Kinematic Effects of Nickel-Titanium Instruments with Reciprocating or Continuous Rotation Motion: A Systematic Review of In Vitro Studies

Shaping Efficiency of Rotary and Reciprocating Kinematics of Engine-driven Nickel-Titanium Instruments in Moderate and Severely curved Root Canals Using Microcomputed Tomography: A Systematic Review of Ex Vivo Studies

INTRODUCTION

This systematic review aimed to compare reciprocating with continuous rotary instrumentation kinematics, by means of microcomputed tomography evaluations, in extracted human permanent teeth with moderate and severe canal curvatures.

METHODS

The research protocol was registered in the International Prospective Register of Systematic Reviews and given the reference number CRD42023404035. An electronic search was undertaken in MEDLINE (PubMed), EBSCO, Scopus, Web of Science databases until December 2021. Manual screening of issues in endodontic journals and references of relevant articles were assessed individually. The risk of bias (RoB) of the included articles was evaluated with the QUIN tool (Quality Assessment Tool for In Vitro Studies).

RESULTS

Among 1640 retrieved articles, 49 were included in the qualitative synthesis. Fifteen articles had low RoB, 33 articles had medium RoB, and only 1 study was at high RoB. Continuous rotary systems had better centering ability in both moderate and severe canal curvatures and resulted in less apical transportation in severely curved root canals. None of the kinematic systems was capable of instrumenting the entire canal surface area. Reciprocating kinematics systems tended to provide higher increase in surface area of severely curved canals and produced fewer dentinal microcracks in moderately curved canals.

CONCLUSIONS

The evidence presented in this review suggests that continuous rotary system seems to be better than reciprocating system in solving the major issues encountered during root canal instrumentation of extracted teeth with moderate and severe curvatures.

Fifteen years of engine-driven nickel-titanium reciprocating instruments, what do we know so far? An umbrella review

Numerous systematic reviews (SRs) have produced conflicting findings on engine-driven nickel-titanium reciprocating instruments (reciprocating instruments) since Yared's seminal study 15 years ago. This umbrella review analysed SRs examining the clinical and laboratory evidence regarding reciprocating instruments for root canal treatment. SRs that evaluated qualitatively and/or quantitatively the outcomes postoperative pain, oral health-related quality of life (OHRQoL), shaping ability, debris extrusion, microbial load, endotoxins reduction, cyclic fatigue, file fracture, dentinal cracks and root canal filling removal were included. The AMSTAR 2 tool was used to evaluate SRs quality, while the ROBIS tool to assess risk of bias (RoB). Forty SRs were included. The SRs revealed predominantly 'high' RoB and 'critically low' quality. Most focused on technical outcomes, exhibiting significant methodological and statistical heterogeneity. Findings suggest comparable efficacy between reciprocating and rotary instruments. However, due to the scarcity of high-quality evidence, future well-designed studies and reviews considering core outcome measures are needed.

Impact of Different Glidepath Techniques on the Overall Performance of WaveOne Gold in an Artificial S-Shape Canal

OBJECTIVES

The article's aim is to test if rotary or reciprocating glide path influences the overall performance of WaveOne Gold in S-shaped canals.

METHODS

Sixty endo training blocks with an S-shape curvature were divided into three groups based on the glide path method used: no glide path; glide path preparation with ProGlider; glide path preparation with WaveOne Gold Glider. All blocks were then shaped with WaveOne Gold Primary. The time for shaping, the incidence in reaching working length and the number of pecking motions were recorded. ANOVA with Turkey's test was used, and the p-value was set to 0.05.

RESULTS

WaveOne Gold Primary reached working length faster in the control group when comparing total working times. No significant differences in the ability of the WaveOne Gold Primary to reach working length in all groups (p > 0.05). The mean number of pecking motions was higher in the control group compared to other groups.

CONCLUSIONS

No significant differences in the time needed to achieve a glide path between Proglider and WaveOne Gold Glider. WaveOne Gold Primary can shape a double curved canal faster if a glide path is present but takes less time to reach length if it is the only file used. No difference in the ability to reach working length.

Cyclic Fatigue of Different Ni-Ti Endodontic Rotary File Alloys: A Comprehensive Review

INTRODUCTION

Modern endodontics aims to decrease the bacterial load from the complex endodontic space. Over the years, improvements in the operative phases have led to a considerable increase in the success rate of endodontic treatments. The shaping phase has seen the development of new techniques supported by technological innovations that have led to higher treatment predictability. Endodontic instruments have experienced a series of changes that have led to modifications in their design, surface treatments, and heat treatments. The clinical use of rotating nickel-titanium instruments has become widespread and consolidated, a success due primarily to the alloy's mechanical characteristics, which are superior to steel ones, but also to innovations in instrument design. The advent of the Ni-Ti alloy has kept the concepts and requirements of shaping the same but has modified its implementation in endodontics.

AIM

The following review followed the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) protocol. The research question focused on Ni-Ti endodontic instruments whose cyclic fatigue was evaluated by analyzing cyclic fatigue strength and the incidence of fracture.

RESULTS

At the end of the research, 10 systematic reviews and 1 randomized controlled trial were included in this comprehensive review. The most frequently analysed alloys were M-wire, conventional Ni-Ti, and CM-wire. In seven articles, instruments made of M-wire alloy were used; in eight articles, instruments made of conventional Ni-Ti; and in seven articles, instruments made of CM-wire alloy.

CONCLUSIONS

The technological evolution of Ni-Ti alloys has led to the development of increasingly high-performance endodontic files that are resistant to cyclic fatigue during clinical practice and have greater resistance to sterilisation practices, making treatment easier and more predictable over time. In particular, heat-treated nickel-titanium root canal instruments present greater resistance to cyclic fatigue than untreated ones and those used with reciprocating kinematics concerning continuous rotation.

Evaluation of the Ability of 3 Reciprocating Instruments to Remove Obturation Material: A Micro-Computed Tomography Study

INTRODUCTION

The purpose of this study was to evaluate the ability of the Reciproc, Reciproc Blue, and WaveOne Gold systems to remove filling material during endodontic retreatment of extracted human mandibular premolars.

METHODS

Thirty-nine teeth were instrumented with the Protaper Universal System to the F3 file and filled with the Tagger hybrid technique using an F3 gutta-percha cone and AH Plus cement. At the end of this period, the teeth were scanned with micro-computed tomography before and after removal of the filling material from the root canals. The teeth were divided into 3 groups (n = 13) based on the apical volume, depending on the systems used to remove the filling material. Group GR: Reciproc 40/.06; Group GRB: Reciproc Blue 40/.06; and Group GWG: WaveOne Gold 35/.06. The results were statistically analyzed using the tests of Kruskal-Wallis, Duncan, and analysis of variance at a significance level of 5%.

RESULTS

The results showed that there were no significant differences between the amounts of filling material removed, either for the apical and middle regions alone or in the overall evaluation for the 3 groups (P = .97). The time evaluation statistically showed that the GR and GWG groups required less time to clean the root canals than the GRB group.

CONCLUSIONS

Reciproc R40 files and WaveOne Gold Medium files required less time for endodontic treatment than Reciproc Blue R40 files. There was no difference in the ability to remove obturation material between the 3 instruments. No instrument was able to completely remove the filling material from the root canals.

