Guided bone regeneration using chitosan-collagen membranes in dog dehiscence-type defect model

Biomimetic vascularized adipose-derived mesenchymal stem cells bone-periosteum graft enhances angiogenesis and osteogenesis in a male rabbit spine fusion model

Aims

Several artificial bone grafts have been developed but fail to achieve anticipated osteogenesis due to their insufficient neovascularization capacity and periosteum support. This study aimed to develop a vascularized bone-periosteum construct (VBPC) to provide better angiogenesis and osteogenesis for bone regeneration.

Methods

A total of 24 male New Zealand white rabbits were divided into four groups according to the experimental materials. Allogenic adipose-derived mesenchymal stem cells (AMSCs) were cultured and seeded evenly in the collagen/chitosan sheet to form cell sheet as periosteum. Simultaneously, allogenic AMSCs were seeded onto alginate beads and were cultured to differentiate to endothelial-like cells to form vascularized bone construct (VBC). The cell sheet was wrapped onto VBC to create a vascularized bone-periosteum construct (VBPC). Four different experimental materials - acellular construct, VBC, non-vascularized bone-periosteum construct, and VBPC - were then implanted in bilateral L4-L5 intertransverse space. At 12 weeks post-surgery, the bone-forming capacities were determined by CT, biomechanical testing, histology, and immunohistochemistry staining analyses.

Results

At 12 weeks, the VBPC group significantly increased new bone formation volume compared with the other groups. Biomechanical testing demonstrated higher torque strength in the VBPC group. Notably, the haematoxylin and eosin, Masson's trichrome, and immunohistochemistry-stained histological results revealed that VBPC promoted neovascularization and new bone formation in the spine fusion areas.

Conclusion

The tissue-engineered VBPC showed great capability in promoting angiogenesis and osteogenesis in vivo. It may provide a novel approach to create a superior blood supply and nutritional environment to overcome the deficits of current artificial bone graft substitutes.

Mesostructured Fibrils Exfoliated in Deep Eutectic Solvent as Building Blocks of Collagen Membranes

The mesoscale components of collagen (nanofibrils, fibrils, and fiber bundles) are well organized in native tissues, resulting in superior properties and diverse functions. In this paper, we present a simple and controlled liquid exfoliation method to directly extract medium-sized collagen fibers ranging from 102 to 159 nm in diameter from bovine Achilles tendon using urea/hydrochloric acid and a deep eutectic solvent (DES). In situ observations under polarized light microscopy (POM) and molecular dynamics simulations revealed the effects of urea and GuHCl on tendon collagen. FTIR study results confirmed that these fibrils retained the typical structural characteristics of type I collagen. These shed collagen fibrils were then used as building blocks to create independent collagen membranes with good and stable mechanical properties, excellent barrier properties, and cell compatibility. A new method for collagen processing is provided in this work by using DES-assisted liquid exfoliation for constructing robust collagen membranes with mesoscale collagen fibrils as building blocks.

Role of periosteum in alveolar bone regeneration comparing with collagen membrane in a buccal dehiscence model of dogs

To investigate the role of periosteum on the treatment of buccal dehiscence defects comparing with collagen membrane in canine model. Bilateral dehiscence-type defects at the buccal side on the distal root of the lower 3rd/4th premolars were created in six beagle dogs with a total of 24 defects and assigned into three groups: Group A: blood clot in an untreated defect; Group B: deproteinized bovine bone material (DBBM) covered with an absorbable membrane; Group C: DBBM covered with the periosteum. The structural parameters for trabecular architecture and vertical bone regeneration were evaluated. Histological and histomorphometric evaluation were carried out to observe new bone formation and mineralization in the graft site. Immunohistochemical analysis was performed to identify the expression of osteopontin (OPN) and osteocalcin (OCN) at postoperative 3 months. Group C achieved greater vertical alveolar bone gain than that of group A and group B. The periosteum-covered group showed significantly greater new bone formation and accelerated mineralization. The greater immunolabeling for OPN and OCN was observed in group C than in group A. Periosteal coverage has explicit advantages over collagen membranes for the quality and quantity of new bone regeneration in dehiscence defects repairing.

The Effects of Chitosan on the Healing Process of Oral Mucosa: An Observational Cohort Feasibility Split-Mouth Study

The healing process is a dynamic process accompanied by some classical symptoms of inflammation such as redness, swelling, pain, and loss of function. Chitosan is a natural polymer with properties that contribute to tissue healing, with properties that could be applied in periodontal therapy, such as the wound healing of oral mucosa. This experimental split-mouth study aims to assess the possibilities of chitosan influencing the healing process of oral mucosa in eight patients, where the studied group was subjected to two oral surgeries: one with chitosan hydrogel into the socket and other without the biomaterial. A semi-quantitative analysis of the data was performed. Some classic signs of inflammation in a short period of time were observed where chitosan acted, compared to the control. An absence of bleeding was observed in the chitosan cases. According to the literature, chitosan recruits and activates neutrophils and macrophages and stimulates angiogenesis. Hemostatic and antimicrobial activity of chitosan also play an important role in wound healing. Chitosan seems to improve the postoperative quality of patients, allowing rapid wound healing with less complications.

Chitosan-collagen-hydroxyapatite membranes for tissue engineering

Tissue engineering is growing in developing new technologies focused on providing effective solutions to degenerative pathologies that affect different types of connective tissues. The search for biocompatible, bioactive, biodegradable, and multifunctional materials has grown significantly in recent years. Chitosan, calcium phosphates collagen, and their combination as composite materials fulfill the required properties and could result in biostimulation for tissue regeneration. In the present work, the chitosan/collagen/hydroxyapatite membranes were prepared with different concentrations of collagen and hydroxyapatite. Cell adhesion was evaluated by MTS assay for two in vitro models. Additionally, cytotoxicity of the different membranes employing hemolysis of erythrocytes isolated from human blood was carried out. The structure of the membranes was analyzed by X-rays diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermal stability properties by thermogravimetric methods (TGA). The highest cell adhesion after 48 h was obtained for chitosan membranes with the highest hydroxyapatite and collagen content. All composite membranes showed good cell adhesion and low cytotoxicity, suggesting that these materials have a significant potential to be used as biomaterials for tissue engineering. Graphical abstract.

