Effect of Ultrasonic Activation of Endodontic Sealers on Intratubular Penetration and Bond Strength to Root Dentin

Effect of radiotherapy, immediate dentin sealing and irrigation simulating single- or two-visits endodontic treatment on the bond strength to pulp chamber dentin: an in vitro study

This study aimed to evaluate the influence of radiotherapy and different endodontic treatment protocols on the bond strength to pulp chamber dentin. Eighty mandibular molars were randomly divided into two groups (n = 40): non-irradiated and irradiated (60 Gy). The pulp chambers were sectioned, and each group was subdivided (n = 8), according to the endodontic treatment protocol: no treatment (Control); Single-visit; Two-visits; Immediate dentin sealing (IDS) + single-visit; and IDS + two-visits. Each endodontic treatment visit was simulated through irrigation with 2.5% NaOCl, 17% EDTA and distilled water. IDS was performed by actively applying two coats of a universal adhesive to the lateral walls of the pulp chamber. After, the pulp chambers were restored with resin composite and four sticks were obtained for microtensile test. In addition, the dentin of the pulp chamber roof was assessed for surface roughness, chemical composition, and topography after each treatment protocol. Two-way ANOVA, Tukey's post hoc, Mann-Whitney, Kruskal-Wallis and Dunn's post hoc were performed (α = 5%). The treatment protocol affected bond strength (p < 0.05), while the irradiation did not (p > 0.05). The control group presented the highest values (p < 0.05). The single-visit group demonstrated better performance compared to the other groups (p < 0.05), which did not differ from each other (p > 0.05) The use of IDS changed the surface roughness (p < 0.05), chemical composition (p < 0.05) and topography of the dentin. In conclusion, the treatment protocol influenced dentin adhesion, while irradiation did not.

Ultrasonic activation of adhesive systems increases bond strength and intratubular penetration of resin cement in root dentin subjected to radiation therapy

OBJECTIVE

This study aimed to evaluate the effect of ultrasonic activation of etch-and-rinse and self-etch adhesive systems on the bond strength of resin cement to irradiated root dentin.

MATERIALS AND METHODS

Eighty human maxillary anterior teeth were distributed into 8 groups (n = 10), according to the type of adhesive system used (etch-and-rinse and self-etch), the ultrasonic activation of the adhesive systems, and the dentin condition (irradiated or non-irradiated - 70 Gy). Endodontic treatment was performed followed by fiberglass post-space preparation. After fiberglass posts' luting, the roots were transversely sectioned on dentin discs and submitted to the push-out bond strength test (0.5 mm/min). The fractured specimens were analyzed under a stereomicroscope and Scanning Electron Microscope (SEM) for failure mode classification. One of the dentin discs was analyzed under SEM to evaluate the characteristics of the adhesive interface.

RESULTS

Irradiated specimens had lower bond strength than non-irradiated specimens (P < 0.0001). Ultrasonic activation of both adhesive systems increased the bond strength of the resin cement to irradiated dentin (P < 0.0001). Radiotherapy significantly affected the failure mode in the middle (P = 0.024) and apical thirds (P = 0.032) (adhesive failure).

CONCLUSION

Non-irradiated specimens had a more homogeneous adhesive interface. When ultrasonically activated, both adhesive systems showed a greater number of resinous tags, regardless of the dentin condition.

CLINICAL RELEVANCE

Ultrasonic activation of adhesive systems is a feasible strategy to enhance fiberglass posts retention in oncological patients.

