Effect of endodontic cement on bone mineral density using serial dual-energy x-ray absorptiometry

Physicochemical, mechanical and biological properties of nano-calcium silicate-based cements: a systematic review

This systematic review evaluated the effects of nano-sized cement particles on the properties of calcium silicate-based cements (CSCs). Using defined keywords, a literature search was conducted to identify studies that investigated properties of nano-calcium silicate-based cements (NCSCs). A total of 17 studies fulfilled the inclusion criteria. Results indicated that NCSC formulations have favourable physical (setting time, pH and solubility), mechanical (push out bond strength, compressive strength and indentation hardness) and biological (bone regeneration and foreign body reaction) properties compared with commonly used CSCs. However, the characterization and verification for the nano-particle size of NCSCs were deficient in some studies. Furthermore, the nanosizing was not limited to the cement particles and a number of additives were present. In conclusion, the evidence available for the properties of CSC particles in the nano-range is deficient-such properties could be a result of additives which may have enhanced the properties of the material.

Sealing Ability and Adaptability of Nano Mineral Trioxide Aggregate as a Root-End Filling Material

Aim: Comparison between Nano MTA & MTA as a root-end filling materials regarding adaptability and sealing ability. Materials and Methods: Forty extracted human maxillary incisors with straight roots were used. After root canals preparation and obturation, the apical 3 mm of each root was resected perpendicular to the long axis of the tooth. Root end cavities were prepared to a depth of 3mm parallel to the long axis of the tooth. The teeth were randomly divided into two main equal groups of 20 samples each according to the root-end filling material used either MTA or Nano MTA. Ten samples from each group were sectioned longitudinally into two equal halves to measure the sealing ability and another ten samples from each group were sectioned transversally to obtain 1 mm thick section to measure the adaptability of both materials. All samples were photographed under the SEM at three different magnifications (×1000). The gap thickness between the root end filling material and the retro cavity dentine walls were measured at seven selected points at the material-dentine interface in micrometers (µm). Results: Nano MTA and MTA showed no statistically significant difference in the gap thickness between dentin-material interface in both longitudinal and transverse sections. Regarding the sealing ability, the mean value in MTA was (3.27±0.77), while the mean in Nano-MTA was (3.15±0.71). Regarding the adaptability, the mean value in MTA was (2.46±0.60), while the mean in Nano-MTA was (2.05±0.712). Both materials showed good sealing ability and good adaptation to the dentinal wall. Conclusion: Nano MTA revealed good sealing ability and adaptability comparable to MTA when used as a retrograde filling material.

Potential impact of pediatric obstructive sleep apnea on mandibular cortical width dimensions

STUDY OBJECTIVES

To analyze differences in mandibular cortical width (MCW) among children diagnosed with obstructive sleep apnea (OSA) or at high- or low-risk for OSA.

METHODS

A total of 161 children were assessed: 60 children with polysomnographically diagnosed OSA, 56 children presenting symptoms suggestive of high-risk for OSA, and 45 children at low risk for OSA. Children at high- and low-risk for OSA were evaluated through the Pediatric Sleep Questionnaire. MCW was calculated using ImageJ software from panoramic radiograph images available from all participants. Differences between MCW measurements in the 3 groups were evaluated using analysis of covariance and Bonferroni post-hoc tests, with age as a covariate. The association between MCW and specific cephalometric variables was assessed through regression analysis.

RESULTS

The participants' mean age was 9.6 ± 3.1 years (59% male and 41% female). The mean body mass index z-score was 0.62 ± 1.3. The polysomnographically diagnosed OSA group presented smaller MCW than the group at low-risk for OSA (mean difference = -0.385 mm, P = .001), but no difference with the group at high-risk for OSA (polysomnographically diagnosed OSA vs high-risk OSA: P = .085). In addition, the MCW in the group at high-risk for the OSA was significantly smaller than the group at low-risk for the OSA (mean difference = -0.301 mm, P = .014). The cephalometric variables (Sella-Nasion-A point angle (SNA) and Frankfort - Mandibular Plane angle (FMA)) explained only 8% of the variance in MCW.

CONCLUSIONS

Reductions in MCW appear to be present among children with OSA or those at high-risk for OSA, suggesting potential interactions between mandibular bone development and/or homeostasis and pediatric OSA.

CITATION

Fernandes Fagundes NC, d'Apuzzo F, Perillo L, et al. Potential impact of pediatric obstructive sleep apnea on mandibular cortical width dimensions. J Clin Sleep Med. 2021;17(8):1627-1634.

