Impact of anionic substitutions on apatite structure and properties

Review of the Applications of Biomedical Compositions Containing Hydroxyapatite and Collagen Modified by Bioactive Components

Regenerative medicine is becoming a rapidly evolving technique in today's biomedical progress scenario. Scientists around the world suggest the use of naturally synthesized biomaterials to repair and heal damaged cells. Hydroxyapatite (HAp) has the potential to replace drugs in biomedical engineering and regenerative drugs. HAp is easily biodegradable, biocompatible, and correlated with macromolecules, which facilitates their incorporation into inorganic materials. This review article provides extensive knowledge on HAp and collagen-containing compositions modified with drugs, bioactive components, metals, and selected nanoparticles. Such compositions consisting of HAp and collagen modified with various additives are used in a variety of biomedical applications such as bone tissue engineering, vascular transplantation, cartilage, and other implantable biomedical devices.

Development of highly efficient bundle-like hydroxyapatite towards abatement of aqueous U(VI) ions: Mechanism and economic assessment

The exploration of emergency materials with ultra-fast adsorption rate and great adsorption capability of released U(VI) ions is essentially urgent. The present work successfully fabricated bundle-like hydroxyapatite (B-HAP) microstructures which composed of numerous nanorods by employing a facile and green method. The B-HAP was applied to treat the U(VI) containing wastewater. The abatement of U(VI) by B-HAP was very rapid and the saturated adsorption capacity was superior; over 96.7 % of U(VI) was abated within 5 min, and the maximum adsorption capacity was as high as to 1305 mg/g, signifying the feasibility and effectiveness of this B-HAP in the treatment of uranium-contaminated wastewater due to nuclear accidents. It is worthy to note that other ions in solution exhibited relatively low interference on its performance, indicating that B-HAP has great application potential to capture U(VI) from radioactive-contaminated wastewater as well. The U(VI) removal mechanism by B-HAP was confirmed with results from XRD, FT-IR and XPS. Chernikovite [H₂(UO₂)₂(PO₄)₂·8H₂O] was newly formed after U(VI) abatement by B-HAP. Economic assessment suggested B-HAP and its application on U(VI) abatement were cost-effective. With characteristics of high adsorption rate, large capacity, and strong antijamming ability, B-HAP has great application potential as an emergency treatment material for nuclear accidents.

Hydroxyapatite, a multifunctional material for air, water and soil pollution control: A review

Hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂), a calcium phosphate biomaterial, is a very promising candidate for the treatment of air, water and soil pollution. Indeed, hydroxyapatite (Hap) can be extremely useful in the field of environmental management, due in one part to its particular structure and attractive properties, such as its great adsorption capacities, its acid-base adjustability, its ion-exchange capability and its good thermal stability. Moreover, Hap is able to constitute a valuable resource recovery route. The first part of this review will be dedicated towards presenting Hap's structure and defining properties that result in its viability as an environmental remediation material. The second will focus on its use as adsorbent for wastewater and soil treatment, while indicating the mechanisms involved in this remediation process. Finally, the last part will impart all findings on Hap's applications in the field of catalysis, whether it be as catalyst, as photocatalyst, or as active phase support. Hence, all of the above will have served in showcasing the benefits gained by employing hydroxyapatite in air, water and soil clean-up.

Substitution effects of a carbonated hydroxyapatite biomaterial against intoxication chloride nickel-exposed rats

AIMS

This study aimed to investigate the potential effects of a synthetic apatite (carbonated hydroxyapatite) on the detoxification of a group of male "Wistar" rats exposed to nickel chloride.

METHODS

Toxicity was evaluated by rats' bioassay of nickel chloride. Wistar rats received this metal daily by gavage for seven days (4 mg/ml nickel chloride/200 g body weight, BW). To detoxify this organism, a subcutaneous implantation of the apatite is made.

RESULTS

The results revealed that exposure to nickel induced oxidative stress, disorders in the balances of ferric phosphocalcic, renal failures, liver toxicity and significant increase in nickel rates in the bones of intoxicated rats. The application of the carbonated hydroxyapatite presented in this study restored those disorders back to normal. The synthetic apatite protected the rats against the toxic effects of nickel by lowering the levels of lipid peroxidation markers and improving the activities of defense enzymes. It also amended ferric and phosphocalcic equilibriums, protected liver and kidney functions and reduced the nickel rate in the bones of the rats. Overall, the results provided strong support for the protective role of carbonated hydroxyapatite in the detoxification of rats exposed to nickel. Those beneficial effects were further confirmed by physico-chemical characterization (X-ray diffraction and infrared spectroscopy), which revealed its property of anionic and cationic substitution, thus supporting its promising candidacy for future biomedical application.

CONCLUSION

The hydroxyapatite is an effective biomaterial to solve health problems, particularly detoxification against metals (nickel).

Carbonate hydroxyapatite and silicon-substituted carbonate hydroxyapatite: synthesis, mechanical properties, and solubility evaluations

The present study investigates the chemical composition, solubility, and physical and mechanical properties of carbonate hydroxyapatite (CO₃Ap) and silicon-substituted carbonate hydroxyapatite (Si-CO₃Ap) which have been prepared by a simple precipitation method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray fluorescence (XRF) spectroscopy, and inductively coupled plasma (ICP) techniques were used to characterize the formation of CO₃Ap and Si-CO₃Ap. The results revealed that the silicate (SiO₄⁴⁻) and carbonate (CO₃²⁻) ions competed to occupy the phosphate (PO₄³⁻) site and also entered simultaneously into the hydroxyapatite structure. The Si-substituted CO₃Ap reduced the powder crystallinity and promoted ion release which resulted in a better solubility compared to that of Si-free CO₃Ap. The mean particle size of Si-CO₃Ap was much finer than that of CO₃Ap. At 750°C heat-treatment temperature, the diametral tensile strengths (DTS) of Si-CO₃Ap and CO₃Ap were about 10.8 ± 0.3 and 11.8 ± 0.4 MPa, respectively.

Phase transformations, ion-exchange, adsorption, and dissolution processes in aquatic fluorapatite systems

A synthetic fluorapatite was prepared that undergoes a phase transformation generated during a dialysis step. A surface layer with the composition Ca9(HPO4)2(PO4)4F2 is formed, which is suggested to form as one calcium atom is replaced by two protons. A surface complexation model, based upon XPS measurements, potentiometric titration data, batch experiments, and zeta-potential measurements was presented. The CaOH and OPO3H2 sites were assumed to have similar protolytic properties as in a corresponding nonstoichiometric HAP (Ca8.4(HPO4)1.6(PO4)4.4(OH)0.4) system. Besides a determination of the solubility product of Ca9(HPO4)2(PO4)4F2, two additional surface complexation reactions were introduced; one that accounts for a F/OH ion exchange reaction, resulting in the release of quite high fluoride concentrations (approximately 1 mM) that turned out to be dependent on the surface area of the particles. Furthermore, to explain the lowering of pHiep from around 8 in nonstoichiometric HAP suspensions to about 5.7 in FAP suspensions, a reaction that lowers the surface charge due to the readsorption of fluoride ions to the positively charged Ca sites was introduced: triple bond CaOH2++F-<-->triple bond CaF+H2O. The resulting model also agrees with predictions based upon XPS and ATR-FTIR observations claiming the formation of CaF2(s) in the most acidic pH range.