Long-term Outcomes of Endodontic Treatment Performed with Resilon/Epiphany

The efficacy of premixed bioceramic sealers versus standard sealers on root canal treatment outcome, extrusion rate and post-obturation pain: A systematic review and meta-analysis

BACKGROUND

Limited evidence is available regarding the superior clinical properties of bioceramic sealers comparted with traditional standard sealers.

OBJECTIVES

This review aimed to answer the following research questions: 'In healthy patients requiring a root canal treatment (P), what is the efficacy of premixed bioceramic sealers (I) compared with traditional root canal epoxy resin-based sealers (C) in terms of survival, success rates (PICO1) sealer extrusion and resorption (PICO2) post-obturation pain (PICO3) (O)?'

METHODS

Authors independently searched three electronic databases: PubMed (including MEDLINE), Web of Science, Embase and Scopus up to 31 October 2023. This was accompanied by both grey literature and manual search. Detailed selection criteria were applied, namely mature permanent teeth requiring root canal treatment, premixed bioceramic sealer with gutta-percha as an intervention group, a standard filling technique as control group and full-text available in English. A random-effect meta-analysis was used to synthesize the body of evidence regarding the use of bioceramic sealers in root canal treatment and their impact on post-obturation pain. Effect sizes were represented as relative risks on a logarithmic scale for binary outcomes and as mean differences for continuous outcomes.

RESULTS

A total of 941 articles were identified. Fifteen Comparative clinical studies were finally included. Eleven were randomized clinical trials, and four were prospective clinical trials with control group. The follow-up of these studies was not greater than 2 years. No publication bias was observed in any study. No significant differences were observed between the two groups in terms of survival and success rates. A small non-significant lower risk of extrusion was observed for bioceramics. A small, non-significantly lower post-operative-pain within 24-h was observed when bioceramics were used.

DISCUSSION

The majority of current evidence shows inconsistencies in reporting and is of short-term duration. Robust prospective long-term trials are needed in this area to better support future recommendations.

CONCLUSION

This systematic review is the first to analyse several clinical outcomes using premixed sealers. Included studies differed in terms of clinical protocol and operator expertise, but reported a similar outcome when comparing bioceramic versus standard sealers. Tooth survival, treatment outcome, post-operative pain and periapical extrusion were similar and presented no significant differences between the two sealer types.

REGISTRATION

PROSPERO database (CRD42023449151).

Evaluation of Immediate and Delayed Placement of Post on Sealing ability of Periapical Area: An Original Research

Objective

The purpose of this research is to compare the effects of post placement-immediate and delayed-on the periapical area's capacity to close after root canal therapy (RCT).

Techniques

A random split of sixty recently removed human single-rooted teeth was made into two groups: Group A received immediate post placement, whereas Group B received post placement after seven days. Standard guidelines were followed in the preparation of root canals and the placement of posts. A dye penetration method was used to measure microleakage, a measure of sealing capacity.

Findings

Compared to the immediate post placement group (0.62 ± 0.08) (P < 0.001), the delayed post placement group had a considerably lower mean microleakage score (0.35 ± 0.06), showing improved sealing capacity. In conclusion, post implantation done later enhances the periapical area's sealing capacity after RCT. This research underscores the significance of scheduling endodontic treatments to maximize treatment success and improve tooth retention, as well as the possible therapeutic advantages of postponing post implantation.

Evaluation of Immediate and Delayed Placement of Post on Sealing Ability of Periapical Area: An Original Research

Objective

The purpose of this research is to compare the effects of post placement-immediate and delayed-on the periapical area's capacity to close after root canal therapy.

Techniques

A random split of 60 recently removed human single-rooted teeth were made into two groups: Group A received immediate post placement, whereas Group B received post placement after seven days. Standard guidelines were followed in the preparation of root canals and the placement of posts. A dye penetration method was used to measure microleakage, a measure of sealing capacity.

Findings

Compared to the immediate post-placement group (0.62 ± 0.08) (P < 0.001), the delayed post-placement group had a considerably lower mean microleakage score (0.35 ± 0.06), showing improved sealing capacity. In conclusion, post implantation done later enhances the periapical area's sealing capacity after root canal therapy. This research underscores the significance of scheduling endodontic treatments to maximize treatment success and improve tooth retention, as well as the possible therapeutic advantages of postponing post implantation.