Cyclic Fatigue of Different Reciprocating Endodontic Instruments Using Matching Artificial Root Canals at Body Temperature In Vitro

Reciprocating motion expands the lifetime of endodontic instruments during the preparation of severely curved root canals. This study aimed to investigate the time to fracture (TTF) and number of cycles to failure (NCF) of different reciprocating instruments (n = 20 in each group) at body temperature using a dynamic testing model (amplitude = 3 mm). Reciproc Blue (RPB), size 25/.08, WaveOne Gold (WOG) 25/.07, Procodile (Proc) 25/.06, R-Motion (RM_06) 25/.06 and R-Motion (RM_04) 30/.04 instruments were tested in their specific reciprocating motion in artificial matching root canals (size of the instrument ± 0.02 mm; angle of curvature 60°, radius 5.0 mm, and centre of curvature 5.0 mm from apical endpoint). The number of fractured instruments, TTF, NCF, the and lengths of the fractured instruments were recorded and statistically analysed using the Chi-Square or Kruskal-Wallis test. Both TTF (median 720, 643, 562, 406, 254 s) and the NCF (3600, 3215, 2810, 2032, 1482 cycles) decreased in the following order RM_06 > RPB > RM_04 > Proc > WOG with partially significant differences. During testing, only six RM_06 instruments fractured, whereas 16/20 (RPB), 18/20 (Proc), and 20/20 (RM_04, WOG) fractures were recorded (p < 0.05). Within the limitations of the present study, blue-coloured RPB and RM instruments exhibited a significantly superior cyclic fatigue resistance compared to SE-NiTi and Gold-wire instruments. Heat treatment, cross-sectional design and core mass significantly influenced the longevity of reciprocating instruments in cyclic dynamic testing.

Influence of endodontic motors on the behaviour of root canal shaping instruments: an in vitro comparative study

AIMS

The endodontic literature reports a lot of comparative study on endodontic instruments, concerning as well their geometry, instrumental dynamics, material, mechanical behavior or heat treatment. However, to our knowledge, no study has focused on the influence of endodontic motors on the shaping abilities of endodontic instruments. Thus, the aim of this study was to analyze the influence of the endodontic motors on root canal shaping instruments.

METHOD

Dual Move (MICRO-MEGA, Besançon, France), Canal Pro CL2i (COLTENE, Alstätten, Suisse), Canal Pro Jeni Motor (COLTENE, Alstätten, Suisse), Ai Motor (WOODPECKER, Guilin, China), Wave One motor (VDW, Postfach, Munich) and Smart A (WOODPECKER, Guilin, China) were pre-clinically compared in continuous rotation and reciprocating motion on a traction/compression bench using resin blocks. Canal shaping in continuous rotation and reciprocating motion were performed with One Curve and One RECI instruments (MICRO-MEGA, Besançon, France), respectively. The penetration/removal forces, making it possible to objectify the cutting effect and screwing effect of the instruments during root canal shaping, were analyzed.

RESULTS

The results showed (i) that endodontic motors influence the mechanical behavior of endodontic instruments, (ii) that the influence of the motors is essentially felt during reciprocating motion and (iii) that the reciprocating angles influence the mechanical behavior of endodontic instruments.

CONCLUSION

Only endodontic instruments are widely studied in literature while endodontic motors have a direct influence on root canal treatment. This study analyzes the influence of the endodontic motors on root canal shaping instruments. This study tends to demonstrate that Jeni Motor could optimize the mechanical behavior of endodontic instruments.

Undergraduate Endodontic Training and Its Relation to Contemporary Practice: Multicenter Cross-Sectional Study in Saudi Arabia

MATERIALS AND METHODS

An online questionnaire was developed and emailed to all dental schools in Saudi Arabia. This questionnaire was answered by the endodontic undergraduate program director. The data collected were analysed using descriptive statistics.

RESULTS

The response rate was 96.15%, which means twenty-five out of twenty-six dental schools participated in the study. The majority of the academic supervisors was endodontists (92%). The use of magnification and ultrasonic tips was not required by 84% and 76% of the dental schools, respectively. The main endodontic treatment techniques were the step-back technique and gates glidden for cleaning and shaping (76%) and cold lateral compaction for obturation (92%).

CONCLUSIONS

The dental students were supervised by endodontic specialists and trained to use traditional endodontic methods. Encouraging dental educators to train students to use modern technology and equipment would probably improve their graduate clinical skills and performance.

Full counterclockwise rotary motion kinematics enhances the removal of gutta-percha and bioceramic sealer from root canals: A computed tomographic study

Background and Aim

Complete removal of gutta-percha and sealer is an important step during retreatment. The aim of this study was to assess the efficacy and time taken by full counterclockwise rotary motion of a reciprocating file in the removal of gutta-percha and BioRoot™ RCS bioceramic sealer.

Materials and Methods

Thirty-six extracted human mandibular premolars were instrumented with Mtwo rotary files and obturated using lateral condensation technique with gutta-percha and BioRoot™ RCS bioceramic sealer. The teeth were divided into three retreatment groups (n = 12) based on the kinematics used: Group I, Mtwo retreatment (Mtwo-R) files; Group II, Reciproc files used in reciprocation mode (Reciproc-R); and Group III, Reciproc files used in full counterclockwise motion (Reciproc-CCW). The efficacy of gutta-percha and bioceramic sealer removal was assessed by volume of gutta-percha removed using cone-beam computed tomography and area of remaining gutta-percha and bioceramic sealer using ImageJ software after longitudinal sectioning. Statistical analysis was done by one-way analysis of variance test and Tukey's multiple post hoc tests.

Results

Reciproc-CCW motion was significantly efficient in the removal of gutta-percha and bioceramic sealer in comparison to Mtwo-R files and Reciproc-R. The time taken for gutta-percha and sealer removal was least for Reciproc-R (325.5 ± 101.68 seconds) and was statistically significant in comparison to the other groups.

Conclusion

Within the limitations of the study, Reciproc-CCW was an effective method of removal of gutta-percha and bioceramic sealer during retreatment.

The Efficacy of Three Rotary Systems (Reciproc Blue, WaveOne Gold, and AF Blue R3) in Preparing Simulated, Highly Curved Root Canals: An In Vitro Study

Purpose

This study aimed to evaluate the effectiveness of three rotary, single-file, and reciprocating systems in terms of preparation time and canal centralization in simulated highly curved root canal preparation.

Materials and methods

The study sample consisted of 45 simulated canals with a curvature of 40°. They were randomly distributed into three experimental groups: Group 1-Reciproc Blue; Group 2-WaveOne Gold; and Group 3-AF Blue R3. A glide path was established by #10 hand K-file, then red dye was colored on the simulated canals, and photographs of the sample were taken before preparation. Then, the canals of each group were prepared, and other photographs were taken after preparation. The images of the two phases were combined using AutoCAD, where the canal was divided into three parts and the preparation area was measured from the right and left sides of each part of the canal. The preparation time for each system was also measured.

Results

While there were no statistically significant differences in the rate of preserving canal centralization in the middle and apical thirds between preparation groups, a statistically significant difference was found in the coronal third, as the Reciproc Blue and WaveOne Gold systems have a greater ability to maintain the centrality of the canal compared to the AF Blue R3 system. While there were no statistically significant differences between the Reciproc Blue and WaveOne Gold systems in the coronal third, as for the preparation time, it was found that there were statistically significant differences in the preparation time between the groups in favor of the WaveOne Gold system.

Conclusion

Both preparation systems (Reciproc Blue and WaveOne Gold) maintained the anatomical shape and canal centrality, with more cons for WaveOne Gold compared to the Reciproc Blue system. Regarding the volumetric changes, AF Blue R3 had the greatest changes compared to the Reciproc Blue and WaveOne Gold systems. WaveOne Gold Group, in terms of canal preparation time, showed the least time among the investigated groups.

Effect of Rotational Modes on Torque/Force Generation and Canal Centering Ability during Rotary Root Canal Instrumentation with Differently Heat-Treated Nickel-Titanium Instruments

This study aimed to evaluate how various rotational modes influence the torque/force production and shaping ability of ProTaper Universal (PTU; non-heat-treated) and ProTaper Gold (PTG; heat-treated) nickel−titanium instruments. J-shaped resin canals were instrumented with PTU or PTG using an automated instrumentation device operated with reciprocating rotation [150° clockwise and 30° counterclockwise (R150/30) or 240° clockwise and 120° counterclockwise (R240/120)], optimum torque reverse motion (OTR), or continuous rotation (CR) (n = 10 each). Maximum force and torque were recorded, and canal centering ratios were calculated. Statistical analysis was performed with two-way ANOVA and a Bonferroni test (α = 0.05). The results were considered with reference to previous studies on the microstructure of the instruments. The upward force generated by R240/120 and OTR was smaller than that generated by R150/30 and CR in PTG (p < 0.05). The clockwise torque produced by OTR was lower than that produced by R150/30 in PTU and R240/120 and CR in PTG (p < 0.05). R240/120 and OTR induced less canal deviation compared to CR in PTU at 0 mm from the apex (p < 0.05). In conclusion, R240/120 and OTR reduced the screw-in force in PTG and improved the canal centering ability in PTU, which may be associated with the heat treatment-induced microstructural difference of the two instruments.