The pH and Bismuth Oxide Particle Size can Affect Diametral Tensile Strength of Mineral Trioxide Aggregate

OBJECTIVE

The aim of the present study was to evaluate the effect of different pHs (4.4, 5.4, 6.4, 7.4, 8.4, and 9.4) and three different particle sizes of bismuth oxide on diametral tensile strength (DTS) of white Mineral Trioxide Aggregate (WMTA).

METHODS

Thirty cylindrical moulds were divided into six groups of five; WMTA was mixed, placed inside the moulds, and wrapped in pieces of gauze soaked in synthetic tissue fluid (STF) with pH values of either 4.4, 5.4, 6.4, 7.4, 8.4, 9.4. For bismuth oxide, eighteen similar molds were divided into three groups of six (n=6). Then bismuth oxide with three particle sizes, including fine (120 nm), medium (200 nm), and coarse (10 μm), were provided and added to the Portland cement, which did not have any bismuth oxide to create WMTA. Then WMTA was mixed, placed inside cylindrical molds. After incubation at 95% humidity for 48 hours, samples were subjected to DTS testing by an Instron Universal testing machine with a crosshead speed of 1 mm/min. Then, one sample from each group was subjected to scanning electron microscope (SEM) analysis. Data were analysed by ANOVA and Tukey tests (α=0.05).

RESULTS

The comparison of DTS in pH groups were: 8.4>7.4>9.4>6.4>5.4>4.4 (P<0.05); and in bismuth oxide groups were: fine particles > medium particles > coarse particles (P<0.05). Acidic pH, negatively affected the distribution of Ca2+ and Si4+ ions, while bismuth oxide with fine particles enhanced it.

CONCLUSION

Acidic pH can decline the DTS of MTA significantly. However, reducing the particle size of bismuth oxide can increase the DTS of MTA significantly.

Evaluation of Mechanical Activation and Chemical Synthesis for Particle Size Modification of White Mineral Trioxide Aggregate

Objective

Initial setting time is one of the most important properties of calcium silicate cements (CSCs) such as white mineral trioxide aggregate (WMTA). This study aimed to evaluate the effect of two methods used to reduce the particle size of WMTA, mechanical activation and chemical synthesis.

Methods

WMTA without bismuth oxide (WMTA-B) was provided and divided into four groups (n=5) including: WMTA-B, WMTA-B+10 min milling, WMTA-B+30 min milling, and sol-gel. In groups 2 and 3, the milling was performed by using tungsten carbide balls in a ratio 1:15 (w/w) and a vibration frequency of 30 Hz together with absolute ethanol. For the fourth group, polyethylene glycol (PEG), calcium acetate (Ca(C₂H₃O₂)₂), SiO₂, and aluminum oxide (Al₂O₃) were used for the sol-gel process. After preparation, sample powders were mixed with distilled water and placed in cylindrical molds, covered with water-moistened gauze, and incubated at 37°C for 24 hours. The Vicat needle test analyzed the initial setting time. Data were analyzed by ANOVA and Tukey tests at a significance level of P<0.05. The correlation between particle size and setting time was determined.

Results

Initial setting time of the sol-gel and WMTA-B+30 min milling was significantly lower than in the other two groups (P<0.05). A significant correlation was noticed between particle size and initial setting time (P<0.05).

Conclusion

Sol-gel process introduces a promising alternative strategy for the reduction of initial setting time of CSC materials. While both methods increased surface area, mechanical activation was not as successful in reducing surface area and initial setting time as effectively as the sol-gel process.

Osteoinductive potential and bone-bonding ability of ProRoot MTA, MTA Plus and Biodentine in rabbit intramedullary model: Microchemical characterization and histological analysis

OBJECTIVE

To study the in vivo osteoinductive potential, bone-bonding ability (bioactivity) and bone biomineralization of current hydraulic calcium silicate cements used as graft materials and placed in contact with medullary bone.

METHODS

ProRoot MTA, MTA Plus and Biodentine were used to fill surgical bone defects (2-mm diameter through the entire cortical thickness to reach the medullary bone) in the tibia of mature male rabbits. Tibiae were retrieved after 30days and submitted to histological analysis and microchemical characterization using Optical Microscopy (OM) and Environmental Scanning Electron Microscopy with Energy Dispersive X-ray analysis (ESEM-EDX). Bone neoformation and histomorphometric evaluations, degree of mineralization (by Ca/P, Ca/N and P/N ratios) and the diffusion of material elements were studied.