Ex vivo investigation on the effect of minimally invasive endodontic treatment on vertical root fracture resistance and crack formation

The evidence base on minimally invasive endodontic (MIE) treatment is limited. This study investigated the influence of MIE shaping on vertical root fracture (VRF) resistance and crack formation of root canal filled teeth. Human maxillary central incisors were randomized into six groups (n = 18, power = 0.9) and embedded in acrylic blocks with artificial periodontal ligaments. The root canals were either instrumented to size #40 and 0.04 taper (+MIE) or enlarged to ISO size #80 (-MIE). The canals were filled with cement-based (C) or adhesive resin-based (A) sealers in single-cone technique. The controls received no treatment or were left unfilled. After chewing simulation (staircase method, 25-150 N, 120,000×), the crack formation on the root surface was analyzed using stereomicroscope/digital imaging and classified (no defect, craze line, vertical crack, horizontal crack). Subsequently, the samples were loaded until fracture. The incidence of defects (56% vertical cracks) was not significantly different between the groups (p ≥ 0.077). VRF resistance was significantly higher in untreated teeth than in +MIE/C (p = 0.020) but did not significantly differ between the other groups (p ≥ 0.068). Minimal canal shaping did not reduce the risk of vertical root fracture and defects of root canal filled teeth.

Differential expression of circular RNAs in interleukin 6-promoted osteogenic differentiation of human stem cells from apical papilla

INTRODUCTION

Studies have shown that interleukin 6 (IL-6) can regulate stem cell osteogenic differentiation; however, the exact mechanism is not clear. Circular RNAs (circRNAs) are closed circular non-coding RNAs that are involved in the process of stem cell osteogenic differentiation. Therefore, the purpose of this present study was to investigate the effect of IL-6 treatment on osteogenic differentiation of human apical tooth papillae stem cells (hSCAPs), and to detect the difference in circRNA expression using gene microarray technology.

METHODS

After extraction and identification of hSCAPs, alkaline phosphatase (ALP) activity, alizarin red staining, and calcium ion quantitative assay were used to determine the changes of ALP enzyme, mineralized nodules, and matrix calcium levels before and after IL-6 treatment of hSCAPs gene microarray technology was used to analyze the changes in circRNA expression levels before and after IL-6 induction of mineralization. The four selected circRNAs were validated by qRT-PCR. Moreover, gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) were used to predict the potential functions and biological signaling pathways of circRNAs. Finally, these data are integrated and analyzed to construct circRNA-microRNA-mRNA networks.

RESULTS

Alp and Alizarin red staining confirmed that IL-6 promoted the osteogenic differentiation of hSCAPs. The gene microarray results identified 132 differentially expressed circRNAs, of which 117 were upregulated and 15 were downregulated. Bioinformatic analysis predicted that the circRNA-406620/miR-103a-3p/FAT atypical cadherin 4 (FAT4) pathway might be involved in regulating IL-6 to promote osteogenic differentiation of hSCAPs.

CONCLUSION

Differentially expressed circRNAs might be closely involved in regulating IL-6 to promote osteogenic differentiation of hSCAPs.

Effectiveness of root canal filling materials and techniques for treatment of apical periodontitis: A systematic review

BACKGROUND

Apical periodontitis (AP) is an inflammatory disease of the apical periodontium as sequelae of pulp death. It is managed by disinfection and filling of the root canal space.

OBJECTIVES

The aim of this systematic review was to investigate whether obturation techniques and materials used for root canal filling led to the management of AP.

METHODS

A systematic review protocol was written following the preferred reporting items for systematic reviews and meta-analyses (PRISMA) checklist and registered on the international prospective register of systematic reviews (PROSPERO; CRD42021260275) including two populations, interventions, comparisons, outcomes and time (PICOT) for the research questions querying the effectiveness of obturation techniques (PICOT 1) and materials (PICOT 2) for the management of AP. Electronic searches were conducted on PubMed, ScienceDirect, Scopus and Embase search engines. Searches on International Endodontic Journal, Journal of Endodontics, Clinical Oral Investigations, Journal of Dental Research and Journal of Dentistry websites were also conducted, until May 2021. Both primary (tooth survival) and secondary outcomes were evaluated. The risk of bias was assessed by Cochrane RoB2 for the randomized and ROBINS-I for the nonrandomized trials.

