Apically Extruded Debris during Root Canal Instrumentation with Reciproc Blue, HyFlex EDM, and XP-endo Shaper Nickel-titanium Files

Assessment of Debris Extrusion in Curved Canals: An In Vitro Analysis of Various Single-File Endodontic Instrumentation Systems

Objectives

Rotary single-file endodontic systems are commonly used for root canal treatment. However, very few studies have evaluated the apical extrusion of debris generated by these systems during canal preparation at normal body temperature in laboratory conditions. The aim of this study was to evaluate the amount of apically extruded debris caused by seven different single-file endodontic instrumentation systems at body temperature in mandibular molar teeth with curved root canals.

Methods

One hundred forty mandibular first permanent molars were randomly divided into seven groups (n = 20) to be prepared by one of the following systems at 35°C: Reciproc Blue (REC Blue), WaveOne Gold (WOG), One Reci (OR), Neoniti, HyFlex EDM (HEDM), One Curve (OC), or XP Shaper (XPS). Debris was collected into preweighted Eppendorf tubes. The weight of the extruded debris was recorded by subtracting the weight of the tooth-free apparatus from the post-procedure weight. Data were analyzed by one-way ANOVA and Tukey's tests (p  < 5%).

Results

REC Blue, WOG, and OR groups extruded significantly more debris from the apex than XPS, OC, and Neoniti groups (p  < 0.05). No significant difference was observed among the XPS, OC, Neoniti, and HEDM groups (p  > 0.05).

Conclusion

All the instruments were associated with debris extrusion. However, REC Blue, WOG, and OR extrude significantly more debris than other instruments. The amount of debris with different files was REC Blue > OR > WOG > HEDM > OC > Neoniti > XPS. XPS, Neoniti, and OC caused significantly less extrusion of debris than REC Blue, WOG, and OR.

In vitro assessment of the roles of initial preparation size and solvent application on apically extruded debris in endodontically treated teeth

Background

This study investigated the effects of solvent use and initial canal enlargement size on apically extruded debris (AED).

Methods

The palatal roots of 60 upper molars were assigned to two groups based on the initial preparation size: F3 or F4 ProTaper Universal files. The roots were obturated using the single-cone technique. Each group was subdivided based on the retreatment procedures: with or without solvent. After evaporation, the Eppendorf tubes were weighed using an electronic balance. The data were statistically analyzed (P=0.05).

Results

Using a solvent enhanced the amount of AED in samples initially prepared up to F3 or F4 files (P<0.05). When the solvent was used, the AED was greater in samples initially prepared up to the F4 file (P<0.05); however, when the solvent was omitted, the results were reversed (P<0.05).

Conclusion

Both parameters had a role in AED. Solvents should be used cautiously during root canal retreatment because of the potential for apical extrusion of filling materials. Using files with smaller tapers during initial preparation might be beneficial when considering the amount of AED compared to those with larger tapers.

In vitro apical extrusion of debris and instrumentation time following root canal instrumentation with Reciproc and Reciproc Blue instruments and a novel stainless steel rotary system (Gentlefile) versus manual instrumentation

Background

This study compared apical extrusion of debris and instrumentation time following root canal instrumentation with Reciproc, Reciproc Blue, and Gentlefile (GF) rotary instruments versus the manual step-back technique.

Methods

This in vitro study was conducted on 80 extracted mandibular premolars with mature apices and a root curvature of<10°. The teeth were randomly assigned to 4 groups (n=20), standardized regarding working length, and placed in pre-weighed vials. The root canals were instrumented with Reciproc, Reciproc Blue, and GF systems and the manual step-back technique in the four groups. The vials containing the collected debris were then dried and weighed. The instrumentation time was also recorded for each group. Data were analyzed with one-way ANOVA and post hoc Games-Howell test (α=0.05).

Results

Minimum apical debris extrusion was noted in Reciproc, followed by Reciproc Blue, GF, and manual technique (P<0.05). Pairwise comparisons showed significantly lower apical extrusion of debris in the Reciproc compared with GF (P=0.015) and manual instrumentation (P=0.011) groups. The Reciproc system also had the shortest instrumentation time, followed by Reciproc Blue, GF, and manual instrumentation (P<0.05). Pairwise comparisons showed significant differences between all the systems (P<0.05) except between Reciproc and Reciproc Blue (P>0.05) in this respect.

Conclusion

Although all systems caused apical extrusion of debris, manual instrumentation caused maximum extrusion of debris. In contrast, the Reciproc system was superior to others regarding minimal apical extrusion of debris and the shortest instrumentation time.

