A Better Understanding of Unilateral Condylar Hyperplasia of the Mandible

Preauricular versus intraoral condylectomy for the treatment of unilateral condylar hyperactivity

In this study we retrospectively reviewed our clinic's treatment of unilateral condylar hyperactivity (UCH). We used computer-guided proportional condylectomy, which was conducted both through preauricular and intraoral approaches, then analysed the advantages and disadvantages of the two techniques. A computer-guided treatment algorithm is also presented. We enrolled 42 patients diagnosed with clinical asymmetry, with or without associated dentofacial deformities, which had been confirmed by single photon emission computed tomography (SPECT) to be UCH. These patients underwent proportional condylectomy: 26 of them had isolated proportional condylectomy, while 16 had proportional condylectomy with concomitant orthognathic surgery. The intraoral approach demonstrated a capacity and precision that was nearly equivalent to the extraoral approach. This mitigates the significant surgical risks associated with the extraoral approach, but it is important to acknowledge the learning curve associated with the intraoral approach. Utilising virtual surgical planning (VSP) and custom cutting guides is essential.

Characterizing the unseen: Clinical and radiographic perspectives on unilateral condylar hyperplasia

OBJECTIVES

Unilateral condylar hyperplasia (UCH), marked by progressive condylar growth, occurs between ages 11-30 with unclear etiology. This retrospective study aims to clarify the clinical, radiographic, and demographic features of UCH to improve its diagnosis and treatment.

MATERIAL AND METHODS

Data for all patients included in this study were retrieved from the archive. Inclusion criteria were the diagnosis of UCH supported by a positive bone scan above 10% of condylar uptake in SPECT/CT, the patient's history of progressive facial asymmetry, symptoms confirmed by the orthodontist during follow-up, and clinical and radiological evaluation. Demographic characteristics, along with volumetric and linear measurements, were statistically evaluated.

RESULTS

Forty-one patients were included in this study with 70.73% female predominance. Patients were classified as transverse and vertical type condylar hyperplasia (CH) according to their prominent asymmetry characteristics. Eighteen patients were classified as vertical type CH and 23 patients were classified as transverse type CH. Twenty had left-side condylar overgrowth, and 21 had right-side overgrowth. Condylar volume difference was significantly higher in vertical type CH patients compared to transverse type CH (p = 0.004). No correlation was found between growth rate (bone scan uptake ratio) and condylar volume difference in patients with vertical type and transverse type CH patients (p = 0.205).

CONCLUSION

Particularly in cases that exhibit a pronounced vertical growth tendency, volumetric and linear measurements can guide the timing and treatment planning process.

Accuracy of skeletal scintigraphy for the evaluation of mandibular growth disorders: a systematic review

Bone scans, reflecting blood flow and metabolic activity in a region of interest, are frequently used to evaluate mandibular growth disorders. Increased uptake is a non-specific finding and can occur as a result of multiple causes. The correlation between radioactive tracer uptake and growth activity has not been consistently demonstrated. The aim of this study was to assess the accuracy of planar skeletal scintigraphy (SS), single-photon emission computed tomography (SPECT), and SPECT with computed tomography (CT) images (SPECT/CT) in detecting abnormal mandibular growth activity compared to clinical and radiographic/tomographic methods (reference standard) and histologic findings. A systematic review was conducted following the PRISMA guidelines. Sensitivity, specificity, and accuracy were calculated for planar SS, SPECT, and SPECT/CT. Compared to the reference standard, SPECT/CT had the best diagnostic accuracy (76.5% sensitivity, 90.4% specificity, 83.2% accuracy), followed by planar SS (81.8% sensitivity, 84.5% specificity, 83.0% accuracy) and SPECT (77.7% sensitivity, 72.4% specificity, 74.5% accuracy). The results of this study indicate that SPECT/CT has the best clinical correlation, but the certainty of the evidence is low. The differences in sensitivity and specificity between the three index tests were not clinically significant. The three tests can be useful, with only a small difference in their diagnostic value. Histopathology was found not to be satisfactory as a reference standard.

