to hard tooth structure. Multiple case reports raised a concern about the contribution of intracoronal bleaching in developing invasive root resorption. Modification of intracoronal bleaching techniques was thus necessary to address such concerns. This review will provide a summary of the important aspects of intracoronal bleaching, focusing on how it applies to the contemporary clinical setting. © 2023 Australian Dental Association.

Evaluating the Effect of Different Intra-Orifice Barriers and Various Bleaching Agents on the Fracture Resistance of Teeth After the Walking Bleach Procedure: An In Vitro Study

Objective This study aimed to evaluate the effect of three different commercially available intra-orifice barriers and bleaching agents on root canal-treated teeth. Materials and methods Forty-five freshly extracted single-rooted incisors, canine, and premolars were collected and stored in 10% formalin. Root canal procedures were performed on the extracted teeth and these were classified into three groups and three subgroups (n=5). Group 1: resin-modified glass ionomer cement (RMGIC); placed at the level of cemento-enamel junction (CEJ) and cured for 20 seconds. Group 2: Biodentin^TM (Septodont Ltd., Saint Maur des Fausse´s, France); powder and liquid were mixed according to the manufacturer's instructions and placed at the level of CEJ, and waited for 15 minutes to set. Group 3: bulk-fill composite; placed at the level of CEJ. Group A was treated with 35% carbamide peroxide (Ultradent Opalescence 35% PF regular). Group B was bleached with 35% hydrogen peroxide (Pola Office). Group C, which was the control group, was treated with distilled water. The bleaching procedure was repeated once every seven days for a period of three weeks. After bleaching, every sample was sectioned 2 mm above the level of CEJ to remove the crown. Auniversal testing machine (UTM) was used for the evaluation of the fracture resistance of teeth. Data were analyzed for significance by using analysis of variance (ANOVA) and further pair-wise comparison was performed by pos-hoc analysis. The level of significance was set at p<0.05 Results There was a significant difference between the fracture resistance of the three materials when bleached using distilled water (p<0.05). The fracture resistance of Group 3 was significantly greater than that of Group 2 and Group 1 (p<0.05). The difference in the fracture resistance between Group 1 and Group 2 was nonsignificant (p>0.05). Conclusion Walking bleach performed via bleaching agents 35% carbamide peroxide and 35% hydrogen peroxide leads to a reduction in the fracture resistance of endodontically treated teeth; 35% hydrogen peroxide causes more fracture resistance reduction than carbamide peroxide of the same concentration. The presence of intra-orifice barriers leads to greater fracture resistance and reinforcement of endodontically treated teeth that undergo the walking bleach procedure. Bulk-fill composite can be used as an intra-orifice barrier with good fracture resistance.

Susceptibility to discoloration of dental restorative materials containing dimethacrylate resin after bleaching

The aim of this study is to compare the susceptibility to discoloration of dental restorative materials containing dimethacrylate resin after bleaching. In this study, resin-modified glass ionomer, polyacid-modified composite resin, giomer, posterior composite resin, anterior composite resin, bulk fill composite resin, flowable bulk fill composite resin, ormocer, indirect composite resin and hybrid ceramics were used as restorative material containing dimethacrylate resin. 20 samples were prepared from each material in accordance with the manufacturer's instructions. After the baseline colors are measured, the samples were randomly divided into four subgroups as office bleaching, home bleaching and a separate control group for each type bleaching method. Then, the samples were bleached and colored. Color measurements of the samples were repeated after exposure to bleaching and coloring. Then, ΔE00 and whiteness index (WID) were calculated. Data were analyzed using Paired-Samples T Test, two-way ANOVA, Repeated Measures ANOVA and Tukey post-hoc tests. Statistical significance level was taken as p < 0.05. In terms of bleaching systems, Opalescence Boost was found to cause more whitening in materials but more discoloration (p < 0.05). In terms of materials, it was found that the most susceptible materials to coloration were Clearfil Majesty Posterior, Filtek Bulk Fill Posterior Restorative, Filtek Bulk Fill Flowable and Fuji II LC, while the least susceptible materials were CAD/CAM materials (p < 0.05). The bleaching process increases the susceptibility to coloration of materials containing dimethacrylate resin.

Impact of different intraorifice barriers on fracture resistance of non-vital bleached teeth

Background and Aim

This study aimed to evaluate the effects of bleaching agents on the fracture resistance of endodontically treated teeth using different intraorifice barrier (IOB) materials.

Materials and Methods

The endodontic treatment was performed for 160 mandibular premolars, and then, the teeth were divided into four groups according to the IOB: Ionoseal, Biodentine, ProRoot MTA, and TheraBase. Then, these teeth were subdivided into four subgroups (n = 10) based on the bleaching agents as distilled water (control), hydrogen peroxide 35% (HP), sodium perborate (SP), and carbamide peroxide 37% (CP). The access cavities were restored with composite resin after applying the bleaching agents for 7 days. The fracture resistance test was performed using a universal testing machine. Data were statistically analyzed, and the significance level was set at 5%. A scanning electron microscope was used to evaluate the effect of bleaching agents on the surfaces of IOBs.

Results

The highest fracture resistance values were observed in Biodentine groups with significant differences compared to Ionoseal and ProRoot MTA (P <.05). The distilled water groups showed significantly the highest fracture resistance compared to SP and HP groups (P <.05). There was no significant difference between SP, HP, and CP groups (P >.05). It was demonstrated that the morphological surface of the intact IOBs (control) was different from the surface of IOBs treated with bleaching agents.

Conclusion

The intracoronal bleaching procedures affected negatively the fracture resistance of the endodontically treated teeth.

Efficacy of organic and antioxidant agents to regain bond strength to bleached enamel in different dental adhesive solvents

Materials like carbamide peroxide or hydrogen peroxide are commonly used for vital teeth bleaching. However, there have been concerns regarding their effect on composite-to-bleached enamel bonding strength. The study investigated the impact of organic and antioxidant agents on composite bond strength in bleached enamel with different dental adhesive solvents. Human third molar teeth were sectioned into buccal and lingual halves. The two main adhesive solvent groups evaluated were acetone and alcohol. Each main group was divided into six groups. The positive control group received no bleaching, the negative control group consisted of bleaching with no surface deoxidization; and other experimental categories involved post-bleach treatments with 95% ethanol, sodium ascorbate (10%), acetone solution, or sodium fluoride solution (1.1%). Following the surface treatment and enamel bonding procedure, nano-hybrid composite cylinders measuring 3 × 2 mm were directly cured over the bleached enamel substrate. The shear bond test was performed after 24-h storage and 12,000 thermocycles on a universal testing machine. In this study, one-way ANOVA was used along with Tukey's HSD tests at a significance level of 0.05. The negative control groups showed significantly lower bond strength than the positive control group. Ethanol surface treatment had superior mean bonding strength in acetone and alcohol-based adhesive solvent groups. The utilization of sodium ascorbate for surface treatment resulted in a significant enhancement of adhesion between the composite material and bleached enamel surface. Sodium fluoride application showed no significant recovery in shear bond strength in both dental adhesive groups. It was concluded that hydrogen peroxide severely compromised the immediate bond strength of composite resin. Surface treatment of bleached enamel with ethanol, sodium ascorbate, and acetone solutions is an effective option for restoring bond strength.