The effect of different kinematics on apical debris extrusion with a single-file system

To compare the amount of extruded debris caused by different motions using a single-file system. Fifty mandibular first molar teeth were randomized into 5 groups (n = 10) according to the motion tested: Optimize Torque Reverse (OTR), TF Adaptive Motion (TFA), continuous rotation (CR), reciprocation motion (+ 150°, -30°) (REC), and Jeni motion (Jeni). One Curve single file 25/06 (Micro-Mega, Besançon, France) was used in all experimental groups. The root canals were irrigated with 2.5% NaOCl, and the extruded debris were collected at pre-weighted glass vials. The glass vials were kept inside an incubator for one week at 70 °C to dry out the irrigating solution. The extruded debris was quantified by subtracting the pre-instrumentation from the post-instrumentation weight of the glass vials. The time required for each instrumentation procedure was digitally recorded. All data were analyzed statistically with one way ANOVA and post hoc Tukey test (P < 0.05). All the motions extruded apically debris with Jeni mode caused significantly less debris extrusion than TFA, REC, and CR (P < 0.05) while no significant difference emerged with OTR. Preparation time was not significantly different in all groups. Within the limits of the present study, all the kinematics produced apically debris extrusion, with Jeni reporting a similar amount of debris compared with OTR and significantly less than TFA, REC, and CR. Preparation time was similar among the tested kinematics.

Impacts of different Nickel-Titanium rotary and reciprocating root canal preparation systems on the amount of apically extruded debris

This study aimed to evaluate the amount of apically extruded debris caused by different NiTi files. One hundred mandibular premolars were included in this study. The specimens were divided into five groups (n = 20): (i) TruNatomy, (ii) WaveOne Gold, (iii) 2Shape, (iv) ProTaper Next and (v) Reciproc Blue. The extruded debris was collected into preweighed Eppendorf tubes. These tubes were weighed again, and the net weight of debris was calculated. Data were statistically analysed, and the significance level was set at 5%. The least amount of extruded debris was observed in the TruNatomy group (p < 0.05). Statistically significant differences were not found among (iii), (iv) and (v) groups (p > 0.05). However, these groups resulted in significantly higher amounts of debris when compared to (i) and (ii) groups (p < 0.05). The results lead us to conclude that all instrumentation systems caused apical extrusion of debris at varying weights.

Comparative evaluation of debris and irrigation extruded apically using different design of needles and penetration depth - An In Vitro study

Aim

: The aim of this study was to measure the amount of material extruded in the periapical area using three irrigation needles (Max-I-Probe, NaviTip Fx and IrriFlex flexible needle).

Materials and Methods

: Mandibular premolars were selected for this study and glass vials were used to gather the extruded debris and they were preweighed. The samples were divided into two groups: Group A (1 mm penetration of needle from working length), which was subdivided into three subgroups: Subgroup A1: Irrigation was made by Max-I-Probe. Subgroup A2: Irrigation was made by NaviTip Fx. Subgroup A3: Irrigation was made by IrriFlex flexible needle. Group B (3 mm penetration of needle), which was subdivided into three subgroups: Subgroup B1: Irrigation was made by Max-I-Probe. Subgroup B2: Irrigation was made by NaviTip Fx. Subgroup B3: Irrigation was made by IrriFlex flexible needle. XP-endo Shaper was used for chemomechanical preparation. After removal from vials, the teeth were incubated and then removed from the incubator and weighed again three times. The average of the readings was taken. Analysis of variance (ANOVA) and least significance difference tests were applied to analyse data.

Results

: All of the needles caused debris extrusion. There was a significant difference between groups (P ≤ 0.001) according to the depth of penetration. The lowest value for debris was observed in subgroup B3 while subgroup A2 had shown the highest mean.

Conclusion

Results revealed that the design and depth of needles significantly affected the debris extrusion. Using more flexible needles and shorter penetration depth for irrigation so that we don't need to push the needles so far apically.

Post-Instrumentation Dentinal Microcracks Induced by Two NiTi Rotary Systems with Increased Super Elasticity and Shape Memory: A MicroCT Comparative and Methodological Ex Vivo Study

This study aimed to determine the incidence of dentinal microcracks after instrumenting the root canals of maxillary premolars using two novel rotary instrumentation systems. Micro-computed tomography (microCT) scans and images generated by sectioning and observation with a stereomicroscope were used to assess the specimens. Twenty-two freshly extracted maxillary premolars were collected and the specimens were divided into two groups of eleven. The tested radicular shaping systems were XP-Endo shaper and TRUShape (i.e., single file). The specimens were scanned with microCT pre- and post-instrumentation, and the newly formed microcracks were detected. The post-instrumentation scans were also compared with images obtained by sectioning method and stereomicroscope inspection, comparing the incidence of microcracks in either microCT scans or images. The results identified an overall incidence of 0.49% of newly formed microcracks, with no statistically significant differences (p = 0.689) between the shaping systems (0.11% for TRUShape and 0.87% for XP-Endo shaper). There were statistically significant differences (p < 0.001) between the microcracks incidence in microCT scans and the sectioning method (16.6% more for the latter). In conclusion, the results show that neither TRUShape nor XP-Endo shaper created dentinal microcracks during root canal instrumentation. The sectioning method with stereomicroscope evaluation overestimates the presence of microcracks with a statistically significant difference compared to microCT scans.

