Matching the Dimensions of Currently Available Instruments with the Apical Diameters of Mandibular Molar Mesial Root Canals Obtained by Micro–computed Tomography

Disinfectant effectiveness of chlorhexidine gel compared to sodium hypochlorite: a systematic review with meta-analysis

This study aimed to compare the disinfectant ability of chlorhexidine (CHX) gel and sodium hypochlorite (NaOCl). Systematic searches were conducted from inception until December 8th, 2022 (MEDLINE/PubMed, Cochrane Library, Web of Science, Scopus, Embase, and Grey Literature databases). Only randomized clinical trials were included. The revised Cochrane risk of bias tools for randomized trials were used to assess the quality of studies. Meta-analyses were performed. The overall quality of evidence was assessed through the Grading of Recommendations Assessment, Development, and Evaluation tool. Six studies were included. Five had a low risk of bias and 1 had some concerns. Three studies assessed bacterial reduction. Two were included in the meta-analysis for bacterial reduction (mean difference, 75.03 [confidence interval, CI, -271.15, 421.22], p = 0.67; I2 = 74%); and 3 in the meta-analysis for cultivable bacteria after chemomechanical preparation (odds ratio, 1.03 [CI, 0.20, 5.31], P = 0.98; I2 = 49%). Five studies assessed endotoxin reduction. Three were included in a meta-analysis (mean difference, 20.59 [CI, -36.41, 77.59], p = 0.48; I2 = 74%). There seems to be no difference in the disinfectant ability of CHX gel and NaOCl, but further research is necessary.

Shaping ability of Procodile and R6 Reziflow nickel-titanium reciprocating instruments in curved mesial root canals of mandibular molars: A MicroCT study

To compare the shaping ability of Procodile and R6 Reziflow instruments used in reciprocating motion in severely curved root canals, assessed with micro-computed tomography (μCT). Fourteen extracted human mandibular first molars were randomly assigned to two instrumentation techniques (n = 14 mesial root canals): Procodile or R6 Reziflow. For both groups, root canals were prepared to the working length up to a size 25, .06 taper. Molars were virtually divided into apical, middle and coronal thirds and μCT was used to scan all samples pre- and post-root canal. Canal transportation, centring ability, volume, surface area and unprepared area were evaluated. Geometrical parameter changes were compared with preoperative values (one-way analyses of variance and Tukey multiple comparison post-hoc test) between groups and Student t-test within groups (α = 0.05) Significantly less transportation was observed associated with the Procodile technique in the molar's coronal third compared to the R6 Reziflow technique (p < .05). No significant differences in root canal centring ability, volume, surface area and unprepared area were observed. Procodile showed a lower percentage increase of surface area compared to R6 Reziflow (p < .05). The Procodile and R6 Reziflow techniques applied to first molar root canal performed similarly except for the less transportation observed in the coronal third using Procodile. RESEARCH HIGHLIGHTS: MicroCT analysis of canal geometry before and after instrumentation revealed that Procodile and R6 Reziflow showed a similar shaping ability to shape curved root canals without substantially modifications of the original tooth anatomy.

Clinical determination of anatomical diameter in different dental groups correlating them with gender, age, tooth/canal and pulpoperiradicular diagnosis: an observational clinical study

The aim of this observational clinical study (OCS) was to determine the clinical anatomical diameter (CAD) in several dental groups, thus correlating them with gender, age, tooth/canal and pulpoperiradicular diagnosis. Three-hundred fifty-nine teeth/584 vital or necrotic root canals from patients of both genders and different ages composed the sample. After performing the necessary previous procedures, K-Flexofiles were used to determine the CAD. Then, the gender and age of the patients, as well as the pulpoperiradicular diagnosis of the teeth were tabulated to conduct the statistical analysis (p < 0.05). Of the 359 teeth/584 root canals evaluated, 208/342 were from women (mean age 38.85 ± 13.42 years) and 151/242 were from men (mean age 45.41 ± 14.90 years). Statistically significant differences between the CAD means of root canals from women and men were not identified (p = 0.411). The analysis of the correlation between the CAD and age also showed a total independence (p = 0.271). Teeth with pulp necrosis and asymptomatic apical periodontitis diagnosed radiographically (TPNAAPDR) had a significantly larger CAD mean than teeth with pulp necrosis and no asymptomatic apical periodontitis diagnosed radiographically (TPNNAAPDR) and teeth with vital pulp and normal apical tissues (TVPNAT) (p = 0.0297); and the last two did not differ statistically (p > 0.05). The largest CAD mean was observed in single canals of maxillary central incisors. The lowest values of this variable were identified in the mesiobuccal and mesial canals of maxillary and mandibular first molars, respectively. The CAD of the root canals was influenced only by the root canal/tooth and pulpoperiradicular diagnosis.

