Real-time Intracanal Temperature Measurement During Different Obturation Techniques

Comparison of obturation quality in natural and replica teeth root-filled using different sealers and techniques

OBJECTIVES

This study aims to assess the obturation efficacy of sealers placed with different techniques using microcomputed tomography (µCT) and assess the influence of µCT testing parameters on the obturation data obtained.

MATERIALS AND METHODS

Incisors and mesial roots of lower molars with standardized root length were scanned using µCT, and one tooth of each type was 3D printed in acrylic. Two obturation techniques (warm vertical and single cone) and 4 sealer types (AH Plus, BioRoot RCS, Totalfill BC, and Bio-C Sealers) were assessed following storage in Hank's balanced salt solution for 3 and 6 months by assessing gap and void volume percentages on both natural and replica incisor and molar roots. The storage solution was analysed to assess calcium ion leaching. The influence of temperature, tooth positioning, and moisture content of the teeth while µCT scanning was also investigated.

RESULTS

The obturation quality in the incisor group was the same using both natural teeth and replicas (p > 0.05). No changes in void volume were identified when comparing the same sealer using different obturation techniques. The premixed sealers used in single-cone obturation exhibited high void volume in the 3D printed replicas in the long term. The temperature, positioning, and moisture content of the teeth did not affect the outcome of µCT testing.

CONCLUSIONS

BioRoot RCS, Totalfill BC, and Bio-C Sealers are suitable for obturation of both complex and simple root canal systems using different obturation techniques with BioRoot RCS exhibiting the highest calcium ion release. 3D printed acrylic teeth can be used to assess the obturation quality in uncomplicated root canal systems. µCT parameters had no significant effect on the µCT measurement.

CLINICAL RELEVANCE

The single-cone obturation technique with hydraulic sealer is a simple technique that can be used for obturation of all root canal systems.

The Use of Premixed Calcium Silicate Bioceramic Sealer with Warm Carrier-Based Technique: A 2-Year Study for Patients Treated in a Master Program

Background: Recently several calcium silicate flowable sealers have been introduced as endodontic materials for the root canal. This clinical study tested the use of a new premixed calcium silicate bioceramic sealer in association with the Thermafil warm carrier-based technique (TF). Epoxy-resin-based sealer with the warm carrier-based technique was the control group. Methodology: Healthy consecutive patients (n = 85) requiring 94 root canal treatments were enrolled in this study and assigned to one filling group (Ceraseal-TF n = 47, AH Plus-TF n = 47) in accordance with operator training and best clinical practice. Periapical X-rays were taken preoperatively, after root canal filling and after 6, 12 and 24 months. Two evaluators blindly assessed the periapical index (PAI) and sealer extrusion in the groups (k = 0.90). Healing rate and survival rate were also evaluated. Chi-square tests was used to analyze significant differences between the groups. Multilevel analysis was performed to evaluate the factors associated with healing status. Results: A total of 89 root canal treatments in 82 patients were analyzed at the end-line (24 months). The total drop-out was 3.6% (3 patients; 5 teeth). A total of 91.1% of healed teeth (PAI 1-2) was observed in Ceraseal-TF, with 88.6% in AH Plus-TF. No significant difference was observed on healing outcome and survival among the two filling groups (p > 0.05). Apical extrusion of the sealers occurred in 17 cases (19.0%). Of these, 6 occurred in Ceraseal-TF (13.3%) and 11 in AH Plus-TF (25.0%). Three Ceraseal extrusions were radiographically undetectable after 24 months. All the AH Plus extrusions did not change during the evaluation time. Conclusions: The combined use of the carrier-based technique and premixed CaSi-based bioceramic sealer showed clinical results comparable with carrier-based technique and epoxy-resin-based sealer. The radiographical disappearance of apically extruded Ceraseal is a possible event in the first 24 months.

Thermal and volumetric assessment of endodontic filling techniques using infrared thermography and micro-CT

PURPOSE

To assess root temperature during filling techniques and quantify the volume of endodontic filling materials using infrared thermography (IT) and micro-computed tomography (micro-CT).