Incidence of Post-Operative Pain following a Single-Visit Pulpectomy in Primary Molars Employing Adaptive, Rotary, and Manual Instrumentation: A Randomized Clinical Trial

Background and Objectives. To differentiate the intensity of postoperative pain after primary molar pulpectomy employing manual instrumentation versus two single-file systems with different kinetics (the XP-Endo shaper file with adaptive instrumentation vs. the Kedo-SG blue file with continuous rotation instrumentation). Materials and Methods. This three-arm, single-blind, randomized clinical trial included assessing 75 healthy children between 4 to 9 years who required pulpectomy for primary molars (mandibular first and second). The three groups each had an equal number of children. Children in Group 1 had their teeth instrumented with the XP-endo Shaper, children in Group 2 had their teeth instrumented with the Kedo-SG Blue file, and children in Group 3 had their teeth instrumented manually using K-files. The degree of postoperative pain was measured using a four-point pain scale at 6-, 12-, 24-, 48-, and 72-h following therapy. Each participant's parent received five flashcards with four faces and a word characterizing each face. The data were analyzed using Kruskal-Wallis and chi-square tests. The level of significance was set to 5%. Results. During the follow-up period, there was a significant difference in postoperative pain intensity between the three groups. The XP-endo shaper was associated with considerably decreased post operative at the 6- and 12-h interval followed by Kedo-SG. The highest post-operative discomfort across the groups was related to the patients who underwent manual instrumentation. Conclusion. In comparison to rotary and manual instrumentation, postoperative pain severity was reduced with adaptive instrumentation.

Effect of different irrigation activation techniques on irrigation penetration into the simulated lateral canals

This study, in which a hundred human teeth with single straight canal were used, focused on the evaluation of contrast solution penetration ability into the simulated lateral canals activated by XP-endo Finisher (XPF), EDDY, Nd:YAG, and Er:YAG laser systems with three different observation methods. The root canals were prepared up to X4 at working length using the ProTaper Next system. The teeth were decalcified and simulated lateral canals were created with #8 K-file at 2, 4, and 6 mm levels. Then the teeth were cleared using methyl salicylate and divided into 5 equal groups according to irrigation activation techniques (CSI, XPF, EDDY, Nd:YAG, and Er:YAG laser). After the contrast solution was activated, images of the simulated lateral canals were obtained by a dental microscope, digital radiography, and CBCT. The contrast solution penetration scores at the 2, 4, and 6 mm levels according to irrigation activation techniques and observation methods were analyzed statistically using Kruskal-Wallis non-parametric analysis of variance Bonferroni test post hoc comparisons. With the other 2 parameters are ignored, the highest and lowest contrast solution penetration were observed at 6 and 2 mm simulated lateral canal levels (p < 0.05), in Er:YAG irrigation activation and CSI technique (p < 0.05), and in direct visual and digital radiographic observation method (p < 0.05), respectively. Within the limits of this study, it was determined that the contrast solution penetration into the simulated lateral canals decreased from the coronal to the apical and achieved with the most effective Er:YAG laser activation technique. In addition, direct visual observation was found to be the best method for the assessment of contrast solution penetration.

Root canal length changes during mechanical preparation due to different cervical enlargement patterns

This study aimed to evaluate the root canal real length (RL) changes due to the mechanical instrumentation use with different flaring magnitudes. After access cavity, 60 mesial root canals of mandibular molars were randomly separated in three groups: Hyflex EDM (HF; #25/.12, #10/.05 e #25/~), Reciproc Blue (RB; R25), and MTwo (M2; #10/.04, #15/.05, #20/.06 e #25/.06). The RL was defined as the apical limit, and 2.5% sodium hypochlorite irrigating solution was chosen. After the access cavity (RL 1), cervical flaring (RL 2), and complete chemical-mechanical preparation (RL 3), the RL was evaluated. The RL was evaluated by a blind examiner with the aid of a microscope (16x) placing the endodontic file stop at the coronary reference. When comparing length measurements, the RL was shorter before instrumentation than that after instrumentation. A reduction of 0.65 mm (HF), 0.61 mm (RB), and 0.48 mm (M2) was observed. However, among groups, no statistical differences were found (p > 0.05). Under the conditions tested, it can be inferred that all mechanical systems provoked RL variations, which emphasizes the need for constant verification of the odontometry, mainly before root canal obturation.

Effect of mode of rotation on apical extrusion of debris with four different single-file endodontic instrumentation systems: Systematic review and meta-analysis

This systematic review and meta-analysis evaluated whether single-file endodontic instrumentation systems with the reciprocating type of motion are responsible for more debris extrusion than single-file endodontic instrumentation systems with the full rotational type of motion. Electronic and manual searches were performed following the recommendations of Preferred Reporting Items for Systematic Reviews and Meta-Analysis - PRISMA. We included studies comparing rotary (Neoniti and/ OneShape) versus reciprocating (WaveOne and/ Reciproc) systems. We evaluated the quality of studies and performed statistical analysis using R-Project software. Eight studies of high quality were included to perform the meta-analysis. Subgroup analysis was also done. The overall risk of bias was too low. In conclusion, single-file reciprocating systems tend to generate more extrusion of debris than single-file rotary systems.