Postoperative Pain Following Root Canal Instrumentation Using ProTaper Next or Reciproc in Asymptomatic Molars: A Randomized Controlled Single-Blind Clinical Trial

Aim: The development of postoperative pain following root canal instrumentation may impair patient’s comfort and undermine their trust in the dentist. This study assessed the effect of root canal instrumentation techniques (rotary (PTN; ProTaper Next®) and reciprocating (R; Reciproc®)) on the postoperative pain intensity (primary outcome) and tenderness on biting (secondary outcome) of patients’ asymptomatic molars. Methodology: This study protocol was registered with ReBec-WHO (U1111-1182-2800). From a pool of 112 patients evaluated for eligibility (healthy adults (≤18 years old)), with a single asymptomatic molar (maxillary or mandibular) indicated for root canal treatment, diagnosed with asymptomatic irreversible pulpitis (including chronic hyperplastic pulpitis), 75 were randomly allocated in similar proportions to receive the intervention (two-appointment root canal therapy) in either the PTN or R group. The allocated procedures were performed using standardized protocols. Participants (blinded to the instrumentation technique) rated their pain intensity at 6, 12 and 24 h and from day 2 to day 7 following the root canal instrumentation appointment using a VAS and an NRS; the ibuprofen tablets taken and the presence of tenderness on biting were recorded. The instrumentation time was registered. Univariate and multivariate statistics measured the effect of independent variables on the outcomes. Results: From the 75 patients allocated, 8 patients (4 from each group) were lost; in total, 33 patients were analyzed in the PTN group and 34 in the R group. The frequencies of postoperative pain (p > 0.05) and tenderness on biting (p > 0.05) were similar between groups. The medication intake (mean of 1.31 tablets) and the time of instrumentation (approximately 11 min) were similar between groups. Conclusion: ProTaper Next and Reciproc® caused a slight risk of tenderness on biting and contributed to similar self-reported postoperative pain (low intensity) up to 7 days following root canal shaping.

Wear Analysis of Four Different Single-File Reciprocating Instruments before and after Four Uses in Simulated Root Canals

The aim of this study is to assess the surface alterations of four reciprocating instruments before and after the shaping of four resin-simulated root canals. The following four different reciprocating instruments are selected: 10 Reciproc Blue (RB25), 10 WaveOne Gold (WOG), 10 EdgeOne Fire (EOF) and 10 recently introduced instruments OneRECI (OR), for a total of 40 new instruments. Before root canal shaping, each instrument is mounted on a stub in a standardized position and observed using a scanning electron microscope (SEM) to detect any surface alteration, such as microfractures, metal defects, deformations, blunt and disruption of cutting edges, debris, pitting and tip flattening. Micrographs are acquired at the level of the tip, 4 mm, 8 mm and 12 mm from it. After that, each instrument is used in four simulated resin root canals. SEM observation was repeated after the simulated clinical use to assess the wear resistance of the instruments. Surface alterations are registered before and after instrumentation and statistical analysis is performed using a Chi-Square test to verify homogeneity of defects distribution and GLM to evaluate the differences of RMS at baseline and after use for both groups (α level 0.05). Before simulated clinical uses, no alterations are found except for three cases of EOF with metal strips in correspondence to the tip, disruption of the cutting edge of WOG and oily spotting on two different OR. After simulated clinical use, EOF shows a statistically significant difference in terms of spiral distortion and flattening of the cutting edges. The OR shows the highest presence of debris despite the ultrasonic cleaning procedures. No instrument fractures are observed. EOF should be discarded after four clinical uses and carefully inspected after each insertion into root canals. Moreover, tough attention should be paid during disinfection and cleaning procedures after instrumentation considering the copious debris detected in each instrument, particularly in OR.

Endodontic Rotary Files, What Should an Endodontist Know?

Clinicians should be aware of all the characteristics and capacities of the instruments that are possible to use when conducting a root canal treatment. The wide variety of nickel–titanium (Ni-Ti) rotary systems on the market and the lack of standardisation of this type of instrument makes the choice in each specific case difficult. Therefore, this review is intended to summarize the characteristics that should be taken into account when choosing one instrument over another. It will be essential to know characteristics, of alloy from which the instrument is made. Moreover, the geometry of the instrument will determine its behaviour, being the mass, the one that marks its resistance to a greater extent. The movement performed by the file is another of the fundamental keys to understand rotary instruments. In conclusion, when performing root canal treatment, the characteristics of the instrument and the tooth must be taken into account, and the operator’s own limitations should be known. This paper provides the key points to keep in mind when making this type of treatment.

Shaping ability of rotary and reciprocating single-file systems in combination with and without different glide path techniques in simulated curved canals

Background/purpose

Materials and methods

Results

Conclusion

Effectiveness and safety of rotary and reciprocating kinematics for retreatment of curved root canals: a systematic review of in vitro studies

Objectives

This systematic review (register-osf.io/wg7ba) compared the efficacy and safety of rotary and reciprocating kinematics in the removal of filling material from curved root canals.

Materials and Methods

Only in vitro studies evaluating both kinematics during retreatment were included. A systematic search (PubMed/MEDLINE, Scopus, and other databases, until January 2021), data extraction, and risk of bias analysis (Joanna Briggs Institute checklist) were performed. Efficacy in filling removal was the primary outcome.

Results

The search resulted in 2,795 studies, of which 15 were included. Efficacy was measured in terms of the remaining filling material and the time required for this. Nine studies evaluated filling material removal, of which 7 found no significant differences between rotary and reciprocating kinematics. Regarding the time for filling removal, 5 studies showed no difference between both kinematics, 2 studies showed faster results with rotary systems, and other 2 showed the opposite. No significant differences were found in apical transportation, centering ability, instrument failure, dentin removed and extruded debris. A low risk of bias was observed.

Conclusions

This review suggests that the choice of rotary or reciprocating kinematics does not influence the efficacy of filling removal from curved root canals. Further studies are needed to compare the kinematics safety in curved root canals.

Effect of Different Downward Loads on Canal Centering Ability, Vertical Force, and Torque Generation during Nickel-Titanium Rotary Instrumentation

This study aimed to examine how downward loads influence the torque/force and shaping outcome of ProTaper NEXT (PTN) rotary instrumentation. PTN X1, X2, and X3 were used to prepare J-shaped resin canals employing a load-controlled automated instrumentation and torque/force measuring device. Depending on the torque values, the handpiece was programmed to move as follows: up and down; downward at a preset downward load of 1 N, 2 N or 3 N (Group 1N, 2N, and 3N, respectively; each n = 10); or upward. The torque/force values and instrumentation time were recorded, and the canal centering ratio was calculated. The results were analyzed using a two-way or one-way analysis of variance and the Tukey test (α = 0.05). At the apex level, Group 3N exhibited the least canal deviation among the three groups (p < 0.05). The downward force was Group 3N > Group 2N > Group 1N (p < 0.05). The upward force, representing the screw-in force, was Group 3N > Group 1N (p < 0.05). The total instrumentation time was Group 1N > Group 3N (p < 0.05). In conclusion, increasing the downward load during PTN rotary instrumentation improved the canal centering ability, reduced the instrumentation time, and increased the upward force.