Clinical Testing of Walking Bleach, In-Office, and Combined Bleaching of Endodontically Treated Teeth

Objective. The causes of internal posteruptive discoloration of teeth are bleeding, necroses, infections, and endodontic filling materials. The aim of this study was to establish the results of bleaching endodontically treated teeth using walking bleach, in-office, and combined techniques, using 30% carbamide peroxide and 35% hydrogen peroxide, as well as the effect of etiological factors, and the time elapsed after endodontic treatment on the success of bleaching. Materials and Methods. The research involved 30 endodontically treated teeth in healthy patients. Retroalveolar X-rays were taken to check the quality of root canal obturation. Endodontic treatment and obturation were carried out on the discolored non-vital teeth without any previous endodontic treatment. Before bleaching, two millimeters of the filling were removed from the root canal and the very entry into the canal was protected with glass ionomer cement. The teeth were divided into three groups, depending on the bleaching technique: walking bleach technique (10 patients), in-office technique (10 patients), and combined technique (10 patients). The teeth were bleached with 30% carbamide peroxide and 35% hydrogen peroxide. The bleaching procedure was repeated in all the patients three times. The color of all teeth was determined based on the Vita Classic guide before and after bleaching. The Χ2 square and Kruskal−Wallis tests were used to identify differences in teeth bleaching results. Results. A statistically significant difference (p < 0.05) was established between bleaching success and the time elapsed after endodontic treatment. There were no statistically significant differences observed between the bleaching success and etiological factors, bleaching techniques, or bleaching agents. Conclusions. The effectiveness of non-vital tooth bleaching is affected by the time elapsed after endodontic treatment.

Modern concepts of teeth whitening – a narrative review

Whitening has been known since Biblical times. Nowadays, in the developed world, patients are placing a stronger interest in the aesthetic appearance of their teeth. As a result, public demand for aesthetic dentistry, including tooth whitening, has recently increased. Aesthetics of the teeth is of great importance to many patients. The aim is to summarise and discuss the teeth whitening procedure, tools, materials, and methods, as well as its efficacy and safety. In addition, the paper aims to provide full and comprehensive information for dentists and their patients about the merits and perils of whitening. Methods. Relevant literature from Scopus published in English was selected using the following search criteria "tooth OR teeth AND whitening OR bleaching" by 2022. In total, there were found 3840 papers. Then, we applied the inclusion and exclusion criteria to the selected scientific papers to choose the relevant ones. Results. A comprehensive study of the available information related to means and products for teeth whitening was carried out. Whitening may be accomplished by the physical removal of the stain or a chemical reaction to lighten the tooth colour. The indications for appropriate use of tooth-whitening methods and products depend on the correct diagnosis of the discolouration. When used appropriately, tooth-whitening methods are safe and effective. Conclusions. Tooth whitening is a form of dental treatment and should be completed as part of a comprehensive treatment plan developed by a dentist after an oral examination.

Effectiveness of Teeth Whitening after Regenerative Endodontics Procedures: An In Vitro Study

Discolouration resulting from regenerative endodontic procedures may have a negative impact on the quality of life of treated patients; therefore, it is recommended to minimize this risk by selecting appropriate scaffolds and barrier materials, and if discolouration occurs, the use of a simple, cost-effective and minimally invasive technique, such as whitening, should be considered. This in vitro study aimed to evaluate tooth discolouration after two- and single-visit regenerative endodontic procedures and the effectiveness of subsequent whitening procedures with carbamide peroxide. Two hundred bovine incisors were included in this study and divided into twenty groups based on the tested material combinations. Two groups were control groups, one with saline and the other group with blood. In the 12 groups, the experiment was designed to be consistent with the two-visit regenerative endodontic procedures. Triple antibiotic paste or calcium hydroxide were placed in the root canal, and then scaffolds (e.g., blood or platelet-rich fibrin) and barrier materials (Biodentine, OrthoMTA or MTA Repair HP) were applied after rinsing the disinfectant pastes. In the six groups that corresponded to the single-visit regenerative endodontic procedure, the use of a disinfectant paste was omitted. Subsequently, the specimens were bleached twice with carbamide peroxide at a 7-day interval. Colour change measurements were performed using a spectrophotometer (VITA Easyshade Compact 5.0, VITA Zahnfabrik, Bad Säckingen, Germany). Statistical analysis was performed with the Kruskal−Wallis H test, the independent t-test and t-test for related samples. Tooth discolouration was noticed after two- and single-visit regenerative endodontic procedures, except for the platelet-rich fibrin+MTA Repair HP group. After the first and second whitening procedures, all of the tested two- and single-visit regenerative endodontic procedures groups showed a change in the colour of the crown, which was noticeable to the naked eye (∆E > 3.3). When analysing the ∆E value between the first and second bleaching procedures, no changes in the colour of teeth were visually noticed in the calcium hydroxide and platelet-rich fibrin +MTA Repair HP groups (∆E < 3.3). Single-visit regenerative endodontic procedures are suggested if possible; however, if two-visit regenerative endodontic procedures are performed, it is recommended to use calcium hydroxide as the disinfectant paste because of the lower staining potential. In the context of discolouration, platelet-rich fibrin is advisable for use as a scaffold. The whitening procedure is worth considering, but does not guarantee a return to the original tooth colour, especially when triple antibiotic paste is used.

Present status and future directions - Managing discoloured teeth

Managing tooth discolouration involves a range of different protocols for clinicians and patients in order to achieve an aesthetic result. There is an increasing public awareness in the appearance of their teeth and management of tooth discolouration may be inter-disciplinary and involve both vital and nonvital teeth. Vital teeth can be easily treated with low concentration hydrogen peroxide products safely and effectively using an external approach and trays. For endodontically treated teeth, the walking bleach technique with hydrogen releasing peroxide products is popular. However, there is an association with external cervical root resorption with higher concentrations of hydrogen peroxide of 30%-35%. There are also regulatory considerations for the use of hydrogen peroxide in certain jurisdictions internationally. Prosthodontic treatments are more invasive and involve loss of tooth structure as well as a life cycle of further treatment in the future. This narrative review is based on searches on PubMed and the Cochrane library. Bleaching endodontically treated teeth can be considered a safe and effective protocol in the management of discoloured teeth. However, the association between bleaching and resorption remains unclear although there is likely to be a relation to prior trauma. It is prudent to avoid thermocatalytic approaches and to use a base/sealer to cover the root filling. An awareness expectations of patients and multidisciplinary treatment considerations is important in achieving the aesthetic result for the patient. It is likely that there will be an increasing demand for aesthetic whitening treatments. Bleaching of teeth has also become increasingly regulated although there are international differences in the use and concentration of bleaching agents.

