Reciprocating Versus Rotary Systems for Root Filling Removal: Assessment of the Apically Extruded Material

Evaluation of shaping ability, apical transportation and centering ratio of T-Endo Must, WaveOne Gold, and Trunatomy in resin blocks

Purpose

This study aimed to compare the shaping abilities of different nickel-titanium file systems.

Materials and Methods

Sixty-six j-shaped resin blocks were randomly divided into three groups (n = 22): Group T-Endo MUST (TE), Group WaveOne (W), Group TruNatomy (TR). After canal preparation, the amount of material removed from the canal, the centering ratio of the file systems, the direction and amount of canal transportation, and shaping errors were evaluated. Shaping time was calculated. Data of shaping time were analyzed with ANOVA and Tamhane test. Data on the shaping ability were analyzed with two- and three-way ROBUST ANOVA. The significance level was set at p = 0.05.

Results

There was a statistically significant difference between all groups for shaping time (p < 0.001). There was a statistically significant difference between groups for the total amount of material removed (p < 0.001). The directions of canal transportation were the inner surface of the curvature for W and TR and the outer for TE. There was no statistically significant difference between the groups for the amount of transportation (p > 0.05). The centering ratio of TE and W was statistically higher than TruNatomy (p < 0.001).

Conclusions

TruNatomy removed the least material that supported the minimally invasive endodontic approach. All file systems caused similar transportation and did not change the original canal shape.

Evaluation of apically extruded debris during root canal filling material removal in teeth with external apical root resorption: a comparison of different obturation techniques

BACKGROUND

Root canal retreatment is necessary when initial treatment fails. Nickel-titanium systems help remove filling materials; however, some methods can cause canal content extrusion, resulting in inflammation and delayed healing. This study aimed to examine the impact of different preparation techniques and endodontic file systems on apical debris volume to limit material dispersion to periradicular tissues.

METHODS

Ninety extracted maxillary incisors were evaluated. Simulated apical root resorption was created by removing the apical 2 mm of the root. The teeth were divided into two groups: one filled with a single cone and the other with cold lateral compaction (CLC). Each group was further divided into three subgroups (n = 15 each): Subgroup 1 used Reciproc R25 for removal and R50 for final preparation; Subgroup 2 used ProTaper Universal Retreatment (PTUR) files D1, D2, and D3 for removal and ProTaper Next X5 for finalization; and Subgroup 3 used VDW.Rotate Retreatment (VDW.RotateR) for removal and VDW.Rotate 50.04 for completion. Debris from retreatment was collected in pre-weighed tubes to determine the amount. The apical extrusion data underwent a two-way analysis of variance.

RESULTS

The Reciproc group had a mean extruded debris weight of 0.54 ± 0.24 mg, higher than the PTUR (0.28 ± 0.15 mg) and VDW.RotateR (0.39 ± 0.29 mg) groups (p < 0.05). The single-cone technique (SCT) resulted in a mean debris weight of 0.34 ± 0.23 mg, lower than the CLC technique, which had a mean of 0.46 ± 0.27 mg (p < 0.05). SCT had a shorter retreatment duration (111.12 ± 33.46 s) compared to CLC (176.26 ± 52.26 s) (p < 0.05).

CONCLUSION

The Reciproc file system and the CLC obturation technique resulted in greater apical debris extrusion than the other methods. SCT was quicker than CLC. The Reciproc groups are more susceptible to apex extrusion during retreatment.

The effect of irrigation solution temperature and novel heat-treated rotary files on apical debris extrusion and canal preparation time

This study aimed to compare apical debris extrusion and canal preparation time with ProTaper Gold (PTG) and ProTaper Ultimate (PTU) files at different temperatures. Mesio-buccal roots of 60 mandibular first molars were distributed into six groups depending on the file type (PTG, PTU) and irrigation solution temperature (20, 37, 45°C). During instrumentation, extruded debris were collected and weighed to measure the mass in milligrams. The canal preparation time was recorded in seconds. ANOVA followed by Bonferroni post-hoc tests were used for analysis. The amount of debris extrusion was significantly higher in PTU, which was affected by the irrigation solution temperature (p < 0.05). The difference in canal preparation time was not significant between the two file systems, however, it was significant between the different temperatures (p = 0.001). Both file systems had shorter canal preparation times at 20°C. The irrigation solution temperature could influence the debris extrusion and time of canal preparation.

Assessment of apical extrusion in regenerative endodontics: a comparative study of different irrigation methods using three-dimensional immature tooth models

To investigate the apical extrusion of sodium hypochlorite in immature permanent teeth caused by conventional syringe irrigation (CSI), EDDY, XP-endo Finisher file (XP-F), and a new laser irrigation activation system [shock-wave-enhanced-emission-photo-acoustic-streaming (SWEEPS)]. Three-dimensionally printed forty-nine teeth with immature central incisor morphology were randomly assigned to seven experimental groups, based on the irrigation activation methods and insertion depths (1 mm and 2 mm short of the working length) as follows: CSI-1, CSI-2, EDDY-1, EDDY-2, XP-1, XP-2, and SWEEPS. Prior to the irrigation activation process, samples were placed in metacresol mixed agar gel in Eppendorf tubes. To evaluate NaOCI extrusion into the gel, each sample was digitally photographed, and the area of apical extrusion was analyzed using ImageJ software. To examine potential significant differences between the continuous variables, the Mann-Whitney U test and Kruskal-Wallis H test, were applied (P = .05). The SWEEPS resulted in a greater amount of apical extrusion compared to the CSI method, regardless of the insertion depth (P < 0.001). The SWEEPS resulted in greater apical extrusion scores compared to EDDY-2 (P < 0.001). The EDDY-1 resulted in greater amount of apical extrusion scores compared to EDDY-2 (P < 0.001). This study, the first to show the effect of the novel SWEEPS technology on NaOCI extrusion, found that irrigation activation can cause different levels of apical extrusion depending on the method and distance from the working length. It is crucial to consider the potential occurrence of apical extrusion when applying activation methods to immature teeth.

Effect of treatment variables on apical extrusion of debris during root canal retreatment: A systematic review and meta-analysis of laboratory studies

Background

This study aimed to systematically and comprehensively review the effect of various treatment variables on apically extruded debris (AED) during non-surgical root canal retreatment (NSRCRT).

Methods

The study protocol is shared in the Open Science Framework database (https://osf.io/kjtdg/?view_only=17060180705745ec9dae9a01614f3880). An electronic search was conducted up to July 2022 to reveal related studies. Two reviewers critically assessed the studies for eligibility against inclusion and exclusion criteria and data extraction. Quantitative data synthesis was performed, and the risk of bias in the studies was also evaluated.

Results

Forty-six studies were included in the systematic review and 14 in the meta-analysis. Conflicting or limited evidence was found for the effect of sealer type, obturation technique, and solvent use. The manual instrumentation increased the amount of AED compared to rotary instrumentation during the removal of filling materials (P<0.001). There was no significant difference in the amount of AED between the use of rotary and reciprocating files during the removal of filling materials (P=0.181).

Conclusion

Rotary instruments can be recommended instead of manual instruments during the removal of filling materials to control the amount of AED. Further studies with a low risk of bias are needed to clarify the effect of other treatment variables on AED during NSRCRT.