Present status and future directions - Removal of fractured instruments

Success rate of fractured instrument retrieval varies because it is dependent mainly on several factors including the visibility of the fractured instrument, the length of the fractured instrument in relation to the curvature of the canal, and the techniques applied to each case. This review aims to update the present status on removal of fractured instruments to identify factors and variables that could affect the success of fractured instrument retrieval based on both the preparation techniques and the instrument retrieval techniques. On the other hand, future directions of fractured instrument retrieval should focus on management of non-visible fractured instruments since the removal of those instruments are deemed unpredictable with the current techniques, whereas the removal of visible fractured instruments are considered predictable now. Another possible direction of it is there might be no more instrument fracture due to possible significant changes in the root canal preparation technique which may dispense with the use of rotary instruments.

Effect of kinematics on the torque/force generation, surface characteristics, and shaping ability of a nickel titanium rotary glide path instrument: an ex-vivo study

AIM

To evaluate the effect of various rotational motions on the torque/force generation, surface wear, and shaping ability of the ProGlider glide path instrument (Dentsply Sirona).

METHODOLOGY

Mesiobuccal and mesiolingual canals of mandibular molars were selected based on the canal volume, length, angle of curvature (25°-40°), and radius of curvature (4-8 mm) after micro-computed tomographic scanning. The samples were randomly assigned to four groups (n = 13, each) according to movement kinematics [continuous rotation (CR; 300 rpm), optimum torque reverse motion (OTR; 180° forward and 90° reverse when torque > 0.4 N·cm), time-dependent reciprocal motion (TmR; 180° forward and 90° reverse), and optimum glide path motion (OGP; a combination of 90° forward, 90° reverse, 90° forward, and 120° reverse)]. Instrumentation was performed with an automated root canal instrument and torque/force analysing device. Maximum torque/force values, canal volume changes, and canal-centring ratios at 1, 3, 5, and 7 mm were evaluated. Surface defects (pits, grooves, microcracks, blunt cutting edges, and disruption of cutting edges) and spiral distortion on the ProGlider instrument were scored at the tip and 5 mm short of the tip before and after five consecutive uses with scanning electron microscopy. The Kruskal-Wallis test followed by Dunn's post-test with Bonferroni correction and Wilcoxon signed-rank test were used to analyse the data (α = 0.05).

RESULTS

OGP generated significantly less clockwise torque and greater upward force than other groups (P < 0.05). OGP resulted in significantly fewer surface defects than CR (P < 0.05). In OGP and CR, the tip exhibited more surface defects than 5 mm short of the tip (P < 0.05). CR resulted in greater volume changes than OGP and TmR (P < 0.05) and greater centring ratios (i.e., more deviation) than OGP at 1 mm and OTR at 3 mm (P < 0.05).

CONCLUSIONS

Under laboratory conditions using the ProGlider instrument, OGP generated significantly less clockwise torque and greater upward force than the other rotatory motions. OGP generated fewer superficial defects than CR, and the three modes of reciprocal rotation better maintained the apical curvature of root canals than CR with the ProGlider instrument.

Instrumentation Kinematics Does Not Affect Bacterial Reduction, Post-Operative Pain and flare-ups: A Randomized Clinical Trial

AIM

This randomized clinical trial aimed to assess the effect of instrumentation kinematics (reciprocation or continuous rotation) on bacterial reduction, post-operative pain and incidence of flare-ups after root canal treatment of single-rooted mandibular premolars with asymptomatic apical periodontitis.

METHODOLOGY

Sixty-six patients were included in this prospective, parallel, randomized clinical trial. Patients were randomly allocated into two groups (N=33) according to the kinematics of the shaping instrument: WaveOne Gold (WO) used in reciprocation or One Shape (OS) used in continuous rotation. Under complete asepsis, bacterial samples were taken before (S1) and after (S2) a standard cleaning and shaping protocol. Evaluation of bacterial reduction was done by both culture technique and quantitative real-time polymerase chain reaction (qPCR) analysis. Post-operative pain was evaluated using the visual analog scale (VAS) after 24, 48- and 72-hours following treatment, while flare-ups were recorded as a binary outcome (Yes/No). Independent and paired t-tests were used for inter and intragroup comparisons for bacterial count data respectively. For post-operative pain score, intergroup comparisons were analyzed using Mann-Whitney U test while intragroup comparisons were analyzed using Friedman test followed by pairwise comparisons utilizing Wilcoxon signed rank test with Bonferroni correction. The significance level was set at p≤0.05 within all tests.

RESULTS

All the allocated participants received the intervention and were analyzed. The comparison between culture and qPCR methods showed that qPCR analysis demonstrated significantly higher pre-instrumentation baseline bacterial count (p<0.05). The percentage of bacterial reduction, detected by either method, significantly decreased after instrumentation using either rotation or reciprocation kinematics (p<0.05). However, the difference between the WOG or OS files was statistically non-significant (p>0.05). The intra-group comparisons showed a significant reduction in post-operative pain with time (p<0.05) for both groups. However, the inter-group comparison demonstrated that the difference in post-operative pain after the use of either WOG or OS was statistically non-significant (p>0.05). The incidence of flare-ups between both groups was also not-significant (p=1).

CONCLUSIONS

Shaping kinematics, either rotation or reciprocation motions, had no impact on bacterial reduction and the incidence of post-operative pain and flare-ups after root canal preparation of single-rooted premolars with asymptomatic apical periodontitis.

Assessment of root dentin defect during retreatment procedure using various NiTi hand and rotary retreatment files: An In vitro study

Aim:

The aim of the current study was to evaluate the radicular dentin defect during retreatment employed diverse NiTi hand and rotary retreatment file systems.

Materials and Methods:

Eighty mandibular premolars with a single root and root canal that were recently extracted were gathered and stored. The premolars were subject to decoronation at cementoenamel junction (CEJ) beneath irrigation with water to attain a uniform radicular length of 16 mm. Gutta-percha cones were covered with sealer and introduced into the root canal up to the working length. Eighty teeth were allocated at random into four groups with each group consisting of 20 samples. Group I: Control, Group II: EdgeFile XR retreatment rotary files, Group III: ProTaper Universal retreatment files, and Group IV: MTwo retreatment files. Under constant water cooling, the roots were cut flat with a diamond disc at apical third (3 mm), middle third (6 mm), and cervical third (9 mm) points. Stereomicroscope was employed to visualize the sections below × 20 magnification.

Results:

A statistically significant difference was noted among the groups with respect to the formation of radicular dentinal defects at 3 mm (P < 0.01) and 6 mm (P < 0.001), while the sections at 9 mm did not exhibit any statistically significant difference (P > 0.598).

Conclusion:

Despite the limitations in this study, it was concluded that all the evaluated file systems efficiently eliminated root canal filling during the retreatment. In addition, it was noted that the EdgeFile XR group exhibited fewer root dentin defects in comparison with the MTwo and ProTaper Universal group of files.

Apical Extrusion of Debris during Root Canal Preparation with ProTaper Next, WaveOne Gold and Twisted Files

(1) Background: Apical extrusion of debris is an example of a complication that may arise during root canal treatment, and it has been proven to be an unavoidable occurrence during endodontic treatment by numerous authors. Even though it may not hinder the long-term outcome of treatment, it may lead directly to increased levels of postoperative pain and, therefore, lower levels of patient acceptance and satisfaction. The aim of the study was to assess the weight of apically extruded debris during root canal preparation with instruments that use different movement kinematics (rotary, reciprocating, and adaptive motion); (2) Methods: The study was performed using the Myers and Montgomery model. Sixty human premolar teeth were inserted into preweighed Eppendorf tubes and randomly classified into three groups. After manual glide-path preparation, teeth in each group were instrumented to working length set 1 mm short of the anatomical apex using the standard sequence provided by the manufacturers (for Group 1: ProTaper Next X1 & X2; for Group 2: WaveOne Gold Primary, for Group 3: Twisted Files SM1-SM3). Root canals were irrigated with 1 mL of 0.9% NaCl solution between each file insertion. The tubes with collected debris were stored in an incubator at 70 °C for 5 days in order to evaporate the liquid component. Measurement of the weight of extruded debris was performed by subtracting the preinstrumentation from the postinstrumentation weight of the tubes. The results were analyzed with Kruskal-Wallis ANOVA, with significance level set at 0.05; (3) Results: The weight of extruded debris was 0.337 mg (SD = 0.148) for Group 1, 0.305 mg (SD = 0.201) for Group 2, and 0.348 mg (SD = 0.135) for Group 3. (4) Conclusions: Engine-driven root canal preparation with the use of instruments ProTaper Next, WaveOne Gold and Twisted Files that use different movement kinematics (rotary, reciprocating, and adaptive motion) was associated with apical extrusion of debris to a similar extent.