METHODS

Ninety premolars were divided into three groups: lateral condensation (LC), single cone (SC) and thermomechanical compaction (TMC). For thermal analysis, 45 teeth were assessed using a FLIR T650sc IT camera during filling techniques and 45 teeth were scanned using a Nikon micro-CT to assess gutta-percha, cement, and void volumes. Descriptive and inferential statistical analyses were performed (non-parametric Mann-Whitney test, Kruskal-Wallis test, and Friedman test with Tukey's bidirectional analysis of variance).

RESULTS

TMC showed the highest temperature increase at 15 s after the procedure and a significant temperature decrease at 45 s after its completion. TMC showed the largest volume of gutta-percha and LC the highest void volume.

CONCLUSION

The temperature increase generated by gutta-percha endodontic filling techniques is within acceptable limits. A greater volume of endodontic cement was observed for the SL and LC filling techniques.

Short and Long-Term Solubility, Alkalizing Effect, and Thermal Persistence of Premixed Calcium Silicate-Based Sealers: AH Plus Bioceramic Sealer vs. Total Fill BC Sealer

This study aimed to investigate the short- and long-term solubility, alkalizing potential, and suitability for warm-vertical compaction of AH Plus Bioceramic Sealer (AHBC), and Total Fill BC Sealer (TFBC) compared to the epoxy-resin sealer AH Plus (AHP). A solubility test was performed according to ISO specification 6876 and further similar to ISO requirements over a period of 1 month in distilled water (AD) and 4 months in phosphate-buffered saline (PBS). The pH of the immersion solution was determined weekly. Sealers were exposed to thermal treatment at 37, 57, 67, and 97 °C for 30 s. Furthermore, heat treatment at 97 °C was performed for 180 s to simulate inappropriate implementation of warm vertical filling techniques. Physical properties (setting time, flow, film thickness according to ISO 6876) and chemical properties (Fourier transformed infrared spectroscopy) were assessed. AHBC and TFBC were associated with significantly higher solubility than AHP over 1 month in AD and 4 months in PBS (p < 0.05). AHBC and TFBC both reached high initial alkaline pH, while TFBC was associated with a longer-lasting alkaline potential than AHBC. Initial pH of AHBC and TFBC was higher in AD than in PBS. None of the sealers were compromised by thermal treatment.

Minimal Dentinal Tubule Penetration of Endodontic Sealers in Warm Vertical Compaction by Direct Detection via SEM Analysis

Sealer staining using rhodamine B dye to investigate the penetration depth of endodontic sealers was proven unsuitable for this purpose. This study aimed to investigate the sealer penetration depth into dentinal tubules by scanning electron microscopy (SEM). Root canals of 52 human upper central incisors were instrumented using the ProTaper Gold NiTi system (Dentsply Sirona, York, PA, USA) up to size F3. After irrigation with sodium hypochlorite and citric acid combined with ultrasonic activation, the root canals were either filled using the epoxy resin sealer AH Plus (Dentsply Sirona) or the calcium silicate-based sealer Total Fill BC Sealer HiFlow (TFHF, FKG Dentaire, La Chaux-de-Fonds, Switzerland) by warm vertical compaction. Root slices of 1 mm thickness were obtained at 2 to 3, 5 to 6 and 8 to 9 mm from the apex. The root slices were investigated for sealer penetration into the dentinal tubules using SEM according to four root quadrants (buccal, mesial, oral, distal). Statistical analysis was performed by the Kruskal-Wallis test (p = 0.05) as data were not normally distributed according to the Shapiro-Wilk test. AH Plus penetrated significantly deeper into the dentinal tubules compared to TFHF at each root level (p < 0.05). Dentinal sealer penetration was deeper in the bucco-oral direction compared to the mesio-distal direction. AH Plus penetrated deeper into dentinal tubules than TFHF. Warm vertical compaction exerting high pressure on the root canal filling material is not able to press sealers deep into dentinal tubules as penetration depth values did not exceed a mean of 110 µm in SEM.