RESULTS

The search strategy identified 1652 studies, with 1600 excluded on the title and abstract screening, leaving 52 studies for full-text screening. In total, 10 studies met the inclusion criteria. The obturation technique and materials used did not affect the outcome of AP. Vertical compaction resulted in faster resolution of periapical lesions. The oral health-related quality of life of patients treated with lateral condensation exhibited poorer outcomes compared with single matched cone after 6 months of recall.

DISCUSSION

The inclusion and exclusion criteria used for this systematic review enabled the capture of all the literature available on the effect of obturation techniques and materials on the outcome of AP. The data were heterogenous, and a number of articles investigating obturation techniques had no information on the materials and techniques used as they looked at the quality of fill.

CONCLUSIONS

Included studies did not find any difference between different procedures (PICOT 1) and materials (PICOT 2). The risk of bias was high, thus the findings should be interpreted with caution.

REGISTRATION

PROSPERO registration number: CRD42021260275.

Influence of sealer type on treatment outcome of teeth with apical periodontitis: a systematic review

BACKGROUND

The purpose of this article was to Evaluate the influence of sealer on the outcome of non-surgical endodontic treatment or retreatment of permanent teeth with apical periodontitis (PROSPERO registration: CRD42020205951).

METHODOLOGY

A systematic review of original clinical studies was carried out following PRISMA guidelines to answer whether the type of sealer used in endodontic treatment or retreatment influences the repair of apical periodontitis determined by clinical and radiographic parameters. Electronic searches were performed in PubMed, Embase, Web of Science, Scopus, and the Cochrane Library database, until May 2023. Gray literature and a hand search of reference lists were also performed. The risk of bias was assessed using Cochrane RoB2 for randomized trials and the Newcastle-Ottawa Scale (NOS) for prospective and retrospective cohort and case-control studies.

RESULTS

Among 1046 studies, a total of 819 were selected by title and abstract, resulting in 23 for full-text review. In total, 11 studies met the inclusion criteria (1467 patients/teeth with apical periodontitis). The quality assessment using RoB2 included five randomized control trials, of which four had medium risk and one had a low risk of bias. According to the NOS scale, five studies were classified as low risk and one study was considered as medium risk of bias. The sealer type and obturation techniques varied, and the mean follow-up time was 3.7 years. Most studies used two-dimensional radiographic criteria to assess the treatment outcome sealers and not cements. Eight studies did not find significant differences when comparing cements. The healing rates ranged from 56.7% to 90%.

CONCLUSIONS

The results of this review support that the current endodontic sealers do not seem to influence the treatment outcome of permanent teeth with apical periodontitis. Although the studies had medium and low risk of bias, the results should be interpreted with caution. More randomized studies of long-term outcomes comparing filling materials are needed to strengthen this claim and allow for a meta-analysis.

Endodontic Outcome of Root Canal Treatment Using Different Obturation Techniques: A Clinical Study

OBJECTIVE

To evaluate the clinical outcome of root canal treatment by obturation technique, root canal filling quality, and tooth- and patient-related variables.

METHODS

This clinical study investigated the endodontic outcome of 114 teeth treated between the years 2009 and 2012. Three different obturation methods were used: (1) adhesive obturation using the continuous wave of condensation technique with Resilon® (CWR), (2) matching-taper single-cone technique with gutta-percha and AH Plus® (SCGP), and (3) matching-taper single-cone technique with gutta-percha and GuttaFlow® (SCGF). Pre- and postoperative periapical radiographs were performed to detect the presence of endodontic lesions (PAI classification) and to assess the quality of both the obturation and the restoration. Tooth- and patient-related data were collected.

RESULTS

The overall endodontic success rate was 75.4% after a mean observation period of 6.3 years. There were no significant correlations between the type or overall quality of obturation and the treatment outcome. Teeth with preoperative lesions had the highest odds ratio (factor of 4.98) for endodontic failure. Tooth- and patient-related variables had no significant effect on endodontic outcome.