Comparison of Apical Extrusion of Bacteria After Glide Path Preparation Between Manual K File, One G Rotary, and WaveOne Gold Glider Reciprocation Preparations

Objective:

To compare the amount of apically extruded bacteria between hand-filed preparations, rotary and reciprocation glide path preparations in curved canals of extracted teeth infected with Enterococcus faecalis.

Methods:

Forty mandibular first molar teeth were decoronated, fitted into rubber stoppers and fixed onto glass vials. The mesiobuccal canals from mandibular first molar teeth were infected with Enterococcus faecalis, then randomly assigned to one of five groups for glide path preparation: manual stainless-steel file (K-files), rotary file (One G), reciprocating file (WaveOne Gold Glider) and two control groups. After glide path preparation, 0.01 mL of saline was taken from the experimental vials. The solution was plated on tryptic soy agar and colonies of bacteria were counted as colony-forming units. The results were analysed statistically using Kruskal-Wallis and post hoc Mann-Whitney U tests.

Results:

The manual K-file group was associated with significantly more bacteria extrusion compared to the rotary and reciprocating groups (P<0.05). However, no significant difference occurred between rotary and reciprocation instruments.

Conclusion:

All instrumentation techniques resulted in a measurable amount of apical extrusion of bacteria. Manual K-files extruded the highest quantity of bacteria compared to One G rotary file and WaveOne Gold Glider reciprocation file during glide path preparation.

Cyclic Fatigue Resistance of Blue Heat-Treated Instruments at Different Temperatures

The main aim is to evaluate the cyclic fatigue resistance of blue heat-treated instruments with different kinematics. Twenty-four endodontic instruments of the same brand were used for each of three experimental groups: VB (Vortex Blue 40/0.04), RB (RECIPROC Blue 40/0.06), and XB (X1 Blue 40/0.06). The instruments were randomly distributed and subjected to temperatures of 20°C and 37°C. The fatigue test was performed using a stainless steel device. Data were analysed using the Shapiro-Wilk test, Student's t-test, the F test, and Tukey's and Tamhane tests at significance level P=0.05. The instruments' cyclic fatigue resistance at both temperatures differed significantly for each instrument type (P < 0.001). The RB instruments displayed greater cyclic fatigue resistance at the tested temperatures compared with the VB and XB instruments (P < 0.001). Reciprocating kinematics positively influenced cyclic fatigue resistance. Blue heat-treated instruments showed decreased cyclic fatigue resistance as the temperature increased (P < 0.001).

Comparison of Cyclic Fatigue Resistance of Heat-Treated Nickel-Titanium Reciprocating Instruments at the Intracanal Temperature

Background/Aim: The aim of the present study was to compare the cyclic fatigue resistance of NiTi files running with reciprocal motion and having different characteristics (RPC Blue, WOG, EndoArt Wise Reciproc Gold, EndoArt Wise Reciproc Blue) at the intracanal temperature (35°C) by using NaOCl irrigation solution.

Material and Methods: Totally 60 WaveOne GOLD (Dentsply-Sirona, Ballaigues, Switzerland), Reciproc Blue (VDW, Munich, Germany), EndoArt Wise Reciproc Gold, and EndoArt Wise Blue (Inci Dental Productions Co, Istanbul, Turkey) (n= 15) files were used. Each of the rotary files were tested at the intracanal temperature (35°C) using a dynamic model in a stainless-steel artificial canal with an inner diameter of 1.5 mm, 60° angle of curvature, and 2mm radius of curvature until fracture occurred. The device automatically stopped at the moment of fracture and the number of cycles to the fracture was calculated as per second. The lengths of fractured parts were measured using a digital microcaliper. The One-Way Analysis of Variance (ANOVA) and Tukey’s post-hoc tests were used for intergroup comparisons.

Results: In 2 mm Radius of curvature, the EndoArt Wise Reciproc Blue group had a significantly higher time to fracture followed by the EndoArt Wise Reciproc Gold, Resiproc Blue, WaveOne Gold. No significant difference was found between EndoArt Wise Reciproc Gold and Resiproc Blue groups (P>0.05). Among the groups, there was no statistically significant difference in the lengths of fractured parts of the instruments (P> 0.05).

Conclusions: EndoArt Wise Reciproc Blue files exhibited significantly higher cyclic fatigue resistance compared with other files tested in a 2-mm radius of curvature and a 60° angle in an artificial canal at the intracanal temperature.

Cyclic fatigue resistance for six types of nickel titanium instruments at artificial canals with different angles and radii of curvature

This study evaluated the cyclic fatigue resistance for six types of 25# NiTi instruments. A traditional manufacturing instrument, an M wire instrument, a gold treatment instrument, a controlled memory (CM) wire instrument, a CM wire instrument with electrical discharge machining (EDM), and an R-phase heat treatment instrument, were operated in the different curved artificial canals. The fracture time (FT) and number of cycles to fracture (NCF) of the NiTi instruments were higher at 45° angles and double-curvature canals than at 60° angles. Except for the instruments with gold technology and EDM technology, others showed the longest FT and the highest NCF at an 8 mm radius of curvature. Morphological characteristics of cyclic fatigue were exhibited on the cross-section and lateral view of fracture fragments. The use of M-wire, R-phase wire, CM-wire, gold technology, EDM technology, and reciprocating movement were beneficial to enhance the cyclic fatigue resistance of NiTi files.

Evaluation of type of kinematics on glide path procedures and torsional fatigue resistance after preparation of moderately curved canals

Sixty moderately curved canals of mandibular molars classified as Vertucci's type IV canal configuration were selected by micro-CT 1174. The teeth were divided into two groups according to the kinematics used, whether reciprocating or rotary motion (n=30, totaling 60 mesial root canals). The instruments used to perform the glide path procedures had identical features (0.15 mm of tip size, 0.04 mm/mm taper, thermal treatment, and square cross-section), but differed in the direction of the cutting blade. The duration of the procedure and the absolute and percentage frequency of the instruments to reach the full working length were recorded. The torsional test (3630-1; 1992) was performed on both used and unused instruments, to evaluate a possible reduction in the torsional resistance when using the glide path procedure. Statistical analysis was performed using the unpaired t-test and the chi-square test, and the level of significance was set at 5%. The type of kinematics used affected the duration of glide path procedures, and the reciprocating motion seemed to induce less torsional stress during glide path procedures.

Micro-computed tomography evaluation of dentinal microcracks following canal preparation with thermomechanically heat-treated engine-driven files

This study aimed to evaluate and compare the frequency of microcracks and its severity at different root canal dentin locations, after preparation with thermomechanically heat‐treated engine‐driven nickel‐titanium instruments. Forty mandibular premolars were assigned to four experimental groups (n = 10): ProTaper Next, ProTaper Gold, WaveOne Gold and Reciproc Blue. After pre‐instrumentation micro‐computed tomography scans, the root canals were prepared to size 25. Following post‐instrumentation scans, pre‐ and post‐instrumentation scanned images were analysed for the presence and extent of dentinal defects. A total of 56 500 cross‐sectional images were obtained, showing that less than 2.3% with pre‐existing dentinal microcracks. No new microcracks were identified during the post‐instrumentation analyses. No significant association was found between the types of dentinal defects, file motions and sequences. Thermomechanically heat‐treated rotary files did not induce the formation of new microcracks. There was also no association between the kinematic motions and sequences of the rotary instruments to the types of dentinal defects.