Comparative Evaluation of Debris Expulsion Beyond Apex During Re-root Canal Treatment by Utilizing Two Re-treatment Rotary Files and Two Reciprocating Files: An In-Vitro Study

AIM

This study aimed to assess and compare debris quality expelled beyond the apex during re-treatment using two reciprocating and two re-treatment rotary files.

MATERIALS AND METHODS

A total of 80 healthy human mandibular premolars excised for orthodontic therapy were selected. Distilled water was used to sterilize the teeth before they were preserved. The canals were widened and coronal access was created so that the F2 ProTaper universal system could be used. For the obturation, we utilized gutta-percha cones and AH plus sealant. All samples were cone-beam computed tomography (CBCT) recorded. Teeth were separated into four groups (n=20); Group 1: ProTaper re-treatment, Group 2: Mtwo re-treatment, Group 3: WaveOne gold, and Group 4: Reciproc. The re-instrumented process included collecting the extruded debris in Eppendorf tubes and then drying it off by evaporating the distilled water. The weight of the tube with debris was subtracted from the weight of the tube without debris to get the dry debris weight. Post-retreatment CBCT was recorded for all samples. Mean apical debris extrusion values were obtained, after which necessary statistical analysis was obtained using SPSS Statistics, version 21 (IBM Corp., Armonk, NY) to obtain the results. A one-way analysis of variance (ANOVA) and the student t-test were utilized for statistical analysis to compare the different experimental groups. Post-hoc Bonferroni tests were used to compare several groups.

RESULT

No statistical difference (p>0.05) was identified in the filler material that was left over across all groups. The reciprocating files discharged more material compared with re-treatment file systems.

CONCLUSION

The Reciproc files expelled more waste than WaveOne gold, ProTaper re-treatment, and Mtwo re-treatment file systems. Reciprocating file systems showed better cleaning efficiency compared to the re-treatment file systems.

Intracanal removal and apical extrusion of filling material after retreatment using rotary or reciprocating instruments: A new approach using human cadavers

AIM

This study compared intracanal removal of filling as well as the frequency and volume of extruded material after retreatment with either HyFlex or Reciproc instruments in mandibular teeth from cadavers.

METHODOLOGY

The root canals of 14 pairs of contralateral single-rooted teeth in mandibles of cadavers were instrumented with Reciproc R40 and filled using lateral compaction. The mandibles were scanned in a micro-computed tomographic (micro-CT) device before and after retreatment procedures. The contralateral teeth were assigned to two groups (n = 14) according to the retreatment protocol using either HyFlex or Reciproc instrument systems. In the HyFlex group, the HyFlex Remover instrument was worked 3 mm short of the working length (WL), followed by HyFlex CM 40.04 and 50.04 at the WL. In the Reciproc group, the R50 instrument was worked up at the coronal two thirds, followed by two more cycles until the WL was reached. Pre- and post-operative micro-CT images were analysed for extrusion and intracanal removal of filling material.

RESULTS

After retreatment, extrusion of filling material occurred in 11 (78%) and 14 (100%) teeth from HyFlex and Reciproc groups respectively (p > .05). A similar volume of extruded material was observed after retreatment with both systems (p > .05). A significant decrease in the intracanal filling volume was verified after retreatment with both tested systems (p < .05). However, residual filling material was found in all root canals, regardless of the system. The amount of filling material removed (HyFlex = 80.8%; Reciproc = 65.9%) and the operation time was similar between systems (p > .05).

CONCLUSIONS

A high frequency of filling material extrusion was observed after retreatment with the two systems in a cadaver model, with no significant difference between them. Both protocols obtained similar efficacy in filling material removal procedures, although none completely cleaned the canals.

Assessing the impact of obturation techniques, kinematics and irrigation protocols on apical debris extrusion and time required in endodontic retreatment

The aim of the study was to evaluate the impact of kinematics and irrigation protocols on the extrusion of apical debris during removal of different obturation techniques. A total of 144 single-rooted teeth were instrumented and obturated with Thermafil+AH Plus, Thermafil+AH Plus Bioceramic and single gutta-percha cone+AH Plus Bioceramic. Samples were divided according to the retreatment kinematics: continuous rotation or Jeni motion. Each sub-group was subjected to conventional irrigation or irrigation activated by EDDY. Extruded debris was collected in Eppendorf tubes, weighted and retreatment time was digitally recorded. Data were analysed with two-way ANOVA (p < 0.05). Debris extrusion was not significantly different between all groups. EDDY activation system and CanalPro Jeni required significantly longer time compared with other groups to remove Thermafil+AH Plus and single cone+AH Plus Bioceramic. Within current limitations, obturation technique, irrigation protocol and kinematics tested had no influence on apical extrusion debris, while they significantly impacted the retreatment time.

In vitro evaluation of filling material removal and apical debris extrusion after retreatment using Reciproc blue, Hyflex EDM and ProTaper retreatment files

OBJECTIVES

To evaluate the amount of remaining filing material and apical debris extrusion after retreatment using Reciproc Blue, Hyflex EDM and ProTaper Retreatment Files.

MATERIALS AND METHODS

Thirty-six extracted permanent mandibular first molars with moderately curved mesial roots were selected. Mesiobuccal canals were prepared using the ProTaper Next system up to size X2 and filled using gutta-percha and Adseal sealer via cold lateral compaction. Teeth were randomly divided into three equal groups (n = 12): Group 1: Reciproc Blue (RB)(VDW, Germany), Group 2: Hyflex EDM (HEDM)(Coltene/Whaledent, Switzerland), Group 3: ProTaper Universal Retreatment file system + ProTaper Next file system (PTUR + PTN)( Dentsply Maillefer, Switzerland). Eppendorf tubes were used to collect the apically extruded debris. Cone-beam computed tomographic scans were taken prior to and after retreatment and the volume of remaining filling material was assessed at the coronal, middle and apical levels. Statistical analysis was performed using the Kruskal-Wallis test, Friedman's test and Wilcoxon Sign Rank test. Significance level was set at p value 0.05.

RESULTS

There were no statistically significant differences among the three groups in the reduction of the volume of the filling material or in the amount of apically extruded debris.

CONCLUSION

All the tested filing systems showed similar efficacy in removing the filling material, however, none of them could achieve its complete removal. Apical extrusion of debris occurred with all the systems used with no significant difference between the three groups.

Comparative evaluation of apical debris extrusion during root canal preparation using three different rotary file systems

Background: Endodontic success depends on the complete cleaning and shaping of the root canal. In order to achieve this goal, debris removal is essential. Even with improvements in instrument design, apical debris extrusion continues to be a cause of periradicular inflammation. The current study aimed to compare the amount of apically extruded debris throughout the canal instrumentation with TruNatomy, ProTaper Next, 2Shape rotary systems. Methods: A total of 60 freshly extracted single‑rooted mandibular premolars were used. An access opening was made, and a working length was estimated. The samples were arbitrarily allocated into three groups i.e. Group I: TruNatomy (n = 20), Group II: ProTaper Next (n = 20), Group III: 2Shape (n = 20). During the canal instrumentation, the extruded debris were collected in preweighed Eppendorf tubes. Post-instrumentation, the tubes were placed in a hot air oven at 140°C for five hours. For calculating the dry debris weight, the tube's pre-instrumentation weight was deducted from the post-instrumentation weight. The data was analysed using one‑way analysis of variance and post hoc Tukey's test. Results: Extrusion of debris was noted in all the specimens. TruNatomy rotary system showed least debris extrusion in comparison to ProTaper Next and 2Shape (P < 0.05). However, the results were statistically non-significant between ProTaper Next and 2Shape (P > 0.05). Conclusions: It was noted that all instruments apically extruded debris, with TruNatomy system being related to minimum extrusion.