RESULTS

Bone neoformation was observed in response to all materials. No sign of necrosis were found on the walls of the pre-existing cortical bone. No osteoclasts and no formation of fibrous tissue were evident. Sign of angiogenesis were present. EDX (element content, line profile and element mapping) showed the increase in Ca and P and decrease in C, S and N from the mature bone towards the mineralizing interface. Ca/P, Ca/N and P/N ratios showed differences in the degree of mineralization/maturation stage of bone. MTA Plus and ProRoot MTA exhibited close contact with the pre-existing bone and good bone-bonding with neoformed bone juxtaposed on the medullary side of the materials without interposed connective tissue or resorption lacunae or gaps. The materials showed a dense appearance with 100% of residual materials and no colonization by fluids and cells. No migration of Bi or Al material elements to the newly formed bone was found. Biodentine showed newly formed trabecular bone with marrow spaces and sparse traces of residual material (≈9%).

SIGNIFICANCE

The in vivo osteoinductive properties with dynamic biomineralization processes around these calcium silicate materials extruded in medullary bone in appropriate animal model have been demonstrated by ESEM-EDX in association with OM. Good biocompatibility was evident as only slight inflammatory infiltrate and no sign of necrosis at the interface with the pre-existing bone were found. MTA Plus and ProRoot MTA exhibited bioactive potential as they can bond to bone directly without interposed connective tissue. Biodentine was replaced by newly formed bone.

CLINICAL SIGNIFICANCE

The results of the study demonstrate the capacity of calcium silicate cements to allow osteoid matrix deposition by activated osteoblasts and favour its biomineralization, and to achieve a direct bond between the (bioactive) materials surface and the mineralized bone matrix.

Calcium silicate-based cements and functional impacts of various constituents

Calcium silicate-based cements have superior sealing ability, bioactivity, and marginal adaptation, which make them suitable for different dental treatment applications. However, they exhibit some drawbacks such as long setting time and poor handling characteristics. To overcome these limitations calcium silicates are engineered with various constituents to improve specific characteristics of the base material, and are the focus of this review. An electronic search of the PubMed, MEDLINE, and EMBASE via OVID databases using appropriate terms and keywords related to the use, application, and properties of calcium silicate-based cements was conducted. Two independent reviewers obtained and analyzed the full texts of the selected articles. Although the effects of various constituents and additives to the base Portland cement-like materials have been investigated, there is no one particular ingredient that stands out as being most important. Applying nanotechnology and new synthesis methods for powders most positively affected the cement properties.

The role of angiogenesis in implant dentistry part I: Review of titanium alloys, surface characteristics and treatments

Background

Angiogenesis plays an important role in osseointegration process by contributing to inflammatory and regenerative phases of surrounding alveolar bone. The present review evaluated the effect of titanium alloys and their surface characteristics including: surface topography (macro, micro, and nano), surface wettability/energy, surface hydrophilicity or hydrophobicity, surface charge, and surface treatments of dental implants on angiogenesis events, which occur during osseointegration period.

Material and Methods

An electronic search was performed in PubMed, MEDLINE, and EMBASE databases via OVID using the keywords mentioned in the PubMed and MeSH headings regarding the role of angiogenesis in implant dentistry from January 2000-April 2014.

Results

Of the 2,691 articles identified in our initial search results, only 30 met the inclusion criteria set for this review. The hydrophilicity and topography of dental implants are the most important and effective surface characteristics in angiogenesis and osteogenesis processes. The surface treatments or modifications of dental implants are mainly directed through the enhancement of biological activity and functionalization in order to promote osteogenesis and angiogenesis, and accelerate the osseointegration procedure.

Conclusions

Angiogenesis is of great importance in implant dentistry in a manner that most of the surface characteristics and treatments of dental implants are directed toward creating a more pro-angiogenic surface on dental implants. A number of studies discussed the effect of titanium alloys, dental implant surface characteristic and treatments on agiogenesis process. However, clinical trials and in-vivo studies delineating the mechanisms of dental implants, and their surface characteristics or treatments, action in angiogenesis processes are lagging.

Key words:Angiogenesis, dental implant, osseointergration.

Repair of bone defect by nano-modified white mineral trioxide aggregates in rabbit: A histopathological study

Background

Many researchers have tried to enhance materials functions in different aspects of science using nano-modification method, and in many cases the results have been encouraging. To evaluate the histopathological responses of the micro-/nano-size cement-type biomaterials derived from calcium silicate-based composition with addition of nano tricalcium aluminate (3CaO.Al2O3) on bone healing response.