A single-file endodontic treatment: A promising endodontic concept

nema

Influence of pecking frequency at working length on the volume of apically extruded debris: A micro-computed tomography analysis

Background/purpose

There is no consensus to date on how many repetitive pecking motions at working length (WL) should be regarded as optimal during instrumentation. Therefore, this study aimed to evaluate the effect of pecking frequency at WL on the volume of apically extruded debris using three single-file systems in curved, oval-shaped canals.

Materials and methods

Forty-five single-rooted mandibular premolars with curved, oval-shaped canals were prescanned by micro-computed tomography, anatomically paired-matched, and randomly divided among three groups (n = 15 each): Reciproc Blue (RB), WaveOne Gold (WOG) and XP-endo Shaper (XPS). Samples were embedded in agarose gel to collect extruded debris. After preparation to the WL, each sample was rescanned after one, two, four, 10, and 20 pecking motions at WL, respectively. The debris volume was innovatively calculated by a modification of an existing method using micro-computed tomography. The apical preparation size was also measured. Data were compared using a two-way repeated-measures analysis of variance.

Results

All single-file systems extruded debris apically, irrespective of the pecking frequency at WL. The extruded debris volume correlated positively with the minor foramen size (P < 0.05); both increased with pecking frequency for each single-file system (P < 0.05). The minor foramen size corresponded to the instrument tip size when reaching the WL once.

Conclusion

To produce less debris extrusion and obtain a predictable foramen size corresponding to the instrument tip size, a single pecking motion may be preferred when using single-file systems. Caution should be exercised when applying the current results to clinical situations.

Retreatment of Experimental Carrier-Based Obturators with the Remover NiTi Instrument: Evaluation of Apical Extrusion and Effects of New Kinematics

The objective of this study is to evaluate the retreatment time and weight of apically extruded debris yielded by two different kinematics during the removal of different root canal filling materials. Forty straight single-rooted extracted teeth were instrumented with HyFlex CM files and obturated with two different techniques: 25.04 HyFlex experimental carrier-based obturators (Coltène/Whaledent, Altstätten, Switzerland) (group 1) or 25.04 single gutta-percha cones (Roeko Coltène/Whaledent, Altstätten, Switzerland) (group 2) and Guttaflow Bioseal as the sealer. Samples were divided into four subgroups (n = 10) according to the used kinematics for the removal of root canal filling materials: continuous rotation (A) or retreatment motion (B) with a Remover and HyFlex EDM Nickel-Titanium instruments activated with a CanalPro Jeni micromotor (Coltène/Whaledent, Altstätten, Switzerland). Time for retreatment was digitally recorded, and debris extruded from the apex was collected in Eppendorf tubes and weighted with an analytical balance. Data on retreatment time and apical extrusion were statistically analyzed with the Kruskal–Wallis test (p < 0.05). Working length was achieved in all the retreated samples. The removal of root filling material resulted significantly faster with the Jeni mode (p < 0.001), and the difference was significant for the removal of both filling materials (p < 0.05). No significant differences on debris extrusion between single cone and experimental obturators groups were noted (p > 0.05), and no significant differences between kinematics (continuous rotation vs. Jeni motion) were observed (p > 0.05). All the tested retreatment strategies lead to an extrusion of material from the apex, and the weight of apically extruded debris was similar. The use of the innovative CanalPro Jeni kinematics accelerates the time for the removal of root filling materials.

The effect of solution and gel forms of sodium hypochlorite on postoperative pain: a randomized clinical trial

Objectives

The aim of this study is to evaluate the effect of using gel and solution forms of NaOCI during the chemomechanical preparation of the root canals on postoperative pain at different time intervals.

Methodology

114 patients with mandibular molar teeth and symptomatic irreversible pulpitis were included in the study. All patients were divided into two groups based on the irrigant used during root canal preparation (n=57): Group 1, 5.25% NaOCI, Group 2, 5.25% NaOCI gel. All groups were filled with gutta-percha and AH Plus root canal sealer using single-cone technique. VAS scale (1-10) was used for postoperative pain assessment. After endodontic treatment, all patients were asked to record their postoperative pain levels at the 6th, 24th, 48th, 72nd hours, and 1 week later. The data were analyzed using Chi-Squared, Independent Samples T, Cochran Q and Friedman tests.

Results

Statistically significant difference was not found between the distributions of pain levels at different times according to the groups (p>0.050). A statistically significant difference was observed between the distributions of pain levels measured at different times in the solution group (p<0.001). A statistically significant difference was found between the distributions of pain levels measured at different times in the gel group (p<0.001). In both groups, highest postoperative pain levels occurred in the first 6 hours. Pain levels of the gel group as 38,5% mild, 17.3% moderate, 5.8% severe and pain levels of the solution group were obtained as 46.2% mild, 26.9% moderate, 9.6% severe at the 6th hour.