Disinfection and Shaping of Vertucci Class II Root Canals after Preparation with Two Instrument Systems and Supplementary Ultrasonic Activation of Sodium Hypochlorite

INTRODUCTION

This study compared disinfection and shaping after root canal preparation with either XP-endo Shaper or TruNatomy instrument systems, supplemented by ultrasonic activation of sodium hypochlorite (NaOCl) with either stainless-steel (SS) or nickel-titanium (NiTi) inserts.

METHODS

Mesial roots from mandibular molars with Vertucci class II configuration were divided into 2 groups (n = 24) based on anatomically paired micro-computed tomography (micro-CT) analyses. Pre and postpreparation micro-CT scans were obtained to evaluate the shaping performance. The canals were contaminated with a mixed bacterial culture for 30 days and then subjected to preparation with either XP-endo Shaper or TruNatomy instruments using NaOCl irrigation. Supplementary ultrasonic activation of NaOCl was conducted using either an SS (TruNatomy group) or NiTi (XP-endo Shaper group) insert. Bacteriological samples were taken from the canals before preparation (S1), after preparation (S2), and after the supplementary approach (S3). Bacterial reduction was evaluated using a quantitative real-time polymerase chain reaction.

RESULTS

Preparation with both instrument systems significantly reduced bacterial counts (P < .01). After preparation, 36% (TruNatomy) and 35% (XP-endo Shaper) were negative for bacteria. These values increased to 59% and 65% after ultrasonic activation with the SS and NiTi inserts, respectively. The quantitative data in S2 showed that XP-endo Shaper promoted a significantly higher bacterial reduction than TruNatomy (P < .05). No significant intragroup differences were observed after ultrasonic activation (P > .05), probably because the SS insert promoted a significantly higher S2-to-S3 reduction than the NiTi insert (P < .01). Micro-CT analysis revealed no significant differences in the unprepared areas between the groups (P > .05).

CONCLUSIONS

The XP-endo Shaper caused a significantly higher bacterial reduction than TruNatomy in Vertucci class II canals. Better antibacterial results after ultrasonic activation were observed for the SS ultrasonic inserts than for the NiTi inserts.

Tip and taper compatibility of accessory gutta-percha points with rotary and reciprocating instruments

Objectives

This study was conducted to evaluate and compare the tip and taper compatibility of accessory gutta-percha points (AGPs) with various rotary and reciprocating instruments.

Materials and Methods

Using a profile analyzer, tip and taper measurements were taken of 10 AGPs of each of the 14 models available from Odous de Deus and the 4 models available from Dentsply-Maillefer. Diameter measurements were taken at 1-mm intervals, from 3 mm from the tip (D3) to 16 mm.

Results

Based on the mean values obtained, 3-dimensional (3D) models of the AGPs were drawn in Autodesk Fusion 360 and superimposed on 3D models of each instrument selected (Mtwo, Reciproc, RaCe, K3, and ProDesign Logic) to determine the compatibility between the instrument and the AGP. Data corresponding to the tips and tapers of the various AGPs, as well as the tip and taper differences between the AGPs and the instruments, were analyzed using descriptive statistics. The tapers of the AGPs were subject to the American National Standards Institute/American Dental Association No. 57 standard. The Odous de Deus extra-long medium and extra-long extra-medium AGPs were shown to be compatible with Mtwo, K3, and ProDesign Logic instruments with taper 0.06 and tip sizes 25 and 30, while the Dentsply fine and fine medium cones were compatible with Mtwo, RaCe, and K3 instruments with conicity of 0.04 and tip sizes 35 and 40.

Conclusions

Both the Odous de Deus and Dentsply commercial brands included 2 AGP models with tip (D3) and taper compatibility with Mtwo, RaCe, K3, and/or Prodesign Logic instruments.

Sonic irrigation for removal of calcium hydroxide in the apical root canal: A micro-CT and light-coupled tracking analysis

Objective

This study aimed to evaluate the efficacy of three sonic irrigation systems for removal of calcium hydroxide dressing from the apical root canal.