The effect of atmospheric cold plasma on the dentinal tubule penetration of calcium silicate-based sealer used with different obturation techniques: A confocal laser scanning microscopy study

The aim of this study was to evaluate the effect of atmospheric cold plasma (ACP) on dentinal tubule penetration of EndoSequence BC. Sixty premolars were divided into four groups according to the obturation technique and plasma treatment. Root canals were filled with single cone in Group 1 (SC), single cone after ACP application in Group 2 (SC-P), warm vertical compaction in Group 3 (WVC), warm vertical compaction after ACP application in Group 4 (WVC-P). Horizontal sections were imaged using confocal laser scanning microscopy. The maximum penetration and percentage of penetration values were measured. These data were statistically analysed (P < 0.01). In the coronal region, the percentage of penetration values were higher in SC-P and WVC-P than in SC and WVC. In the middle region, SC-P and SC showed a higher penetration percentage than WVC and WVC-P. In the apical region, WVC showed a higher percentage of penetration value than SC-P, WVC-P and SC did. Maximum penetration of WVC was higher than of SC and SC-P. Within the limitations of this study, ACP improved the percentage of penetration values of EndoSequence BC when used with single-cone technique.

Successful Pulp-Preserving Treatment for Peri-invagination Periodontitis of Double Dens Invaginatus With Oehlers Type IIIA and IIIB: A Case Report

Dens invaginatus (DI), which often occurs in the maxillary lateral incisor, is an important issue in endodontics because the treatment complexity increases depending on the degree of invagination and the vitality or nonvitality of the pulp. An 11-year-old female patient with a sinus tract in the gingiva of the maxillary lateral incisors showed peri-invagination periodontitis and double DI on radiography. Cone-beam computed tomographic imaging was used to examine the structure in the root canal in detail, and Oehlers type IIIA and IIIB DI was found. It was also shown that the patient's bone defect was caused by type IIIA. Because a healthy reaction was observed in the pulp test, the final diagnosis was peri-invagination periodontitis associated with type IIIA of the double DI with vital pulp. We expected the lesion to heal by treating only the type IIIA invaginated pseudo-root canal while preserving the healthy pulp. The invaginated root canal was cleaned under a microscope using ultrasonic instruments and nickel-titanium files to minimize irritation to the pulp. Because the lesion shrinkage was confirmed by cone-beam computed tomographic imaging taken 3 months after the start of treatment, vertical compaction of the warm gutta-percha technique was performed. At the 6-month postoperative recall, the pulp was normal, and the lesions were further improved. Treatment of the main root canal of double DI is complicated. However, proper diagnosis and careful cleaning of the invaginated root canal are essential for healing while preserving the pulp.

A comparative study of dentinal tubule penetration and the retreatability of EndoSequence BC Sealer HiFlow, iRoot SP, and AH Plus with different obturation techniques

Objectives

This study aimed to evaluate dentinal tubule penetration and the retreatability of EndoSequence BC Sealer HiFlow (HiFlow), iRoot SP, and AH Plus when using the single-cone (SC) or continuous wave condensation (CWC) technique.

Materials and methods

Sixty-five single-rooted teeth were instrumented and randomly divided into 5 groups: group 1, AH Plus/CWC; group 2, iRoot SP/CWC; group 3, iRoot SP/SC; group 4, HiFlow/CWC; and group 5, HiFlow/SC. The ability to re-establish patency during endodontic retreatment was recorded, as was the time taken to reach the working length. Dentinal tubule penetration and remaining debris after retreatment were evaluated by confocal microscopy and scanning electron microscopy. Data were analyzed by Kruskal-Wallis test and Dunn’s multiple comparisons test (α = 0.05).

Results

The HiFlow/CWC and iRoot SP/CWC groups required more time to reach the working length than groups that underwent the SC technique regardless of the sealer used (P < .05). The HiFlow/CWC group showed a significantly higher percentage of sealer penetration area than that of the iRoot SP/SC at 4 mm from the apex (P < .05) and penetrated deeper into dentinal tubules than iRoot SP/SC at both 8-mm and 12-mm levels (P < .05). Moreover, the HiFlow/CWC and HiFlow/SC groups demonstrated less remaining sealer along the canal wall than AH Plus/CWC group at 4-mm level (P < .05).

Conclusions

HiFlow/CWC technique showed better performance in dentinal tubule penetration than that of iRoot SP/SC. Both HiFlow and iRoot SP combined with CWC technique groups required more retreatment time than the other groups. Furthermore, using HiFlow with either the CWC or SC technique left less remaining sealer at 4-mm level than using AH Plus with the CWC technique during retreatment.