Apically extruded debris of different file systems used with various kinematic movements during retreatment: An in vitro study

This study aimed to examine the amount of apically extruded debris and time during retreatment with five current file systems, which exhibit various kinematic movements. One hundred upper central incisors were shaped with manual files and filled using the thermoplastic injection method. The root canal fillings in each group (n = 20) were removed using the Genius (GN), ProTaper Next (PTN), Reciproc (RCP) Blue, Tango-Endo (TE) and Twisted File Adaptive (TFA) file systems. The apically extruded debris was collected in preweighed Eppendorf tubes. Time to reach working length and total time were also recorded. The PTN, RCP Blue and TFA instruments caused significantly less apically extruded debris and shorter total retreatment time than the GN and TE file systems (p < 0.05). The time to reach the working length was the shortest in the PTN group compared to the other groups (p < 0.05). All file systems extruded debris while removing the root canal filling.

Effect of different retreatment files using different kinematics on the release of inflammatory mediators in root canal retreatment of single-rooted teeth: a randomized clinical trial

OBJECTIVES

This randomized clinical trial aimed to evaluate the effect of two rotaries (ProTaper Universal Retreatment (PTUR)), D-Race (DR) + XP-Endo Finisher R (XPFR) and one reciprocating (Reciproc Blue (RB) retreatment techniques on the release of neuropeptides (Substance P, calcitonin gene-related peptide (CGRP)), and cytokines (IL-6 and IL-10) in periapical fluid in root canal retreatment of single-rooted teeth.

MATERIALS AND METHODS

In this randomized clinical trial (ClinicalTrials.gov ID: NCT05039502), seventy-five patients scheduled for retreatment were randomly divided into 3 groups according to the file system used to remove root canal filling materials (n = 25): PTUR, RB, and DR + XPFR. After reshaping and disinfection of the root canals, periapical fluid samples were taken, and the levels of Substance P, CGRP, IL-6, and IL-10 were measured by enzyme-linked immunosorbent assay (ELISA) test. Data were analyzed using the Kruskal-Wallis and chi-square tests. The level of significance was set as p = 0. 05.

RESULTS

All the allocated participants received the intervention and were analyzed. There was no statistically significant difference among groups in terms of gender, age, tooth localization, and the distribution of analgesic use after treatment (p values 0.799, 0.095, 0.637, 1.000, respectively). No statistically significant difference was found in terms of the levels of Substance P, CGRP, and IL-10 among groups (p > .05), except IL-6.

CONCLUSIONS

PTUR, RB, and DR + XPFR files have comparable results in the expression of inflammatory mediators.

CLINICAL RELEVANCE

Retreatment files powered with rotary or reciprocating motion produced similar neuropeptide and cytokine levels in patients.

Evaluation of Apically Extruded Debris and Cleaning Efficiency of the Pediatric Rotary File System and the Manual Nickel-Titanium File System

Background This study aimed to assess and compare the Kidzo pediatric rotary file system with the manual nickel-titanium (NiTi) K-file system used for preparing the root canal of primary mandibular second molars by measuring the total apically extruded debris utilizing a sensitive microbalance and assessing cleaning efficiency using a scanning electron microscope. Methodology A total of 46 mandibular second primary molars were instrumented using a pediatric rotary system (Elephant Kidzo, India) and a manual NiTi K-file system (Endostar, Poldent, Poland). The debris released from the apex was retrieved and dried in Eppendorf tubes that were weighed beforehand. The total extruded debris was determined using a digital electronic scale, following which the molar roots were vertically sectioned, and the canal walls were investigated at the apical, middle, and coronal levels by a scanning electron microscope for debris and smear layer. Results The Kidzo pediatric rotary file system extruded a lesser amount of debris than the manual Endostar file system, but the difference was statistically not significant. Regarding cleaning efficiency, the debris originating in the apical and middle regions by employing the rotary filing technique was significantly less (p < 0.05); however, at the coronal level, there were no notable differences. Conclusions The Kidzo pediatric rotary system produced less apically extruded debris than the manual system and demonstrated better cleaning efficiency.

Effect of EDDY and manual dynamic activation techniques on postoperative pain in non-surgical retreatment: a randomized controlled trial

BACKGROUND

During non-surgical retreatment process, the products such as dentin debris, root canal fillings, irrigation solutions, microorganisms and remaining pulp tissues can extrude to the apical area and can cause the postoperative pain and flare-up. Thus, the aim of this study was to evaluatethe effect of EDDY and manual dynamic activation (MDA) techniques on postoperative pain (PP) associated with retreatment.

METHODS

Ninety patients scheduled for retreatment were treated at a single visit. Non-vital mandibular premolar teeth diagnosed with asymptomatic apical periodontitis were included in this study. The patients were divided into two groups (n = 45) on the basis of the need for additional irrigation activation procedures (EDDY and MDA). The patients' post-treatment pain levels were asked to rate the intensity of their pain on a 10-point numerical rating scale (NRS) at the 12th, 24th, 48th, and 72nd h and 7 days.The data were analyzed using the chi-square and Wilcoxon signed-rank test was used for within-group comparisons and Mann Whitney U test was used to compare the groups by time period.

RESULTS

The difference in postoperative pain intensity between two groups was statistically significant at 12, 24, 48, and 72 h (p < 0.05). There was no significant difference at 7 days. Moreover, no statistically significant difference was found between the two groups in terms of gender and analgesic medication intake (p > 0.05). Pain intensity after the treatment was lesser in the MDA groupthanin the EDDY group at 12, 24, 48, and 72 h.

CONCLUSION

This study could lead us to conclude that the two activation systems can be used during endodontic retreatment with no difference at PP 7 days later. However, a comparison of the groups indicated that the EDDY resulted in significantly more PP at 12, 24, 48, and 72 h. Trial registration ClinicalTrials.gov Identifier: NCT04726670.

Quantitative Assessment of Apically Extruded Debris after Single-Files Supplemental Retreatment considering Apical Patency Influence: In Vitro Study

Objective

This study aims to assess the impact of re-establishing apical patency on the quantity of debris extruded through the apex after three supplementary retreatment files (TruNatomy (TRN), WaveOne Gold (WOG), and XP endo Finisher R (XPFR)).

Materials and Methods

Eighty single-rooted mandibular premolars were prepared with ProTaper Universal rotary systems (PTU) up to F3 and obturated. The samples were divided into two main groups according to the presence or absence of the apical patency (n = 40), GI with apical patency and GII without apical patency. Based on the file system, which was adopted to eliminate the previous filling, each group had four subgroups (n = 10). In GI PTUR and GII PTUR, ProTaper Universal retreatment files (PTUR) were utilized only to remove the most primary filling material (control groups). In the other groups (PTUR) used, it was first followed by supplementary files. The quantity of debris extruded by different retreatment file systems was determined and compared to the corresponding control group with or without apical patency. Data were analyzed using a two-way ANOVA with a post hoc Tukey's multiple comparison test at a 5% significance level.

Results

There was a statistically significant difference among the control and experimental groups. XPFR had the least quantity of extruded debris. Apical patency did not affect the debris extrusion.