Conclusions

The use of the gel form of NaOCI during the chemomechanical preparation of the root canals showed similar postoperative pain when compared to the solution form.

Postoperative Pain after Use of the WaveOne Gold and XP-endo Shaper Systems: A Randomized Clinical Trial

INTRODUCTION

The present study aimed to clinically compare the incidence of postoperative pain after endodontic treatment of posterior teeth using the WaveOne Gold (WOG; Dentsply Sirona, Ballaigues, Switzerland) and XP-endo Shaper (XPES; FKG Dentaire, La Chaux-de-Fonds, Switzerland) systems.

METHODS

In a single-blind randomized clinical trial, 148 vital teeth with an indication for conventional endodontic therapy for prosthetic purposes were treated by 5 specialists following a preestablished protocol. All participants were unaware of the treatment they received. The teeth were randomly divided into 2 groups (n = 74) according to the instrumentation system used (the WOG group and XPES group). The treatments were performed in a single session. The participants were asked to rate the intensity of postoperative pain on a visual analog scale (no pain, mild pain, moderate pain, and severe pain) after 24, 48, and 72 hours and 7 days.

RESULTS

The incidence of postoperative pain was higher in the XPES group after 24, 48, and 72 hours compared with those in the WOG group (P < .05). Two participants in the WOG group experienced severe postoperative pain after 24 hours. None of the participants in either group reported pain after 7 days (P > .05, Mann-Whitney test).

CONCLUSIONS

Postoperative pain is expected after preparation of the root canal system with the WOG and XPES systems tested, but it only persists for a short period. Although more common after the use of the XPES system, the pain was classified as mild at all time points.

Debris Extrusion Using Reciproc Blue and XP Endo Shaper Systems in Root Canal Retreatment

This study aimed at assessing the performance of Reciproc Blue (RB) and XP Endo Shaper (XPS), used for canal retreatment on extracted teeth, in terms of debris extrusion and obturating materials removal. Thirty mandibular premolars were prepared to ProTaper X2 file, obturated using warm vertical compaction, and then incubated for 28 days at 100% humidity at 37°C. Teeth were randomly assigned into two groups, according to the system used for retreatment (RB and XPS). During retreatment, debris extruded beyond the apex was collected in preweighed Eppendorf tubes, and the retreatment time was measured. Afterward, the teeth were longitudinally sectioned to assess the remaining obturating materials. Data were statistically analyzed using the Mann-Whitney test and chi-square test at a 95% confidence level. All the samples had extruded debris at varying weights ranging from 0.125 mg to 3.680 mg. XPS extruded less debris than RB, but no difference was detected (Mann-Whitney test; P > 0.05). RB and XPS required 54.9 ± 17.9 and 22.3 ± 9.3 seconds to perform retreatment procedures, respectively (Mann-Whitney test; P < 0.05). The sealer was found in all the samples. Compared to the RB group, fewer samples with remaining gutta-percha were found in the XPS group (Chi-square test; P < 0.05). None of the files fractured during the retreatment procedure. The tested files appear to extrude debris beyond the apex. Although XPS was able to remove the gutta-percha completely from the majority of the canals, it was unable to remove the sealer.

Effect of XP-endo Shaper versus conventional rotary files on postoperative pain and bacterial reduction in oval canals with necrotic pulps: a randomized clinical study

AIM

To assess postoperative pain and bacterial reduction following the use of XP-endo Shaper versus conventional rotary files in preparation of oval canals with necrotic pulps.

METHODOLOGY

This superiority, parallel, randomized, double blinded clinical trial was conducted in the clinic of the Endodontic Department, Faculty of Dentistry, Cairo University, Egypt. Sixty single-canalled mandibular premolars with necrotic pulps were randomly assigned into two equal groups. Canals were instrumented using XP-endo Shaper files in the intervention group and iRaCe rotary files in the control group. Bacterial samples were taken before and after canal instrumentation. Incidence and severity of postoperative pain was assessed using a modified VAS after 6, 12, 24 h and daily for 5 days. A culture method was used to assess the number of bacterial colony forming units. Incidence of analgesic intake as well as flare-ups was recorded. Data were analysed using chi-square, Fisher Exact, Mann-Whitney, Independent t-test, and Spearman's correlation for pain and bacterial counts.

RESULTS

The XP-endo Shaper compared with the iRaCe group was associated with a significantly lower incidence of postoperative pain at 6, 12, and 24 h (P = 0.039, 0.047, and 0.026, respectively), and severity of postoperative pain at 6 h (mean difference: 1.33, 95% CI: 0.307-2.352, P = 0.02), 12 h (mean difference: 1.1, 95% CI: 0.26-1.936, P = 0.007), 24 h (mean difference: 0.94, 95% CI: 0.178-1.701, P = 0.008) and 48 h (mean difference: 0.97, 95% CI: 0.192-1.747, P = 0.038). There was a significant decrease in bacterial count following canal instrumentation in both groups (P < 0.001) with no significant difference between them (mean difference: 0.83 × 10⁵ , 95% CI: 0.336 × 10⁵ -1.996 × 10⁵ , P = 0.56). A weak correlation existed between postoperative pain severity and bacterial counts (P = 0.54). There was no significant difference in analgesic intake between the two groups (P = 0.085). Flare-ups occurred in 3.3% of teeth in the iRaCe group, while no flare-ups occurred in the XP-endo Shaper group.