Evaluation of various obturation techniques with bioceramic sealers in 3D-printed C-shaped canals

This in vitro study compared various obturation techniques with bioceramic sealers for filling C-shaped 3D-printed replicas. A mandibular molar with a C-shaped root canal with a C1 configuration was obtained. After instrumenting with M3 Pro Gold files (United Dental, Shanghai, China) up to size #30/0.04, a CBCT scan of the tooth was taken. Sixty 3D-printed replicas of the tooth were created. The samples were obturated with EndoSeal TCS sealer (E. TCS; Maruchi, Wonju, Korea) or EndoSeal MTA (E. MTA; Maruchi, Wonju, Korea) (n = 30). The samples in each group were obturated with the following techniques (n = 10): (1) single-cone technique (SC), (2) SC with ultrasonic activation (UA), and (3) cold hydraulic compaction (CHC). Following incubation, the replicas' apical, middle, and coronal thirds were inspected under a digital microscope, and the proportion of filling material and void were calculated. Also, the obturation time and sealer extrusion were recorded. Data were analyzed using ANOVA, LSD post-hoc, and the chi-square tests (α = 0.05). The results indicated that in the apical third, E. TCS-SC, E. TCS-UA, and E. MTA-UA had the lowest void percentage among groups (p < 0.05). In the middle thirds, samples obturated with E. TCS-UA showed a significantly lower void percentage among all groups (p < 0.05). However, in the coronal third, E. TCS-CHC showed the least void percentage (p < 0.05), followed by E. TCS-UA and E. MTA-CHC. The E. TCS-SC and E. TCS-UA were the least time-consuming methods (p < 0.05). Sealer extrusion significantly differed among the groups, with E. MTA-UA and E. TCS-UA showing higher incidence (p = 0.019). It was concluded that E. TCS-UA was the most convenient obturation technique. However, care must be taken when obturating the canals with high flow and ultrasonic activation near the vital anatomical landmarks.

The use of sonic and ultrasonic activation of endodontic sealer to improve sealer filling quality in the root canal: a scoping review

This scoping review aimed to map whether the use of sonic and ultrasonic methods to activate the endodontic sealer improves the sealer filling quality in the root canal, considering the bond strength and intratubular penetration to the root dentin as evaluation criteria. The study protocol was prospectively registered and is available online ( https://osf.io/x5fma/ ). Reporting was based on PRISMA Extension for Scoping Reviews. The search was performed in Embase, PubMed, Scopus, and Web of Science. We selected studies without time and language restrictions that used sonic or ultrasonic methods to activate endodontic sealer, whose outcomes were bond strength and intratubular penetration. Three researchers independently selected the articles and collected data. Of 1422 articles, 19 were read in full and 13 studies were included. The vast majority of studies opted for direct activation of the endodontic sealer. The most investigated sealers were the epoxy resin-based sealers, and the ultrasonic activation method was the most explored. For the bond strength outcome, there was a trend toward higher values when the sealer was activated ultrasonically, but the findings seem to be divergent. The sonic activation was not effective for its intended purpose. For the outcome of intratubular penetration, the vast majority of studies indicate that the use of sonic and ultrasonic methods to activate the endodontic sealer is capable of increasing intratubular penetration. The use of sonic and ultrasonic methods to directly activate the endodontic sealer can increase the intratubular penetration of the sealer, but their benefits on the bond strength are uncertain.

Influence of bioceramic sealers on dentinal tubule penetration and antimicrobial effectiveness: a systematic review and meta-analysis of in vitro studies

The aim of this systematic review and meta-analysis (SRM) was to evaluate whether bioceramic sealers have better penetration capacity in dentinal tubules and antimicrobial activity when compared to AH Plus® sealer. This SRM was recorded in the Open Science Framework database and followed the guidelines of the PRISMA 2020. Five databases were searched by two independent reviewers. Only in vitro studies that evaluated the effects of bioceramic sealers on dentinal tubule penetration and antimicrobial activity outcomes compared to AH Plus® sealer were included. Meta-analysis was conducted using R software, using the effect measure of the standardized mean difference (SMD) and inverse variance method. A modified Joanna Briggs Institute's Checklist was used for the risk of bias assessment. A total of 1486 studies were identified, and only 54 studies that fulfilled our eligibility criteria were included in this review. There was no statistical difference between the sealers evaluated for dentinal tubule penetration, in the thirds evaluated: coronal SMD 0.58 [0.14; 1.31], p = 0.12; middle SMD 0.07 [0.54; 0.39], p = 0.75; and apical SMD 0.08 [0.73; 0.56], p = 0.80. Both sealers demonstrated similar antimicrobial action (SMD [3.42; 5.32], p = 0.67 and SMD 0.67 [1.89; 0.55], p = 0.28). The studies presented a low risk of bias. Based on the in vitro studies included and according to the limitations of the present review, the data suggest that bioceramic and AH Plus® sealers present similar penetration capacity in dentinal tubules and antimicrobial effect, making them suitable materials to be considered in clinical practice.