Conclusion

All tested files led to a significant apical debris extrusion regardless of apical patency.

The Efficacy of Er:YAG Laser-Activated Shock Wave-Enhanced Emission Photoacoustic Streaming Compared to Ultrasonically Activated Irrigation and Needle Irrigation in the Removal of Bioceramic Filling Remnants from Oval Root Canals-An Ex Vivo Study

The removal of filling material is important for successful root canal retreatment. The aim of the study was to compare the efficiency of two activated irrigation techniques, the shock wave-enhanced emission photoacoustic streaming (SWEEPS) mode of the Er:YAG laser and ultrasonically activated irrigation (UAI) and a conventional syringe-needle technique (SNI), in the removal of bioceramic sealer/gutta-percha during conventional retreatment in oval root canals. The study sample consisted of distal root canals of 42 extracted human mandibular molars, which were prepared using a ProTaper Next system up to size 40/0.06 and filled with bioceramic sealer using a single-cone obturation technique. The teeth were then re-treated with a Reciproc Blue RB40 file and 3% sodium hypochlorite solution. The prepared teeth were randomly divided into three groups (n = 14 per group) and subjected to one of the three irrigation methods. Micro-CT scans were performed at different stages to assess the amount of filling material after each retreatment phase. The results of the study showed that all the tested irrigation techniques reduced a statistically significant amount of the remnant filling material at retreatment (p < 0.05), and there were no statistically significant differences in efficacy between the three methods. All tested techniques had similar efficacy in the removal of the remaining filling remnants.

Quantitative evaluation of apically extruded debris using TRUShape, TruNatomy, and WaveOne Gold in curved canals

Objective

This study compared the quantity of extruded debris after instrumentation with TRUShape 3D Conforming files, TruNatomy files, and the WaveOne Gold reciprocating system.

Materials and methods

Fifty-one mesiobuccal canals with severe curvatures (25–40°) were assigned to three equal groups according to the rotary system used for preparation, either TRUShape, TruNatomy, or WaveOne Gold files. The extruded debris was collected in pre-weighed glass vials. The data were statistically analyzed using a one-way ANOVA test and Tukey’s post hoc test.

Results

The least extruded debris was obtained with the WaveOne Gold instruments compared to the TRUShape and TruNatomy files (p < 0.001).

Conclusions

Debris extrusion occurs independently of the motion or design of the instrument. The WaveOne Gold system outperformed TRUShape and TruNatomy files in this study.

Full counterclockwise rotary motion kinematics enhances the removal of gutta-percha and bioceramic sealer from root canals: A computed tomographic study

Background and Aim

Complete removal of gutta-percha and sealer is an important step during retreatment. The aim of this study was to assess the efficacy and time taken by full counterclockwise rotary motion of a reciprocating file in the removal of gutta-percha and BioRoot™ RCS bioceramic sealer.

Materials and Methods

Thirty-six extracted human mandibular premolars were instrumented with Mtwo rotary files and obturated using lateral condensation technique with gutta-percha and BioRoot™ RCS bioceramic sealer. The teeth were divided into three retreatment groups (n = 12) based on the kinematics used: Group I, Mtwo retreatment (Mtwo-R) files; Group II, Reciproc files used in reciprocation mode (Reciproc-R); and Group III, Reciproc files used in full counterclockwise motion (Reciproc-CCW). The efficacy of gutta-percha and bioceramic sealer removal was assessed by volume of gutta-percha removed using cone-beam computed tomography and area of remaining gutta-percha and bioceramic sealer using ImageJ software after longitudinal sectioning. Statistical analysis was done by one-way analysis of variance test and Tukey's multiple post hoc tests.

Results

Reciproc-CCW motion was significantly efficient in the removal of gutta-percha and bioceramic sealer in comparison to Mtwo-R files and Reciproc-R. The time taken for gutta-percha and sealer removal was least for Reciproc-R (325.5 ± 101.68 seconds) and was statistically significant in comparison to the other groups.

Conclusion

Within the limitations of the study, Reciproc-CCW was an effective method of removal of gutta-percha and bioceramic sealer during retreatment.

Influence of Apical Diameter on Filling Material Extrusion during Retreatment - A Micro-CT and CBCT evaluation

AIM

To investigate whether foraminal widening performed at primary treatment has an effect on the amount of apically extruded obturator material during retreatment and to evaluate the sensitivity of cone beam computed tomography (CBCT) in detecting extruded obturator material.

METHODS

Forty palatal roots of maxillary molars were selected based on micro-CT and divided into two groups (n=20): with foraminal widening (WE) and without foraminal widening (NE). To standardize the apical foramen, all specimens were instrumented to the foramen using the Protaper Next system, up to instrument X3. The WE group was instrumented to the foramen up to instrument X5, and the NE group was instrumented 1 mm lower. The canals were obturated 1 mm below the apical foramen with gutta-percha and AH Plus and stored for 7 days at 37 °C and 95% humidity. Roots were fixed in microtubes filled with 1.5% agar gel. The obturation material was removed with Reciproc R50. Scans of the teeth and agar were performed using micro-CT and CBCT. Comparison between groups and between methods was performed using Mann-Withney test (p ≤0.05).

RESULTS

No statistical difference was found when comparing the extruded material between groups using micro-CT (p = 0.589) or CBCT (p = 0.953). CBCT measured a greater volume of extruded material than micro- CT (p = 0.0004).

CONCLUSION

Foraminal widening had no effect on the extrusion of filling material during retreatment. The CBCT favored the evaluation of apically extruded filling material.

Postoperative Pain Following Root Canal Instrumentation Using ProTaper Next or Reciproc in Asymptomatic Molars: A Randomized Controlled Single-Blind Clinical Trial

Aim: The development of postoperative pain following root canal instrumentation may impair patient’s comfort and undermine their trust in the dentist. This study assessed the effect of root canal instrumentation techniques (rotary (PTN; ProTaper Next®) and reciprocating (R; Reciproc®)) on the postoperative pain intensity (primary outcome) and tenderness on biting (secondary outcome) of patients’ asymptomatic molars. Methodology: This study protocol was registered with ReBec-WHO (U1111-1182-2800). From a pool of 112 patients evaluated for eligibility (healthy adults (≤18 years old)), with a single asymptomatic molar (maxillary or mandibular) indicated for root canal treatment, diagnosed with asymptomatic irreversible pulpitis (including chronic hyperplastic pulpitis), 75 were randomly allocated in similar proportions to receive the intervention (two-appointment root canal therapy) in either the PTN or R group. The allocated procedures were performed using standardized protocols. Participants (blinded to the instrumentation technique) rated their pain intensity at 6, 12 and 24 h and from day 2 to day 7 following the root canal instrumentation appointment using a VAS and an NRS; the ibuprofen tablets taken and the presence of tenderness on biting were recorded. The instrumentation time was registered. Univariate and multivariate statistics measured the effect of independent variables on the outcomes. Results: From the 75 patients allocated, 8 patients (4 from each group) were lost; in total, 33 patients were analyzed in the PTN group and 34 in the R group. The frequencies of postoperative pain (p > 0.05) and tenderness on biting (p > 0.05) were similar between groups. The medication intake (mean of 1.31 tablets) and the time of instrumentation (approximately 11 min) were similar between groups. Conclusion: ProTaper Next and Reciproc® caused a slight risk of tenderness on biting and contributed to similar self-reported postoperative pain (low intensity) up to 7 days following root canal shaping.