CONCLUSIONS

XP-endo Shaper was associated with a significantly lower frequency of postoperative pain for up to 24 h, and lower severity of postoperative pain for up to 48 h compared with iRaCe files. Both systems were equally effective in bacterial reduction from oval root canals with necrotic pulps.

Shaping ability and apical debris extrusion after root canal preparation with rotary or reciprocating instruments: a micro-CT study

Objectives

The aim of this study was to evaluate the shaping ability of the TruShape and Reciproc Blue systems and the apical extrusion of debris after root canal instrumentation. The ProTaper Universal system was used as a reference for comparison.

Materials and Methods

Thirty-three mandibular premolars with a single canal were scanned using micro-computed tomography and were matched into 3 groups (n = 11) according to the instrumentation system: TruShape, Reciproc Blue and ProTaper Universal. The teeth were accessed and mounted in an apparatus with agarose gel, which simulated apical resistance provided by the periapical tissue and enabled the collection of apically extruded debris. During root canal preparation, 2.5% sodium hypochlorite was used as an irrigant. The samples were scanned again after instrumentation. The percentage of unprepared area, removed dentin, and volume of apically extruded debris were analyzed. The data were analyzed using 1-way analysis of variance and the Tukey test for multiple comparisons at a 5% significance level.

Results

No significant differences in the percentage of unprepared area were observed among the systems (p > 0.05). ProTaper Universal presented a higher percentage of dentin removal than the TruShape and Reciproc Blue systems (p < 0.05). The systems produced similar volumes of apically extruded debris (p > 0.05).

Conclusions

All systems caused apically extruded debris, without any significant differences among them. TruShape, Reciproc Blue, and ProTaper Universal presented similar percentages of unprepared area after root canal instrumentation; however, ProTaper Universal was associated with higher dentin removal than the other systems.

Apical debris extrusion during instrumentation of oval root canals in primary teeth using manual versus motorized files: an ex vivo study

This study aimed to assess the apical extrusion of debris during instrumentation of primary canines using three endodontic file types. Forty-five extracted primary canines were randomly assigned to three instrumentation groups (n = 15): Hand K-files; and the motorized Kedo-S files and XP-endo Shaper files. The apically extruded debris produced during the procedure was collected and dried in pre-weighed Eppendorf tubes, and the mass of debris was calculated. The time required for the endodontic procedure was also recorded. Analysis of variance (ANOVA) and Tukey’s post hoc test were used with a significance level set at 5%. XP-endo Shaper and Kedo-S files extruded significantly less debris compared with hand K-files with means of 0.84 ± 0.31 and 1.20 ± 0.67 mg respectively, compared to 2.13 ± 0.31 mg (p < 0.0001). No significant difference was found between the two motorized files. Less time was required to complete the procedure with the XP-endo Shaper compared to the hand K-files (p < 0.0001) and Kedo-S files (p < 0.0001). Within the limitations of the present study, it may be concluded that motorized files extruded less debris and required less instrumentation time compared to traditional K-files, which could benefit paediatric patients with root canal treatment needs.

Can kinematics, file diameter, and PUI influence the intracanal decontamination and apical bacterial extrusion?

The present study investigated the intracanal decontamination and apical extrusion of bacteria and debris from root canals instrumented with rotary and reciprocating systems (ProDesign Logic or ProDesign R), with different file diameters and using conventional syringe irrigation (CSI) or passive ultrasonic irrigation (PUI). Eighty extracted mandibular premolars were contaminated with Enterococcus faecalis and randomly assigned to eight experimental groups according to the root canal instrumentation and irrigation technique employed (n = 10): G1: Prodesign Logic 25.06; G2: Prodesign R 25.06; G3 and G4 were instrumented with the same single-file systems, respectively, using 35.05 diameters and CSI. G5, G6, G7, and G8 were instrumented like the previous groups, but with PUI. Apically extruded debris during instrumentation was collected into pre-weighed microtubes. The weight of the empty microtube was subtracted from the final weight to establish the amount of extruded debris. Bacteria from root canals and extruded debris were collected for a microbiological evaluation of colony forming units (CFU/mL). For statistical analyses, the Mann-Whitney and Kruskal-Wallis followed by the Dunn's tests were used (α = 0.05). All instruments caused extrusion of debris. For irrigation techniques, PUI promoted greater debris and bacterial extrusion (p < 0.05). The CFU/mL count indicated that the instrumentation of the experimental groups were equally effective in the decontamination of the root canal (p > 0.05). The systems tested (regarding file diameter and kinematics) were associated with similar amounts of apically extruded debris and root canal decontamination. PUI was associated with greater debris and bacterial extrusion.