Ultrasonic activation of the endodontic sealer enhances its intratubular penetration and bond strength to irradiated root dentin

To evaluate the effect of ultrasonic activation of the endodontic sealer on its intratubular penetration and bond strength to irradiated root dentin. Forty human teeth were distributed into 4 groups (n = 10), according to the radiation therapy (RT) exposure-70 Gy-and ultrasonic activation (UA) of the endodontic sealer: RT/UA-irradiated teeth and sealer UA; RT/no-UA-irradiated teeth and no sealer UA; no-RT/UA-non-irradiated teeth and sealer UA and no-RT/no-UA-non-irradiated teeth and no sealer UA. Push-out bond strength test was performed in a Universal Testing Machine. Failure modes and adhesive interface were analyzed under Scanning Electron Microscopy. The data were statistically compared (two-way-ANOVA and posthoc Games-Howell test; Fisher's exact test - α = 5%). The different experimental conditions (radiation and UA) and the root third had a significant effect on push-out bond strength, and the interaction of these factors was significant (p < 0.05). UA of the sealer significantly increased its bond strength to both irradiated and non-irradiated dentin (p < 0.05). The irradiated groups mostly presented adhesive-type failure of the sealer (p < 0.01). Regardless of the irradiation, the ultrasonically activated groups showed a more homogeneous adhesive interface, with the presence of sealer tags in greater density and depth. Ultrasonic activation enhanced the intratubular penetration and the bond strength of the endodontic sealer to irradiated dentin. The impact of ultrasonic activation of the endodontic sealer on teeth undergoing radiotherapy is a gap in the scientific literature that needs to be bridged.

Comparative Evaluation of Push-out Bond Strength of Three Different Root Canal Sealers: An In Vitro Study

AIM

The aim of this present study was to compare the dislodgement resistance of calcium silicate-based sealer, zinc oxide sealer, and a new sealer combining both zinc oxide and calcium silicate-based sealer in vitro.

MATERIALS AND METHODS

60 single-rooted human teeth were instrumented with F3 Protaper Gold. All endodontic canals were filled using gutta percha cones using the cold lateral condensation technique in combination using one of the mentioned sealers (n = 20 per group). The teeth were divided into three groups: group A consisted of Sealite® Ultra, group B consisted of K-Sealer®, and group C consisted of BioRoot® RC. After 2 months of incubation (37°C, 100% humidity) and after cutting out 2 mm from the most apical portion of the root apex, six slices of 1 mm thickness were generated. Mechanical dislodgement resistance was examined using a universal pressure-testing machine and the push-out bond strength (POBS) was calculated. Specimens were examined under 20× magnification to define the bond failure mode. Statistical analysis was executed using ANOVA, post hoc Turkey test for pairwise comparisons and Kruskal-Wallis tests.

RESULTS

The POBS of BioRoot® was significantly higher than the POBS of the two other sealers with a mean of 10.54 MPa ± 2.10 and 5.73 MPa ± 2.34, respectively (p < 0.001). Sealite® and K-Sealer® showed similar results in the median and coronal part. K-Sealer® revealed highest POBS compared with Sealite® in the apical part (p < 0.05).

CONCLUSION

The POBS of the zinc oxide and calcium silicate-based sealer was significantly lower compared with calcium silicate. Sealite® and K-Sealer® exhibited almost same results. BioRoot showed the highest POBS of all sealers.