CONCLUSIONS

The preoperative periapical status of teeth requiring endodontic treatment was a substantial prognostic factor for endodontic outcome, whereas the type of obturation material or technique did not affect it.

A critical review of the material properties guiding the clinician's choice of root canal sealers

OBJECTIVES

The introduction of hydraulic cement sealers has increased the popularity of single cone obturation where the chemistry and properties of hydraulic cement sealers are crucial. This article has investigated the materials present on the market by reviewing the chemistry aiming at understanding whether these materials are optimized or have been tested appropriately.

METHODOLOGY

A market search on materials called bioceramic and hydraulic sealers was undertaken. The safety data sheet and manufacturer details for every material were searched and the components were checked. The literature was searched for information about the properties of these materials based on their composition.

RESULTS

The safety data sheets and manufacturer details were imprecise with some manufacturers providing little detail on composition. From the publications reviewed, it is apparent that the materials used clinically are not optimized, and there is little evidence that the material chemistry and presentation aid the clinical technique in any way.

CONCLUSIONS

There has been a rapid increase in materials identifying as bioceramics on the market. These materials have diverse chemistries, and some of the constituents are not declared. This may affect the clinical performance of these materials.

CLINICAL SIGNIFICANCE

Smart materials developed on the clinical need which are appropriately tested are necessary for a paradigm shift in root canal obturation. It is important to use reputable materials that have been adequately researched in clinical practice.

Factors that affect the outcomes of root canal treatment and retreatment-A reframing of the principles

This paper undertakes a broad and comprehensive synthesis of relevant clinical, biological, biomechanical, technical and healthcare services data to understand the factors affecting outcomes of periapical healing after root canal (re)treatment. The medical and dental evidence-based era (1980-present) is contextualized with the earlier evidence drive in endodontics (1911-1940) triggered by the focal infection era. The current evidence-based approach has a sharper focus on evidence quality and derivation of practice guidelines. Contrary views question whether guideline-driven, or expertise-development-driven endeavours would best serve outcome improvement in society. The endodontic discipline functions in a broad healthcare framework and sustains industrial, economic and trend pressures that may be deemed to influence outcomes. The nature of root canal treatment and the challenges in determining the factors that affect its outcomes is discussed. The factors potentially affecting periapical healing after root canal treatment are classified into pre-operative, intra-operative and postoperative groups. These categories subsume multiple elements with interactive influences, creating a complex picture, further confounded by some apparently surprising, counter-intuitive and contradictory findings. The technical versus biological conundrum in root canal treatment continues to cause cognitive dissonance. However, due reflection and cross-discipline-synthesis resolve the apparent data conflicts into a very simple, consistent and plausible picture of how root canal treatment works and the key factors that affect periapical healing. Root canal retreatment is considered mainly in the context of its differences from primary treatment as the majority of factors influencing outcomes are common to both. The exceptional difference is that retreatments have a proportionately reduced probability of healing by virtue of compromised apical root canal ramification access or modified host/infection interactions. Root canal (re)treatment outcomes are dominantly influenced by the nature of prior dynamic host/infection interaction (pre-operative patient factors) and how the direction of this dynamic is influenced by two factors: (1) the active efficacy of the operators' root canal treatment protocol to sustain a microbial ecological shift (intra-operative treatment factors) and dampen periapical inflammation; and (2) the passive ability of the functional tooth (and its restoration margin) to maintain its integrity to resist infection reversal (postoperative restorative factors).