Effect of quercetin pretreatment on the immediate and aged bond strength of bleached dentin

This in vitro study aimed to investigate the effect of quercetin pretreatment on the bond strength of bleached dentin. Human dentin blocks (2 × 2 × 1 mm) were prepared and randomly divided into 5 groups (n = 16): deionized water pretreatment + no bleaching treatment (DNB); deionized water pretreatment + bleaching treatment (DYB); 75 μg/mL quercetin pretreatment + bleaching (Q75B); 150 μg/mL quercetin pretreatment + bleaching (Q150B); and 300 μg/mL quercetin pretreatment + bleaching (Q300B). The surfaces of superficial dentin (bonding surfaces) were treated with the respective solutions for 2 min, and then the surfaces opposite to the bonding surfaces (near pulp, bleaching surfaces) were subjected to bleaching treatment with 40% hydrogen peroxide (Ultradent, USA) for two 15-min sessions (groups DYB, Q75B, Q150B, and Q300B). After the bleaching procedure, the bonding surfaces were bonded with resin cements (Panavia V5, Kuraray, Japan). The bonded specimens were then divided into 2 subgroups (n = 8): the aging group (subgroup T), which was subjected to 10,000 thermocycles, and the nonaging group (subgroup N), which was not subjected to thermocycling. The microshear bond strength (μSBS) was obtained using a universal testing machine (AGS-X, Shimadzu, Tokyo, Japan). Additional dentin blocks (5 × 5 × 1 mm) were prepared and treated the same as the groups DYB, Q75B, Q150B, and Q300B (n = 8) to evaluate the color change, defined as groups CC_DYB, CC_Q75B, CC_Q150B, and CC_Q300B, respectively. Color evaluation was performed using a spectrophotometer (Vita Easyshade Advance 4.0, Vident, USA) to obtain a baseline and again at the end of the bleaching treatment. The data were analyzed via two-way analysis of variance (ANOVA) and Tukey's post-hoc test (α = 0.05). For the immediate bond strength, the specimens in the groups Q75B, Q150B, and Q300B showed significantly higher μSBS values than those in the group DYB (all P < 0.05). No significant differences in the μSBS values were found among the groups Q75B, Q150B, Q300B, and DNB, respectively (all P > 0.05). For the aged bond strength, both the groups Q150B and Q300B exhibited significantly higher μSBS values than groups DYB and DNB (all P < 0.05), whereas no significance differences were found between groups Q150B and Q300B (P = 1.00) or between the groups DYB and DNB (P = 1.00). No significant differences were observed in the △E values among all the groups tested (P = 0.80). Therefore, the application of quercetin for 2 min prior to the bleaching procedure preserved the immediate bond strength and improved the aged bond strength of bleached dentin while maintaining the effectiveness of bleaching.

Evaluation of the Effectiveness of Laser-Assisted Bleaching of the Teeth Discolored due to Regenerative Endodontic Treatment

Regenerative endodontic treatments (RETs) as a valuable treatment option to save the immature necrotic teeth, have been reported to be associated with discoloration which is an inevitable unfavorable outcome. The present study aimed to compare three laser-assisted protocols with conventional walking bleaching in terms of bleaching efficacy. Seventy-two human incisor teeth underwent regenerative treatment. A triple antibiotic paste containing minocycline, ciprofloxacin, and metronidazole was used as an intracanal medicament. A human blood clot was applied as a scaffold and capped by a hydraulic calcium silicate-based cement. Ten weeks after the RET procedure, a four-session bleaching course started. Teeth were assigned to four groups: (1) 35% hydrogen peroxide gel, (2) 35% hydrogen peroxide gel + Nd: YAG laser, (3) 35% hydrogen peroxide gel + 980 nm diode laser, and (4) 35% hydrogen peroxide gel + 810 nm diode laser. The color changes (ΔE) were measured before and after bleaching sessions. The data were analyzed using Kruskal-Wallis nonparametric test. The statistical significance level was set at 0.05. Significant discoloration, exceeding the perceptibility threshold (ΔE > 3.7) was observed in all of the samples ten weeks after RET. There was no significant difference between groups in terms of RET-induced discoloration values (p > 0.05). Bleaching either by using 35% hydrogen peroxide or 35% hydrogen peroxide activated by different lasers used in this study resulted in significant tooth whitening (p < 0.05). There was no statistically significant difference among the groups in terms of bleaching efficacy (p > 0.05). Internal bleaching by using 35% hydrogen peroxide is as effective as laser-assisted protocols for correction of crown discoloration in teeth that have undergone RET.

Class III Orthodontic Camouflage: Is the “Ideal” Treatment Always the Best Option? A Documented Case Report

Angle's Class III is one of the most complex malocclusions to treat. In nongrowing skeletal class III malocclusions, the choice between orthognathic surgery and camouflage treatment remains a challenge to the orthodontist. In class III borderline cases, clinicians are called to find the best compromise between functional and aesthetics outcomes, with the latter which often turns in avoiding worsening of profile characteristics, which makes the treatment of these patients quite challenging. This case report describes a borderline nongrowing patient with skeletal class III malocclusion, upper incisor proclination and spacing, lower crowding, and arch width discrepancy, which has already undergone previous orthodontic treatment. The orthodontic treatment involved the mandibular first premolar extraction, resulting in class I canine relation with good overjet and overbite as well as good arch coordination. The orthodontic camouflage improved the dental relationship with normalization of upper incisor inclination without a relevant retroclination of lower incisors; the skeletal facial pattern of the patient experienced a slight improvement. The tendency to skeletal class III has remained nearly unaffected. Treatment outcomes were stable after 1-year posttreatment follow-up.

The Potential of Trigona spp. Propolis as an Antioxidant Agent to Reduce Residual Peroxide after Intra-Coronal Bleaching Treatments

The present study aimed to determine the effectiveness of Trigona spp. propolis as an antioxidant to reduce residual peroxide after intra-coronal bleaching treatments. Thirty-five maxillary central incisors were divided into seven groups: five samples without antioxidants; sodium ascorbate 10% combined with Tween 80 0.2%; and Trigona spp. propolis 10%. The lengths of the application time were 1 h, 24 h, and 48 h. Each application time consisted of five samples. Root resection followed by artificial discoloration was performed in the samples. Then, intra-coronal bleaching using 35% hydrogen peroxide was applied. After the tooth color changed, the bleaching material was cleared, and this was followed by the applications of sodium ascorbate 10% combined with Tween 80 0.2% and Trigona spp. propolis 10%. The peroxide residue was measured by assessing dissolved oxygen using a titration analysis with either the Winkler or iodometric method. Data were analyzed using the ANOVA test and Tukey’s HSD test. The lowest peroxide residue amount was found with the application of antioxidants for 48 h after the intra-coronal bleaching treatment using 35% hydrogen peroxide. However, there was no significant difference between sodium ascorbate 10% combined with Tween 80 0.2% and Trigona spp. propolis 10% to reduce peroxide residues after the intra-coronal bleaching treatment (p > 0.05). Therefore, these findings indicate that Trigona spp. propolis 10% effectively reduces peroxide residues after intra-coronal bleaching treatments, which can interfere with the bond of the composite to the tooth surface and shorten the wait time for composite restorations after bleaching treatments.