CLINICAL SIGNIFICANCE

The current study was needed to evaluate the bond strength of three different cements to dentinal walls, by evaluating their respective POBS in vitro. The findings of this study may provide guidance for the clinician in the selection of an adequate endodontic sealer that guarantees an enhanced adhesive seal between the Gutta-percha and the dentinal canal walls. How to cite this article: Makhlouf MP, El Helou JD, Zogheib CE, et al. Comparative Evaluation of Push-out Bond Strength of Three Different Root Canal Sealers: An In Vitro Study. J Contemp Dent Pract 2024;25(1):15-19.

Comparison of the dentin tubule penetration of AH Plus, WellRoot ST, and MTA BioSeal after obturation, retreatment, and re-shaping of the root canals

It was aimed to compare the dentine tubule penetration of AH Plus, MTA Bioseal, and WellRoot ST after filling, retreating, and reshaping the root canals by using a novel microscopic method. Seventy-five mandibular incisors with single root canals were shaped with Protaper Next system (PTN; X2-25/0.06) The teeth were obturated with AH Plus labeled with Rhodamin B and MTA Bioseal or WellRoot ST sealer which were labeled with Fluo-3. Then the root canal fillings were removed with Protaper Universal Retreatment files. At the last stage, the teeth were reshaped with PTN (X3-30/0.07). The samples were transversally sectioned and examined using a Cytation 5 reader and Gen5 software regarding the mean and the maximum depth of sealer penetration. No significant difference was observed between the groups, except for the 6 mm level after reshaping the root canals (p < .05). It is not possible to completely remove the sealer remnants from the dentin walls even after reshaping the root canals. RESEARCH HIGHLIGHTS: Even after reshaping the root canals in the retreatment procedure, it is not possible to completely remove the filling residues of the epoxy-resin-based, calcium-silicate-based and MTA-based endodontic pastes from the dentin walls.

Effect of different sealer activation techniques on dentinal tubule penetration

The aim of this study was to evaluate the influence of different activation techniques on dentin tubule penetration of root canal sealer. Seventy-five teeth with single canals were chemomechanically prepared. A calcium silicate-based sealer was stained with a fluorescent dye (rhodamine B), placed into the canals and activated according to the following groups: control (no activation), EDDY, EndoActivator, ultrasonic and XP-Endo Finisher. Then, the samples were obturated. The percentages of sealer penetration at various depth levels of root sections were measured with confocal laser scanning microscopy. XP-Endo Finisher presented the highest penetration at 50 μm (p < 0.05). XP-Endo Finisher showed similar penetration with EDDY at 100 and 200 μm (p > 0.05) while presented higher penetration than the other groups (p < 0.05). At 500 μm, XP-Endo Finisher presented higher penetration than EndoActivator (p < 0.05) while similar penetration with the other groups (p > 0.05). XP-Endo Finisher can be recommended for activation during sealer placement for better penetration into dentin tubules.

Effect of ultrasonic agitation on marginal adaptation, intratubular penetration and bonding strength of calcium-silicate-based endodontic sealers: A laboratory study

The effect of ultrasonic activation (UA) on marginal adaptation, intratubular penetration and bond strength provided by three calcium silicate-based sealers was evaluated. Ninety-six distobuccal root canals of maxillary molars were randomly divided into 8 groups (n = 12) according to the sealer and UA application: EndoSequence BC sealer (ESBC), Sealer Plus BC (SPBC) and Bio-C Sealer (BCS), using AH Plus (AH) as a control group. The specimens were sectioned at 2, 4 and 6 mm from the apex. The data were statistically analysed using Kruskall-Wallis, Dunn, Mann-Whitney and chi-squared tests. UA improved the marginal adaptation of ESBC (6 mm), SPBC (all levels), BCS (2/4 mm) and AH (4 mm) (p < 0.05); the bond strength of SBPC (2 mm) and BCS (6 mm) were also improved (p < 0.05). The UA of endodontic silicate-based sealers improved the marginal adaptation in all levels and the bond strength of SBPC and BCS sealer.