Materials and methods

A total of 96 single-rooted teeth in three categories of root canal curvatures (straight: 0–5°, moderate: 6–20°, and severe: > 20°) were allocated to four groups: conventional needle irrigation, EndoActivator, EQ-S, and Vibringe. The root canals were instrumented using Protaper NEXT and filled with calcium hydroxide. After removal of calcium hydroxide, the remaining volume of calcium hydroxide was measured by micro-CT analysis. Data were compared among root canal curvatures and irrigation systems using the Kruskal-Wallis test and Mann-Whitney test (p < .05). The oscillating range of each irrigation system was measured using light-coupled motion tracking.

Results

The volumes of calcium hydroxide remaining in the canals with severe curvature were significantly higher than in those of straight curvature (p < .05). In the canals of moderate or severe curvature, EQ-S showed the highest removal percentage, followed by EndoActivator, Vibringe, and needle irrigation (p < .05). Light-coupled tracking showed the largest oscillating range in EQ-S (p < .05).

Conclusions

Sonically activated irrigation systems with a flexible tip can be beneficial for calcium hydroxide intracanal dressing removal in the curved apical canals.

Planned Apical Preparation Using Cone-Beam Computed Tomographic Measures: A Micro-Computed Tomographic Proof of Concept in Human Cadavers

INTRODUCTION

This study assessed the amount of unprepared surface areas at the apical 4-mm segment of the root canal after a planned preparation based on cone-beam computed tomography (CBCT) measurements.

METHODS

Eighteen posterior mandible segments were obtained from cadavers and scanned using CBCT and micro-computed tomographic (micro-CT) imaging. CBCT images were used to measure the largest initial canal diameter from 29 root canals of premolars at 1, 2, 3, and 4 mm short of the apical foramen. Each measurement was used to select a master apical instrument with size/taper that was 1 diameter larger to prepare the apical 4 mm of each particular root canal. A post-preparation micro-CT scan was obtained, and the unprepared canal areas were calculated.

RESULTS

A very high amount of surface areas over the apical 4 mm of the root canal was included in the final preparation (mean >90%). The unprepared areas ranged from as low as 3.7% to a maximum of 14.6% (mean and median, 9.2% and 9.1%, respectively).

CONCLUSIONS

The proposed planned apical root canal preparation resulted in optimized root canal shaping with a substantial amount of prepared surface areas. The protocol used also resulted in a conservative canal enlargement using final instruments that were 1 size larger than the initial largest canal diameter.

Influence of access cavity preparation on the dentine thickness of mesial canals of mandibular molars prepared with reciprocating instruments

AIM

To evaluate the influence of traditional and conservative access cavity preparations on the remaining dentine thickness in the coronal third of mesial canals of extracted mandibular molars prepared with reciprocating instruments using micro-computed tomography as the analytical tool.

METHODOLOGY

Seventy extracted mandibular molars were scanned at a pixel size of 19 μm. From this initial sample, 20 teeth were selected, pair-matched and distributed into two groups (n = 10) according to the access cavity preparation: traditional (TradAC) or conservative (ConsAC). The root canals were sequentially enlarged with Reciproc Blue R25 (size 25, 0.08v taper) and R40 (size 40, 0.06v taper) instruments. A new scan was performed and the postoperative stacks were coregistered with their respective preoperative datasets. A colour-coded cross sections of the roots were created and used to identify and measure the smallest dentine thickness related to both MB and ML canals at 1.0-mm intervals from the furcation level of up to 5 mm in the apical direction, in both mesial and distal aspects of the roots, before and after preparation. The statistical analyses were performed with paired-samples t-test, independent-samples Student T-test and Chi-Square test with a significance level of 5%.

RESULTS

At all levels of both groups, dentine thickness before preparation was greater than after preparation (p < .05). No difference in the percentage of dentine reduction was observed between TradAC and ConsAC groups (p > .05), but a significantly greater reduction was observed to the distal aspect of the roots (p < .05). After root canal preparation, dentine thinner than 0.5 mm was observed mostly along the distal aspect of the root (10% to 15%) of the MB and ML canals, with no influence of the access cavity type on its incidence to either mesial (X²  = 1.66; p = .2) or distal (X²  = 0.40; p = .5) directions. In the TradAC group, dentine thickness in most slices was greater than 1.0 mm after preparation (n = 124) whilst, in the ConsAC, it ranged from 0.5 to 1.0 mm (n = 136).

CONCLUSION

Traditional or conservative access cavity preparation in extracted mandibular molars did not influence the remaining dentine thickness in the coronal third of mesial canals enlarged with thermomechanically treated nickel-titanium reciprocating instruments.