Biological Evaluation of the Effect of Root Canal Sealers Using a Rat Model

Gutta-percha points and root canal sealers have been used for decades in endodontics for root canal obturation. With techniques such as single cone methods, the amount of sealer is larger, making their properties more critical. However, relatively few reports have comprehensively evaluated their biological effects. To this end, we evaluated three types of sealers, zinc oxide-fatty acid-, bio-glass- and methacrylate resin-containing sealers were considered. Their biological effects were evaluated using a rat subcutaneous implantation model. Each sealer was loaded inside a Teflon tube and implanted subcutaneously in the backs of rats. Inflammatory cells were observed around all samples 7 days after implantation and reduced after 28 days. Our results revealed that all samples were in contact with the subcutaneous tissue surrounding the sealer. Additionally, Ca and P accumulation was observed in only the bio-glass-containing sealer. Furthermore, each of the three sealers exhibited unique immune and inflammatory modulatory effects. In particular, bio-glass and methacrylate resin sealers were found to induce variable gene expression in adjacent subcutaneous tissues related to angiogenesis, wound healing, muscle tissue, and surrounding subcutaneous tissue. These results may help to understand the biological impacts of root canal sealers on surrounding biological tissues, guiding future research and comparisons with new generations of materials.

The Influence of the Matrix on the Apatite-Forming Ability of Calcium Containing Polydimethylsiloxane-Based Cements for Endodontics

This study aimed to characterize the chemical properties and bioactivity of an endodontic sealer (GuttaFlow Bioseal) based on polydimethylsiloxane (PDMS) and containing a calcium bioglass as a doping agent. Commercial PDMS-based cement free from calcium bioglass (GuttaFlow 2 and RoekoSeal) were characterized for comparison as well as GuttaFlow 2 doped with dicalcium phosphate dihydrate, hydroxyapatite, or a tricalcium silicate-based cement. IR and Raman analyses were performed on fresh materials as well as after aging tests in Hank’s Balanced Salt Solution (28 d, 37 °C). Under these conditions, the strengthening of the 970 cm−1 Raman band and the appearance of the IR components at 1455−1414, 1015, 868, and 600−559 cm−1 revealed the deposition of B-type carbonated apatite. The Raman I970/I638 and IR A1010/A1258 ratios (markers of apatite-forming ability) showed that bioactivity decreased along with the series: GuttaFlow Bioseal > GuttaFlow 2 > RoekoSeal. The PDMS matrix played a relevant role in bioactivity; in GuttaFlow 2, the crosslinking degree was favorable for Ca2+ adsorption/complexation and the formation of a thin calcium phosphate layer. In the less crosslinked RoekoSeal, such processes did not occur. The doped cements showed bioactivity higher than GuttaFlow 2, suggesting that the particles of the mineralizing agents are spontaneously exposed on the cement surface, although the hydrophobicity of the PDMS matrix slowed down apatite deposition. Relevant properties in the endodontic practice (i.e., setting time, radiopacity, apatite-forming ability) were related to material composition and the crosslinking degree.

Micro-CT assessment of gap-containing areas along the gutta-percha-sealer interface in oval-shaped canals

AIM

To assess the interfacial adaptation (gap-containing areas) of two root canal sealers (EndoSequence BC Sealer and AH Plus) to a conventional gutta-percha (GP) cone (GP-sealer interface) in oval-shaped canals filled using the single cone technique.

METHODOLOGY

Sixteen teeth with oval-shaped canals were selected, scanned in a micro-computed tomographic device, and pair-matched according to the volume, aspect ratio and configuration of root canals. Root canals were then sequentially prepared with WaveOne Gold Primary and Large instruments, followed by filling with WaveOne Large GP points associated with either the premixed calcium-silicate EndoSequence BC Sealer or the epoxy resin-based AH Plus sealer (n = 8 per group) using the single cone technique. After 7 days stored in phosphate-buffered saline solution at 37°C, the specimens were rescanned and the reconstructed images segmented in order to differentiate the filling materials (sealer and GP cone) to the dentine. A total of 453 cross-sectional slices were assessed and categorized according to the presence or absence of gaps at the GP-sealer interface. Mann-Whitney U-test verified the differences between groups and were considered significant at alpha = 5%.

RESULTS

Gaps were non-homogenously distributed in two-dimensional axial cross-section images and none of the specimens showed completely gap-free areas along the entire GP-sealer interface. Root canals filled with EndoSequence BC Sealer and AH Plus displayed 171 (37.75%) and 136 (30.02%) slices with gaps in the GP-sealer interface and these frequencies were statistically significant (p = .000).

CONCLUSIONS

Although none of the specimens had a gap-free area along the entire GP-sealer interface, oval canals filled with AH Plus showed less gaps than the ones filled with EndoSequence BC Sealer.