Optimum glide path motion is safer than continuous rotation of files in glide path preparation

This study evaluated the resistance to flexural fatigue and torsional strength of files for glide path preparation in continuous rotation or Optimum Glide Path motion (OGP). ScoutRace 15.02 and ProGlider 16.02 files were used in a dynamic testing device during preparation of simulating curved root canals (40-degree curvature and 5 mm radius). For the torsional test, a machine was used to test torsion measured maximum torsional strength (N.cm). Two-way anova and Tukey's multiple comparisons test were used for statistical analysis. Files in OGP motion had a statistically better resistance to flexural fatigue (P < 0.05). ProGlider files took longer time to failure than ScoutRace files only when OGP was used (P < 0.05). The torsional test revealed that OGP produced significantly less torsional stress than rotary motions for both types of glide path files (P < 0.05) In conclusion, OGP motion increased substantially the mechanical safety of endodontic glide path files.

Shaping ability of a new heat-treated NiTi system in continuous rotation or reciprocation in artificial curved canals

The purpose is to evaluate canal transportation of a new heat-treated NiTi system, the Endostar E3 Azure operated in continuous rotation or reciprocation. 40 resin blocks were divided into two groups. The first was shaped in continuous rotation while the second in reciprocation. A preoperative and two postoperative images were taken, one after the use of the 20/06 and one after the 25/06. The images were superimposed to determine canal transportation. Time required for canal shaping was recorded. One-sample and student t tests, repeated-measure analyses of variance, univariate analyses and Bonferroni multiple comparisons tests were used for statistical analysis. The significance level was set at p < 0.05. There was no significant difference between continuous and reciprocating motion with the 20/06 and 25/06, respectively, at 1 mm (p = 0.761, p = 0.559), 2 mm (p = 0.584, p = 0.810) and 3 mm (p = 0.651, p = 0.070). The reciprocating motion showed significantly less canal transportation at 5 mm (p = 0.049, p < 0.001) and 7 mm (p < 0.001, p < 0.001) for the 20/06 and 25/0.6. Continuous rotation was more time-consuming than reciprocation (p < 0.001). The Endostar E3 Azure in reciprocation respected the original canal curvature better than in continuous rotation at all levels, and required less time to prepare artificial curved canals. Endodontists should know the shaping abilities of novel heat-treated NiTi files, regarding canal transportation and its relation with the instruments' motion and apical diameter enlargement.

A laboratory study of the scouting ability of two reciprocating glide path instruments in mesial root canals of extracted mandibular molars

AIM

To evaluate in a laboratory setting the performance of two reciprocating glide path systems, WaveOne Gold Glider (WO) and R-Pilot (RP), to create a glide path in mesial root canals of mandibular molars and to assess the torsional resistance of instruments after performing the glide path.

METHODOLOGY

A total of 60 mesial root canals of extracted human mandibular molars were divided into two groups (n = 30) according to the glide path system to be used. The data from the volume of each canal, acquired by microcomputed tomography (micro-CT), were validated statistically for the anatomical pairing of the groups. Preparation time, frequency in gaining apical patency, plastic deformation rate of instruments, and canal transportation and centring ability were recorded and compared statistically. The torsional fatigue of the instruments after use was also evaluated. Data were analysed using Fisher's exact test and Mann-Whitney U-test with a 5% significance level.

RESULTS

No significant differences were found between groups regarding the time required to perform the glide path, the frequency distributions of the canals classified as patent and the instruments with plastic deformation after use (P > 0.05). No significant differences were found between groups regarding the degree of canal transportation and centring ability at the cervical, middle and apical thirds (P > 0.05). The RP groups had significantly greater maximum torsional strength values compared with the WO groups (P < 0.05). The used WO group had greater angular deflection to fracture when compared to the new WO group (P < 0.05). A significant difference was also found in the percentage of loss of angular deflection in a comparison of the WO group with the RP group (P < 0.05).

CONCLUSIONS

The WO and RP instruments performed the same in terms of preparation time, plastic deformation, gaining apical patency, degree of canal transportation and centring ability. The RP instruments had greater torsional strength, less angular deflection and lower percentage of loss in angular deflection than the WO. The used WO group had the greatest angular deflection values.

Effect of XP-endo Shaper versus conventional rotary files on postoperative pain and bacterial reduction in oval canals with necrotic pulps: a randomized clinical study

AIM

To assess postoperative pain and bacterial reduction following the use of XP-endo Shaper versus conventional rotary files in preparation of oval canals with necrotic pulps.

METHODOLOGY

This superiority, parallel, randomized, double blinded clinical trial was conducted in the clinic of the Endodontic Department, Faculty of Dentistry, Cairo University, Egypt. Sixty single-canalled mandibular premolars with necrotic pulps were randomly assigned into two equal groups. Canals were instrumented using XP-endo Shaper files in the intervention group and iRaCe rotary files in the control group. Bacterial samples were taken before and after canal instrumentation. Incidence and severity of postoperative pain was assessed using a modified VAS after 6, 12, 24 h and daily for 5 days. A culture method was used to assess the number of bacterial colony forming units. Incidence of analgesic intake as well as flare-ups was recorded. Data were analysed using chi-square, Fisher Exact, Mann-Whitney, Independent t-test, and Spearman's correlation for pain and bacterial counts.

RESULTS

The XP-endo Shaper compared with the iRaCe group was associated with a significantly lower incidence of postoperative pain at 6, 12, and 24 h (P = 0.039, 0.047, and 0.026, respectively), and severity of postoperative pain at 6 h (mean difference: 1.33, 95% CI: 0.307-2.352, P = 0.02), 12 h (mean difference: 1.1, 95% CI: 0.26-1.936, P = 0.007), 24 h (mean difference: 0.94, 95% CI: 0.178-1.701, P = 0.008) and 48 h (mean difference: 0.97, 95% CI: 0.192-1.747, P = 0.038). There was a significant decrease in bacterial count following canal instrumentation in both groups (P < 0.001) with no significant difference between them (mean difference: 0.83 × 10⁵ , 95% CI: 0.336 × 10⁵ -1.996 × 10⁵ , P = 0.56). A weak correlation existed between postoperative pain severity and bacterial counts (P = 0.54). There was no significant difference in analgesic intake between the two groups (P = 0.085). Flare-ups occurred in 3.3% of teeth in the iRaCe group, while no flare-ups occurred in the XP-endo Shaper group.

CONCLUSIONS

XP-endo Shaper was associated with a significantly lower frequency of postoperative pain for up to 24 h, and lower severity of postoperative pain for up to 48 h compared with iRaCe files. Both systems were equally effective in bacterial reduction from oval root canals with necrotic pulps.

Comparison of apical debris extrusion using clockwise and counter-clockwise single-file reciprocation of rotary and reciprocating systems

The aim was to evaluate apical debris extrusion produced by a single-file system used in counter-clockwise reciprocation and compare it to rotary single-file systems used in clockwise rotation and clockwise reciprocation. A total of 100 first mandibular molars were divided into five groups (n = 20): (i) WaveOne Gold Glider and Primary instrument in counter-clockwise reciprocation; (ii) One G and One Curve file in clockwise rotation; (iii) One G and One Curve file in clockwise reciprocation; (iv) TruNatomy Glider and Prime instrument in clockwise rotation; and (v) TruNatomy Glider and Prime instrument in clockwise reciprocation. Apical debris extruded was measured after glide path preparation and canal preparation. WaveOne Gold displayed significantly higher amounts of apical debris extrusion in all the groups (P < 0.05). The lowest mean values were recorded by clockwise reciprocation groups: TruNatomy Glider, One Curve and TruNatomy Glider and Prime combined value, for glide path, canal preparation and combined mean values, respectively.

