Computer-Aided Surgical Simulation in Severe Atrophic Mandibular Fractures: A New Method for Guided Reduction and Temporary Stabilization Before Fixation

Streamlining complex mandibular fracture treatment: Integration of virtual surgical planning and short-segment drilling guides

This study aimed to evaluate the feasibility and accuracy of a combined virtual surgical planning (VPS) and short-segment drilling guides (SSDGs) workflow for the treatment of complex mandibular fractures. Consecutive patients with complex mandibular fractures underwent treatment using the VPS and SSDGs workflow from August 2020 to April 2022. Various mandibular landmarks were compared between the preoperative virtual surgical plan and postoperative data, including condylar distance (CoD), mandibular angle width (GoL-GoR), GoMeGo angle (∠GoL-Me-GoR), the difference in mandibular angles between the left and right sides (Δ∠Co-Go-Me), and the difference in length between the left and right mandibular body (ΔGo-Me). Additionally, preoperative preparation time and surgical duration were retrospectively analyzed and compared to conventional surgery. All 14 consecutive patients with complex mandibular fractures achieved successful reduction using the VPS and SSDGs workflow. Three-dimensional comparison revealed a mean deviation distance of 0.91 ± 0.50 mm and a root-mean-square deviation of 1.75 ± 0.47 mm between the preoperative designed mandible model and the postoperative mandible model. The percentage of points with deviation distances less than 2 mm, 1 mm, and 0.5 mm between preoperative and postoperative models were 78.47 ± 8.87 %, 60.02 ± 14.28 %, and 38.64 ± 15.48 %, respectively. There were no significant differences observed in CoD, GoL-GoR, ∠GoL-Me-GoR, Δ∠Co-Go-Me, and ΔGo-Me between preoperative virtual surgical planning and postoperative measurements. Furthermore, no significant differences were found in the injury-to-surgery interval, admission-to-surgery interval, and surgical duration between the workflow and conventional surgery. The combined VPS and SSDGs workflow proved to be an accurate and feasible method for treating complex mandibular fractures. It offers advantages such as minimal preoperative preparation time and the ability to precise transfer screw positions of the pre-bent reconstruction plate during surgery. This approach is particularly suitable for managing complex mandibular fractures.

Reducing Risks for Midface and Mandible Fracture Repair

The midface skeleton provides structural scaffolding to the middle third of the face. Complications associated with fracture repair in these regions can result from incomplete, inaccurate, or delayed assessment, poor initial and subsequent reduction and fixation, infection, uncontrolled hemorrhage, hardware failure and associated soft tissue injuries. A systematic approach to managing the patient with facial trauma that includes Acute Trauma Life Support principles, early reconstruction, and precise reduction and fixation is essential to reducing the short-term and long-term risks of complications.

Haptic-Assisted Surgical Planning (HASP) in a Case of Bilateral Mandible Fracture

Restoring normal skeletal anatomy in patients with complex trauma to the mandible can be difficult, the difficulty often increasing with an edentulous mandible. This study describes a case of a displaced edentulous bilateral mandibular fracture, which was preoperatively planned with the in-house haptic-assisted surgery planning system (HASP). A model of the virtually restored mandible was 3D-printed at the hospital and a reconstruction plate was outlined beforehand with the printed mandible as a template and served as a guide during surgery. This case suggests HASP as a valuable preoperative tool in the planning phase when dealing with maxillofacial trauma cases. With the application of virtual planning, the authors could analyze the desired outcome and were further supported in surgery by the guidance of the reconstruction plate outlined on the restored model of the mandible.

Computer-assisted preoperative planning of bone fracture fixation surgery: A state-of-the-art review