A critical analysis of research methods and experimental models to study root canal fillings

Canal filling materials and techniques have been one of the most studied topics in Endodontics. A simple search using the mesh term "root canal filling" in PubMed revealed more than 11,000 articles, an impressive number that is much higher than "root canal disinfection" (5,544 articles) or even the popular "root canal preparation" (8,527 articles). The overriding importance attributed to root filling procedures is not merely intuitive. It derived from the appealing relevance given by the appearance of the white lines in common radiographs grounded on retrospective clinical data that had identified the quality of a root filling as one of the major causes of treatment failure (lack of healing). Since the publication of the Washington study, impressive efforts have been made for the release of new materials and techniques, as well as, for the development of a plethora of laboratory methods to assess the quality of root filling procedures. This narrative review aims to address and discuss the most relevant laboratory methods to assess the root canal filling. Since filling quality improvements have not translated into higher success rates, as reported in longitudinal clinical studies, more than to deliver a simple methodology-based review, this paper aims to present an in-depth critical view on the assessment of laboratory methods used to study the filling materials and techniques. Recent data indicate that the long-term dimensional stability/degradation over time of endodontic sealers plays a central role in the treatment outcome. In this context, laboratory methods should be developed focusing on predicting, at least to some degree, the long-term clinical behaviour of root canal fillings, rather than simply ranking different materials or techniques.

Development Strategy of Endodontic Filling Materials Based on Engineering and Medical Approaches

This article is a literature review aimed at presenting the general state of knowledge in manufacturing engineering and materials engineering to develop engineering materials applied for endodontic treatment as filling materials. Particular attention was paid to theoretical analyses concerning the selection of methods for developing and obturating root canals and discussing the results of experimental studies available in the literature. These activities aimed to compare the importance of the most commonly used endodontic filling materials based on gutta-percha or polymeric polyester materials, commonly known as resilon, respectively. The motivation to take up this complex, multi-faceted topic in this paper is the extent of caries, periodontal disease, and other oral diseases in 3 to 5 billion people, often affecting toothlessness and contributing to an increase in the index of disability-adjusted life years (number). Endodontics is an important element of the authors’ concept of Dentistry Sustainable Development (DSD) > 2020. The principles of qualifying patients for endodontic treatment are discussed. The introduction of rotary tools, especially manufactured from Nitinol alloy, to develop root canals and the latest thermohydraulic and condensation techniques for obturation guarantee progress in endodontics. The “Digital Twins” methodology was used, rooted in the idea of Industry 4.0 and the resulting idea of Dentistry 4.0, as well as knowledge management methods, to perform experimental research in virtual space, concerning methods of developing and obturating the root canal and assessing the tightness of fillings. Microscopic visualization methods were also used. Significant factors determining the effectiveness of endodontic obturation are the selection of the filling material and the appropriate obturation method. The generalized dendrological matrix of endodontic filling materials considers the criteria of mechanical strength influencing the potential root fracture and the quality of root canal filling. The results of the SWOT point analysis (strengths and weaknesses, opportunities, threats) were also compared. For both filling materials, the weaknesses are much less than the strengths, while the threats are slightly less than the opportunities for the gutta-percha-based material, while for resilon the opportunities are much smaller than the threats. It requires the application of an appropriate development strategy, i.e., MAXI-MAXI in the case of a filling material based on gutta-percha and MAXI-MINI in the case of resilon. Therefore, the analysis of these experimental data does not indicate the real competitiveness of resilon for the gutta-percha-based material. This material deservedly maintains its strong position as the “Gold Standard of Endodontics”.

What Are the Chances of Resilon to Dominate the Market Filling Materials for Endodontics?

