Replacing Heavily Damaged Teeth by Third Molar Autotransplantation With the Use of Cone-Beam Computed Tomography and Rapid Prototyping

Characterizations of three-dimensional root morphology and topological location of mandibular third molars by cone-beam computed tomography

PURPOSE

This study aimed to delineate three-dimensional (3D) root morphology and topological locations of mandibular third molars (MTMs) by cone-beam computed tomography (CBCT) in a Chinese adult dental population.

METHODS

Adult patients with MTMs were retrospectively screened based on CBCT images at our institution between January 2018 and December 2019. Root morphology and spatial locations of these teeth were defined based on CBCT 3D images. Potential associations with epidemiological and clinical/radiological parameters were analyzed using Chi-square or Fisher exact test. Two-tailed P values less than 0.05 were considered statistically significant.

RESULTS

A total number of 2680 eligible patients (male/female:0.74; 35 ± 10 years old) with 4180 MTMs were enrolled. The majority of MTMs had 2 roots 3064 (73.30%), followed by 800 (19.14%) 1 root, 302 (7.22%) 3 roots, and 14 (0.33%) 4 roots. More than half of one-rooted MTMs were convergent, followed by club-shaped and C-shaped. Among MTMs with 2 roots, 2860 (93.34%) were M-D (mesio-distal) types. Most MTMs with 3 roots were M-2D (one root in mesial, two roots in distal) types, followed by 2M-D (two roots in mesial, one root in distal) types, and B-2L (one root in buccal, two roots in lingual) types. The presence of root configurations was significantly associated with the angulation, depth, and width classification in two-rooted MTMs (P < 0.05).

CONCLUSIONS

Although the morphology and spatial locations of MTMs vary greatly, our results from a large dental population reconfirm that most MTMs have two roots with mesial-distal type of spatial distribution.

Tooth Autotransplantation as an Alternative Biological Treatment: A Literature Review

Tooth autotransplantation is the treatment modality in which a tooth is transferred from one site to another in the same person. This technique has a history of centuries. However, it is not well-known or well-documented. Essential aspects of the clinical procedure, criteria for performing tooth autotransplantation, advantages, disadvantages, and complications are also discussed in the review. It has been a public health concern considering the prevalence of dental trauma in children, the financial burden of treatment, and the long recovery times associated with dental injuries. There is evidence that tooth autotransplantation is an effective method of restoring missing teeth, particularly for growing children. Even if autotransplantation fails, the soft tissue and bone conditions would likely still be suitable for subsequent implant treatment. Appropriate patient and tooth selection are essential to the technique's success. Other prognostic factors are also discussed. The findings from the available literature suggest that tooth autotransplantation is a viable and cost-effective technique. This paper discusses the literature and protocols the authors implemented for autotransplantation of the tooth.

Impacted maxillary canine with curved apex: Three-dimensional guided protocol for autotransplantation

INTRODUCTION

Maxillary canines play a crucial role in dental and facial aspect, arch expansion, and efficient occlusion. When surgical exposure measures cannot be executed or the patient does not agree to take the treatment, autotransplantation should be considered. The aim of this case report was to describe a novel surgical technique using virtually planned three-dimensional(3D)-printed templates for guided apicoectomy and guided drilling of the recipient site for an autotransplantation of an impacted maxillary canine with a curved apex.

METHODS

A 42-year-old male complaining of pain and increased mobility in the maxillary left primary canine came to the clinic. Autotransplantation of the impacted canine was completed using altered methods from guided implant surgery to manufacture 3D-printed templates. Following a full-thickness mucoperiosteal flap elevation, the surgical template for the guided osteotomy and apicoectomy was inserted. This 3D-printed guided allowed the clinician to perform a quick and precise removal of the curved apex, providing an atraumatic extraction of the impacted canine throughout the cyst. Three further 3D surgical guides for implant burs and a 3D replica tooth were printed to modify the recipient socket. After the final position, the tooth was semi-rigid splinted to the adjacent teeth.

RESULTS

Follow-up at 2 years showed complete regeneration of the palatal defect and remodeling of the bone surrounding the maxillary canine.

CONCLUSIONS

Digitally planned procedures can facilitate the complex execution of an autotransplantation reducing the treatment chair-time and the morbidity for the patient as well as increasing the predictability of the result.

Guided autotransplant of a first premolar to replace a maxillary ankylosed incisor using a custom-designed osteotome

BACKGROUND

Autotransplantation is a highly successful technique to replace ankylosed teeth. The authors propose a modified therapeutic approach to guide the autotransplant of an immature maxillary premolar using a tooth-shaped osteotome.