Clinical relevance

With favorable performance in dentinal tubule penetration and retreatability in endodontic retreatment, the combined use of EndoSequence BC Sealer HiFlow with the recommended continuous wave condensation technique may be a worthwhile choice in root canal treatment.

Physico-Chemical Investigation of Endodontic Sealers Exposed to Simulated Intracanal Heat Application: Hydraulic Calcium Silicate-Based Sealers

The aim of this study was to gain information about the effect of thermal treatment of calcium silicate-based sealers. BioRoot RCS (BR), Total Fill BC Sealer (TFBC), and Total Fill BC Sealer HiFlow (TFHF) were exposed to thermal treatment at 37 °C, 47 °C, 57 °C, 67 °C, 77 °C, 87 °C and 97 °C for 30 s. Heat treatment at 97 °C was performed for 60 and 180 s to simulate inappropriate application of warm obturation techniques. Thereafter, specimens were cooled to 37 °C and physical properties (setting time/flow/film thickness according to ISO 6876) were evaluated. Chemical properties (Fourier-transform infrared spectroscopy) were assessed after incubation of the specimens in an incubator at 37 °C and 100% humidity for 8 weeks. Statistical analysis of physical properties was performed using the Kruskal-Wallis-Test (P = 0.05). The setting time, flow, and film thickness of TFBC and TFHF were not relevantly influenced by thermal treatment. Setting time of BR decreased slightly when temperature of heat application increased from 37 °C to 77 °C (P < 0.05). Further heat treatment of BR above 77 °C led to an immediate setting. FT-IR spectroscopy did not reveal any chemical changes for either sealers. Thermal treatment did not lead to any substantial chemical changes at all temperature levels, while physical properties of BR were compromised by heating. TFBC and TFHF can be considered suitable for warm obturation techniques.

Real-time intracanal temperature measurement comparing mechanically and laser-activated irrigation to syringe irrigation

Antibacterial activity and tissue dilution of sodium hypochlorite (NaOCl) are improved by moderately heating the irrigant. Temperature can be risen by preheating or intracanal activation. To assess intracanal temperature development of NaOCl during irrigation activation and syringe activation (SI) in a closed system at 37°C, Type-K thermocouples were inserted close to the root canal of one human single-rooted maxillary canine at the apex and 5 and 10 mm from the apical foramen via drilled holes. The root was positioned in a plastic vial filled with alginate simulating surrounding biological structures. Experiments were performed in a closed environment at 37°C (n = 14): EA: EndoActivator (Dentsply Sirona), EDDY: EDDY (VDW), PUI: passive ultrasonic irrigation, PIPS: Photon-induced photoacoustic streaming (Fotona), S60: SI of 60°C-NaOCl, S45: SI of 45°C-NaOCl, and S20: SI of 20°C-NaOCl. S45, PUI and EDDY lead to minor intracanal temperature increases. EA and PIPS did not influence the intracanal temperature. SI with 60°C-NaOCl resulted in higher intracanal temperatures than activation systems. Temperature dissipation into simulated tissues buffered intracanal temperature changes.

Effect of heat application on the physical properties and chemical structure of calcium silicate-based sealers

OBJECTIVE

To determine the effect of heat application on the setting and chemical properties of HiFlow BC Sealer and compare to other calcium silicate (CSBS) and epoxy resin-based root canal sealers.

MATERIALS AND METHODS

AH Plus, BioRoot RCS (BioRoot), Endosequence BC (Endosequence), and HiFlow BC (HiFlow) sealers were placed at 37 °C or subjected to heat at 200 °C for 10 or 30 s, followed by incubation at 37 °C in a humidified incubator during experiments. Setting time, viscosity, and flow were assessed, and changes in chemical structure were evaluated using the Fourier-transform infrared spectroscopy (FTIR). Thermogravimetric analysis was also used to evaluate the weight change (%) of the sealers upon heating from room temperature to 37 °C or 200 °C at a rate of 20 °C/min. Data were analyzed using a two-way ANOVA with a Bonferroni post-hoc test (p = 0.05).