Background: Bone fracture fixation surgery is one of the most commonly performed surgical procedures in the orthopedic field. However, fracture healing complications occur frequently, and the choice of the most optimal surgical approach often remains challenging. In the last years, computational tools have been developed with the aim to assist preoperative planning procedures of bone fracture fixation surgery. Objectives: The aims of this review are 1) to provide a comprehensive overview of the state-of-the-art in computer-assisted preoperative planning of bone fracture fixation surgery, 2) to assess the clinical feasibility of the existing virtual planning approaches, and 3) to assess their clinical efficacy in terms of clinical outcomes as compared to conventional planning methods. Methods: A literature search was performed in the MEDLINE-PubMed, Ovid-EMBASE, Ovid-EMCARE, Web of Science, and Cochrane libraries to identify articles reporting on the clinical use of computer-assisted preoperative planning of bone fracture fixation. Results: 79 articles were included to provide an overview of the state-of-the art in virtual planning. While patient-specific geometrical model construction, virtual bone fracture reduction, and virtual fixation planning are routinely applied in virtual planning, biomechanical analysis is rarely included in the planning framework. 21 of the included studies were used to assess the feasibility and efficacy of computer-assisted planning methods. The reported total mean planning duration ranged from 22 to 258 min in different studies. Computer-assisted planning resulted in reduced operation time (Standardized Mean Difference (SMD): -2.19; 95% Confidence Interval (CI): -2.87, -1.50), less blood loss (SMD: -1.99; 95% CI: -2.75, -1.24), decreased frequency of fluoroscopy (SMD: -2.18; 95% CI: -2.74, -1.61), shortened fracture healing times (SMD: -0.51; 95% CI: -0.97, -0.05) and less postoperative complications (Risk Ratio (RR): 0.64, 95% CI: 0.46, 0.90). No significant differences were found in hospitalization duration. Some studies reported improvements in reduction quality and functional outcomes but these results were not pooled for meta-analysis, since the reported outcome measures were too heterogeneous. Conclusion: Current computer-assisted planning approaches are feasible to be used in clinical practice and have been shown to improve clinical outcomes. Including biomechanical analysis into the framework has the potential to further improve clinical outcome.

The Facial Reconstruction of a Mesolithic Dog, Muge, Portugal

This paper presents the facial reconstruction of a Mesolithic dog whose skeleton was recovered from the Muge shell middens (Portugal) in the 19th century. We used the anatomical deformation approach based on a collection of computer tomography images as an attempt to reconstruct the Muge dog’s head appearance. We faced a few challenges due to the level of bone displacement and the absence of some cranium anatomical parts, as well as accurate information on soft tissue thickness for modern dogs. This multidisciplinary study combined anatomical, veterinary, zooarchaeological, artistic and graphic aspects to allow for the facial reconstruction of the Muge dog. Albeit an approximation, it confers a recognition to this prehistoric finding.

Short-Segment Drilling Guides for the Management Comminuted Mandibular Fractures

ABSTRACT

Treatment of a severely comminuted mandibular fracture is challenging. This technical note describes a novel office-based workflow, combining virtual surgery planning with short-segment drilling guides. The authors reduced the comminuted mandibular fractures via virtual surgery planning. Then, the reconstructed mandible model was printed using an in-house 3D printer. Next, the reconstruction plate was preformed according to the shape of the mandibular model surface, and the position of the screw hole in the mandibular surface was determined. Finally, hand-made short-segment drilling guides for screw position transfer were fabricated with temporary resin. During the operation, the authors reset the guides for the drill to make screw holes as planned. After the hole was drilled, the pre-bent plate was applied to the mandible. The fracture was expected to be reduced, when tightening the screws. In our workflow, by using short and simple operative procedures, the authors were able to achieve precise reduction and reduce the operation time.

Application of Rapid Digital Locating Technology in Emergency Treatment of Maxillofacial Space Infection

ABSTRACT

Space infection occurs commonly in the oral and maxillofacial region, and is usually caused by odontogenic infection, resulting in acute symptoms through the maxillofacial space. If timely, correct, and effective treatment is not provided, local infection may quickly spread through the maxillofacial space and cause serious consequences such as suffocation, intracranial infection, and chest infection. A 55-year-old man visited our hospital with obvious swelling and pain in the right maxillofacial region. Maxillofacial computed tomography images showed revealed obvious low-density shadows on the inner side of the right mandibular angle and the right neck. Unlike the usual presentation of maxillofacial space infection, no obvious flushing or fluctuation was seen in the patient's maxillofacial region due to the deep location of the infection. Blind puncture examination and incision exploration may cause unnecessary pain and trauma to the patient. Therefore, to accurately position the infection focus, the operator reconstructed the infection cavity in three-dimensional with digital technology. The puncture point and incision site were quickly determined by three-dimensional measurement and the use of the compass and straightedge construction method, thereby achieving free drainage with an accurate and minimally invasive incision. Following 1 week of routine flushing and dressing changes, the patient recovered and was discharged from hospital. To our knowledge, this is the first precise minimally invasive treatment of a maxillofacial space infection conducted with the aid of digital positioning technology.