Assessing the bleaching effect of an experimental stabilized chlorine dioxide agent used for internal bleaching purposes

Aim: Assessing the intracoronal bleaching effectiveness of an experimental chlorine dioxide product, based on the walking bleach technique. Methods: Extracted bovine incisors were artificially stained with bovine blood and filled with zinc phosphate cement at cementoenamel junction level. Teeth were divided into 3 groups (n=10): (SP) sodium perborate added with distilled water, (CD) chlorine dioxide and (C) control – dry cotton inserted into the pulp chamber. Bleaching agents were used at 0, 7 and 14 days. VITA Easyshadetm (ΔEab) was used to analyze tooth color at the 7th, 14th and 21st days, based on the CIE2000 system. Data were analyzed through ANOVA and Tukey’s test. Results: There were no statistically significant differences in Δb, ΔE, ΔE00 and ΔWID between CD and the control group. These parameters have shown significant differences between CD and SP, which differed from the control. However, they did not show significant differences either in the control group or in CD at the 7th, 14th and 21st days. Values recorded for SP at the 7th day differed from those recorded at the 14th and 21st days. Δa has shown differences within the same group at the 7th, 14th and 21st days. There was no difference between groups, when they were compared at the same day (7th and 14th). The control group differed from SP at the 21st day. CD did not differ from the other two groups. ΔL did not show differences between groups and times. Conclusion: Stabilized chlorine dioxide (0.07%, at pH 3.5) should not be used as intracoronal bleaching agent along with the walking bleach technique.

Evaluation of the penetration of intracoronal bleaching agents into the cervical region using different intraorifice barriers

Background

The present study aimed to make a comparison between the effects of 35% hydrogen peroxide gel (HP) and sodium perborate with distilled water (SP) bleaching agents on the sealing characteristics of glass ionomer cement (GIC), TheraBase, ProRoot MTA and Biodentine intraorifice barriers.

Methods

One hundred and twelve single-rooted mandibular human premolar teeth extracted from young patients (14–25 years) were chosen. Root cement and cementoenamel junction (CEJ) of teeth were examined under a stereomicroscope at 10 × magnification to ensure there was no cement defect or dentin gap in CEJ. After the endodontic access cavities were opened on the occlusal surfaces of the teeth, the working length was determined. Instrumentation of each root canal was performed with a ProTaper Gold rotary system in the determined working length and filled with gutta-percha + AH Plus with a single cone technique using. Root fillings were removed 3 mm short of the CEJ and sealed with one of the following intraorifice barrier materials (n = 30/group): 1. GIC; 2. TheraBase; 3. ProProot-MTA; 4. Biodentine. In each of the sub-groups, either HP or SP was used to perform intracoronal bleaching on days 1, 4, and 7. All outer surfaces of the specimens except the 3 mm cervical region were covered with nail polish and modeling wax layers. Specimens were immersed in a 5 ml Eppendorf tube that contained 2 mL of distilled water. The penetration of peroxide release was measured using the colorimetric ferric thiocyanate method. Statistical analysis of the data was performed with Three-way ANOVA and Tukey’s test (P = 0.05).

Results

In the HP groups, GIC showed the greatest peroxide release when compared with other tested groups on day 1 (P < 0.05). Biodentine and ProRoot MTA displayed a significantly lower peroxide leakage when compared to GIC and TheraBase on days 1 and 4 (P < 0.05). While GIC and TheraBase were used, HP observed higher peroxide penetration when compared with SP on days 1 and 4 (P < 0.05).

Conclusions

Peroxide diffusion was significantly influenced by the kind of intracoronal bleaching agents and intraorifice barrier materials used.

Copper Doped Carbon Dots for Addressing Bacterial Biofilm Formation, Wound Infection, and Tooth Staining

Oral infectious diseases and tooth staining, the main challenges of dental healthcare, are inextricably linked to microbial colonization and the formation of pathogenic biofilms. However, dentistry has so far still lacked simple, safe, and universal prophylactic options and therapy. Here, we report copper-doped carbon dots (Cu-CDs) that display enhanced catalytic (catalase-like, peroxidase-like) activity in the oral environment for inhibiting initial bacteria (Streptococcus mutans) adhesion and for subsequent biofilm eradication without impacting the surrounding oral tissues via oxygen (O₂) and reactive oxygen species (ROS) generation. Especially, Cu-CDs exhibit strong affinity for lipopolysaccharides (LPS) and peptidoglycans (PGN), thus conferring them with excellent antibacterial ability against Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli), such that they can prevent wound purulent infection and promoting rapid wound healing. Additionally, the Cu-CDs/H₂O₂ system shows a better performance in tooth whitening, compared with results obtained with other alternatives, e.g., CDs and clinically used H₂O₂, particularly its negligible enamel and dentin destruction. It is anticipated that the biocompatible Cu-CDs presented in this work are a promising nano-mouthwash for eliminating oral pathogenic biofilms, prompting wound healing as well as tooth whitening, highlighting their significance in oral health management.

Masking Ability of the Combined Application of Opaquers and Resin Composite on Discolored Backgrounds

The aim of this study was to evaluate the masking ability of a combined application of opaquers and resin composite over discolored backgrounds: A3, A3.5, C2, C3, and C4. The groups were divided according to the opaquer brand, the number of opaquer coats (one or two), and the thickness of the resin composite layer (0.5 or 1.0 mm). The color measurements were made by a reflectance spectrophotometer (SP60, EX-Rite). The color difference between the opaquer + resin composite + background and a reference background was calculated using the CIEDE2000 formula. ANOVA and Tukey's post hoc test (α=0.05) were used to analyze the ΔE00 mean values. A bivariate analysis was used to determine the association between dependent and independent variables. The masking ability was rated by the ΔE00 visual thresholds of acceptability and perceptibility (Excellent Match: ΔE00 ≤ 0.8; Acceptable Match: 0.8 < ΔE00 ≤1.8; Moderately Unacceptable Mismatch: 1.8 < ΔE00 ≤ 3.6; Clearly Unacceptable Mismatch: 3.6 < ΔE00 ≤ 5.4; Extremely Unacceptable Mismatch: ΔE00 > 5.4). The mean ΔE00 values ranged from 0.5 to 5.52. Masking ability was affected by the opaquer brand, thickness of the resin composite layer, and background shades. Most of the combinations that achieved either excellent or acceptable masking ability were obtained with combinations composed of one or two coats of opaquer and a 1.0-mm-thick resin composite layer for all backgrounds except C4. Acceptable results were also obtained for combinations with 0.5-mm-thick resin composite over C2, A3, and A3.5 backgrounds.

Impact of cleansing protocols to remove endodontic sealer residues on the adhesive interface: Bonding with universal adhesive systems

OBJECTIVE

The aim of this study was to evaluate the effectiveness of cleansing protocols to remove sealer residues using different cleaning strategies and the effect of bond strength of two universal adhesives to dentin impregnated with epoxy resin-based sealer.