Detection of Dentinal Microcracks in Radicular Dentin after Shaping with XP-endo Shaper, Neoendo Flex Files, and Hero Shaper Using Scanning Electron Microscope: An In Vitro Study

The study aimed to compare the extent of dentinal microcracks in the radicular dentin using hand K files and various types of rotary nickel-titanium (NiTi) file systems. Forty mandibular incisor teeth (human) were grouped for the study. The root apices were closed, and the canals were straight (<5°). The samples were divided into four groups (n = 10). Group 1-Hand K file system (SybronEndo, SA), Group 2-XP-endo Shaper (FKG Dentaire, La Chaux-de-Fonds, Switzerland), Groups 3-Neoendoflex file (Neoendo, Orikam, India), and Group 4-Hero Shaper files (Micro-Mega, Becacon, France). Sectioning was done at 3, 6, and 9 mm from the apex, perpendicular to the long axis using a diamond disc under water coolant. The cut samples were then observed through a scanning electron microscope at ×50 enlargement. The control group showed no microcracks except one sample in the coronal third, which was less significant. The difference in the amount of crack detected on comparing the different groups was significant. In the experimental groups, XP-endo Shaper group showed significantly less number of cracks than the Neoendo flex, and Hero Shaper groups. Within the limitations of this study, all the system, except hand K files, produced remarkable dentinal microcracks. Least cracks were seen in canals instrumented with XP-endo Shaper. It can also be noted that single file system causes less number of microcracks.

Comparison of apical debris extrusion using EDDY, passive ultrasonic activation and photon-initiated photoacoustic streaming irrigation activation devices

The study aimed to determine the effect of different irrigation activation systems on the amount of apical debris extrusion in mandibular molar teeth with curved root canals. Sixty extracted mandibular molar teeth were instrumented with HyFlex EDM system and divided into four groups according to irrigation techniques: passive ultrasonic irrigation (PUI), EDDY, photon-initiated photoacoustic streaming (PIPS) and manual irrigation (MI). After the final irrigation, the extruded irrigants were collected into Eppendorf tubes of known weights. The amount of extruded debris was obtained by subtracting the weight from the initial weight of the tube. The Kruskal-Wallis test was used for statistical analysis. EDDY caused significantly more debris extrusion than the other irrigation activation systems (P < 0.001). PUI caused less apical debris extrusion but there was no statistical difference between PUI, PIPS and MI (P > 0.05). The EDDY activation system was associated with the highest amount of debris extrusion in curved root canals.

Analysis of Force and Torque with XP Shaper and OneCurve Systems During Shaping of Narrow Canals

Objective:

The purpose of this laboratory-based study was to compare the shaping forces and torques developed by the XP Shaper (FKG Dentaire SA, La Chaux-de-fonds, Switzerland) and OneCurve (Micro-Mega, Besancon, France) systems during shaping of narrow canals.

Methods:

Mandibular premolars with a single canal were divided equally into two groups; XP Shaper and OneCurve (n=16 each). In both groups, the canals were shaped with XP Shaper file (30/01) or OneCurve file (25/O6) that was inserted three times until it reached the canal length. The tooth was surrounded by water under controlled simulated intracanal temperature throughout the experiment. The inward and outward peak forces and the peak torques were recorded and analyzed statistically using the Mann-Whitney test. The shaping times were analyzed using Student’s t-test. The significance level was set at 5%.

Results:

In both groups, the developed forces in both directions and the torques increased with the successive insertions of the file. In the two groups, the inward peak forces ranged from 0.33 to 3.12 N, while the outward peak forces ranged from 0.09 to 1.96 N. In the three insertions, the XP Shaper showed significantly lower peak forces in both directions. The peak torque developed in both groups ranged from 0.12 to 1.52 N.cm. XP Shaper had significantly lower torque values in all the insertions than OneCurve. The XP Shaper system was able to completely shape the canals in 33.4 seconds while the OneCurve system was able to completely shape the canals in 32.8 seconds.

Conclusion:

The XP Shaper system showed favorably lower force and torque values during canal shaping compared with the OneCurve system.

Debris extrusion during root canal preparation with nickel-titanium instruments using liquid and gel formulations of sodium hypochlorite in vitro

This study compared the amount of apically extruded debris during root canal preparation with three single-file systems using liquid and gel-based formulations of sodium hypochlorite (NaOCl) or distilled water. Seventy-two single-canalled roots were divided into three groups: HyFlex EDM (Coltene-Whaledent); Reciproc Blue (VDW); and F-One Blue (Shanghai Fanta) and then divided into three subgroups: NaOCl liquid (Imicrly), NaOCl gel (Cerkamed Medical) and distilled water. The amount of extruded debris was calculated by determining the dry weight of the debris collected. Data were analysed using Kruskal-Wallis test with Bonferroni correction. Debris extrusion occurred in all subgroups. Both the instrument and the irrigant had an impact. The F-One Blue tended to extrude the least debris, though no significant difference was observed in the pairwise comparisons between instruments. NaOCl liquid resulted in significantly more extruded debris than NaOCl gel or distilled water. The results lead us to conclude that the NaOCl gel reduced debris extrusion compared to NaOCl liquid.

