Tooth Storage, Dental Pulp Stem Cell Isolation, and Clinical Scale Expansion without Animal Serum

Characterization of cells in blood evoked from periapical tissues in immature teeth with pulp necrosis and their potential for autologous cell therapy in Regenerative Endodontics

OBJECTIVE

The objectives of this study were to isolate, characterize progenitor cells from blood in the root canals of necrotic immature permanent teeth evoked from periapical tissues and evaluate the applicable potential of these isolated cells in Regenerative Endodontics.

DESIGN

Ten necrotic immature permanent teeth from seven patients were included. Evoked bleeding from periapical tissues was induced after chemical instrumentation of the root canals. Cells were isolated from the canal blood and evaluated for cell surface marker expression, multilineage differentiation potential, proliferation ability, and target protein expression. Cell sheets formed from these cells were transferred into human root segments, and then transplanted into nude mice. Histological examination was performed after eight weeks. Data analysis was conducted using one-way ANOVA followed by Tukey's post-hoc comparison, considering p < 0.05 as statistically significant.

RESULTS

The isolated cells exhibited characteristics typical of fibroblastic cells with colony-forming efficiency, and displayed Ki67 positivity and robust proliferation. Flow cytometry data demonstrated that at passage 3, these cells were positive for CD73, CD90, CD105, CD146, and negative for CD34 and CD45. Vimentin expression indicated a mesenchymal origin. Under differentiation media specific differentiation media, the cells demonstrated osteogenic, adipogenic, and chondrogenic differentiation potential. Subcutaneous root canals with cell sheets of isolated cells in nude mice showed the formation of pulp-like tissues.

CONCLUSIONS

This study confirmed the presence of progenitor cells in root canals following evoked bleeding from periapical tissues of necrotic immature teeth. Isolated cells exhibited similar immunophenotype and regenerative potential with dental mesenchymal stromal cells in regenerative endodontic therapy.

Improved Method for Dental Pulp Stem Cell Preservation and Its Underlying Cell Biological Mechanism

Dental pulp stem cells (DPSCs) are considered a valuable cell source for regenerative medicine because of their high proliferative potential, multipotency, and availability. We established a new cryopreservation method (NCM) for collecting DPSCs, in which the tissue itself is cryopreserved and DPSCs are collected after thawing. We improved the NCM and developed a new method for collecting and preserving DPSCs more efficiently. Dental pulp tissue was collected from an extracted tooth, divided into two pieces, sandwiched from above and below using cell culture inserts, and cultured. As a result, the cells in the pulp tissue migrated vertically over time and localized near the upper and lower membranes over 2-3 days. With regard to the underlying molecular mechanism, SDF1 was predominantly involved in cell migration. This improved method is valuable and enables the more efficient collection and reliable preservation of DPSCs. It has the potential to procure a large number of DPSCs stably.

A comparison study of dental pulp stem cells derived from healthy and orthodontically intruded human permanent teeth for mesenchymal stem cell characterisation

The objective of this study was to compare the characteristics of Dental Pulp Stem Cells (DPSCs) derived from healthy human permanent teeth with those that were orthodontically-intruded to serve as potential Mesenchymal Stem Cells (MSC). Recruited subjects were treated with orthodontic intrusion on one side of the maxillary first premolar while the opposite side served as the control for a period of six weeks before the dental pulp was extracted. Isolated DPSCs from both the control and intruded samples were analyzed, looking at the morphology, growth kinetics, cell surface marker profile, and multilineage differentiation for MSC characterisation. Our study showed that cells isolated from both groups were able to attach to the cell culture flask, exhibited fibroblast-like morphology under light microscopy, able to differentiate into osteogenic, adipogenic and chondrogenic lineages as well as tested positive for MSCs cell surface markers CD90 and CD105 but negative for haematopoietic cell surface markers CD34 and HLA-DR. Both groups displayed a trend of gradually increasing population doubling time from passage 1 to passage 5. Viable DPSCs from both groups were successfully recovered from their cryopreserved state. In conclusion, DPSCs in the dental pulp of upper premolar not only remained viable after 6 weeks of orthodontic intrusion using fixed appliances but also able to develop into MSCs.