CASE DESCRIPTION

A 9-year-old boy reported an avulsion of his maxillary permanent left central incisor with a delayed replantation. An autotransplant of the immature maxillary right first premolar into the position of the affected tooth was planned. A surgical 3-dimensional guiding template and a tooth-shaped osteotome were manufactured to prepare the neo-alveolus (referring to the creation or modification of an alveolus to house the tooth) modification. Although the donor tooth was placed in the recipient socket with the buccal side of the root fully exposed, the transplant outcome was successful.

PRACTICAL IMPLICATIONS

The use of 3-dimensionally designed surgical osteotome could improve accuracy and surgical handling of a donor tooth autotransplant, even with substantial bone defects in the recipient site.

Guided tooth autotransplantation in edentulous areas post-orthodontic treatment

OBJECTIVE

Tooth autotransplantation with a complete root formation to replace one or more lost teeth is indicated as a cost-effective alternative to implants. The aim of this case report was to describe a successfully guided autotransplantation of a maxillary third molar with fully formed roots into a surgically created socket after orthodontic space opening.

CLINICAL CONSIDERATIONS

A guided autotransplantation of the maxillary left third molar into the missing maxillary left first molar site was chosen. After virtually orientating donor tooth to confirm its optimum fit, it was deemed necessary to open 4 mm the mesiodistal space. Following the orthodontic movement, a 3-dimensional (3D)-guiding template and a milled surgical guide were manufactured to allow the donor tooth to be transplanted exactly in the planned position. The 2-year follow-up periapical radiograph showed a continuous periodontal space with no signs of apical periodontitis or root resorption.

CONCLUSIONS

Virtual planning and 3D-printed tooth replica combined with guided surgery can simplify the autotransplantation technique for both the clinician and the patient, particularly when the socket has been completely created during surgery.

CLINICAL SIGNIFICANCE

Virtual digital planning, which can accurately calculate the exact space to open orthodontically before an autotransplantation, could prove essential to enhancing the precision of 3D placement of the donor tooth in the recipient site.

Use of computer-aided three-dimensional prototyping to surgically assist in tooth autotransplantation

Autotransplantation is a surgical technique in which a donor tooth belonging to the same individual is repositioned into a surgically prepared socket or site of previous tooth extraction. It is beneficial in patients with teeth affected by agenesis, trauma, significant caries, and in teeth in a non-restorable condition or prognostically poor due to other pathology. It is particularly useful in paediatric patients, as properly transplanted teeth have a vital periodontium that allows for continuous growth and functional adaptation leading to preservation of the alveolar ridge. Technological advances in rapid prototyping combined with three-dimensional (3D) computed tomography (CT) have the ability to revolutionise autotransplantation. Preoperative planning for atraumatic extraction of the donor tooth and precise preparation of the recipient site with a rapid prototyped surgical template of the donor tooth considerably reduces the extra-alveolar time, and also reduces manipulation of the root sheath and periodontal ligament, and related trauma. This case series demonstrates the efficient and successful autotransplantation of various types of teeth with the use of a rapid prototyped surgical template produced from 3D CT. The use of this technology is expected to refine the surgical technique and improve treatment outcomes.

Three-dimensional printing in medicine: a systematic review of pediatric applications

BACKGROUND

Three-dimensional printing (3DP) addresses distinct clinical challenges in pediatric care including: congenital variants, compact anatomy, high procedural risk, and growth over time. We hypothesized that patient-specific applications of 3DP in pediatrics could be categorized into concise, discrete categories of use.

METHODS

Terms related to "three-dimensional printing" and "pediatrics" were searched on PubMed, Scopus, Ovid MEDLINE, Cochrane CENTRAL, and Web of Science. Initial search yielded 2122 unique articles; 139 articles characterizing 508 patients met full inclusion criteria.

RESULTS

Four categories of patient-specific 3DP applications were identified: Teaching of families and medical staff (9.3%); Developing intervention strategies (33.9%); Procedural applications, including subtypes: contour models, guides, splints, and implants (43.0%); and Material manufacturing of shaping devices or prosthetics (14.0%). Procedural comparative studies found 3DP devices to be equivalent or better than conventional methods, with less operating time and fewer complications.

CONCLUSION

Patient-specific applications of Three-Dimensional Printing in Medicine can be elegantly classified into four major categories: Teaching, Developing, Procedures, and Materials, sharing the same TDPM acronym. Understanding this schema is important because it promotes further innovation and increased implementation of these devices to improve pediatric care.