A proposed protocol for correlation between bone density in hemimandibular hyperplasia radiography and histopathological findings - A retrospective study

The role of low-dose computed tomography (LDCT) in surgical planning can be assessed based on the correlation among bone density (BD/HU), radiographic values, and the histopathological appearance of hyperplastic overgrowth in mandibular condyles (hemimandibular hyperplasia/osteochondroma). The aim of this study was to evaluate the correlation between LDCT indices of bone-density measurements in surgical planning and histopathological specimens. The patients incuded in this study underwent detailed radiological evaluation as preparation for further clinical procedures. Excised condyles were evaluated in terms of bone density index using LDCT, and then histopathologically to investigate the accuracy of surgical procedures and set the basis for future surgical planning. An index value between both condyles' bone densities represented the relative difference between the healthy condyle and the side with hemimandibular hyperplasia (HH). Patients with unilateral condylar hyperplasia (UCH) showed a statistical correlation between condyle heads with increased bone density (BD) and scintigraphic (SCI) values (p < 0.001). On the other hand, correlation between BD and histopathological studies alone was significant (p < 0.001). With the increase in BD measured in HU in UCH condyles, the overall value of fibrous cartilage layer thickness decreased (p < 0.001). Furthermore, histopathological evaluation indicated that increased bone density on the UCH side resulted in increased total thickness (p > 0.001). The proposed index measurements in the mandibular condyles based on LDCT/BD can be used to estimate the degree of required surgical resection. Results from LDCT radiographic studies correlate with histopathological specimens more than scintigraphy.

Mineralization and thickness of the condylar cortex in skeletal remains of children's mandibles: A preliminary study

OBJECTIVE

To explore the relationship between the volumetric bone mineral density (vBMD), the thickness of the condylar cortex (Tcortex) and the hemimandibular volumes (Vhemimandible) of symmetrical and asymmetrical mandibles of children.

DESIGN

The data collection consisted of 92 archeological skeletal remains of children's mandibles between 1 and 12 years old. The mandibles were digitalized with a computed tomography (CT) scan, and three dimensional models were obtained. Vhemimandible was calculated using the optimal symmetry plane. The volumes were used to calculate the asymmetry index (AI). Mandibles with an AI of ≥ 3% (N = 9) and a sample of the most symmetrical mandibles (N = 9) were selected for this research. Three groups were created: a symmetrical, an asymmetrical and a pooled group. Micro-CT was used to measure the vBMD and Tcortex in four volumes of interest. The AI was calculated for these parameters as well.

RESULTS

Significant correlations were found between the vBMD and the Tcortex in the pooled group (P < .01) and between the AI of the vBMD and the AI of the Tcortex in the pooled (P < .01) and symmetrical group (P < .05). No significant correlations were found between the vBMD and the Vhemimandible and between the respective AIs. Between the Tcortex and the Vhemimandible a significant correlation was found in the pooled and asymmetrical group.

CONCLUSION

There is a relationship between the vBMD and the Tcortex. The correlations between the Tcortex and the Vhemimandible are insufficient to draw firm conclusions. A relationship between the vBMD and Vhemimandible was not confirmed in this study.

Evaluation of optimal single-photon emission computed tomography reference value and three-dimensional mandibular growth pattern in 54 Chinese unilateral condylar hyperplasia patients

BACKGROUND

The research aimed to evaluate the optimal Single-Photon Emission Computed Tomography (SPECT) cut-off value in differentiating condylar growth activeness, to observe 3-dimensional (3D) mandibular growth pattern, and to explore the potential correlation between 3D measurement parameters and SPECT uptake ratios in Chinese unilateral condylar hyperplasia (UCH) patients.

METHODS

 Data of fifty-four Chinese UCH patients were analyzed retrospectively. All patients underwent SPECT within 1 month before or after the first CT examination (CT1); and received a second CT examination at least 12 months later (CT2). Data from CT scans were analyzed by comparing bilateral differences between CT1 and CT2. The sensitivity and specificity of SPECT were calculated by the receiver operating characteristic (ROC) curve. Pearson's correlation analysis was performed to investigate whether the mandibular growth was correlated with SPECT value.

RESULTS

SPECT had a sensitivity of 68.00% and a specificity of 72.41%, with an area under the ROC curve being 0.709. The optimal SPECT cut-off value for evaluating condylar activity has been determined to be 13%. In patients with an active growing condyle, there was a significant increase in Co-Gn and Co-Go, but not in Go-Gn, Go-MF, or MF-Gn. Pearson's correlation analysis revealed no correlation between 3D measurement parameters and differences in relative condylar uptake ratios.