Cultivation of Cryopreserved Human Dental Pulp Stem Cells—A New Approach to Maintaining Dental Pulp Tissue

Human dental pulp stem cells (hDPSCs) are multipotent mesenchymal stem cells (MSCs) that are capable of self-renewal with multilineage differentiation potential. After being cryopreserved, hDPSCs were reported to maintain a high level of proliferation and multi-differentiation abilities. In order to optimize cryopreservation techniques, decrease storage requirements and lower contamination risks, the feasibility of new whole-tooth cryopreservation and its effects on hDPSCs were tested. The survival rates, morphology, proliferation rates, cell activity, surface antigens and differentiation abilities of hDPSCs isolated from fresh teeth were compared with those of one-month cryopreserved teeth in 5% and 10% DMSO. The data of the present study indicated that the new cryopreservation approach did not reduce the capabilities or stemness of hDPSCs, with the exception that it extended the first appearance time of hDPSCs in the teeth that were cryopreserved in 10% DMSO, and reduced their recovery rate. With the novel strategy of freezing, the hDPSCs still expressed the typical surface markers of MSCs and maintained excellent proliferation capacity. Three consecutive weeks of osteogenic and adipogenic induction also showed that the expression of the key genes in hDPSCs, including lipoprotein lipase (LPL), peroxisome proliferator-activated receptor-γ (PPAR-γ), alkaline phosphatase (ALP), runt-related transcription factor 2 (RUNX2), type I collagen (COL I) and osteocalcin (OSC) was not affected, indicating that their differentiation abilities remained intact, which are crucial parameters for hDPSCs as cell-therapy candidates. These results demonstrated that the new cryopreservation method is low-cost and effective for the good preservation of hDPSCs without compromising cell performance, and can provide ideas and evidence for the future application of stem-cell therapies and the establishment of dental banks.

Different expression patterns of inflammatory cytokines induced by lipopolysaccharides from Escherichia coli or Porphyromonas gingivalis in human dental pulp stem cells

Background

Lipopolysaccharide (LPS) is one of the leading causes of pulpitis. The differences in establishing an in vitro pulpitis model by using different lipopolysaccharides (LPSs) are unknown. This study aimed to determine the discrepancy in the ability to induce the expression of inflammatory cytokines and the underlying mechanism between Escherichia coli (E. coli) and Porphyromonas gingivalis (P. gingivalis) LPSs in human dental pulp stem cells (hDPSCs).

Material and methods

Quantitative real-time polymerase chain reaction (QRT-PCR) was used to evaluate the mRNA levels of inflammatory cytokines including IL-6, IL-8, COX-2, IL-1β, and TNF-α expressed by hDPSCs at each time point. ELISA was used to assess the interleukin-6 (IL-6) protein level. The role of toll-like receptors (TLR)2 and TLR4 in the inflammatory response in hDPSCs initiated by LPSs was assessed by QRT-PCR and flow cytometry.

Results

The E. coli LPS significantly enhanced the mRNA expression of inflammatory cytokines and the production of the IL-6 protein (p < 0.05) in hDPSCs. The peaks of all observed inflammation mediators’ expression in hDPSCs were reached 3–12 h after stimulation by 1 μg/mL E. coli LPS. E. coli LPS enhanced the TLR4 expression (p < 0.05) but not TLR2 in hDPSCs, whereas P. gingivalis LPS did not affect TLR2 or TLR4 expression in hDPSCs. The TLR4 inhibitor pretreatment significantly inhibited the gene expression of inflammatory cytokines upregulated by E. coli LPS (p < 0.05).

Conclusion

Under the condition of this study, E. coli LPS but not P. gingivalis LPS is effective in promoting the expression of inflammatory cytokines by hDPSCs. E. coli LPS increases the TLR4 expression in hDPSCs. P. gingivalis LPS has no effect on TLR2 or TLR4 expression in hDPSCs.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12903-022-02161-x.

Three-dimensional printing of clinical scale and personalized calcium phosphate scaffolds for alveolar bone reconstruction

OBJECTIVE

Alveolar bone defects can be highly variable in their morphology and, as the defect size increases, they become more challenging to treat with currently available therapeutics and biomaterials. This investigation sought to devise a protocol for fabricating customized clinical scale and patient-specific, bioceramic scaffolds for reconstruction of large alveolar bone defects.

METHODS

Two types of calcium phosphate (CaP)-based bioceramic scaffolds (alginate/β-TCP and hydroxyapatite/α-TCP, hereafter referred to as hybrid CaP and Osteoink™, respectively) were designed, 3D printed, and their biocompatibility with alveolar bone marrow stem cells and mechanical properties were determined. Following scaffold optimization, a workflow was developed to use cone beam computed tomographic (CBCT) imaging to design and 3D print, defect-specific bioceramic scaffolds for clinical-scale bone defects.