Material and Methods

Ninety mature male rabbits were anesthetized and a bone defect was created in the right mandible. The rabbits were divided into three groups, which were in turn subdivided into five subgroups with six animals each based on the defect filled by: white mineral trioxide aggregate (WMTA), Nano-WMTA, WMTA without 3CaO.Al2O3, Nano-WMTA with 2% Nano-3CaO.Al2O3, and empty as control. Twenty, forty and sixty days postoperatively the animals were sacrificed and the right mandibles were removed for histopathological evaluations. Kruskal-Wallis test with post-hoc comparisons based on the LSMeans procedure was used for data analysis.

Results

All the experimental materials provoked a moderate to severe inflammatory reaction, which significantly differed from the control group (p< 0.05). Statistical analysis of bone formation and bone regeneration data showed significant differences between groups at 40- and 60- day intervals in all groups. Absence of 3CaO.Al2O3 leads to more inflammation and foreign body reaction than other groups in all time intervals.

Conclusions

Both powder nano-modification and addition of 2% Nano-3CaO.Al2O3 to calcium silicate-based cement enhanced the favorable tissue response and osteogenesis properties of WMTA based materials.

Key words:Bone regeneration, cement, endodontics, histopathology, nano-wmta, tricalcium aluminate.

Effect of particle size on calcium release and elevation of pH of endodontic cements

BACKGROUND/AIM

Elevation of pH and calcium ion release are of great importance in antibacterial activity and the promotion of dental soft and hard tissue healing process. In this study, we evaluated the effect of particle size on the elevation of pH and the calcium ion release from calcium silicate-based dental cements.

MATERIAL AND METHODS

Twelve plastic tubes were divided into three groups, filled with white mineral trioxide aggregate (WMTA), WMTA plus 1% methylcellulose, and nano-modified WMTA (nano-WMTA), and placed inside flasks containing 10 ml of distilled water. The pH values were measured using a pH sensor 3, 24, 72, and 168 h after setting of the cements. The calcium ion release was measured using an atomic absorption spectrophotometer with same sample preparation method. Data were subjected to two-way analysis of variance (anova) followed by post hoc Tukey tests with significance level of P < 0.05.

RESULTS

Nano-WMTA showed significant pH elevation only after 24 h (P < 0.05) compared with WMTA, and after 3, 24, and 72 h compared with WMTA plus 1% methylcellulose (P < 0.05). Nano-WMTA showed significantly higher calcium ion release values compared to the other two groups (P < 0.05).

CONCLUSIONS

Nano-modification of WMTA remarkably increased the calcium ion release at all time intervals postsetting, which can significantly influence the osteogenic properties of human dental pulp cells and as a consequence enhance mineralized matrix nodule formation to achieve desirable clinical outcomes. However, the increase in pH values mainly occurred during the short time postsetting. Addition of 1% methylcellulose imposed a delay in elevation of pH and calcium ion release by WMTA.

Radiopacifier particle size impacts the physical properties of tricalcium silicate-based cements

INTRODUCTION

The aim of this study was to evaluate the impact of radiopaque additive, bismuth oxide, particle size on the physical properties, and radiopacity of tricalcium silicate-based cements.

METHODS

Six types of tricalcium silicate cement (CSC) including CSC without bismuth oxide, CSC + 10% (wt%) regular bismuth oxide (particle size 10 μm), CSC + 20% regular bismuth oxide (simulating white mineral trioxide aggregate [WMTA]) as a control, CSC + 10% nano bismuth oxide (particle size 50-80 nm), CSC + 20% nano-size bismuth oxide, and nano WMTA (a nano modification of WMTA comprising nanoparticles in the range of 40-100 nm) were prepared. Twenty-four samples from each group were divided into 4 groups and subjected to push-out, surface microhardness, radiopacity, and compressive strength tests. Data were analyzed by 1-way analysis of variance with the post hoc Tukey test.

RESULTS

The push-out and compressive strength of CSC without bismuth oxide and CSC with 10% and 20% nano bismuth oxide were significantly higher than CSC with 10% or 20% regular bismuth oxide (P < .05). The surface microhardness of CSC without bismuth oxide and CSC with 10% regular bismuth oxide had the lowest values (P < .05). The lowest radiopacity values were seen in CSC without bismuth oxide and CSC with 10% nano bismuth oxide (P < .05). Nano WMTA samples showed the highest values for all tested properties (P < .05) except for radiopacity.

CONCLUSIONS

The addition of 20% nano bismuth oxide enhanced the physical properties of CSC without any significant changes in radiopacity. Regular particle-size bismuth oxide reduced the physical properties of CSC material for tested parameters.