COMPARATIVE EVALUATION OF THE EFFECT OF DIFFERENT ROTARY INSTRUMENT SYSTEMS ON THE AMOUNT OF APICALLY EXTRUDED DEBRIS

Objectives: The purpose of our study is to examine in vitro the amount of debris extrusion from the apical after root canal preparation with different rotary instruments. Materials and Methods: In present study, 60 single root single-canal lower premolar human teeth were used. The teeth were randomly selected and divided into 4 main groups (n=15). Root canals are shaped by using 2Shape, One Curve and XP-3DEndo Shaper working in rotational motion and WaveOne Gold working reciprocal motion. Later, the weight of each eppendorf tube was weighed on a precision scale and the amount of debris extrusion from the apical was determined with 10ˉ4 precision by subtracting the empty weight of the tube. Since the parametric test assumptions were fulfilled in the evaluation of the data obtained regarding the amount of debris extrusion from the apical of file systems by loading them into the SPSS 22.0 program, One-Way Variance analysis was used and the level of error was taken as 0.05. Results: When the amount of debris extrusion from the apical is ordered from high to low, it was seen that there are 2Shape, One Curve, XP-Endo Shaper, WaveOne Gold. However, the difference between study groups was not statistically significant (p> 0.05). Conclusions: Considering the results obtained in terms of debris extrusion from the apical about the new generation files with different metallurgy, kinematics, structural features, designs and different configurations that we used ın present study, it was seen that these systems would not show any difference in terms of the effect of debris on the success of endodontic treatment.

Quantitative Evaluation of Apically Extruded Debris of Root Canal Dentin Layer with WaveOne, ProTaper Next, ProTaper Gold Rotary File Systems

Endodontic flare-up or post-operative pain occurs when debris such as necrotic pulp tissue, dentin chips, irrigants, and microorganisms are extruded from the apical foramen intraoperatively into the periradicular tissue during root canal instrumentation. This study compared the amount of apical debris extrusion of the root canal dentin layer after using reciprocating and rotary file systems (WaveOne, ProTaper Next and ProTaper Gold). Sixty extracted human maxillary central incisors with one canal and closed apex were included in the study. Samples were randomly and equally divided into three groups (n = 20) according to the file systems used for preparation of the root canal. Teeth in the WO group were instrumented by WaveOne, while the PTN group were instrumented by ProTaper Next, and teeth samples in the PTG group were cleaned and shaped by ProTaper Gold. The mean apically extruded debris weight in grams was estimated using the modified Myers and Montgomery experimental model. Analysis of variance (ANOVA) test was used for the comparison of debris weight in three groups. Post hoc LSD test was applied for pairwise comparison of debris weight. The α value of significance was 0.05. The WO group had significantly lower mean debris weight than the PTN and PTG groups (p = 0.001). Post hoc pairwise comparison revealed that there was a statistically significant difference in mean debris weight between the WO group and PTN group (0.0215 vs. 0.0341, p = 0.001); and the WO group and PTG group (0.0215 vs. 0.0324, p = 0.003). Root canal preparations with different file systems were associated with apical extrusion of the debris from the root canal dentin layer. However, the WaveOne system resulted in a comparatively lower amount of apical debris layer extrusion than the ProTaper Next and ProTaper Gold rotary file systems.

Apically Extruded Debris during Instrumentation using Different Engine Driven File Systems: A Comparative In Vitro Study

AIM: The aim of the present study was to evaluate and compare the amount of apically extruded debris using three engine driven systems. METHODS: Sixty mandibular premolars with single root were used. The samples were divided into three groups with 20 teeth for each group: group 1 Neolix Neoniti A1 (25, 0.08), group 2 WaveOne GOLD Primary (25.07, red), and group 3 Protaper Next (PTN), using X1 (017/0.04), X2 (025/0.06) files. All files were used to prepare the root canals according to manufacturer instruction. Root canal preparation for each group was done according to manufacturer instructions using 16:1 gear reduction hand piece powered by a torque controlled electric motor. Debris collection was made using apparatus described by Myers and Montgomery. The extruded debris weight was measured by subtracting the weight of the empty Eppendorf tubes from the weight of the debris containing tubes results were statistically analyzed. RESULTS: One-way analysis of variance test revealed that there was statistically significant differences between all the three groups being tested (p < 0.001) showed that apical extrusion of the debris of WaveOne Gold was the least followed by Neolix Neoniti and finally PTN which showed the most apical extrusion of debris with a significant difference between all groups. CONCLUSIONS: WaveOne Gold was found to be the least apical extruded debris system among all groups.

Critical analysis of research methods and experimental models to study removal of root filling materials

Despite enjoying high favourable outcome rates, root canal treatment is not always successful. Root canal retreatment is a widely practised option for managing a non-healing root treated tooth. A basic distinction between retreatment and initial treatment is the requirement to remove the existing root filling material occupying the root canal space. Only then, can the technical deficiencies and possible causes of failure be addressed. Hence, the successful removal of the root filling material is critical to achieving the objectives of retreatment. Many different materials and techniques have been used for root canal filling, which have been documented in a plethora of studies; these are mainly laboratory studies investigating the removal of root filling materials. To help guide future research, which may then better inform clinical practice in relation to retreatment procedures, the focus of this narrative review is on the research methods and experimental models employed to study the removal of root filling materials. The current available literature demonstrates great variation in the research methodologies used to study the removal of root filling material, including direct visualization by splitting tooth samples or clearing, three-dimensional radiographic imaging including using microcomputed tomography or cone-beam computed tomography, and a combination of these techniques. Depending on the research method employed, variation also exists in quantification of root filling material removal; these include measurements of surface area, volume or weight, and criteria-based (semi-quantitative) assessment. Experimental models, using human teeth or resin models, differ with respect to standardization techniques and replication of the clinical scenario including initial sample preparation, canal filling, allocation and technical aspects of retreatment procedures. Future models should replicate, as closely as possible, the clinical scenario. Currently, microcomputed tomography provides a highly detailed, non-invasive and non-destructive method of objectively assessing and quantifying root filling removal.

The effect of two rotary and two reciprocating NiTi systems on postoperative pain after root canal retreatment on single-rooted incisor teeth: A randomized controlled trial

AIM

This randomized clinical trial aimed to assess the effect of two rotary (ProTaper Retreatment + ProTaper Gold and Hyflex EDM) and two reciprocating (Reciproc Blue and WaveOne Gold) NiTi systems on postoperative pain after root canal retreatment on single-rooted incisor teeth.

METHODOLOGY

One hundred and eighty patients scheduled for root canal retreatment were randomly assigned to one of the four groups according to the NiTi system (ProTaper Retreatment + ProTaper Gold, Hyflex EDM, Reciproc Blue or WaveOne Gold) used for the removal of root canal fillings and further canal preparation. The working length was determined to be 1 mm shorter than the '0.0' mark of the apex locator. Root canals were filled with gutta-percha and an epoxy resin-based root canal sealer using a lateral compaction technique. The teeth were restored using a resin composite material. A single operator performed the retreatments in a single visit. The incidence and intensity of postoperative pain were rated on a numeric rating scale by patients 24, 48 and 72 h after retreatment. The number of analgesic tablets (400 mg Ibuprofen) taken by patients was also recorded. Data were analysed using the Mann-Whitney U, Wilcoxon and chi-square tests.