IMPACT

This article classifies the pediatric applications of patient-specific three-dimensional printing. This is a first comprehensive review of patient-specific three-dimensional printing in both pediatric medical and surgical disciplines, incorporating previously described classification schema to create one unifying paradigm. Understanding these applications is important since three-dimensional printing addresses challenges that are uniquely pediatric including compact anatomy, unique congenital variants, greater procedural risk, and growth over time. We identified four classifications of patient-specific use: teaching, developing, procedural, and material uses. By classifying these applications, this review promotes understanding and incorporation of this expanding technology to improve the pediatric care.

Dental 3D-Printing: Transferring Art from the Laboratories to the Clinics

The rise of three-dimensional (3D) printing technology has changed the face of dentistry over the past decade. 3D printing is a versatile technique that allows the fabrication of fully automated, tailor-made treatment plans, thereby delivering personalized dental devices and aids to the patients. It is highly efficient, reproducible, and provides fast and accurate results in an affordable manner. With persistent efforts among dentists for refining their practice, dental clinics are now acclimatizing from conventional treatment methods to a fully digital workflow to treat their patients. Apart from its clinical success, 3D printing techniques are now employed in developing haptic simulators, precise models for dental education, including patient awareness. In this narrative review, we discuss the evolution and current trends in 3D printing applications among various areas of dentistry. We aim to focus on the process of the digital workflow used in the clinical diagnosis of different dental conditions and how they are transferred from laboratories to clinics. A brief outlook on the most recent manufacturing methods of 3D printed objects and their current and future implications are also discussed.

Comparison of 3D X-ray tomography with computed tomography in patients with distal extremity fractures

OBJECTIVE

To compare fracture detection, image quality, and radiation dose in patients with distal extremity fractures using 3D tomography and computed tomography (CT).

MATERIALS AND METHODS

IRB approval was obtained including informed consent for this prospective study from June to December 2016. Patients diagnosed with an acute fracture at CT were consecutively scanned on the same day using 3D tomography. Anatomical location (effected bone and location within the bone) and morphological characteristics of fractures (avulsion, articular involvement, mono- vs. multifragmented, displacement), visibility of bone/soft tissue structures, and image quality were assessed independently by two blinded readers on a 5-point Likert scale. Dose-length-product (DLP; mGy*cm) was compared between both modalities. Descriptive statistics, Wilcoxon signed rank test (P < 0.05), Student's t test (P < 0.05), and Cohen's kappa (κ) for interreader reliability were calculated.

RESULTS

In 46 patients (28 males; 18 females; mean age, 53 ± 20 years) with 28 hand/wrist and 18 foot/ankle examinations, 86 out of 92 fractures were diagnosed with 3D tomography compared with CT. No false-positive finding occurred at 3D tomography. The six missed fractures on 3D tomography were five avulsion fractures of the carpals/metacarpals or tarsals/metatarsals, respectively, and one nondisplaced fracture of the capitate. Interreader agreement of anatomical location and morphological characteristics was substantial to almost perfect for upper (κ = 0.80-0.96) and lower (κ = 0.70-0.97) extremity fractures. Visibility of bone and soft tissue structures and image quality were slightly inferior using 3D tomography compared with CT (upper extremity P < 0.001-0.038 and lower extremity P < 0.001-0.035). DLP of a comparable scan coverage was significantly lower for 3D tomography (P < 0.001) for both upper (3D mean, 19.4 ± 5.9 mGy*cm; estimated CT mean, 336.5 ± 52.2 mGy*cm) and lower extremities (3D mean, 24.1 ± 11.1 mGy*cm; estimated CT mean, 182.9 ± 6.5 mGy*cm). Even the highest DLP with 3D tomography was < 30% of the mean estimated CT dose of a comparable area of coverage.

CONCLUSION

Fracture assessment of peripheral extremities is reliable utilizing a low-dose 3D tomography X-ray system, with slightly reduced image quality.

Posterior tooth autotransplantation: a case series

Tooth autotransplantation is the technique of transplanting embedded, impacted or erupted teeth from one site into another in the same individual. Autotransplantation can provide a long-term, cost-effective and biological solution for adolescent patients with congenitally missing teeth or significantly compromised teeth when a suitable donor tooth is available. Successful autotransplantation of immature teeth can offer many advantages for a growing patient, including a normally functioning periodontium, proprioception and preservation of alveolar bone volume. Even in the event that an autotransplanted tooth does eventually fail, the bone and soft tissue conditions are likely to be conducive for subsequent implant treatment. Despite the significant physiological and cost-benefit advantages, tooth autotransplantation remains relatively underutilized, as the procedure is considered to be technique-sensitive. Although carefully considered individual case selection and surgical skill are the critical determinants for success, advances in three-dimensional computed tomography and rapid prototyping have the potential to simultaneously reduce the technique sensitivity and increase the predictability of the autotransplantation procedure. It is hoped that this case series will provide greater awareness and an appreciation of the tremendous value of autotransplantation for the management of patients with congenitally missing or significantly compromised posterior teeth.