RESULTS

Osteoink™ scaffolds had the highest compressive strength when compared to hybrid CaP with different infill orientation. In cell culture medium, hybrid CaP degradation resulted in decreased pH (6.3) and toxicity to stem cells; however, OsteoInk™ scaffolds maintained a stable pH (7.2) in culture and passed the ISO standard for cytotoxicity. Finally, a clinically feasible laboratory workflow was developed and evaluated using CBCT imaging to engineer customized and defect-specific CaP scaffolds using OsteoInk™. It was determined that printed scaffolds had a high degree of accuracy to fit the respective clinical defects for which they were designed (0.27 mm morphological deviation of printed scaffolds from digital design).

SIGNIFICANCE

From patient to patient, large alveolar bone defects are difficult to treat due to high variability in their complex morphologies and architecture. Our findings shows that Osteoink™ is a biocompatible material for 3D printing of clinically acceptable, patient-specific scaffolds with precision-fit for use in alveolar bone reconstructive procedures. Collectively, emerging digital technologies including CBCT imaging, 3D surgical planning, and (bio)printing can be integrated to address this unmet clinical challenge.

Cryopreservation of mesenchymal stem cells derived from dental pulp: a systematic review

Objectives

The aim of the present systematic review was to investigate the cryopreservation process of dental pulp mesenchymal stromal cells and whether cryopreservation is effective in promoting cell viability and recovery.

Materials and Methods

This systematic review was developed in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement and the research question was determined using the population, exposure, comparison, and outcomes strategy. Electronic searches were conducted in the PubMed, Cochrane Library, Science Direct, LILACS, and SciELO databases and in the gray literature (dissertations and thesis databases and Google Scholar) for relevant articles published up to March 2019. Clinical trial studies performed with dental pulp of human permanent or primary teeth, containing concrete information regarding the cryopreservation stages, and with cryopreservation performed for a period of at least 1 week were included in this study.

Results

The search strategy resulted in the retrieval of 185 publications. After the application of the eligibility criteria, 21 articles were selected for a qualitative analysis.

Conclusions

The cryopreservation process must be carried out in 6 stages: tooth disinfection, pulp extraction, cell isolation, cell proliferation, cryopreservation, and thawing. In addition, it can be inferred that the use of dimethyl sulfoxide, programmable freezing, and storage in liquid nitrogen are associated with a high rate of cell viability after thawing and a high rate of cell proliferation in both primary and permanent teeth.

Investigation of the effect of a time delay on the characteristics and survival of dental pulp stem cells from extracted teeth

OBJECTIVES

This study investigates the post-extraction storage period of human dental pulp stem cells (hDPSCs) for stem cell banking by investigating the viability, function, mineralization, and gene expression of hDPSCs isolated from extracted teeth after 1 h, 6 h and 24 h post-tooth extraction.

DESIGN

hDPSCs were extracted from the pulp of impacted third molar teeth after 1 h, 6 h, and 24 h after extraction. The mesenchymal stem cell (MSCs) properties of three groups of cells were analyzed using flow cytometry. Cell morphology and proliferation were analyzed using a light microscope and an MTT assay. The viability, function, mineralization, and gene expression of hDPSCs of 1 h, 6 h, and 24 h groups were also assessed.

RESULTS

The delayed harvesting of hDPSCs for 1, 6 or 24 h caused a 31 % reduction in mineral nodule formation and a reduction in the gene expression of osteocalcin (OCN) and vascular endothelial growth factor-alpha (VEGFA). However, the 1, 6 or 24 h, time delay had little effect on MTT cell proliferation, cell viability or morphology. The delayed of harvesting of hDPSCs for 1, 6 or 24 h also had little effect on the expression of MSCs positive (CD44, CD106, CD90) or negative surface markers (CD45 and CD11b).

CONCLUSIONS

Our results suggest that a 24 h delay in harvesting hDPSCs from extracted teeth can reduce their mineralization and gene activity but does not markedly reduce survival. Quicker hDPSCs harvesting is likely to yield more useful hDPSCs for experimentation and clinical treatment.