CONCLUSION

SPECT showed good diagnostic performance in UCH with the cut-off value of 13%. For those with an active growing condyle, the mandible grows diagonally and vertically, while the relative condylar uptake ratio was not directly related to mandibular growth.

"Proportional Condylectomy" for Vertical Condylar Hyperplasia Without Intermaxillary Elastics: Clinical Results and Patient Satisfaction

OBJECTIVES

First, to investigate the clinical outcome of 'proportional condylectomy' for patients with active unilateral condylar hyperplasia without complementary treatment by intermaxillary elastics and, second, to examine their level of satisfaction regarding function and esthetics.

STUDY DESIGN

A retrospective observational descriptive study was conducted. All patients included in the study suffered from active unilateral condylar hyperplasia with a vertical component. The length of the condylar-ramus unit was measured on both sides by an multidetector computed tomography scan. The difference was calculated and resected from the hyperplastic condyle during the operation. Facial, occlusal, and skeletal changes were evaluated using photographic and radiologic records, and a satisfaction questionnaire regarding function and esthetics was completed. P<0.05 was considered significant.

RESULTS

Fifteen patients were included in the study. The mean participants' age was 27.93±13.06 years, and the mean follow-up duration was 12.40±6.55 months. The mean chin deviation improved by 58.47% (P=0.001). Mean lip commissure plane tilt was improved by 61.31% (P=0.001). Six months postoperatively, all patients exhibited centered dental midlines (P=0.001). Occlusal plane tilt was significantly improved by 70.02% (P=0.001), and high patient satisfaction was recorded. Twenty-six percent (4/15) of patients did not require the complementary orthodontic treatment, and none of them required complementary orthognathic surgery.

CONCLUSIONS

'Proportional condylectomy' for patients with active unilateral vertical condylar hyperplasia without complementary treatment by intermaxillary elastics is a predictable procedure in terms of function and esthetics.

Micro-computed tomography evaluation of bone architecture in various forms of unilateral condylar hyperplasia

Condylar hyperplasia is one of the causes of facial asymmetry and malocclusion, characterized by enlargement of the lower jaw due to excessive condyle growth activity. The aim of this study was to use micro-computed tomography (micro-CT) to evaluate the bone architecture of the condylar head and determine whether there are differences between patients with various forms of unilateral condylar hyperplasia (UCH): hemimandibular hyperplasia, elongation, and mixed form. The cohort consisted of 28 patients with a mean age of 21.9 years. All patients underwent surgical treatment (condylar shaving) for active pathological growth activity. The portion of the condylar head removed was imaged by micro-CT and subsequently evaluated. Micro-CT imaging and semiquantitative and quantitative evaluation of the bone structure (percentage bone volume, surface density, trabecular thickness, trabecular separation, degree of anisotropy, and porosity of the subchondral bone) did not reveal significant differences between the individual types of condylar hyperplasia (P > 0.05). There were no significant differences in bone structure between the anterior and posterior portions of the condylar head. No statistically significant differences between individual groups of UCH were found in the micro-CT evaluation of the condylar head bone architecture.

Symmetry and Aesthetics in Dentistry

Animal bodies in general and faces in particular show mirror symmetry with respect to the median-sagittal plane, with exceptions rarely occurring. Bilateral symmetry to the median sagittal plane of the body also evolved very early. From an evolutionary point of view, it should therefore have fundamental advantages, e.g., more effective locomotion and chewing abilities. On the other hand, the recognition of bilaterally symmetric patterns is an important module in our visual perception. In particular, the recognition of faces with different spatial orientations and their identification is strongly related to the recognition of bilateral symmetry. Maxillofacial surgery and Dentistry affect effective masticatory function and perceived symmetry of the lower third of the face. Both disciplines have the ability to eliminate or mitigate asymmetries with respect to form and function. In our review, we will demonstrate symmetric structures from single teeth to the whole face. We will further describe different approaches to quantify cranial, facial and dental asymmetries by using either landmarks or 3D surface models. Severe facial asymmetries are usually caused by malformations such as hemifacial hyperplasia, injury or other diseases such as Noma or head and neck cancer. This could be an important sociobiological reason for a correlation between asymmetry and perceived disfigurement. The aim of our review is to show how facial symmetry and attractiveness are related and in what way dental and facial structures and the symmetry of their shape and color influence aesthetic perception. We will further demonstrate how modern technology can be used to improve symmetry in facial prostheses and maxillofacial surgery.