MATERIALS AND METHODS

Fifty bovine dentin specimens were impregnated with epoxy resin-based sealer containing calcium hydroxide (Sealer Plus) and submitted to cleansing protocols (n = 10): negative control (NC), positive control (PC), 95% ethanol (ET), xylol (XI), and amyl acetate (AA). Specimens were evaluated by scanning electron microscope (SEM). Other 100 specimens were submitted to the same protocols (n = 20). Each protocol was divided into subgroups (n = 10) according to the universal adhesive system used: Scotchbond Universal (SU); Ambar Universal (AU). Bond strength was evaluated by micro-shear bond test (μSBT). Persistence of residues data were assessed with Kruskal-Wallis and Dunn's tests. μSBT data were analyzed with two-way ANOVA (α = 5%).

RESULTS

ET presented higher persistence of residues compared to AA and XI (p < 0.05). AA and XI were similar from each other (p > 0.05). AU and SU presented similar μSBT values, regardless of the cleansing solution (p > 0.05). SU-NC presented the highest μSBT among all conditions (p < 0.05).

CONCLUSION

The bond strength of universal adhesives was not affected by different amounts of sealer residues after different cleaning protocols.

CLINICAL SIGNIFICANCE

Non-polar substances such as amyl acetate and xylol are effective for removing residues from epoxy resin-based endodontic sealers.

Study of the Intra-Coronal Pressure Generated by Internal Bleaching Agents and Its Influence on Temporary Restoration

Intra-coronal bleaching is a treatment that whitens non-vital teeth from within the pulp chamber, a procedure by which oxygen and free radicals are released. This in vitro study analyzed and compares the oxygen expansion produced when different bleaching agents encounter dental tissues during this type of bleaching. Here, 120 lower incisors were included and prepared to achieve conditions as close as practicable to internal bleaching with the walking bleach technique. The access cavity of the lingual surface was prepared to seal glass tubes with oil inside them by adhesive restoration once the bleach was placed inside the pulp chamber. The following bleaching groups were used: hydrogen peroxide (HP) 30% (n = 30), sodium Perborate (SP) with distilled water (n = 30), a mixture of HP 30% with SP (n = 30) and a control group (n = 30). After 10 days, the oil displacement that took place through the tube due to oxygen release was measured daily. Displacement of the oil was observed in all groups except the control group. The final mean expansion at 10 days was 335.24 ± 76.85 mm for the HP 30% group, 8.40 ± 1.74 mm for the SP group and 183.07 ± 49.93 mm for the HP30% + SP mixture. Significant statistical differences were observed between the three groups using the Games–Howell post hoc test, where HP30% caused the greatest expansion and SP the least expansion. These results suggest that the higher the amount of HP in the sample, the more oxygen expansion is observed, so that temporary restoration must be performed more carefully to avoid displacement.

Effect of whitening toothpaste on surface roughness and microhardness of human teeth: a systematic review and meta-analysis

Background: Whitening toothpastes exert a whitening effect on teeth through higher surface cleaning effectiveness resulting from the abrasive properties of the paste or specific chemical components. This systematic review and meta-analysis was conceptualized to examine the relationship between whitening toothpastes and surface roughness as well as microhardness of human teeth and to clarify the evidence base available around this relationship by conducting a systematic review and meta-analysis of studies in this topic area, looking at in vitro randomized control trials.

Methods: Criteria for including studies in the review were done based on population, intervention, comparison, outcomes and study and studies were identified from electronic databases. Covidence® was used for data screening and data extraction. The CONSORT tool was used for checking relevant content and methodology used in each of the papers reviewed. Systematic review was done followed by meta-analysis, using Review Manager.

Results: A total of 125 articles were obtained on key word search. After duplicate removal and title screening, 17 articles were eligible for full text review. Finally, 7 studies were included for systematic review and meta-analysis was conducted on 4 studies. The forest plot for surface roughness showed that that the meta-analytic effect was statistically significant with surface roughness value being higher in the intervention group. The forest plot for microhardness showed that the meta-analytic effect was statistically significant with the microhardness value being lesser in the intervention group.

Conclusions: Although whitening toothpastes typically can lighten tooth color by about one or two shades, there is some evidence to show that these toothpastes also affect the mineral content of teeth by increasing surface roughness and reducing microhardness. More evidence and further research are needed to identify the type of whitening agent which will whiten the tooth effectively while maintaining the integrity of the tooth structure.

Push-Out Bond Strength of EndoSeal Mineral Trioxide Aggregate and AH Plus Sealers after Using Three Different Irrigation Protocols

OBJECTIVE

 The current study was designed to assess the bonding strength of EndoSeal MTA and AH Plus sealers after using three irrigation protocols as follows: (1) 17% Ethylenediamine tetraacetic acid, (2) 7% maleic acid, and (3) 37% phosphoric acid.

MATERIALS AND METHODS

 Push-out bond strength was evaluated for 60 middle root slices of 1-mm thickness each. They were horizontally cut from freshly extracted single-rooted human teeth. A hole in the root canal was made using a carbide round bur of 1.1 mm in diameter in a middle third root slice. Specimens were dipped in 2.5% NaOCl, and then they were grouped into three groups; G1: 17% EDTA, G2: 7% maleic acid, and G3: 37% phosphoric acid as a final irrigant for 3 minutes. Each group was subdivided into two subgroups, according to the type of sealer, either EndoSeal MTA or AH Plus.

STATISTICAL ANALYSIS

 After the full set of the sealer, the bond strength was evaluated with the push-out test by applying a force to each slice using a plunger with a 1-mm diameter. The one-way Tukey's post hoc test, analysis of variance (ANOVA) test, and Student's t-test were utilized to gather data and statistically evaluate it.

RESULTS

 The irrigation protocol used exhibited significant influence on the bond strength of EndoSeal MTA and AH Plus sealers. AH Plus sealer subgroups showed the highest bond strength with 7% maleic acid, followed by 37% phosphoric acid, and 17% EDTA. While in the EndoSeal MTA sealer subgroups, the highest bond strength was shown with the 17% EDTA followed by 7% maleic acid and 37% phosphoric acid, respectively.

CONCLUSION

 The present study revealed that the type of the final irrigant significantly impacts the bond strength of the sealer used. The AH Plus sealer bond strength was improved by using the 7% maleic acid as a final irrigant. In contrast, the EndoSeal MTA sealer showed the best results with the 17% EDTA as a final irrigant.

Effect of whitening toothpaste on surface roughness and microhardness of human teeth: a systematic review and meta-analysis

Background: Whitening toothpastes exert a whitening effect on teeth through higher surface cleaning effectiveness resulting from the abrasive properties of the paste or specific chemical components. This systematic review and meta-analysis was conceptualized to examine the relationship between whitening toothpastes and surface roughness as well as microhardness of human teeth and to clarify the evidence base available around this relationship by conducting a systematic review and meta-analysis of studies in this topic area, looking at in vitro randomized control trials. Methods: Criteria for including studies in the review were done based on population, intervention, comparison, outcomes and study and studies were identified from electronic databases. Covidence® was used for data screening and data extraction. The CONSORT tool was used for checking relevant content and methodology used in each of the papers reviewed. Systematic review was done followed by meta-analysis, using Review Manager. Results: A total of 125 articles were obtained on key word search. After duplicate removal and title screening, 17 articles were eligible for full text review. Finally, 7 studies were included for systematic review and meta-analysis was conducted on 4 studies. The forest plot for surface roughness showed that that the meta-analytic effect was statistically significant with surface roughness value being higher in the intervention group. The forest plot for microhardness showed that the meta-analytic effect was statistically significant with the microhardness value being lesser in the intervention group. Conclusions: Although whitening toothpastes typically can lighten tooth color by about one or two shades, there is some evidence to show that these toothpastes also affect the mineral content of teeth by increasing surface roughness and reducing microhardness. More evidence and further research are needed to identify the type of whitening agent which will whiten the tooth effectively while maintaining the integrity of the tooth structure.