Success rates in isolating mesenchymal stem cells from permanent and deciduous teeth

Stem cells from human exfoliated deciduous teeth (SHED) and human dental pulp stem cells (hDPSCs) have emerged as attractive cell sources for bone regeneration. However, the specific teeth and the conditions most suitable for stem cell isolation remain unclear. Therefore, the success rate of SHED and hDPSCs isolation, the patient age and remaining root length in deciduous teeth were evaluated. Successful isolation was defined as when the cell culture was maintained up to the third passage without any contamination or other issues. Remaining tooth length was calculated using the root-to-crown ratio from patient X-rays and compared to the norm value from the literature. The overall successful isolation rate of SHED and hDPSCs was 82% and 70%. The average patient ages at extraction of the deciduous teeth and permanent teeth were 11 years and 9 months, and 22 years and 10 months respectively. In the successful SHED group, the average remaining root length of the anterior deciduous teeth was 71.4%, and that of the deciduous molars was 61.4%. Successful isolation appears to be associated with patient age, length of the remaining root, and also mechanical stress and other factors. Tooth selection criteria need to be identified to improve the success rate.

High-fluence low-power laser irradiation promotes odontogenesis and inflammation resolution in periodontitis by enhancing stem cell proliferation and differentiation

Periodontitis can exert a severe impact on the life of patients, and the use of stem cell therapy for this disease is promising. The inflammatory response consequent to periodontitis can promote stem cell proliferation. Activated inflammation triggers inhibitory cytokine secretion, thus reducing inflammation subsequent to stem cell activation. High-fluence low-power laser irradiation (HF-LPLI) has the ability to regulate stem cell function through its effect on inflammation. Thus, the aim of the present study was to examine whether HF-LPLI is able to activate stem cells to promote regeneration in periodontitis by promoting inflammation resolution, as well as to evaluate the underlying mechanism of action if an effect is observed. Stem cells were treated with HF-LPLI following inflammation activation. Reverse transcription-quantitative polymerase chain reaction and EdU assay were used to evaluate cell proliferation and differentiation. Flow cytometry and immunofluorescence were also used to detect the ability of HF-LPLI to regulate the surrounding inflammatory environment. Animal models of periodontal disease were treated with stem cells and HF-LPLI, and regeneration was detected by hematoxylin and eosin staining and in vivo imaging. It was observed that HF-LPLI promoted inflammation resolution by reducing the excessive inflammatory response, and finally stimulated stem cell proliferation and differentiation. Furthermore, in vivo results revealed that stem cells treated with HF-LPLI induced bone regeneration. HF-LPLI stimulated stem cell proliferation and differentiation by promoting inflammation resolution subsequent to stem cell activation, providing a new strategy for the clinical treatment of periodontitis.

Dental Mesenchymal Stem Cell-Based Translational Regenerative Dentistry: From Artificial to Biological Replacement

Dentistry is a continuously changing field that has witnessed much advancement in the past century. Prosthodontics is that branch of dentistry that deals with replacing missing teeth using either fixed or removable appliances in an attempt to simulate natural tooth function. Although such "replacement therapies" appear to be easy and economic they fall short of ever coming close to their natural counterparts. Complications that arise often lead to failures and frequent repairs of such devices which seldom allow true physiological function of dental and oral-maxillofacial tissues. Such factors can critically affect the quality of life of an individual. The market for dental implants is continuously growing with huge economic revenues. Unfortunately, such treatments are again associated with frequent problems such as peri-implantitis resulting in an eventual loss or replacement of implants. This is particularly influential for patients having co-morbid diseases such as diabetes or osteoporosis and in association with smoking and other conditions that undoubtedly affect the final treatment outcome. The advent of tissue engineering and regenerative medicine therapies along with the enormous strides taken in their associated interdisciplinary fields such as stem cell therapy, biomaterial development, and others may open arenas to enhancing tissue regeneration via designing and construction of patient-specific biological and/or biomimetic substitutes. This review will overview current strategies in regenerative dentistry while overviewing key roles of dental mesenchymal stem cells particularly those of the dental pulp, until paving the way to precision/translational regenerative medicine therapies for future clinical use.

Dental Pulp Tissue Regeneration Using Dental Pulp Stem Cells Isolated and Expanded in Human Serum

INTRODUCTION

Dental pulp-derived stem cells (DPSCs) have the potential to regenerate dentin and dental pulp tissue because of their differentiation capacity and angiogenic properties. However, for regenerative approaches to gain regulatory and clinical acceptance, protocols are needed to determine more feasible ways to cultivate DPSCs, namely, without the use of xenogeneic-derived components (animal sera) and exogenous growth factors.