RESULTS

For the intensity of postoperative pain, the difference between the four groups was not significantly different (p > .05). No significant difference was found between the groups in terms of analgesic medication intake (p > .05).

CONCLUSIONS

The rotary and reciprocating NiTi systems tested in this study were associated with similar intensity of postoperative pain and intake of analgesics following root canal retreatment on single-rooted incisor teeth completed in one visit.

Apical debris extrusion of full-sequenced rotary systems in narrow ribbon-shaped canals

The apically extruded debris caused by TruNatomy System (TRN), RACE EVO system (RE) and VDW Rotate (VR) systems in mandibular anterior teeth with ribbon-shaped root canals were compared. The root canals (n = 20 in each group) were irrigated with NaOCl 2.5%, and the extruded debris was collected at pre-weighted Eppendorf tubes. The amount of apically extruded debris (mg) and the treatment time (s) were recorded. Tukey pairwise comparisons were performed to compare groups with a 95% confidence level. VR had significantly less debris extrusion values and treatment time than RE and TRN (P < 0.05). Although no difference was observed between RE and TRN in terms of apically extruded debris (P > 0.05), a significant difference in favour of RE was observed in terms of treatment time (P < 0.05). All the instruments extruded debris at varying weights.

Effect of ultrasonic cleaning on the bond strength of fiber posts in oval canals filled with a premixed bioceramic root canal sealer

Objective

This study aimed to evaluate the effect of ultrasonic cleaning of the intracanal post space on the bond strength of fiber posts in oval canals filled with a premixed bioceramic (Bio-C Sealer [BIOC]) root canal sealer.

Materials and Methods

Fifty premolars were endodontically prepared and divided into 5 groups (n = 10), based on the type of root canal filling material used and the post space cleaning protocol. A1: gutta-percha + AH Plus (AHP) and post space preparation with ultrasonic cleaning, A2: gutta-percha + BIOC and post space preparation with ultrasonic cleaning, B1: gutta-percha + AHP and post space preparation, B2: gutta-percha + BIOC and post space preparation, C: control group. Fiber posts were cemented with a self-adhesive luting material, and 1 mm thick slices were sectioned from the middle and cervical third to evaluate the remaining filling material microscopically. The samples were subjected to a push-out test to analyze the bond strength of the fiber post, and the results were analyzed with the Shapiro-Wilk, Bonferroni, Kruskal-Wallis, and Mann-Whitney tests (p < 0.05). Failure modes were evaluated using optical microscopy.

Results

The results showed that the fiber posts cemented in canals sealed with BIOC had lower bond strength than those sealed with AHP. The ultrasonic cleaning of the post space improved the bond strength of fiber posts in canals sealed with AHP, but not with BIOC.

Conclusions

BIOC decreased the bond strength of fiber posts in oval canals, regardless of ultrasonic cleaning.

Evaluation of apical extrusion during conventional retreatment with three endodontic systems

Background/Aim: The aim of this study was to compare the apical extrusion during endodontic retreatment using three different endodontic systems. Material and Methods: 120 extracted human teeth were ex vivo endodontically treated and retreatment was performed using three different endodontic systems. Samples were divided into 3 groups, A-retreatment with Hedstroem hand files, B-retreatment with Pro Taper Retreatment files and C-retreatment with Pro Taper Gold files. Apically extruded material was collected in pre-measured Eppendorfs on a laboratory scale (10-5g). The amount of the extruded material was measured after the retreatment. The data were analysed using the the statistical software: STATISTICA 7.1 and SPSS for Windows 20. Results: The statistical analysis of the data revealed significant differences between the three endodontic retreatment systems (P< 0.05). Apical extrusion in the A endodontic system is significantly greater than the rotary (B and C) endodontic systems. Conclusions: In ex vivo conditions the results of this study showed significant statistical difference between three investigated endodontic retreatment systems concerning the amount of apically exuded material. The largest amount of material suppressed periapically was proven for Hedstroem hand instruments.

Freitas KM. In vitro Comparison of Apically Extruded Debris during Root Canal Retreatment with Rotary and Reciprocating Systems

Introduction:

The extrusion of apical detritus during the retracting procedure is very important, as, besides eliminating materials of radicular obturation, aggressive agents and products such as the remains of dentin taken out, and microorganisms are generally located in tissue around the roots, producing undesired effects, such as inflammation, acute pain, post-operatory pain and delays in the periapical treatment.

Objective:

To determine the amount of apically extruded detritus using rotary and reciprocating retreatment systems.

Methodology:

An experimental comparative study as conducted in which 40 single-rooted human first premolars were analyzed. The instruments used were ProTaper Universal files up to F3 and sodium hypochlorite, and the sealing was made through the hybrid technique Tager. They were then kept at 37ºC and 100% of humidity for 15 days so that the sealing material would seal. For the retracting procedure, experimental tubes previously weighted were used. The sample was divided randomly into two groups of 20 pieces. Group A: ProTaper R, and group B: Reciproc. Then, the irrigating material (distilled water) was evaporated from the tubes for 12 hours in a stove at 105ºC, and the experimental tubes were weighted in an analytical precision weighing scale 10-5g. The data was analyzed through the T Student with a significance level of 5%.

Results:

Results indicated that groups A and B, retreatment with rotational ProTaper R and reciprocating retreatment system (Reciproc) showed a similar difference of initial and final weights, indicating similar apical extrusion of detritus.

Conclusion:

Both systems extruded a similar amount of detritus during the retreatment procedures.

Evaluation of apically extruded debris during the removal of canal filling material using three different Ni-Ti systems and hand files in teeth with simulated apical root resorption

AIM

To compare the weight of apically extruded debris produced during the removal of root canal filling material using various files in extracted teeth with simulated apical root resorption.

METHODOLOGY

The root canals of one hundred and twenty extracted mandibular premolar teeth were prepared with Revo-S files and filled using a cold lateral compaction technique with gutta-percha and a resin-based sealer (AdSeal; Meta-Biomed, Cheongwon, Korea). Sixty teeth were randomly assigned to four control groups (hand file, ProTaper Universal retreatment file, D-RaCe retreatment file, and Reciproc file) for the removal of root canal filling material. The apical portion of the remaining 60 teeth was modified to simulate apical root resoption, and the teeth were then randomly divided into 4 experimental groups (using the same techniques as in the control groups) for the removal of root canal filling material. Apically extruded debris was collected into pre-weighed Eppendorf tubes and then dried. The mean weight of the apically extruded debris was assessed with an analytical balance to an accuracy of 10^-4  g. Data were analysed using two-way analysis of variance and a Tukey's post hoc test.

RESULTS

In the simulated apical root resorption groups, all file systems were associated with significantly more debris extrusion compared to the groups without simulated resorption (P < 0.05). The amount of apically extruded debris was greatest in the hand file groups compared with the other groups (P < 0.05). In the groups with simulated apical root resorption, the Reciproc system was associated with the least weight of apically extruded debris (P < 0.05), whereas there was no significant difference between the ProTaper Universal retreatment and D-RaCe files (P > 0.05). In the groups without simulated apical root resorption, there was no significant difference between Reciproc, ProTaper Universal retreatment and D-RaCe retreatment files (P> 0.05). The time required to remove the root canal filling material was as follows: hand file > ProTaper Universal retreatment = D-RaCe retreatment > Reciproc (P < 0.05).