Micro-computed Tomographic Assessment and Comparative Study of the Shaping Ability of 6 Nickel-Titanium Files: An In Vitro Study

INTRODUCTION

This research studies and compares the shaping ability of WaveOne Gold (WG; Dentsply Tulsa Dental Specialties, Tulsa, OK), the Reciproc Blue (RB; VDW, Munich, Germany), TRUShape (TS, Dentsply Tulsa Dental Specialties), XP-endo Shaper (XP; FKG, La Chaux-de-Fonds, Switzerland), iRace (IR, FKG), and TruNatomy (TN; Dentsply Sirona, Ballaigues, Switzerland) in the preparation of moderately curved canals and using micro-computed tomographic technology.

METHODS

Sixty lower molars with 2 mesial canals were randomly distributed into 6 groups of 10 molars and 20 canals per group (n = 20). Specimens were scanned before and after preparation using the SkyScan 1275 (Bruker microCT, Kontich, Belgium). Group 1 was treated with WG, group 2 with RB, group 3 with TS, group 4 with XP, group 5 with IR, and group 6 with TN. After instrumentation, researchers quantified the changes produced in the canal geometry in terms of surface, volume, structure thickness, surface convexity index, structure model index, percentage of surface touched, and centroids. Wilcoxon and analysis of variance tests were performed to compare the values before and after preparation and the differences between groups. The significance level was established at 5%.

RESULTS

There were no significant differences between WG and RB (P > .05) and between TN and XP (P > .05). TN had significant differences with WG, RB, TS, and IR (P < .05). All the files produced similar apical transportation (P > .05).

CONCLUSIONS

WG and RB and TN and XP had similar shaping effectivity. TS and WG touched the highest percentages of canal surfaces (81% and 73%, respectively) but produced the biggest changes in the canal anatomy. TN and XP better kept the canal anatomy, but TN touched the lowest percentage of canal surface (50%). All the files used were able to clean and to shape moderately curved canals with minimal apical transportation.

Clinical fracture incidence of rotary and reciprocating NiTi files: A systematic review and meta-regression

This systematic review was registered in PROSPERO (CRD42017075917) and aimed to investigate whether the available clinical evidence supports the hypothesis that reciprocating motion results in a lower incidence of nickel-titanium files fracture compared to continuous rotation. Clinical studies that reported the incidence of fracture of engine-driven nickel-titanium files were included. The main exposure was the kinematics, and the primary outcome was the incidence of files fracture. The overall incidence of files fracture was 2.27%, with a trend for higher incidence with rotary motion (2.43%) than with reciprocating (1.0%), though without significant differences. Multiple meta-regression models revealed that the use of nickel-titanium files in more than four teeth and less proficient operators were associated with a higher incidence of file fracture. There was no difference in the clinical incidence of fracture of nickel-titanium instruments between reciprocating and rotary motions; however, other factors were identified.

Canal transportation using Mani GPR or HyFlex NT during the retreatment of curved root canals: A micro-computed tomographic study

This study assessed the apical transportation using Mani GPR or HyFlex NT during the retreatment of curved root canals. Thirty-eight roots were analysed using micro-CT for the comparison of apical transportation produced by two retreatment systems. Longitudinal transportation, horizontal transportation, variation in the canal angle of curvature and variation in the canal/root width ratio were analysed. Longitudinal transportation was frequently observed, regardless of the system used. The canals retreated with Mani GPR showed a significantly higher horizontal transportation at 1 mm from the root apex (P < 0.01) and greater variation of the canal curvature angle (P < 0.01). The canal/root width ratio was similar between groups (P > 0.05). In conclusion, longitudinal transportation occurred more frequently in the mesial canal walls. Mani GPR showed greater horizontal transportation at 1 mm short of the apex, and higher variation of the canal curvature angle compared with HyFlex NT.

Influence of shaft length on torsional behavior of endodontic nickel-titanium instruments

Torsional stresses are one of the most frequent causes of intracanal separation of nickel–titanium endodontic instruments, which represents a great concern of endodontists. For this reason, torsional resistance of rotary instruments has been deeply investigated by determining all parameters that can influenced it, that can be summarized in: (1) Tooth-related factors, (2) Strategy-related factors and (3) Instrument-related factors. This study was conducted to examine the influence of shaft length on torsional resistance of a nickel–titanium rotary instrument and if it should be considered as an Instrument-related factor. With this aim, 120 Twisted Files Adaptive M-L (TFA M-L) NiTi instruments (SybronEndo, Orange, CA, USA) were divided into 6 experimental groups (n = 20), according to instruments length and size: Group 1, 20 TFA M-L1 25/08 23 mm; Group 2, 20 TFA M-L1 25/08 27 mm; Group 3, 20 TFA M-L2 35/06 23 mm; Group 4, 20 TFA M-L2 35/06 27 mm; Group 5, 20 TFA M-L3 50/04 23 mm; and Group 6, 20 TFA M-L3 50/04 27 mm. All instruments were submitted to a static torsional test, blocking each instrument at 3 mm from the tip and rotating it until its fracture. Torque to Fracture (TtF) and fragments length were registered and all data were statistically analyzed. Results showed that Groups 2, 4 and 6 had a higher TtF, respectively, than Groups 1, 3 and 5, which differ from the former just for shaft length. Group 6 showed the highest torsional resistance (1.31 ± 0.08 Ncm), whilst Group 1 the lowest (0.40 ± 0.08 Ncm). According to that, it can be stated that the longer the instrument, the higher the torsional resistance is, proving that shaft length should be considered as an important factor about torsional resistance.

Influence of different motions on the cyclic fatigue resistance of Reciproc and Reciproc Blue endodontic instruments

Aim

The aim of this study was to evaluate the cyclic fatigue resistance of Reciproc (RCP) and RPC Blue (RCPB) instruments used in continuous rotation, "RECIPROC" mode, and "WAVEONE" mode.

Materials and Methods

Sixty RCP and 60 RCPB R25 files were used. For each file type, three groups (n = 20) were defined depending on the used kinematics: continuous rotation, "RECIPROC" mode, and "WAVEONE" mode. A stainless-steel artificial canal with 60° angle and 5-mm radius of curvature was milled reproducing the size and taper of the used files. The test device was electrically heated to 35°C to simulate the clinical environment. All files were reciprocated or rotated until fracture. The time to failure and the length of the fractured fragments were measured. A fractographic examination was performed by scanning the electron microscopy to confirm the cause of fracture. Collected data underwent a two-way analysis of variance (α = 0.05).

Results

RCPB files exhibited better cyclic fatigue resistance than RCP. The "RECIPROC" motion yielded greater cyclic fatigue resistance than the "WAVEONE" movement; the least resistance was observed in the continuous rotation groups. No significant differences were found among groups in terms of length of the fractured fragment. The fractographic analysis confirmed that all scanned samples separated due to cyclic fatigue.

Conclusions

Within the limitation of the present study, the "RECIPROC" mode increased the cyclic fatigue resistance of the tested instruments compared to "WAVEONE" mode and continuous rotation. To prevent RCP and RCPB file separation, motion kinematics other than the native "RECIPROC" movement should be discouraged in the clinical setting.

Influence of glide path kinematics during endodontic treatment on the occurrence and intensity of intraoperative and postoperative pain: a systematic review of randomized clinical trials

Background

Preliminary canal enlargement (glide path preparation) may play a significant role in the development of pain. The aim of this systematic review of randomized clinical trials was to assess the influence of glide path kinematics during endodontic treatment on the occurrence and intensity of intraoperative and postoperative pain.

Methods

A search was performed in June 2019 in six electronic databases (PubMed, Scopus, LILACS, SciELO, Embase and Web of Science) and two grey literature databases (OpenGrey and OpenThesis). The bibliographic references of the eligible articles were also hand-searched. The included clinical studies assessed the occurrence and intensity of intraoperative and/or postoperative pain after root canal preparation without glide path preparation (WGP) or with glide path preparation using manual (M-GP), continuous rotary (CR-GP), or reciprocating (R-GP) instruments. The primary outcome was the occurrence and intensity of intraoperative and postoperative pain, while analgesic consumption was the secondary outcome. The full texts of the eligible studies were analyzed by two reviewers who performed calibration exercises to verify the risk of bias and quality of the individual studies using the Joanna Briggs Institute Critical Appraisal tool.