METHODS

In this study, human DPSCs were isolated from third molars and expanded in standard culture conditions containing fetal bovine serum (DPSCs-FBS) or conditions containing human serum (DPSCs-HS). After cell characterization and evaluation of their angiogenic secretome, DPSCs were seeded in tooth slice/scaffolds and implanted subcutaneously into immunodeficient mice. After 30 days, tooth slices were retrieved and evaluated for dental pulp tissue regeneration. Immunohistochemistry and confocal microscopy were used to quantify blood vessel formation and evaluate predentin and dentin formation.

RESULTS

After culture, DPSCs-HS produced concentrations of angiogenic growth factors equivalent to DPSCs-FBS. Additionally, in DPSCs-HS, several angiogenic factors were produced in at least 1-fold higher concentrations than in DPSCs-FBS. In vivo, it was determined that DPSCs-HS produced a robust angiogenic response and regeneration of dentin equivalent to DPSCs-FBS.

CONCLUSIONS

These findings show that DPSCs can be isolated and expanded to clinical scale numbers in media devoid of animal serum or exogenous growth factors and still maintain their pulp regenerative properties. The implications of these findings are significant for further development of clinical protocols using DPSCs in cell therapies.

Pooled Human Serum Increases Regenerative Potential of In Vitro Expanded Stem Cells from Human Extracted Deciduous Teeth

In regenerative therapy, in vitro expansion of stem cells is critical to obtain a significantly higher number of cells for successful engraftment after transplantation. However, stem cells lose its regenerative potential and enter senescence during in vitro expansion. In this study, the influence of foetal bovine serum (FBS) and pooled human serum (pHS) on the proliferation, morphology and migration of stem cells from human extracted deciduous teeth (SHED) was compared. SHED (n = 3) was expanded in KnockOut DMEM supplemented with either pHS (pHS-SM) or FBS (FBS-SM). pHS was prepared using peripheral blood serum of six healthy male adults, aged between 21 and 35 years old. The number of live SHED was significantly higher, from passage 5 to 7, when cultured in pHS-SM compared to those cultured in FBS-SM (p < 0.05). Number of cells having flattened morphology, characteristics of partially differentiated and senescent cells, was significantly lower (p < 0.05) in pHS-SM (3%) compared to those in FBS-SM (7%). Furthermore, migration of SHED in pHS-SM was found to be more directional. The presence of selected ten paracrine factors known for their proliferation and migration potential was detected in all six individual human sera, used to produce pHS, none of which were detected in FBS. Ingenuity Pathway Analysis showed the possible involvement of the 'ephrin receptor signalling pathway' to regulate the proliferation and migration of SHED in pHS-SM. In conclusion, pHS-SM showed significantly higher proliferation rate and could maintain significantly lower number of senescent cells and support directional migration of cells.

Stem Cells of Dental Origin: Current Research Trends and Key Milestones towards Clinical Application

Dental Mesenchymal Stem Cells (MSCs), including Dental Pulp Stem Cells (DPSCs), Stem Cells from Human Exfoliated Deciduous teeth (SHED), and Stem Cells From Apical Papilla (SCAP), have been extensively studied using highly sophisticated in vitro and in vivo systems, yielding substantially improved understanding of their intriguing biological properties. Their capacity to reconstitute various dental and nondental tissues and the inherent angiogenic, neurogenic, and immunomodulatory properties of their secretome have been a subject of meticulous and costly research by various groups over the past decade. Key milestone achievements have exemplified their clinical utility in Regenerative Dentistry, as surrogate therapeutic modules for conventional biomaterial-based approaches, offering regeneration of damaged oral tissues instead of simply “filling the gaps.” Thus, the essential next step to validate these immense advances is the implementation of well-designed clinical trials paving the way for exploiting these fascinating research achievements for patient well-being: the ultimate aim of this ground breaking technology. This review paper presents a concise overview of the major biological properties of the human dental MSCs, critical for the translational pathway “from bench to clinic.”

Toll-like Receptor Expression Profile of Human Dental Pulp Stem/Progenitor Cells

INTRODUCTION

Human dental pulp stem/progenitor cells (DPSCs) show remarkable regenerative potential in vivo. During regeneration, DPSCs may interact with their inflammatory environment via toll-like receptors (TLRs). The present study aimed to depict for the first time the TLR expression profile of DPSCs.

METHODS

Cells were isolated from human dental pulp, STRO-1-immunomagnetically sorted, and seeded out to obtain single colony-forming units. DPSCs were characterized for CD14, CD34, CD45, CD73, CD90, CD105, and CD146 expression and for their multilineage differentiation potential. After incubation of DPSCs in basic or inflammatory medium (interleukin-1β, interferon-γ, interferon-α, tumor necrosis factor-α), TLR expression profiles were generated (DPSCs and DPSCs-i).

