The use of organometallic transition metal complexes in the synthesis of shaped carbon nanomaterials

A review of the recent trend in the synthesis of carbon nanomaterials derived from oil palm by-product materials

Grown only in humid tropical conditions, the palm tree provides high-quality oil essential for cooking and personal care or biofuel in the energy sector. After the refining process, this demand could cause numerous oil palm biomass waste management problems. However, the emergence of carbon nanomaterials or CNMs could be a great way to put this waste to a good cause. The composition of the palm waste can be used as a green precursor or starting materials for synthesizing CNMs. Hence, this review paper summarizes the recent progress for the CNMs production for the past 10 years. This review paper extensively discusses the method for processing CNMs, chemical vapor deposition, pyrolysis, and microwave by the current synthesis method. The parameters and conditions of the synthesis are also analyzed. The application of the CNMs from palm oil and future recommendations are also highlighted. Generally, this paper could be a handy guide in assisting the researchers in exploring economic yet simple procedures in synthesizing carbon-based nanostructured materials derived from palm oil that can fulfill the required applications.

GRAPHICAL ABSTRACT

Controllable preparation of magnetic carbon nanocomposites by pyrolysis of organometallic precursors, similar molecular structure but very different morphology, composition and properties

Organometallic compounds were synthesized for solid-state pyrolysis to research the structure–property relationship between the precursors and the as-generated magnetic carbon nanocomposites.

Nitrogen/Carbon-Coated Zero-Valent Copper as Highly Efficient Co-catalysts for TiO2 Applied in Photocatalytic and Photoelectrocatalytic Hydrogen Production

Zero-valent copper (Cu⁰) is a promising co-catalyst in semiconductor-based photocatalysis as it is inexpensive and exhibits electronic properties similar to those of Ag and Au. However, its practical application in photocatalytic hydrogen production is limited by its susceptibility to oxidation, forming less active Cu species. Herein, we have carried out in situ encapsulation of Cu⁰ nanoparticles with N-graphitic carbon layers (14.4% N) to stabilize Cu⁰ nanoparticles (N/C-coated Cu) and improve the electronic communication with a TiO₂ photocatalyst. A facile solvothermal procedure is used to coat the Cu⁰ nanoparticles at 200 °C, while graphitization is achieved by calcination at 550 °C under an inert atmosphere. The resultant N/C-coated Cu/TiO₂ composites outperform the uncoated Cu counterparts, exhibiting a 27-fold enhancement of the hydrogen evolution rate compared to TiO₂ and achieving a rate of 19.03 mmol g^-1 h^-1 under UV-vis irradiation. Likewise, the N/C-coated Cu co-catalyst exhibits a less negative onset potential of -0.05 V toward hydrogen evolution compared to uncoated Cu (ca. -0.30 V). This superior activity is attributed to coating Cu⁰ with N/C, which enhances the stability, electronic communication with TiO₂, conductivity, and interfacial charge transfer processes. The reported synthetic approach is simple and scalable, yielding an efficient and affordable Cu⁰ co-catalyst for TiO₂.

Recent progress of magnetic nanomaterials from cobalt-containing organometallic polymer precursors

This review summarizes the recent progress in the syntheses and materials applications of Co-containing organometallic polymers, and mainly focuses on the preparation of magnetic nanostructures from Co-containing organometallic polymer precursors.

Fabrication of multi-level carbon nanotube arrays with adjustable patterns

Multi-level carbon nanotube (CNT) arrays with adjustable patterns were prepared by a combination of the breath figure (BF) process and chemical vapor deposition. Polystyrene-b-poly(acrylic acid)/ferrocene was dissolved in carbon disulfide and cast onto a Si substrate covered with a transmission electron microscope grid in saturated relative humidity. A two-level microporous hybrid film with a block copolymer skeleton formed on the substrate after evaporation of the organic solvent and water. One level of ordered surface features originates from the contour of the hard templates; while the other level originates from the condensation of water droplets (BF arrays). Ultraviolet irradiation effectively cross-linked the polymer matrix and endowed the hybrid film with improved thermal stability. In the subsequent pyrolysis, the incorporated ferrocene in the hybrid film was oxidized and turned the polymer skeleton into the ferrous inorganic micropatterns. Either the cross-linked hybrid film or the ferrous inorganic micropatterns could act as a template to grow the multi-level CNT patterns, e.g. isolated and honeycomb-structured CNT bundle arrays perpendicular to the substrate.

Dicarbonyl(η5-cyclopentadienyl)[2-(phenylsulfanyl)ethyl]iron(II)

The title compound, [Fe(C₅H₅)(C₈H₉S)(CO)₂], is a three-legged piano-stool iron(II) complex that is characterized by a thio­ethyl-linked phenyl ring and a cyclo­penta­dienyl moiety that occupies the apical coordination site. The two aromatic rings are essentially planar with the same maximum deviation of 0.009 Å. The mean planes of the phenyl and cyclo­penta­dienyl rings bis­ect at an acute angle of 50.08°.

Nanostructures on surfaces of the metalorganic compound {Fe2(CO)6[µ-S2C6H2(OH)2]} and its potential as catalyst precursor for the synthesis of carbon nanotubes

The compound {Fe(2)(CO)(6)[µ-S(2)C(6)H(2)(OH)(2)]} is organized by H-bond interactions on graphite and SiO(2) surfaces as micron-length nanofibres. Thermal degradation of these fibres adsorbed on SiO(2) leads to a very homogeneous surface filled with Fe(2)O(3) nanoparticles (ca. 2.5 nm diameter) suitable to produce few-walled carbon nanotubes laying on a clean surface.

Nanomaterials and the environment: a review for the biennium 2008-2010

Applications of nanotechnology are touching almost every aspect of modern life. The increased use of engineered nanomaterials (ENMs) in consumer products, chemical and medical equipment, information technology, and energy, among others, has increased the number of publications (informative and scientific) on ENMs. By the 1950s, very few papers were committed to nanomaterials (NMs), but in 2009, more than 80,000 journal articles included the concept nanotechnology. The objective of this review is to compile and analyze publications on NMs in the biennium 2008-2010. This review includes the most recent publications in risk assessment/toxicity, characterization and stability, toxicity, fate and transport of NMs in terrestrial ecosystems, and new ENMs. Carbon nanotubes, metallic, metal oxides and hydroxides nanoparticles, quantum dots, and polystyrene NPs are included.

Nitrogen Doped Carbon Nanotubes from Organometallic Compounds: A Review

Nitrogen doped carbon nanotubes (N-CNTs) have become a topic of increased importance in the study of carbonaceous materials. This arises from the physical and chemical properties that are created when N is embedded in a CNT. These properties include modified chemical reactivity and modified conductivity and mechanical properties. A range of methodologies have been devised to synthesize N-CNTs. One of the procedures uses a floating catalyst in which an organometallic complex is decomposed in the gas phase in the presence of a nitrogen containing reactant to give N-CNTs. Most studies have been limited to ferrocene, ring substituted ferrocene and Fe(CO)₅. This review covers the synthesis (and properties) of N-CNTs and other shaped carbon nanomaterials (SCNMs) produced using organometallic complexes. It summarizes the effects that physical parameters such as temperature, pressure, gas flow rates, type and concentration of N source etc. have on the N-CNT type, size and yields as well as the nitrogen content incorporated into the tubes that are produced from organometallic complexes. Proposed growth models for N-CNT synthesis are also reported.