Influence of intracoronal bleaching agents on the bond strength of MTA cements to composite resin and their surface morphology

The objective of the present in vitro study was to evaluate micro-tensile bond strength (µSBS) of MTA cements to composite resin using a universal adhesive after internal bleaching procedure, and to examine surface characteristics of MTA cements exposed to bleaching agents. MTA specimens were divided into three subgroups according to the bleaching agent used which were, 37% carbamide peroxide (CP), 35% hydrogen peroxide (HP), and no exposure as a control group (n = 12). After exposure to bleaching agent, composite resins were applied to MTA surfaces using a universal adhesive in self-etch mode. The specimens were exposed to a shear force until failure to evaluate bond strength. MTA surfaces were investigated using scanning electron microscopy (SEM) to observe the effects of the bleaching agents. Differences between groups were analyzed using two-way ANOVA test and intergroup comparisons were assessed with Tukey test (p < 0.05). Although there was a slight difference in bond strength between bleaching agents (CP and HP), no significant difference was found, irrespective of MTA cement. After the HP application, the bond strength values decreased approximately by half compared with the controls. SEM results demonstrated distinct morphological differences between the intact MTA surface (control) and treated MTA surface. Distinct micro-cracks, surface irregularities, and capillary voids formed due to the superficial dissolution caused by peroxides. Exposure to the intra-coronal bleaching agents had a negative influence on the surface morphology of MTA cements and their bond strength to composite resin.

The Thickness and Opacity of Aesthetic Materials Influence the Restoration of Discolored Teeth

OBJECTIVES

This study aimed to evaluate the influence of thickness and opacity on the ability of composite resin and ceramic veneer restorations to mask discolored teeth.

METHODS

Ninety veneers were made of lithium disilicate ceramic, shades BL1 and 0 (IPS e.max Press, Ivoclar Vivadent), and 60 were made of composite resin, shade BL-L (IPS Empress Direct, Ivoclar Vivadent). The veneers measured 4 mm in width x 4 mm in length and had a thickness of 0.7, 1.0, or 1.2 mm. One hundred and fifty human premolars were selected to obtain 150 dental fragments with the following dimensions: 4 mm x 4 mm x 3 mm (width x length x thickness). The fragments were discolored, submitted to color measurement and randomly assigned to 15 groups (n=10) according to the type and opacity of the restorative material (IPS e.max Press: high translucency [HT], low translucency [LT], and medium opacity [MO]; IPS Empress Direct: dentin and enamel) and thickness of the veneers (0.7, 1.0, and 1.2 mm). After cementation of the ceramic or composite resin veneers using a translucent resin cement (RelyX veneer, 3M), a final color measurement was taken from each specimen and the total color variation (ΔE) was calculated by subtracting the initial and the final color measurement. The final lightness (L*) of the restored dental fragments was also calculated.

RESULTS

The highest ΔE values were observed for the LT and MO ceramic groups, followed by dentin composite resin. Regarding the different thicknesses of ceramic veneers, every 1.2-mm-thick group had higher values of ΔE, considering their respective opacities (p<0.05). The highest lightness values were found for the LT and MO ceramic veneers (thickness of 1.2 mm). Dentin-shade composite resins showed similar lightness values in all groups.

CONCLUSION

The best thickness/opacity combinations for masking discolored dental substrates were LT and MO ceramic veneers with 1.2-mm thickness. Dentin-shade composite resin veneers with a thickness of 0.7-1.0 mm showed good ability to mask discolored dental substrates.

Effectiveness and color stability of bleaching techniques on blood-stained teeth: An in vitro study

OBJECTIVE

Evaluate the effectiveness and color stability of bleaching techniques on blood-stained teeth.

MATERIAL AND METHODS

The teeth were stained by blood and allocated to groups: walking bleach, inside/outside, and in-office bleaching. L*, a*, b*, C*, h° color coordinates were measured using a clinical spectrophotometer at baseline, weekly (T1-T2-T3), and at 1-week (T4), 6-months (T5), and 1-year (T6) follow-up evaluations. ΔE ab * , ΔE 00 , and ΔWI D were calculated between sequential evaluation timepoints and between baseline and each evaluation timepoint. Color coordinates and WI_D differences in each timepoint and technique were analyzed by Wilcoxon Signed Rank, Kruskal-Wallis and Mann-Whitney U test, respectively. ΔE ab * , ΔE 00 , and ΔWI D were interpreted by color visual thresholds.

RESULTS

The techniques presented a significant increase in L* and WI_D and, a significant decrease in a* and b* until the completion of treatments. Statistical differences between the techniques for a*, b* and WI_D were observed from T1 until T3. All techniques demonstrated excellent effectiveness for ΔE ab * , ΔE 00 , and ΔWI D between baseline and each evaluation and follow-up timepoints. However, at T6, it was possible to identify a rebound effect for all techniques.

CONCLUSIONS

All bleaching techniques presented excellent effectiveness. The stability of the whitening produced was maintained for 6 months.

CLINICAL SIGNIFICANCE

Effective whitening of blood-stained teeth was achieved using walking bleach (sodium perborate), inside/outside (hydrogen peroxide - 7.5%) and in-office techniques (hydrogen peroxide - 35%). The bleaching techniques were effective after the completion of the treatments. A slight rebound was observed at 1 year follow-up.

Hybrid layer formation and bond strength to dentin impregnated with endodontic sealer after cleaning protocols

Aims:

This study evaluated the hybrid layer formation and bond strength of two adhesive systems, Scotchbond Universal (U) or Adper Scotchbond Multi Purpose (M), after cleaning protocols using ethanol (E) or xylol (X), to dentin impregnated with an epoxy-resin based endodontic sealer.

Settings and Design:

The study design was an Experimental in vitro study.

Methodology:

One hundred bovine dentin specimens were randomly allocated into five groups (n = 10): Computed tomography (CT) (control): Only acid etching + M; E+U; X+U; E+M. After the specimen preparation, images were obtained using confocal laser scanning microscopy to evaluate the hybrid layer formation. For microshear bond strength test, the dentin specimens were included in polyvinyl chloride tubes and four resin composite cylinders were placed on the surface. The analysis was performed 24 h after storage.

Statistical Analysis Used:

For parametric and nonparametric data, analysis of variance followed by Tukey test and Kruskal–Wallis, followed by Dunn test were, respectively, used at a significance level of 5%.