RESULTS

Application of heat extended the setting time for Endosequence and HiFlow but resulted in a faster setting of AH Plus and BioRoot. The highest flow and lower viscosity were observed in HiFlow at high temperature (p < 0.05), whereas the lowest flow with the highest viscosity and greatest weight loss were observed in BioRoot after heat application (p < 0.05). FTIR spectra demonstrated no changes to functional groups after heat application, except for the strong H-O-H absorption peak corresponding to water in BioRoot.

CONCLUSIONS

Endosequence and HiFlow showed similar chemical properties with a higher flow and lower viscosity in HiFlow after heat application. Heat application resulted in reduced flow, increased viscosity, and weight loss for BioRoot. The setting of AH Plus was fastened with heat, while its weight loss, viscosity, and flow characteristics were stable.

CLINICAL RELEVANCE

HiFlow, Endosequence, and AH Plus can be all used with WVC obturation techniques. Heat application resulted in minor changes in their physical properties including setting time, flow, weight loss, and chemical properties, while BioRoot showed a significant amount of weight loss, increase in viscosity, and reduced flowability after heat application.

The Outcome of Primary Root Canal Treatment in Postirradiated Patients: A Case Series

Osteoradionecrosis (ORN) of the jaw is considered the most severe long-term adverse effect that can occur in radiation therapy patients. Teeth extractions and dental diseases are the main risk factors for ORN in irradiated patients. The aim of this case series was to evaluate the outcome of primary root canal treatments performed on patients who underwent head and neck radiotherapy and to evaluate any ORN related to the endodontic treatment. In this case series, primary root canal therapies (absence of radiolucency) were performed on 10 teeth of 8 patients who underwent radiotherapy for head and neck cancers. Radiation doses to the periapical area were calculated using the radiotherapy planning computed tomographic scan. After a 277-day mean follow-up, all patients were asymptomatic, no teeth showed periapical radiolucency, and no ORN was observed. Even if a limitation of buccal opening occurred after radiotherapy and complicated the endodontic procedures, root canal therapy seemed to be safe and a valid alternative to tooth extraction.

Physico-chemical investigation of endodontic sealers exposed to simulated intracanal heat application: epoxy resins and zinc oxide-eugenols

AIM

To gain information in a laboratory setting about the effect of thermal treatment of epoxy resin-based and zinc oxide-eugenol-based sealers.

METHODOLOGY

AH Plus and Pulp Canal Sealer (PCS) were exposed to thermal treatment at 37, 47, 57, 67, 77, 87 and 97 °C for 30 s. According to clinically relevant considerations, intracanal sealer temperature is likely not to exceed 60 °C during warm vertical root canal filling. Heat application is recommended for less than 30 s during continuous wave technique, but might exceed this threshold in complex cases. Furthermore, heat treatment at 97 °C was performed for 60 and 180 s to simulate inappropriate implementation of warm vertical filling techniques. Specimens were heated inside 2-mL plastic tubes in a thermo-controlled water bath until the temperatures were reached and kept at this temperature for the determined period of time. Afterwards, specimens were cooled to body temperature and physical properties (setting time, flow, film thickness according to ISO 6876) were assessed. Chemical properties (Fourier transformed infrared spectroscopy) were assessed after complete setting of the specimens in an incubator at 37 °C and 100% humidity. Statistical analysis of physical properties was performed using Kruskal-Wallis test (P = 0.05).

RESULTS

The setting time of AH Plus and PCS decreased when temperature and duration of heat application increased. Whilst the setting time of AH Plus decreased from 622 min at 20 °C (for 30 s) to 381 min at 97 °C (for 180 s; P < 0.05), heat treatment of PCS at 97 °C for 180 s led to an immediate setting of the material. From 20 °C (for 30 s) to 97 °C (for 30 s), the setting time of PCS decreased from 80.1 to 41.0 h (P < 0.05). Film thickness and flow were not relevantly influenced by thermal treatment except for PCS at 97 °C for 180 s. FT-IR spectroscopy did not reveal any chemical changes of either sealer after thermal treatment.

CONCLUSIONS

Thermal treatment simulating clinically relevant temperature levels and heating times did not lead to any substantial physical or chemical changes at all temperature levels when heating did not exceed 60 s. AH Plus and Pulp Canal Sealer can be considered suitable for warm root filling techniques.