This paper is a literature review with additional virtual analyses of the authors’ own experimental research results. Knowledge from various areas was synergistically combined, appropriately for concurrent engineering, presenting several possible methodological approaches used in research, optimizing the selection of engineering materials and the conditions of their application with particular application in endodontics. Particular attention was paid to the theoretical aspects of filling material strengths, weaknesses, opportunities, and threats SWOT analysis. Attention was paid to the original concepts of Sustainable Dentistry Development in conjunction with Dentistry 4.0, which includes endodontics as an important element. The dentists’ actions, among others, in conservative dentistry, along with endodontics, requires close cooperation with engineers and the enginering sciences. Methods of root canal preparation were described, together with selected tools, including those made of nitinol. Principles concerning the process of cleaning and shaping the pulp complex are presented. The importance of obturation methods, including the Thermo-Hydraulic-Condensation THC technique, and the selection of filling materials with the necessary sealants for the success of endodontic treatment are discussed. The experimental studies were carried out in vitro on human teeth removed for medical reasons, except for caries, for which two groups of 16 teeth were separated. After the root canal was prepared, it was filled with studs and pellets of a filling material based on polyester materials, which has gained the common trade name of resilon or, less frequently, RealSeal (SybronEndo) with an epiphany sealant. The teeth for the first group were obturated by cold lateral condensation. In the second case the obturation was performed using the Thermo-Hydraulic-Condensation technique using System B and Obtura III. The experimental leakage testing was done using a scanning electron microscope SEM and a light stereoscopic microscope LSM, as typical research tools used in materialography. The research results, in a confrontation with the data taken from the literature studies, do not indicate the domination of resilon in endodontics.

Critical analysis of research methods and experimental models to study removal of root filling materials

Despite enjoying high favourable outcome rates, root canal treatment is not always successful. Root canal retreatment is a widely practised option for managing a non-healing root treated tooth. A basic distinction between retreatment and initial treatment is the requirement to remove the existing root filling material occupying the root canal space. Only then, can the technical deficiencies and possible causes of failure be addressed. Hence, the successful removal of the root filling material is critical to achieving the objectives of retreatment. Many different materials and techniques have been used for root canal filling, which have been documented in a plethora of studies; these are mainly laboratory studies investigating the removal of root filling materials. To help guide future research, which may then better inform clinical practice in relation to retreatment procedures, the focus of this narrative review is on the research methods and experimental models employed to study the removal of root filling materials. The current available literature demonstrates great variation in the research methodologies used to study the removal of root filling material, including direct visualization by splitting tooth samples or clearing, three-dimensional radiographic imaging including using microcomputed tomography or cone-beam computed tomography, and a combination of these techniques. Depending on the research method employed, variation also exists in quantification of root filling material removal; these include measurements of surface area, volume or weight, and criteria-based (semi-quantitative) assessment. Experimental models, using human teeth or resin models, differ with respect to standardization techniques and replication of the clinical scenario including initial sample preparation, canal filling, allocation and technical aspects of retreatment procedures. Future models should replicate, as closely as possible, the clinical scenario. Currently, microcomputed tomography provides a highly detailed, non-invasive and non-destructive method of objectively assessing and quantifying root filling removal.

Virtual Approach to the Comparative Analysis of Biomaterials Used in Endodontic Treatment

The importance of endodontics is presented within our own concept of Dentistry Sustainable Development (DSD) consisting of three inseparable elements; i.e., Advanced Interventionist Dentistry 4.0 (AID 4.0), Global Dental Prevention (GDP), and the Dentistry Safety System (DSS) as a polemic, with the hypothesis of the need to abandon interventionist dentistry in favour of the domination of dental prevention. In view of the numerous systemic complications of caries that affect 3−5 billion people globally, endodontic treatment effectively counteracts them. Regardless of this, the prevention of oral diseases should be developed very widely, and in many countries dental care should reach the poorest sections of society. The materials and methods of clinical management in endodontic procedures are characterized. The progress in the field of filling materials and techniques for the development and obturation of root canals is presented. The endodontics market is forecast to reach USD 2.1 billion in 2026, with a CAGR of 4.1%. The most widely used and recognized material for filling root canals is gutta-percha, recognized as the “gold standard”. An alternative is a synthetic thermoplastic filler material based on polyester materials, known mainly under the trade name Resilon. There are still sceptical opinions about the need to replace gutta-percha with this synthetic material, and many dentists still believe that this material cannot compete with gutta-percha. The results of studies carried out so far do not allow for the formulation of a substantively and ethically unambiguous view that gutta-percha should be replaced with another material. There is still insufficient clinical evidence to formulate firm opinions in this regard. In essence, materials and technologies used in endodontics do not differ from other groups of materials, which justifies using material engineering methodology for their research. Therefore, a detailed methodological approach is presented to objectify the assessment of endodontic treatment. Theoretical analysis was carried out using the methods of procedural benchmarking and comparative analysis with the use of contextual matrices to virtually optimize the selection of materials, techniques for the development and obturation of root canals, and methods for assessing the effectiveness of filling, which methods are usually used, e.g., in management science, and especially in foresight research as part of knowledge management. The results of these analyses are presented in the form of appropriate context matrices. The full usefulness of the research on the effectiveness and tightness of root canal filling using scanning electron microscopy is indicated. The analysis results are a practical application of the so-called “digital twins” approach concerning the virtual comparative analysis of biomaterials used in endodontic treatment.