Results:

Regarding hybrid layer formation, all experimental groups were similar to each other (P > 0.05). However, CT showed higher hybrid layer formation than other groups (P < 0.05), except in relation to X+M (P > 0.05). Bond strength was statistically similar among all groups (P > 0.05).

Conclusions:

Hybrid layer formation in dentin impregnated with epoxy resin-based sealer and submitted to different cleaning protocols was similar to the control group only for X+M. No differences were found among the experimental groups. Regarding the bond strength, no effect was observed for any group.

Comparison of the Bleaching Efficacy of Different Agents Used for Internal Bleaching: A Systematic Review and Meta-Analysis

INTRODUCTION

The aim of this study was to analyze and compare the efficacy of different bleaching agents typically used for internal bleaching of endodontically treated discolored teeth.

METHODS

Electronic databases (PubMed, Web of Science, and Cochrane Library) were searched by 2 reviewers for clinical trials in which the color of endodontically treated discolored teeth before and after internal bleaching was examined using shade guide units (ΔSGU) or a spectrophotometer/colorimeter (ΔE). The efficacies of the bleaching agents were compared using subgroup analyses. Statistical heterogeneity was assessed with the Cochran Q test and I² statistic. Publication bias was evaluated using funnel plots.

RESULTS

Eight studies were included in the systematic review, 6 of which could be included in the meta-analyses. Internal bleaching led to a significant change in tooth shade (ΔSGU: 6.27 [95% confidence interval, 5.36-7.17], ΔE: 12.83 [95% confidence interval, 9.46-16.20]). With regard to ΔSGU, the use of carbamide peroxide (35% or 37%), hydrogen peroxide (35%), and the combination of sodium perborate and hydrogen peroxide (3% or 30%) led to a better bleaching effect than sodium perborate (adjusted P value ≤ .026). Regarding ΔE, there were no significant differences between carbamide peroxide (37%), hydrogen peroxide (35%), and sodium perborate mixed with hydrogen peroxide (P = .051). The risk of bias of the included studies was classified as moderate to high.

CONCLUSIONS

Carbamide peroxide, hydrogen peroxide, and sodium perborate have a significant bleaching effect on discolored, root canal-treated teeth. For a valid assessment of shade stability and a comparison of bleaching agents and their concentrations, further studies with long-term recalls are necessary.

Minimally Invasive Multidisciplinary Restorative Approach to the Esthetic Zone Including a Single Discolored Tooth

OBJECTIVES

The case report describes a minimally invasive, multidisciplinary approach to a single discolored anterior tooth, with internal bleaching using traditional Japanese paper (Washi), a gingivoplasty with a three-dimensional (3D) printed surgical guide, and ultrathin feldspathic porcelain veneers. Clinical consideration: The patient's primary concern was improving her smile. After clinical evaluation, internal tooth bleaching for the discolored tooth and gingivoplasty with restoration of the maxillary anterior six teeth and first premolars was recommended. The internal tooth whitening was accomplished with sodium perborate mixed with 30% hydrogen peroxide impregnated in Washi and sealed in the root canal with glass ionomer. Once the tooth bleaching was completed, the 3D printed surgical guide was placed in the patient's maxillary anterior region and used to guide soft tissue recontouring. After 6 months, ultrathin feldspathic porcelain veneers were placed.

CONCLUSION

Well-planned restorative procedures combining internal tooth bleaching using Washi, gingivoplasty performed with electrosurgery using a 3D printed surgical guide, and ultrathin feldspathic porcelain veneers can achieve the desired results in the esthetic zone and remain successful for 4 years.

Assessment of Oxygen Expansion during Internal Bleaching with Enamel and Dentin: A Comparative In Vitro Study

Internal bleaching is a conservative, non-invasive, and simple treatment that is frequently performed in daily clinical practice. The present in vitro study analyzes the oxygen expansion of different bleaching agents resulting from the oxidation reaction when interacting with enamel and dentin. Enamel and dentin were crushed separately until obtaining a fine powder with particles of an approximate size between 0.06 and 0.2 mm. Each enamel and dentin sample were mixed with 37% carbamide peroxide (CP 37%), 30% hydrogen peroxide (HP 30%), sodium perborate (SP) combined with HP 30% (HP 30% + SP) and SP with distilled water (SP). A total of 280 1 mm diameter glass tubes were used with 70 for each bleaching agent (30 for powdered enamel evaluation, 30 for powdered dentin evaluation, and 10 controls). The bleaching agents were placed in the prepared tubes immediately after mixing the components. As expansion occurred, the oil inside the tube was displaced, through which the resulting expansion was evaluated and measured for 10 days. A significant expansion was observed that varied in magnitude according to the bleaching agent and the tooth structure used. Student's t test and Welch's ANOVA were used to analyze the data obtained. The highest mean expansion of both enamel and dentin was observed with 30% HP (66.6 mm for enamel, 94.5 mm for dentin) followed by HP 30% + SP (48.6 mm for enamel, 52.7 mm for dentin), CP 37% (38.4 mm for enamel, 52.6 mm for dentin) and finally SP with water (12.7 mm for enamel, 4.4 mm for dentin). It was observed that the expansion in the SP group with enamel was significantly lower than in the rest of the groups, while that registered for HP 30% was significantly higher. (p < 0.001). The results with dentin were similar, with a significantly lower expansion for SP and higher for HP 30% (p < 0.001). The oxygen expansion observed as a result of the interaction between bleaching agents and dental tissues could contribute to improving our understanding of bleaching and its results. These results suggest that bleaching agents react with the organic component of the tooth structure.

Effectiveness and Adverse Effects of Over-the-Counter Whitening Products on Dental Tissues

The role of bleaching agents (e.g., hydrogen peroxide) in tooth bleaching is quite well-described in a few literature studies and considered as the option choice for those desiring brighter teeth, but alternative methods have emerged to fulfill the desire of patients in a faster, easier, and cheaper way. In this context, whitening over-the-counter (OTC) products are available in several vehicles, such as toothpaste, rinses, gums, paint-on varnishes, and strips, but their effectiveness in terms of bleaching is questioned. This review aimed to describe their mode of action, whitening effectiveness, and harmful effects associated with the indiscriminate use of these products. Dentifrices usually present a combination of abrasives that can induce damage to the tooth surface without evidence of promoting real bleaching. The same was found for rinses, which might present a low pH, with an erosive potential. Charcoal has been included in the composition of these products to improve their whitening effect but there is no evidence supporting it. Regarding strips, they present hydrogen peroxide in a variety of concentrations and are the only OTC products able to promote bleaching. Despite the vehicle, an indication for the use of these products should be made after a careful individual diagnosis of the etiology of the dental staining, considering that most of them seem to be effective only in removing extrinsic stains or preventing their formation over enamel. Also, their indiscriminate use might induce damage and deleterious effects over tooth tissues or gingival tissues. The dentist should be aware of the composition and mode of action of each individual product as they change according to the composition and the vehicle used to recommend the best mode of usage. Still, there is no sound evidence that any of the described OTC products promote a better bleaching effect than the products indicated for a professional.