RESULTS

DPSCs showed all characteristics of stem/progenitor cells. In basic medium DPSCs expressed TLRs 1-10 in different quantities. The inflammatory medium upregulated the expression of TLRs 2, 3, 4, 5, and 8, downregulated TLRs 1, 7, 9, and 10, and abolished TLR6.

CONCLUSIONS

The current study describes for the first time the distinctive TLR expression profile of DPSCs in uninflamed and inflamed conditions.

Manufacturing of dental pulp cell-based products from human third molars: current strategies and future investigations

In recent years, mesenchymal cell-based products have been developed to improve surgical therapies aimed at repairing human tissues. In this context, the tooth has recently emerged as a valuable source of stem/progenitor cells for regenerating orofacial tissues, with easy access to pulp tissue and high differentiation potential of dental pulp mesenchymal cells. International guidelines now recommend the use of standardized procedures for cell isolation, storage and expansion in culture to ensure optimal reproducibility, efficacy and safety when cells are used for clinical application. However, most dental pulp cell-based medicinal products manufacturing procedures may not be fully satisfactory since they could alter the cells biological properties and the quality of derived products. Cell isolation, enrichment and cryopreservation procedures combined to long-term expansion in culture media containing xeno- and allogeneic components are known to affect cell phenotype, viability, proliferation and differentiation capacities. This article focuses on current manufacturing strategies of dental pulp cell-based medicinal products and proposes a new protocol to improve efficiency, reproducibility and safety of these strategies.

Reactive Oxygen Species in Mesenchymal Stem Cell Aging: Implication to Lung Diseases

MSCs have become an emerging cell source with their immune modulation, high proliferation rate, and differentiation potential; indeed, they have been challenged in clinical trials. Recently, it has shown that ROS play a dual role as both deleterious and beneficial species depending on their concentration in MSCs. Various environmental stresses-induced excessive production of ROS triggers cellular senescence and abnormal differentiation on MSCs. Moreover, MSCs have been suggested to participate in the treatment of ALI/ARDS and COPD as a major cause of high morbidity and mortality. Therapeutic mechanisms of MSCs in the treatment of ARDS/COPD were focused on cell engraftment and paracrine action. However, ROS-mediated therapeutic mechanisms of MSCs still remain largely unknown. Here, we review the key factors associated with cell cycle and chromatin remodeling to accelerate or delay the MSC aging process. In addition, the enhanced ROS production and its associated pathophysiological pathways will be discussed along with the MSC senescence process. Furthermore, the present review highlights how the excessive amount of ROS-mediated oxidative stress might interfere with homeostasis of lungs and residual lung cells in the pathogenesis of ALI/ARDS and COPD.

Production of Human Dental Pulp Cells with a Medicinal Manufacturing Approach

INTRODUCTION

Human dental pulp cells (HDPCs) are generally isolated and cultured with xenogeneic products and in stress conditions that may alter their biological features. However, guidelines from the American Food and Drug Administration and the European Medicines Agency currently recommend the use of protocols compliant with medicinal manufacturing. Our aim was to design an ex vivo procedure to produce large amounts of HDPCs for dentin/pulp and bone engineering according to these international recommendations.

METHODS

HDPC isolation was performed from pulp explant cultures. After appropriate serum-free medium selection, cultured HDPCs were immunophenotyped with flow cytometry. Samples were then cryopreserved for 510 days. The post-thaw cell doubling time was determined up to passage 4 (P4). Karyotyping was performed by G-band analysis. Osteo/odontoblastic differentiation capability was determined after culture in a differentiation medium by gene expression analysis of osteo/odontoblast markers and mineralization quantification.

RESULTS

Immunophenotyping of cultured HDPCs revealed a mesenchymal profile of the cells, some of which also expressed the stem/progenitor cell markers CD271, Stro-1, CD146, or MSCA-1. The post-thaw cell doubling times were stable and similar to fresh HDPCs. Cells displayed no karyotype abnormality. Alkaline phosphatase, osteocalcin, and dentin sialophosphoprotein gene expression and culture mineralization were increased in post-thaw HDPC cultures performed in differentiation medium compared with cultures in control medium.

CONCLUSIONS

We successfully isolated, cryopreserved, and amplified human dental pulp cells with a medicinal manufacturing approach. These findings may constitute a basis on which to investigate how HDPC production can be optimized for human pulp/dentin and bone tissue engineering.