Outcomes of Endodontic-Treated Teeth Obturated with Bioceramic Sealers in Combination with Warm Gutta-Percha Obturation Techniques: A Prospective Clinical Study

The objective of this clinical study was to collect short-term endodontic outcomes of endodontic-treated teeth (ETT) obturated with different kinds of bioceramic sealers used in combination with warm gutta-percha obturation techniques. Methods: A total of 210 endodontic treatments in 168 patients were performed. At baseline, 155 sample teeth (73.8%) showed symptoms (tenderness or pain to percussion) and 125 (59.5%) showed periapical radiolucency. Periapical radiolucency was present in 125 cases (59.5%); of these, 79 showed a lesion of 5 mm or bigger (63.2%) while lower than 5 mm in 46 cases (36.8%). Regarding ETT with radiolucency, 105 of them (84%) were in coincidence with their need for retreatment and the other 20 (16%) were necrotic teeth. The obturation techniques that were used in this study were: the continuous wave of condensation technique in 75% of cases, and carrier-based technique in 25%. Four bioceramic sealers were used: CeraSeal in 115 cases, BioRoot in 35 cases, AH Plus Bio in 40 cases, and in 20 cases, BIO-C SEALER ION. Preoperative and recall radiographs of the roots were each assigned a periapical index (PAI) score by 2 blinded, independent, and calibrated examiners. The teeth were divided into outcome categories based on the following classification: healed, unhealed, and healing. The healed and healing categories were classified as success, and the unhealed category was classified as failure on the basis of loose criteria. Minimum follow-up period was 18 months. Results: The overall success rate was 99%, with 73.3% healed, 25.7% healing, and 0.95% not healed. The success rate was 100% for initial treatment and 98.2% for retreatment. Fifty-four (N = 54) teeth showed ongoing healing. All of them were retreatment cases with periapical lesions. Regarding the success (healed and healing) versus not healed, no significant difference was found between teeth with or without periapical lesions (p < 0.05). A statistically significant difference in the distribution of healed, healing, and not-healed teeth was found between the groups of teeth with baseline lesions < 5 mm and >5 mm in diameter (p < 0.01) and those with sealer groups (p < 0.01). The success rate of used bioceramic sealers was not statistically significant different (99.1%, 100%, 97.5% and 100%, respectively, for CeraSeal, BioRoot, AH Plus Bio, and BIO-C SEALER ION). Nonetheless, the distribution of healed, healing, and not-healed teeth was different between teeth sealed with different materials (p < 0.01). From the findings of this clinical study, the following conclusion can be drawn: a correct filling of root canals made with warm gutta-percha technique combined with a bioceramic sealer allows a high success rate in endodontically treated teeth.

Analysis of physicochemical properties of endodontic sealers containing rhodamine B

The use of fluorescent dyes in microscopy studies is frequent. Therefore, it is important to investigate whether these compounds may alter the physicochemical properties of materials in which they are incorporated to avoid methodological biases. This study evaluated the physicochemical properties of two endodontic sealers containing dry or diluted rhodamine B. Six groups were evaluated: AH Plus and MTA Fillapex in their original composition and mixed with 0.1% dry or diluted rhodamine. Push-out test was applied to assess the bond strength to root dentin. ANSI-ADA No. 57 and ISO No. 6876:2012 specifications were followed to evaluate flowability, setting time, and solubility of the sealers. pH changes were assessed after 24 h, 7, and 30 days. Intergroup comparisons were analyzed by ANOVA complemented by Tukey's post-hoc test; comparisons among periods were analyzed by Wilcoxon and Friedman tests. The incorporation of dry rhodamine decreased the bond strength and prolonged the setting time of AH Plus. The incorporation of diluted rhodamine decreased the setting time and increased the flowability of MTA Fillapex. Diluted rhodamine promoted pH reduction of AH Plus after 24 h and dry rhodamine after 7 days. Rhodamine incorporation promoted pH reduction after 30 days for MTA Fillapex. Solubility was not affected. In conclusion, the incorporation of diluted rhodamine changed the properties of MTA Fillapex, and the incorporation of dry rhodamine changed the properties of AH Plus. Previous dilution of rhodamine did not severely compromise the physicochemical properties of AH Plus and may be suggested to assess its penetrability.