Spectrophotometric evaluation of the effectiveness of Er,Cr:YSGG laser-assisted intracoronal tooth bleaching treatment using different power settings

BACKGROUND

Non-vital tooth discoloration is a common condition in dental practice. The aim of this in vitro study was to evaluate the efficacy of intracoronal bleaching treatments of non-vital teeth either activated or not by Er,Cr:YSGG laser (2780 nm) operating at 1.25 or 2.5 W.

METHODS

Twenty four human canines were artificially stained after implementation of root canal treatment. Subsequently, the teeth were randomly divided into three groups (n = 8): Group 1 (control) received intracoronal bleaching treatment with a bleaching gel containing 35 % hydrogen peroxide for 40 min, Group 2 received the same treatment assisted with Er,Cr:YSGG laser (2780 nm) operating at 1.25 W average power for 30 s and Group 3 received the same treatment with Group 2, but the average power was adjusted to 2.5 W. The bleaching treatments repeated after one week. Spectrophotometric analysis of tooth color change (ΔE) was implemented 7 days after both bleaching sessions.

RESULTS

The results of two-way ANOVA revealed that there was a tendency of no significant difference in color change between the three experimental groups (p = 0.063). However, the between-group comparisons showed that laser 2.5 W group had significantly higher ΔE than the control group after the first bleaching session. Moreover, a significant interaction between bleaching treatment and number of applications was detected (p = 0.026).

CONCLUSIONS

Er,Cr:YSGG laser irradiation significantly increased ΔE only after the first bleaching session when operating at 2.5 W. After the second bleaching session ΔE was not different compared to the control group, irrespectively of the laser power settings.

Impact of Conservative Endodontic Cavities on Root Canal Preparation and Biomechanical Behavior of Upper Premolars Restored with Different Materials

INTRODUCTION

The purpose of this study was to evaluate the impact of conservative endodontic cavities (CECs) on root canal preparation, restoration, and biomechanical behavior of teeth prepared using different shaping systems and restorative materials.

METHODS

Ninety upper premolars with a bifurcated root were matched based on morphology and randomly assigned to a control group (n = 10) or 1 of the following experimental groups (n = 40): traditional endodontic cavity and CEC. Teeth were subdivided according to instrumentation (n = 10) as follows: ProTaper Universal (Dentsply Maillefer, Ballaigues, Switzerland), Reciproc (VDW GmbH, Munich, Germany), Reciproc Blue (VDW GmbH), and Hyflex EDM (Coltene/Whaledent, Altstätten, Switzerland). After canal obturation, teeth were restored using temporary material, conventional composite, regular bulk fill composite, or bulk fill flow combined with conventional composite. Before and after preparation and after obturation, the teeth were scanned using micro-computed tomographic imaging. Canal transportation (CT), the percentage of untouched canal surfaces (UCSs), voids in restoration (VRs), and residual filling material in the pulp chamber were evaluated. Finite element analysis, fracture resistance, and the failure pattern were recorded. The data were analyzed using analysis of variance and the Tukey and chi-square tests.

RESULTS

CECs had greater CT, percentage of filling material, and VRs compared with traditional endodontic cavities (P < .0001). The highest CT and UCSs were observed in CEC with ProTaper Universal. Bulk fill flow combined with conventional composite showed a lower percentage of VRs compared with other restorative materials (P < .05). Finite element analysis, fracture resistance, and failure pattern revealed similar behaviors in all groups (P > .05) .

CONCLUSIONS

CECs had a negative impact on root canal centralization, UCSs, cleaning of the pulp chamber, and percentage of VRs. Controlled memory instruments were the most adequate for the root canal preparation of CECs. The endodontic cavity did not influence the biomechanical behavior of restored teeth.

Photon-Induced Photoacoustic Streaming Activation of the Postbleaching Antioxidant Application Rapidly Improves Bonding to Pulp Chamber Dentin

Objective: This study explored whether the erbium/yttrium/aluminum/garnet (Er:YAG) laser irradiated through the photon-induced photoacoustic streaming (PIPS) method would impact on the resin bonding to pulp chamber dentin when used to activate bleaching and/or postbleaching antioxidant treatment. Materials and methods: One hundred five dentin samples prepared from freshly extracted human incisors were randomly assigned to seven groups (n = 15): control (no bleaching/antioxidant); CB (conventional bleaching only); MB (modified bleaching only); CB-NI (conventional bleaching+antioxidant with needle irrigation); MB-NI (modified bleaching+antioxidant with needle irrigation); CB-PIPSI (conventional bleaching+antioxidant with PIPS-activated irrigation); and MB-PIPSI (modified bleaching+antioxidant with PIPS-activated irrigation). Bleaching (40% hydrogen peroxide) lasted for 20 min. Modified bleaching groups were irradiated with Er:YAG laser using the PIPS tip (2940 nm, 0.90 W, 30 Hz, 30 mJ/pulse, 50-μsec pulse duration) during the first 60 sec of the procedure. The antioxidant treatment with 10% sodium ascorbate lasted for 60 sec. PIPS-activated antioxidant groups were irradiated with Er:YAG laser using the PIPS tip (2940 nm, 0.30 W, 15 Hz, 20 mJ per pulse, 50-μsec pulse duration) throughout the procedure. After completing the composite restorations, all samples were subjected to 5000 thermocycling and the shear bond strength (SBS) test at a crosshead speed of 1 mm/min. SBS data were analyzed using the Kruskal-Wallis test with Bonferroni correction (α& 0.05). Results: No significant difference was detected among the control, CB-PIPSI, and MB-PIPSI (p > 0.05), which presented a significantly higher SBS compared with the other groups (p < 0.05). Conclusions: Irrespective of the application mode of the initial bleaching, PIPS-activated irrigation of the antioxidant improved SBS to bleached dentin to the level of the control in 1 min. Postbleaching antioxidant treatment combined with the PIPS method might be a promising approach to enable immediate resin restoration of bleached dentin.

Efficiency of Teeth Bleaching after Regenerative Endodontic Treatment: A Systematic Review

The aim of this review is to evaluate of effectiveness of bleaching procedures used to treat discolored teeth subsequent to regenerative endodontic procedures (REPs) based on the review of in vitro and in vivo studies. This literature review was carried out according to the PRISMA guidelines. Four databases (PubMed, Scopus, the Cochrane Library, and Web of Science databases) were searched electronically, until 30 January 2020 without a year limit. The quality of studies was assessed using a modified methodological index for non-randomized studies. After analyzing 1405 studies, 6 in vitro and 9 in vivo studies were eligible for this review. In in vitro studies, effectiveness of bleaching was assessed in teeth discolored by antibiotic pastes, blood, and barrier materials in various combinations. In all analyzed studies, bleaching was effective in teeth discolored by antibiotic pastes as well as by blood and barrier materials. Of 26 treated teeth in the in vivo studies, 17 teeth were bleached successfully. In six cases, there was improvement of the shade. In three cases, bleaching was not sufficient. Bleaching material, techniques, and times differed between studies. Whitening of discolored teeth after REPs is achievable. However, to establish precise guidelines, further long-term clinical studies should be performed.