Technology at the service of surgery in a new technique of autotransplantation by guided surgery: a case report

Background

The aim of this case report was to use a surgical technique for autotransplantation of tooth using virtually planned 3D printed surgical templates for guided osteotomy preparation of the recipient of donor tooth.

Case presentation

An 18-year-old male patient received autotransplantation of the right mandibular third molar to replace an included right second molar. This procedure was based on guided implant surgery methods by superimposition of DICOM files and 3D data sets of the jaws. In order to design a 3D-printed template with the aid of a fully digital workflow; the third molar was conserved in PRGF during the surgical procedure and the tooth socket was prepared with a template and the help of a 3D-printed donor tooth copy in order to prevent iatrogenic damage to the donor tooth. This template and replica were manufactured using 3D-printing techniques. The transplanted tooth was placed in infra-occlusion and fixed with a suture splint and root canal therapy was performed 15 days later. The intervention was be accomplished by performing preplanned virtual transplantations with guided osteotomies to ensure accurate donor tooth placement in the new recipient site. The 24 months follow-up showed physiological clinical and radiologic results compatible with healing periradicular tissues.

Conclusions

This approach enables the planning and production of a 3D printed surgical template using the latest diagnostic methods and techniques of guided implant surgery. These accurate virtually predesigned surgical templates and printed analogues of the donor tooth could facilitate autotransplantation, ensuring an atraumatic surgical protocol.

Autotransplantation of third molars with completely formed roots to replace compromised molars with the computer-aided rapid prototyping

OBJECTIVE

To describe a method to fabricate donor tooth replica to assist surgeons in preparation of recipient socket during tooth autotransplantation.

MATERIALS AND METHODS

A total of 28 compromised molars in 27 patients were transplanted with third molars using computer-aided rapid prototyping (CARP) technique. Surgery time and extra-alveolar time were documented. Postoperatively, the distance between cervix of transplanted tooth and the alveolar wall was measured. The degree of postoperative pain experienced was assessed with visual analog scale at day 1, 3, and 7.

RESULTS

From 28 clinical cases, the average extra-alveolar time and surgery time were 2.5 minutes (±1.3) and 44 minutes (±6.8), respectively. Postoperatively, the average distance between cervix of transplanted tooth and the alveolar wall was 0.87 mm (±0.15) at the mesial-cervix, 0.95 mm (±0.17) at the distal-cervix, 0.88 mm (±0.18) at the buccal-cervix, and 0.95 mm (±0.13) at the lingual-cervix. The value of visual analog scale score significantly decreased from day 1 to day 3.

CONCLUSIONS

CARP is a reliable technique for fabrication of tooth like surgical replicas in conventional autotransplantation.

CLINICAL SIGNIFICANCE

CARP technique minimized extra-oral time, reduced iatrogenic damage, and consequently increased the survival rate of tooth autotransplantation.

Computed Tomography versus Optical Scanning: A Comparison of Different Methods of 3D Data Acquisition for Tooth Replication

Objectives

The study aimed to compare the accuracy of different methods of data acquisition and data reconstruction and to assess their usefulness for 3D printing of tooth replicas.

Methods

3-dimensional models of molar and canine teeth obtain utilizing CBCT examination with different protocols, and optical scanning was compared with models derived from micro-computed (micro-CT) examination using Geomagic Studio Qualify software. A pairwise comparison of 3D models with analysis of standard deviation and the value of the mean distance of given surfaces was performed.

Results

Standard deviation and the value of the mean distance were lowest for optical scanning followed by CBC in high and standard resolution in all tested protocols. Models, obtained with high-resolution CBCT protocols, of teeth in and outside of alveolar bone showed similar average distance parameters, but standard deviation parameter was significantly lower for models of teeth scanned outside of the socket. Good surface representation on all models was seen at relatively smooth areas while in areas of high changes in the geometry CBCT based models performed inferiorly to those obtained from an optical scanner.

Conclusions

In case of teeth of noncomplicated texture, independently from a position (within or outside the alveolar socket), the high-resolution CBCT seems to be a sufficient method to obtain data for 3D printed tooth replica. Optical scanning performs better when a detailed replica is necessary.