Does ultrasonic activation improve the bond strength and root canal filling quality of endodontic sealers?

This study aimed to investigate the effect of ultrasonic activation (UA) of three endodontic sealers on the bond strength to root dentin and root canal filling quality. Ninety six bovine incisors were instrumented and root canal filling was carried out using AH Plus (AP), Sealer Plus (SP), or Sealer Plus BC (BC), with or without UA (n=16/group). Two 1.5-mm slices were obtained from each root third. The first slice was subjected to push-out testing and failure mode analysis, while the second was observed under a stereomicroscope for filling quality assessment. Data were analyzed by Kruskal-Wallis, Mann-Whitney and Friedman tests (α=0.05). SP showed higher bond strength and fewer voids than BC in the apical third and when root thirds data were pooled. SP also had higher bond strength compared with AH Plus in the apical third. UA improved the bond strength when BC was used but did not affect the filling quality of any sealer. There were no significant differences between the ultrasonically activated sealers regarding bond strength and filling quality. When root thirds were compared, the bond strength was similar along the root, but there was a tendency to worsen filling quality, with more voids, in the apical segment. In conclusion, UA was effective in increasing the bond strength of the calcium silicate-based sealer but did not improve its filling quality. For the epoxy resin-based sealers, these properties were not affected by UA.

Present status and future directions: Hydraulic materials for endodontic use

BACKGROUND

Hydraulic materials are used in Endodontics due to their hydration characteristics namely the formation of calcium hydroxide when mixing with water and also because of their hydraulic properties. These materials are presented in various consistencies and delivery methods. They are composed primarily of tricalcium and dicalcium silicate, and also include a radiopacifier, additives and an aqueous or a non-aqueous vehicle. Only materials whose primary reaction is with water can be classified as hydraulic.

OBJECTIVES

Review of the classification of hydraulic materials by Camilleri and the literature pertaining to specific uses of hydraulic cements in endodontics namely intra-coronal, intra-radicular and extra-radicular. Review of the literature on the material properties linked to specific uses providing the current status of these materials after which future trends and gaps in knowledge could be identified.

METHODS

The literature was reviewed using PUBMED, and for each clinical use, the in vitro properties such as physical, chemical, biological and antimicrobial characteristics and clinical data were extracted and evaluated.

RESULTS

A large number of publications were retrieved for each clinical use and these were grouped depending on the property type being investigated.

CONCLUSIONS

The hydraulic cements have made a difference in clinical outcomes. The main shortcoming is the poor testing methodologies employed which provide very limited information and also inhibits adequate clinical translation. Furthermore, the clinical protocols need to be updated to enable the materials to be employed effectively.

Clinical Efficacy of Sealer-based Obturation Using Calcium Silicate Sealers: A Randomized Clinical Trial

INTRODUCTION

This randomized controlled clinical trial compared the clinical efficacy and outcome of a sealer-based obturation technique (SBO) with calcium silicate sealers and a continuous wave of condensation technique (CWC) with a resin-based sealer.

METHODS

Root canals were prepared using rotary instruments and 2.5% sodium hypochlorite. At the next visit, patients were enrolled and randomly assigned into 2 groups on the basis of the obturation protocol: CWC with AH Plus sealer and SBO with Endoseal TCS. Patients were assessed for the level of postoperative pain using a numeric rating scale. The quality of root canal obturation was evaluated in terms of the sealer extrusion, root-filling voids, and level of root filling. The participants were recalled after at least 6 months. Healing of the teeth was determined as a decrease in Periapical Index score and resolution of symptoms. The results were statistically compared by using the χ² test or Fisher exact test, followed by multivariate analysis with logistic regression.

RESULTS

A total of 74 teeth were included in the analysis (79% recalls), and the mean follow-up period was 17 months (6-29 months). Two groups expressed identical distribution of postoperative pain (P = .973) and similar quality of root canal obturation. The total success rates were 93.2% (CWC 92.3%, SBO 94.3%) by loose criteria and 60.8% (CWC 51.3%, SBO 71.4%) by strict criteria, with no significant differences between the 2 groups. The success rate by loose criteria in teeth with sealer extrusion was significantly lower than those in teeth without sealer extrusion (P = .049).