Results

From 1283 identified articles, only six studies were included in the qualitative analysis of the results, with a total sample of 884 patients/teeth. Three studies presented a high risk of bias, while three studies presented a moderate risk. Two studies reported that CR-GP causes lower pain levels than M-GP and WGP, and three studies showed no differences between CR-GP and R-GP. Regarding analgesic consumption, two studies found no differences among glide path kinematics, and one study reported lower consumption for CR-GP than for M-GP. Because of the limited number of studies and methodological differences, no statistical analyses were performed for the glide path kinematics comparisons.

Conclusions

Compelling evidence indicating a significantly different occurrence and intensity of pain among glide path kinematics is lacking.

The systematic review protocol was registered in the PROSPERO database [CRD42020139989].

Influence of Negotiation, Glide Path, and Preflaring Procedures on Root Canal Shaping-Terminology, Basic Concepts, and a Systematic Review

INTRODUCTION

Negotiation, glide path, and preflaring are essential steps in root canal shaping procedures. This report aimed to discuss the terminology, basic concepts, and clinical considerations of negotiation, glide path, and preflaring procedures and the influence of these steps on root canal shaping.

METHODS

This systematic review was undertaken following Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. The protocol has been registered with the International Prospective Register of Systematic Reviews (number CRD42019127021). A comprehensive literature search was performed by 2 independent reviewers using a selected search strategy in 2 electronic databases (PubMed and Scopus) until January 28, 2019. A further search was performed manually in endodontic journals. Studies investigating or comparing at least 1 shaping property resulting from root canal instrumentation with a glide path or preflaring in human extracted teeth or clinical studies were included.

RESULTS

The literature shows that the definition of glide path and preflaring procedures remains controversial, which requires an elaboration in the American Association of Endodontists' Glossary of Endodontic Terms. After the removal of irrelevant and duplicated articles, 98 articles were included. The impact of glide path preparation and preflaring on working length determination, apical file size determination, canal transportation, separation of endodontic files, shaping time, dentinal microcrack formation, and extrusion of debris was discussed. Because of heterogeneity among the included studies, quantitative synthesis was not performed for most of the parameters.

CONCLUSIONS

An evidence-based guideline is needed to define and correlate the basic concepts and current applications of each step of contemporary advancements in root canal instruments. Glide path preparation reduces the risk of debris extrusion, has no influence on the incidence of dentinal crack formation, and improves the preservation of the original canal anatomy. The creation of a glide path may have no impact on Reciproc files (VDW, Munich, Germany) in reaching the full working length. Preflaring increases the accuracy of working length determination. Further randomized clinical trials are required to evaluate the effect of a glide path and preflaring on root canal treatment outcomes.

Age-dependent root canal instrumentation techniques: a comprehensive narrative review

The aim of this article was to review age-dependent clinical recommendations for appropriate root canal instrumentation techniques. A comprehensive narrative review of canal morphology, the structural characteristics of dentin, and endodontic outcomes at different ages was undertaken instead of a systematic review. An electronic literature search was carried out, including the Medline (Ovid), PubMed, and Web of Science databases. The searches used controlled vocabulary and free-text terms, as follows: 'age-related root canal treatment,' 'age-related instrumentation,' 'age-related chemo-mechanical preparation,' 'age-related endodontic clinical recommendations,' 'root canal instrumentation at different ages,' 'geriatric root canal treatment,' and 'pediatric root canal treatment.' Due to the lack of literature with practical age-based clinical recommendations for an appropriate root canal instrumentation technique, a narrative review was conducted to suggest a clinical algorithm for choosing the most appropriate instrumentation technique during root canal treatment. Based on the evidence found through the narrative review, an age-related clinical algorithm for choosing appropriate instrumentation during root canal treatment was proposed. Age affects the morphology of the root canal system and the structural characteristics of dentin. The clinician's awareness of root canal morphology and dentin characteristics can influence the choice of instruments for root canal treatment.

Comparison of vibration characteristics of file systems for root canal shaping according to file length

Objectives

No studies have yet assessed vibration characteristics according to endodontic file length. Accordingly, the objective of the present study was to examine the vibration characteristics according to nickel-titanium file length and to compare these characteristics between different file systems.

Materials and Methods

A total of 45 root canal models were divided into 3 experimental groups (n = 15 each) based on the file system used (ProTaper Gold [PTG], ProTaper Next, or WaveOne Gold [WOG]). Each experimental group was further divided into 3 subgroups according to file length (21, 25, or 31 mm). An electric motor (X-SMART PLUS) was used in the experiment. For each file system, vibrations generated when using a size 25 file were measured and used to calculate the average vibration acceleration. The differences in vibrations were analyzed using 1-way analysis of variance and the Scheffé post hoc test with a confidence interval of 95%.

Results

In the PTG file system, significantly lower vibration acceleration was observed when using a 21-mm file than when using a 31-mm file. In the WOG file system, significantly stronger vibration acceleration was observed when using a 31-mm file than when using 21- or 25-mm files. Regardless of the file length, the WOG group exhibited significantly stronger vibration acceleration than the other 2 experimental groups.

Conclusions

In clinical practice, choosing a file with the shortest length possible could help reduce vibrations. Additionally, consideration should be given to vibrations that could be generated when using WOG files with reciprocating motion.

Freitas KM. In vitro Comparison of Apically Extruded Debris during Root Canal Retreatment with Rotary and Reciprocating Systems

Introduction:

The extrusion of apical detritus during the retracting procedure is very important, as, besides eliminating materials of radicular obturation, aggressive agents and products such as the remains of dentin taken out, and microorganisms are generally located in tissue around the roots, producing undesired effects, such as inflammation, acute pain, post-operatory pain and delays in the periapical treatment.

Objective:

To determine the amount of apically extruded detritus using rotary and reciprocating retreatment systems.

Methodology:

An experimental comparative study as conducted in which 40 single-rooted human first premolars were analyzed. The instruments used were ProTaper Universal files up to F3 and sodium hypochlorite, and the sealing was made through the hybrid technique Tager. They were then kept at 37ºC and 100% of humidity for 15 days so that the sealing material would seal. For the retracting procedure, experimental tubes previously weighted were used. The sample was divided randomly into two groups of 20 pieces. Group A: ProTaper R, and group B: Reciproc. Then, the irrigating material (distilled water) was evaporated from the tubes for 12 hours in a stove at 105ºC, and the experimental tubes were weighted in an analytical precision weighing scale 10-5g. The data was analyzed through the T Student with a significance level of 5%.

Results:

Results indicated that groups A and B, retreatment with rotational ProTaper R and reciprocating retreatment system (Reciproc) showed a similar difference of initial and final weights, indicating similar apical extrusion of detritus.

Conclusion:

Both systems extruded a similar amount of detritus during the retreatment procedures.

Reporting quality in systematic reviews of in vitro studies: a systematic review

Background: Systematic reviews (SRs) and/or meta-analyses of in vitro research have an important role in establishing the foundation for clinical studies. In this study, we aimed to evaluate the reporting quality of SRs of in vitro studies using the PRISMA checklist.Method: Four databases were searched including PubMed, Virtual Health Library (VHL), Web of Science (ISI) and Scopus. The search was limited from 2006 to 2016 to include all SRs and/or meta-analyses (MAs) of pure in vitro studies. The evaluation of reporting quality was done using the PRISMA checklist.Results: Out of 7702 search results, 65 SRs were included and evaluated with the PRISMA checklist. Overall, the mean overall quality score of reported items of the PRISMA checklist was 68%. We have noticed an increasing pattern in the numbers of published SRs of in vitro studies over the last 10 years. In contrast, the reporting quality was not significantly improved over the same period (p = .363). There was a positive but not significant correlation between the overall quality score and the journal impact factor of the included studies.Conclusions: The adherence of SRs of in vitro studies to the PRISMA guidelines was poor. Therefore, we believe that using reporting guidelines and journals paying attention to this fact will improve the quality of SRs of in vitro studies.