CONCLUSIONS

The weight of apically extruded debris was significantly greater in teeth with simulated apical root resorption than in those teeth without simulated apical root resorption. Hand files were associated with significantly more apically extruded debris in all groups during removal of root canal filling material.

Apically extruded debris and irrigants during root canal filling material removal using Reciproc Blue, WaveOne Gold, R-Endo and ProTaper Next systems

Background. The present study aimed to compare the amount of apically extruded debris and irrigants produced by various nickel-titanium instruments.

Methods. A total of 100 single-rooted mandibular premolar teeth were root canal treated and prepared for agar gel model. The root canal fillings were removed using Reciproc Blue, ProTaper Next, R-Endo, WaveOne Gold systems or hand instrumentation. The mean weights of apically extruded materials were calculated. Data were statistically analyzed using one-way ANOVA and post hoc Bonferroni tests.

Results. Hand instrumentation resulted in significantly more debris and irrigants than other systems (P<0.05). The mean amount of apically extruded debris and irrigants produced by Reciproc Blue system was significantly greater than motordriven instruments (P<0.05). No significant difference was detected between ProTaper Next and WaveOne Gold systems (P>0.05), while they both produced significantly less apically extruded material than R-Endo system (P<0.05).

Conclusion. All the instruments caused apical extrusion. ProTaper Next and WaveOne Gold systems were associated with significantly less apical extrusion.

Performance of Reciproc Blue R25 Instruments in Shaping the Canal Space without Glide Path

INTRODUCTION

This study assessed the frequency in which Reciproc Blue R25 instruments (VDW, Munich, Germany) reached the full working length (WL) of mandibular molar canals without a glide path. The influence of the type of electric motor (ie, conventional corded or cordless) on the instrument's performance was also assessed.

METHODS

One hundred mandibular molars with slight to moderate root canals were selected and randomly assigned into 1 of 2 experimental groups according to the type of electric motor used: conventional corded (VDW Silver, VDW) or cordless motors (VDW.CONNECT Drive, VDW). Therefore, 50 molars and 154 root canals were selected for each motor. Reciproc Blue R25 instruments were used until reaching two thirds of the estimated WL. Then, a size 10 K-file was passively inserted to determine the full WL. No active instrumentation movement was performed with a size 10 K-file. Independently, whether a size 10 K-file reached the apex or not, Reciproc Blue R25 instruments were used to complete canal preparation. When the Reciproc Blue R25 instrument was able to reach the full WL, the case was classified as "reaching the full working length" (RFWL). If the instrument was not able to reach the full WL, the case was classified as "not reaching the full working length" (NRFWL). The chi-square test of goodness of fit was used to verify whether the observed frequencies of RFWL and NRFWL adhered to the expected ones. A 5% cutoff level of significance was considered for statistical assumptions.

RESULTS

Reciproc Blue R25 instruments were able to reach the full WL in 304 root canals (98.70%). The chi-square test revealed the observed frequencies of RFWL and NRFWL to be significantly different from the expected frequencies (χ² = 292,208, P = .000). The frequency of RFWL and NRFWL was exactly the same for both types of electric motors. No instrument fractured, and a single file deformed. In 50 of 308 root canals, a size 10 K-file was unable to passively reach the full WL. From these 50 canals, Reciproc Blue R25 instruments were able to reach the full WL in 47 of them.

CONCLUSIONS

Reciproc Blue R25 instruments were able to reach the full WL in a high frequency of cases. The type of electric motor used did not interfere in the frequency of RFWL cases. No instrument fractured, and a single file deformed.

Efficacy of novel thermomechanically treated reciprocating systems for gutta-percha removal from root canals obturated with warm vertical compaction

Background. The present study aimed to test the efficacy of novel reciprocating systems in terms of gutta-percha removal of roots obturated with warm vertical compaction technique. Methods. Ninety straight rooted maxillary incisors were enlarged with hand files up to a # 50/02 apical size and obturated using warm vertical compaction technique. The specimens were divided into four groups according to system used for filling removal, as Reciproc Blue, Reciproc, WaveOne Gold and hand-instrumentation. The residual filling materials and time required for root canal removal were calculated. Statistical analyses were performed using one-way analysis of variance and Tukey tests with 5% significance threshold. Results. There were no significant differences among Reciproc, Reciproc Blue and WaveOne Gold (P > 0.05). Hand-instrumentation group left significantly greater root canal filling material (P < 0.05). The time required for root canal filling removal was significantly shorter in the Reciproc group followed by WaveOne Gold, Reciproc Blue and hand-instrumentation groups (P< 0.05). Conclusion. Efficacy of Reciproc Blue, WaveOne Gold and Reciproc instruments for root canal filling removal were similar and superior to hand-instrumentation.

Bacterial Reduction after Gutta-Percha Removal with Single vs. Multiple Instrument Systems

Introduction:

The aim of this study was to evaluate the effectiveness of a reciprocating single-instrument system (Reciproc-REC) compared with combined continuously rotating multiple-instrument systems [D-Race (DR) and BioRace (BR)] in reducing Enterococcus faecalis (E.f.) after gutta-percha removal.

Methods and Materials:

Forty-six extracted human maxillary incisors were prepared and contaminated with E.f. strain (ATCC 29212) for 30 days. The samples were obturated and randomly divided into two experimental groups for gutta-percha removal (n=23): a REC group (R50) and a DR/BR group (DR1, DR2 and BR6). A standardized irrigation with 0.9% saline solution was performed. Root canal samples were taken with paper points before (S1) and after (S2) the removal of gutta-percha to establish bacterial quantification by culture. The time required for gutta-percha removal was also recorded. Positive and negative control groups (n=6) were used to test bacterial viability and control asepsis, respectively. Data were analysed using t-Student and one-way ANOVA tests (5% margin of error).

Results:

The mean percentage of bacterial reduction was significantly higher in DR/BR group (84.2%) than in REC group (72.3%) (P<0.05). The mean time for obturation removal was 74.00 sec in REC group and 107.53 sec in DR/BR group (P<0.05).

Conclusion:

The combined continuously rotating multiple-instrument system was more effective in reducing bacteria after the removal of gutta-percha than the single-instrument system. None of the tested systems was able to completely eliminate root canal infection after gutta-percha removal. Thus, additional techniques should be considered.

Apically extruded debris during the removal of canal filling material from root canals using three techniques

AIM

In the present study, we evaluated the effect of the single-cone technique (SCT), cold lateral compaction (CLC), and wave vertical compaction (WVC) technique performed using two different sealers on the amount of apically extruded debris (AED) produced during the removal of canal filling material.

METHODS

Ninety extracted mandibular premolars were prepared with ProTaper instruments. The teeth were then randomly assigned to six groups (N = 15) for root canal filling: (a) group 1, CLC+AH Plus; (b) group 2, SCT+AH Plus; (c) group 3, WVC+AH Plus; (d) group 4, CLC+MTA Fillapex; (e) group 5, SCT+MTA Fillapex; and (f) group 6, WVC+MTA Fillapex. In all groups, the removal of canal filling material was performed with ProTaper retreatment instruments. The mean weight of the AED was assessed with an analytical balance.

RESULTS

The amount of AED was lowest in groups 2 and 5 (P < .05), with no difference between these groups (P > .05). Groups 3 and 6 produced the greatest amount of extruded debris (P < .05); there was no difference between these groups (P > .05). Additionally, there was no difference between groups 1 and 4 (P > .05). There was no significant difference among the groups regarding sealer type (P > .05).