CONCLUSIONS

SBO using an Endoseal TCS could be a possible alternative to CWC using AH Plus. Sealer extrusion and postoperative pain were found to negatively impact prognosis of the endodontic treatment.

Effect of the several epoxy resin-based sealer compositions on adhesion interface in radicular dentin after calcium hydroxide intracanal medication removal

Background

This study evaluated the effects of several epoxy resin-based sealer compositions (AHP, AH Plus; ADS, Adseal; SPL, Sealer Plus) on bond strength and intratubular dentin penetration of the endodontic obturation, in root canal previously treated with calcium hydroxide intracanal medication (CH) and removed by continuous ultrasonic irrigation (CUI).

Material and Methods

Forty-five maxillary canines were prepared up to F5 (ProTaper system), filled with CH, coronally sealed, and stored at 37ºC. After 1 week, CH was removed using 2.5% sodium hypochlorite energized by CUI. The specimens were randomly distributed in three groups (n=15) and root canal obturated, according to epoxy-based resin sealer composition (AHP, ADS or SPL). The roots were transversally sectioned in cervical, middle, and apical thirds. In each radicular third, push out bond strength using universal machine and intratubular dentin using confocal laser scanning microscopy (CLSM) and Image J Program were evaluated. Bond strength and intratubular dentin penetration were statistically evaluated by ANOVA one-way and Tukey tests and Kruskal Wallis test, respectively (α = 0.05).

Results

In middle and apical thirds, AHP showed higher bond strength values (p<0.05), and ADS and SPL were similar each other (p>0.05). All epoxy resin-based sealers presented similar intratubular dentin penetration, independently of the radicular thirds (p>0.05). Cohesive and mixed failures were predominant in the cervical thirds. In the middle and apical thirds, AHP showed more cohesive type failures, while ADS and SPL showed more adhesive-type failures.

Conclusions

AHP has the highest bond strength in middle and apical radicular thirds, after calcium hydroxide intracanal medication removal using continuous ultrasonic irrigation, although intratubular dentin infiltration being similar among epoxy resin-based sealer with several chemical composition. Key words:Continuous ultrasonic irrigation, endodontic sealers, epoxy resin-based sealers, root canal obturation.

Effect of Different Irrigation Solutions on the Diffusion of MTA Cement into the Root Canal Dentin

(1) Aim: This study aims to analyze the in vitro infiltration of a silicate root canal sealer into dentinal tubules after using different endodontic irrigating solutions. (2) Methods: Twenty-nine teeth with single roots were separated into three groups according to the final irrigation protocol: G1 n = 10) = 17% EDTA (ethylenediaminetetraacetic acid) + 3.0% sodium hypochlorite (NaOCl), G2 (n = 10) = 17% EDTA + 2.0% chlorhexidine and G3 (Control group, n = 9) = 17% EDTA + saline solution. Root canals were filled using cold lateral compaction technique with MTA Fillapex sealer and gutta-percha. The sealer was labeled with rhodamine B. The teeth were segmented at the middle and third apical sections, which were visualized using 10× confocal laser microscopy to determine the sealer penetration percentage. (3) Results: In the apical section, no statistically significant differences were found between the groups regarding sealer penetration. In the middle section, Group 1 obtained the highest percentage, and Group 2 the lowest (p = 0.004). Group 1 also presented statistically significant differences in the Control Group (p = 0.031) and had close sealer penetration values. Meanwhile, the Control Group (p = 0.023) and Group 2 (p = 0.029) revealed a significant decrease of sealer penetration between the apical and middle sections. (4) Conclusion: The obtained results support that final irrigation with NaOCl promoted similar sealer penetration in the apical and middle sections. On the other hand, a significant decrease in the sealer penetration of the middle section was observed for the chlorhexidine and saline groups. Compared to other irrigant solutions, NaOCl promotes more uniform sealer penetration, which can correlate with better sealing and, consequently, higher endodontic treatment success.