Postendodontic pain in asymptomatic necrotic teeth prepared with different rotary instrumentation techniques

Objectives:

Materials and Methods:

Results:

Conclusion:

Debris Apically Extruded by Two Reciprocating Systems: A Comparative Quantitative Study

Objective  The objective of this study was to quantify the amount of debris apically extruded after instrumentation with two reciprocating systems.

Materials and Methods  Forty-two single-rooted mandibular premolars with only one straight root canal and apical diameter compatible with a no. 15 K-file were randomly divided into two groups ( n  = 21) according to the instrument used: ProDesign R (Easy Equipamentos; Belo Horizonte, Minas Gerais, Brazil) and Reciproc Blue (VDW; Munich, Germany). Dry Eppendorf tubes were weighed three consecutive times for the initial mean weight. A silicone stopper was then fitted into the mouth of the tube. Each tooth was inserted through the stopper up to the cementoenamel junction and instrumented with one of the two systems to the predetermined working length (18 mm). The root canals were instrumented per root thirds. At each instrumented root third, the canal was irrigated with 3 mL of double-distilled water, followed by patency control. Each stopper was then separated from the tube and tubes were incubated at 70°C for 5 days. Tubes were again weighed, and the amount of extruded debris was calculated by subtracting the initial mean weight from the final mean weight.

Statistical Analysis  Results were analyzed using the Mann–Whitney test at a 5% significance level.

Results  No significant difference was observed in debris extrusion between the ProDesign R and Reciproc Blue systems ( p = 0.7557).

Conclusions  The two reciprocating systems tested produced similar amounts of postinstrumentation apically extruded debris.

Freitas KM. In vitro Comparison of Apically Extruded Debris during Root Canal Retreatment with Rotary and Reciprocating Systems

Introduction:

The extrusion of apical detritus during the retracting procedure is very important, as, besides eliminating materials of radicular obturation, aggressive agents and products such as the remains of dentin taken out, and microorganisms are generally located in tissue around the roots, producing undesired effects, such as inflammation, acute pain, post-operatory pain and delays in the periapical treatment.

Objective:

To determine the amount of apically extruded detritus using rotary and reciprocating retreatment systems.

Methodology:

An experimental comparative study as conducted in which 40 single-rooted human first premolars were analyzed. The instruments used were ProTaper Universal files up to F3 and sodium hypochlorite, and the sealing was made through the hybrid technique Tager. They were then kept at 37ºC and 100% of humidity for 15 days so that the sealing material would seal. For the retracting procedure, experimental tubes previously weighted were used. The sample was divided randomly into two groups of 20 pieces. Group A: ProTaper R, and group B: Reciproc. Then, the irrigating material (distilled water) was evaporated from the tubes for 12 hours in a stove at 105ºC, and the experimental tubes were weighted in an analytical precision weighing scale 10-5g. The data was analyzed through the T Student with a significance level of 5%.

Results:

Results indicated that groups A and B, retreatment with rotational ProTaper R and reciprocating retreatment system (Reciproc) showed a similar difference of initial and final weights, indicating similar apical extrusion of detritus.

Conclusion:

Both systems extruded a similar amount of detritus during the retreatment procedures.

Apically Extruded Debris Using Passive Ultrasonic Irrigation Associated with Different Root Canal Irrigants

Abstract The present study evaluated the amount of apically extruded debris after chemo-mechanical preparation (CMP) associated with passive ultrasonic irrigation (PUI) using four different root canal irrigants, namely, 6% sodium hypochlorite (NaOCl), 2% chlorhexidine gel + saline solution (2% CHXg+SS), 2% chlorhexidine solution (2% CHXs) and SS alone. Sixty mandibular premolars with single straight root canals were selected and randomly assigned into 4 groups (n=15) according to the root canal irrigant used as follows: G1 (PUI + NaOCl), G2 (PUI + CHXg+SS), G3 (PUI+CHXs) and G4 (PUI+SS). Reciproc® R25 files (25/.08) were used during CMP and the debris extruded from each tooth were collected in pre-weighted Eppendorf tubes and dried. The average weight of debris was assessed by using an analytical microbalance. Data were statistically analysed by using ANOVA and post-hoc Tukey’s test (a=0.05). Debris extrusion was observed in all groups, irrespective of the root canal irrigating, with 2% CHXg + SS being associated with lower debris extrusion compared to other irrigants (p<0.05). No significant differences were observed between 6% NaOCl, 2% CHXs and SS. In conclusion, passive ultrasonic irrigation did not completely prevent apically extrusion of debris. PUI performed with 2% chlorhexidine gel + saline solution significantly minimized debris extrusion compared to 6% sodium hypochlorite, chlorhexidine solution and saline solution.