Percentage of Gutta-Percha-, Sealer-, and Void-Filled Areas in Oval-Shaped Root Canals Obturated with Different Filling Techniques: A Confocal Laser Scanning Microscopy Study

Objective  This study compared different obturation techniques, analyzing percentage of areas filled with gutta-percha, sealer, and voids (PGFA, PSFA, and PVFA, respectively) in oval-shaped root canals.

Materials and Methods  A total of 60 extracted human mandibular central incisors were decoronated, instrumented, and irrigated using the same protocol. After drying, the root canal was filled with AH Plus labeled with 0.1% rhodamine B dye using a Lentulo spiral. The filling procedure was performed by dividing the teeth into four groups according to the respective technique: G1, cold lateral condensation; G2, continuous wave of condensation; G3, modified cold lateral condensation using an F3 master cone; and G4, modified continuous wave of condensation using an ISO (International Organization for Standardization) sized 30 gutta-percha cone. Then, slices measuring 1.5 mm in thickness were obtained 3 and 6 mm from the apex and evaluated by confocal laser scanning microscopy to determine PGFA, PSFA, and PVFA.

Statistical Analysis  The data were analyzed statistically with analysis of variance and Games-Howell’s tests ( p = 0.05).

Results  The groups showed no significant differences in the apical third (3 mm from the apex). In the middle third (6 mm from the apex), G3 and G1 showed higher PGFA and PVFA, respectively. G3 showed lower PSFA than G2 and G4. Both cold techniques (G1 and G3) promoted lower PSFA than both warm techniques (G2 and G4).

Conclusions  Notwithstanding the limitations of this in vitro study, PGFA, PSFA, and PVFA ranged significantly only in the middle third, as observed by the different filling techniques. Higher PGFA and PVFA values were obtained for G3 and G1, respectively. Both cold techniques promoted lower PSFA than both warm techniques.

Antimicrobial and ultrastructural properties of root canal filling materials exposed to bacterial challenge

INTRODUCTION

Chemo-mechanical preparation of the root canal leaves behind viable bacteria which can lead to treatment failure. Materials used inside the root canal should possess antimicrobial properties and also resist disintegration in the presence of biofilm.

METHODS

Gutta-percha, three root canal sealers (Pulp Canal Sealer, AH Plus and BioRoot RCS) and materials used to make posts (a metal and a resin) were evaluated. Their antimicrobial activity against Enterococcus faecalis in direct contact was assessed by scanning electron microscopy and live-dead staining using confocal microscopy over a period of eight weeks. The materials' structural integrity was assessed by scanning electron microscopy.

RESULTS

The antimicrobial activity of the materials varied. The metal alloy posts as well as BioRoot RCS sealer did not allow any biofilm accumulation; but gutta-percha, Pulp Canal Sealer and resin from fibre-reinforced posts encouraged thick biofilm accumulation. Microstructural changes were observed in AH Plus (washout) and BioRoot (crystal deposition) in contact with biofilm. The Pulp Canal and BioRoot RCS sealers exhibited a modified ion leaching pattern in contact with microbially loaded media.

CONCLUSIONS

The microbial challenge affected the material microstructure in some of the materials tested and allowed biofilm accumulation. Although clinical success depends on a number of factors, materials that are structurally sound and exhibit antimicrobial properties are preferable for endodontic therapy and tooth restoration involving entry in the root canal.