CONCLUSIONS

The canal filling technique used affected the amount of AED produced during the removal of canal filling material, but not sealer type.

Micro-computed tomographic evaluation of canal retreatments performed by undergraduate students using different techniques

Objectives

This study evaluated the amount of remaining root canal filling materials after retreatment procedures performed by undergraduate students using manual, rotary, and reciprocating techniques through micro-computed tomographic analysis. The incidence of instrument fracture and the instrumentation time were also evaluated.

Materials and Methods

Thirty maxillary single rooted teeth were prepared with Reciproc R25 files and filled with gutta-percha and AH Plus sealer by the continuous wave of condensation technique. Then, the specimens were assigned to 3 groups (n = 10), according to the retreatment technique used: manual, rotary, and reciprocating groups, which used K-file, Mtwo retreatment file, and Reciproc file, respectively. Retreatments were performed by undergraduate students. The sample was scanned after root canal filling and retreatment procedures, and the images of the canals were examined to quantify the amount of remaining filling material. The incidence of instrument fracture and the instrumentation time were recorded.

Results

Remaining filling material was observed in all specimens regardless of the technique used. The mean volume of remaining material was significantly lower in the Reciproc group than in the manual K-file and Mtwo retreatment groups (p < 0.05). The time required to achieve a satisfactory removal of canal filling material and refinement was significantly lower in the Mtwo retreatment and Reciproc groups (p < 0.05) when compared to the manual K-file group. No instrument fracture was observed in any of the groups.

Conclusions

Reciproc was the most effective instrument in the removal of canal fillings after retreatments performed by undergraduate students.

Apically extruded debris in filling removal of curved canals using 3 NiTi systems and hand files

Abstract The aim of this study was to assess the amount of apically extruded debris during filling removal with WaveOne Gold (WOG), ProTaper Universal Retreatment (PTR), D-RaCe Retreatment (DRR) or hand files (HF), to compare the working time during filling removal, and to describe failures of NiTi instruments. Forty mesiobuccal roots of maxillary first molars were prepared with WOG Primary, obturated and divided into 4 groups (n=10), according to the instruments used: WOG, PTR, DRR or HF. Distilled water was used as irrigant and the extruded debris were collected in Eppendorf tubes and dried. The amount of extruded debris was determined by subtracting the final from the initial weight. The time of filling removal for each canal was recorded and the instruments used were analyzed pre and post-operatively by SEM. Kruskal-Wallis and Dunn’s test analyzed extruded debris data and ANOVA, followed by Tukey’s test, compared the working time data (a=0.05). Instrument deformation and fracture were described. WOG produced significantly less debris compared with HF and DRR (p<0.05), and similar to PTR (p>0.05). HF, PTR and DRR showed no significant difference (p>0.05). Working time in HF group was significantly higher than others (p<0.05). SEM analyses showed, from the 18 instruments evaluated, 3 fractures and 10 deformations. All instruments tested caused debris extrusion. WOG was associated with less extrusion than DRR and HF. Filling removal with HF was slower than with the other instruments. All NiTi systems presented fracture and deformation.

The influence of ProTaper and WaveOne on apically extruded debris: A systematic review and meta-analysis

Background:

Apically extruded debris produced during root canal preparation can induce postoperative inflammation and subsequent failure of root canal treatment. Therefore, debris production must be reduced to improve the outcome of root canal treatment.

Aim:

This study aimed to provide a theoretical basis for the improvement of root canal treatment by comparing the difference in the amount of apically extruded debris produced during the root canal preparation of extracted human teeth with ProTaper Universal (PTU), ProTaper Next (PTN), and WaveOne (WO).

Materials and Methods:

On March 30, 2017, three researchers searched five electronic databases (PubMed/Medline, Cochrane, Science Direct Online, Embase, and Web of Science) with no time limitations. Only articles written in English were retrieved, and 150 articles were obtained. Then, the three researchers independently selected articles in accordance with previously established inclusion and exclusion criteria, and inconsistent results were discussed. Data were analyzed through meta-analysis for standardized mean difference (SMD).

Results:

Eight studies met the inclusion criteria and were subjected to qualitative analysis. Four articles showed that PTU produced higher amounts of apical debris than WO; two articles showed that PTU produced lower amounts of apical debris than WO; and three articles showed that PTN produced lower amounts of apical debris than WO. Moreover, one article demonstrated that PTU produced higher amounts of apical debris than PTN. A meta-analysis showed that PTU and WO did not produce significantly different amounts of apically extruded debris: SMD = −0.26, Z = 0.50 (P > 0.05). PTU produced lower amounts of apically extruded debris than WO: SMD = −4.98, Z = 2.79 (P < 0.05). However, results were significantly heterogeneous among all the included studies (I²= 97%). No significant difference was found between PTU and WO in the amounts of apically extruded debris: SMD = 0.47, Z = 1.06 (P > 0.05).

Conclusion:

Currently available evidence shows that PTN can produce lower amounts of apical debris than WO (P < 0.05). Moreover, the amounts of apically extruded debris produced by PTU and WO are not significantly different (P > 0.05). Nevertheless, given the limited number of studies reviewed, a definitive conclusion cannot be reached.

Evaluation of Apically Extruded Debris during Root Canal Retreatment Using ProTaper Next and Reciproc in Severely Curved Canals

INTRODUCTION

To compare the apical extrusion of debris produced during root obturating material removal from severely curved root canals using either Reciproc (REC) or ProTaper Next (PTN) systems.

METHODS AND MATERIALS

Twenty-six mesial canals of lower molars were instrumented, filled and allocated into two groups (n=13). Micro-computed tomographic images were performed to determine the root canal configuration (Vertucci's type IV) and initial volume of obturation. One Eppendorf tube was assigned per canal and weighed (10^-4g) before and after removal of the obturating material. The difference between the initial and final weights was calculated and statistically evaluated.

RESULTS

Apical extrusion of debris was confirmed in all samples, and the mean amount of apical extrusion was similar between both groups (0.061±0.014 g in PTN vs. 0.065±0.016 g in REC samples) (P<0.05).

CONCLUSION

Both systems caused apical extrusion of debris with no differences between PTN and REC systems.

Postoperative pain intensity after using different instrumentation techniques: a randomized clinical study

Postoperative pain is a frequent complication associated with root canal treatment, especially during apical instrumentation of tooth with preexisting periradicular inflammation

In vitro Comparison of Apical Debris Extrusion Using Rotary and Reciprocating Systems in Severely Curved Root Canals

Introduction:

The aim of this in vitro study was to compare the amount of apically extruded debris after root canal preparation using rotary and reciprocating systems in severely curved root canals.

Methods and Materials:

Thirty six extracted human mandibular first molars with 25-35^° curvature in their mesiobuccal (MB) canal (according to Schneider’s method) were cleaned and shaped with ProTaper and WaveOne systems. The extruded debris was collected and their net weight was calculated. To compare the efficiency of the two systems, the operation time was also measured. The data were analyzed with t-test.

Results:

The amount of extruded debris in WaveOne group was significantly greater in comparison with ProTaper group (26%). The operating time for ProTaper was however, significantly longer than WaveOne.

Conclusion:

Both root preparation systems caused some degree of debris extrusion through the apical foramen. However, this amount was greater in WaveOne instruments.