Development of a membrane for guided tissue regeneration: An in vitro study

Aim

The aim of this study was to develop an alternative low-cost membrane for use in guided tissue regeneration (GTR).

Setting and Design

In vitro study.

Methods and Material

In this study, a membrane prepared from a 335 mm sized opening nylon substrate, covered in aqueous resin derived from chitosan, was compared with a commercial material, a non-degradable expanded poly (tetrafluoroethylene). Nylon substrate samples 2.0 × 2.0 cm were covered by aqueous resin based on diluted chitosan solution into 1:05 or 1:10 by spin coating technique to produce from 06, 10, and 15 layers. The surfaces of these membranes were observed using optical microscopy. The physical properties were measured by hydration superficial energy measurements (ΔG) and a tensile test machine.

Statistical Analysis

Statistical analysis was performed using the Student's t test at a significance level of 5%, using the BioEstat 2.0 program.

Results

The Δ G values of the nylon membrane covered by the 1:05 of chitosan with 15 layers were close to the commercial membrane's Δ G values. The tensile strength values of the nylon membrane covered by the 1:05 of chitosan with 15 layers were higher than the commercial membrane's (115.826 MPa, P < 0.05).

Conclusion

Therefore, the membrane developed shows some favorable physical properties that could qualify it as a material candidate for use in guided tissue regeneration.

Effect of Calcium Precursor on the Bioactivity and Biocompatibility of Sol-Gel-Derived Glasses

This study investigated the impact of different calcium reagents on the morphology, composition, bioactivity and biocompatibility of two-component (CaO-SiO₂) glasses produced by the Stöber process with respect to their potential application in guided tissue regeneration (GTR) membranes for periodontal repair. The properties of the binary glasses were compared with those of pure silica Stöber particles. The direct addition of calcium chloride (CC), calcium nitrate (CN), calcium methoxide (CM) or calcium ethoxide (CE) at 5 mol % with respect to tetraethyl orthosilicate in the reagent mixture gave rise to textured, micron-sized aggregates rather than monodispersed ~500 nm spheres obtained from the pure silica Stöber synthesis. The broadening of the Si-O-Si band at ~1100 cm-1 in the infrared spectra of the calcium-doped glasses indicated that the silicate network was depolymerised by the incorporation of Ca2+ ions and energy dispersive X-ray analysis revealed that, in all cases, the Ca:Si ratios were significantly lower than the nominal value of 0.05. The distribution of Ca2+ ions was also found to be highly inhomogeneous in the methoxide-derived glass. All samples released soluble silica species on exposure to simulated body fluid, although only calcium-doped glasses exhibited in vitro bioactivity via the formation of hydroxyapatite. The biocompatibilities of model chitosan-glass GTR membranes were assessed using human MG63 osteosarcoma cells and were found to be of the order: CN < pure silica ≈ CC << CM ≈ CE. Calcium nitrate is the most commonly reported precursor for the sol-gel synthesis of bioactive glasses; however, the incomplete removal of nitrate ions during washing compromised the cytocompatibility of the resulting glass. The superior bioactivity and biocompatibility of the alkoxide-derived glasses is attributed to their ease of dissolution and lack of residual toxic anions. Overall, calcium ethoxide was found to be the preferred precursor with respect to extent of calcium-incorporation, homogeneity, bioactivity and biocompatibility.

Evaluation of the Effectiveness of Esterified Hyaluronic Acid Fibers on Bone Regeneration in Rat Calvarial Defects

Hyaluronic acid (HA) constitutes one of the major components of the extracellular matrix domain in almost all mammals. The aim of this study was to evaluate the regenerative capacity of HA matrix in rat calvarial bone defects and compare with those of different combinations of resorbable collagen membrane (M) and bovine-derived xenograft (G). Twenty-four 3-month-old male Sprague-Dawley rats weighing 200-250 g were included. Control group was created by leaving one defect empty from 2 critical size defects with 5 mm diameter formed in the calvarial bones of 8 rats. In the same rats, the other defect was treated with HA matrix alone. One of the 2 defects formed in other 8 rats was treated with HA+G and the other with HA+M. One of the 2 defects formed in the remaining 8 rats was treated with G+M and the other with HA+G+M. The animals were sacrificed at 4 weeks. Histologic, histomorphometric, and immunohistochemical analyses were performed. Both HA matrix alone and its combinations with G and M supported new bone formation (NBF). However, NBF was significantly greater in G+M and HA+G+M groups compared to control and HA alone (P<0.001). Bone morphogenetic protein-2 was expressed with varying degrees in all groups, without any difference among them. Within the limitations of the present study, HA matrix, used alone or in combination with G and M, did not contribute significantly to bone regeneration in rat calvarial bone defects.

Peri-implant diseases: a review of treatment interventions

The ideal management of peri-implant diseases focuses on infection control, detoxification of implant surfaces, regeneration of lost tissues, and plaque-control regimens via mechanical debridement (with or without raising a surgical flap). However, a variety of other therapeutic modalities also have been proposed for the management of peri-implantitis. These treatment strategies encompass use of antiseptics and/or antibiotics, laser therapy, guided bone regeneration, and photodynamic therapy. The aim of this article was to review indexed literature with reference to the various therapeutic interventions proposed for the management of peri-implant diseases.