Prospects of synthetic electrochemistry in the development of new methods of electrocatalytic fluoroalkylation

Electrochemical Insight into Mechanisms and Metallocyclic Intermediates of C-H Functionalization

Transition metal-catalyzed C-H activation has emerged as a powerful tool in organic synthesis and electrosynthesis as well as in the development of new methodologies for producing fine chemicals. In order to achieve efficient and selective C-H functionalization, different strategies have been used to accelerate the C-H activation step, including the incorporation of directing groups in the substrate that facilitate coordination to the catalyst. In this review, we try to underscore that the understanding the mechanisms of the catalytic cycle and the reactivity or redox activity of the key metal cyclic intermediates in these reactions is the basis for controlling the selectivity of synthesis and electrosynthesis. Combination of the electrosynthesis and voltammetry with traditional synthetic and physico-chemical methods allows one to achieve selective transformation of C-H bonds to functionalized C-C or C-X (X=heteroatom or halogen) bonds which may encourage organic chemists to use it in the future more often. The possibilities and the benefits of electrochemical techniques are analyzed and summarized.

Nano-architecture of silica nanoparticles as a tool to tune both electrochemical and catalytic behavior of NiII@SiO2

The present work introduces a facile synthetic route for efficient doping of [Ni^II(bpy)_x] into silica nanoparticles with various sizes and architectures. Variation of the latter results in different concentrations of the Ni^II complexes at the interface of the composite nanoparticles. The UV-Vis analysis of the nanoparticles reveals changes in the inner-sphere environment of the Ni^II complexes when embedded into the nanoparticles, while the inner-sphere of Ni^II is invariant for the nanoparticles with different architecture. Comparative analysis of the electrochemically generated redox transformations of the Ni^II complexes embedded in the nanoparticles of various architectures reveals the latter as the main factor controlling the accessibility of Ni^II complexes to the redox transitions which, in turn, controls the electrochemical behavior of the nanoparticles. The work also highlights an impact of the nanoparticulate architecture in catalytic activity of the Ni^II complexes within the different nanoparticles in oxidative C–H fluoroalkylation of caffeine. Both low leakage and high concentration of the Ni^II complexes at the interface of the composite nanoparticles enables fluoroalkylated caffeine to be obtained in high yields under recycling of the nanocatalyst five times at least.

The present work introduces a facile synthetic route for efficient doping of [Ni^II(bpy)_x] into silica nanoparticles with various sizes and architectures.

Opportunities and challenges for combining electro- and organometallic catalysis in C(sp2)-H phosphonation

The chemistry of organoelemental compounds including carbon-phosphorus derivatives is now one of the most rapidly developing fields of research, regarding both fundamental science and solution of applied problems. Extensive opportunities for the synthesis of organophosphorus compounds are opened up by the use of unconventional methods, first of all, electrochemical ones, which combine the benefits of usual homogeneous chemistry in solution and electrochemistry, where reactants are generated at the electrodes directly in the reaction system. The interest in the organic electrosynthesis is caused by several factors, including mild conditions (room temperature, atmospheric pressure), the possibility of conducting reactions in a closed system with a low concentration of the catalyst, which is readily regenerated. This mini-review generalizes the achievements in the field of development of new electrochemical, efficient and atom-economical, catalytic methods for the formation of aromatic carbon – phosphorus bonds and some historical background of these approaches.

Electrochemical strategies for C-H functionalization and C-N bond formation

Conventional methods for carrying out carbon-hydrogen functionalization and carbon-nitrogen bond formation are typically conducted at elevated temperatures, and rely on expensive catalysts as well as the use of stoichiometric, and perhaps toxic, oxidants. In this regard, electrochemical synthesis has recently been recognized as a sustainable and scalable strategy for the construction of challenging carbon-carbon and carbon-heteroatom bonds. Here, electrosynthesis has proven to be an environmentally benign, highly effective and versatile platform for achieving a wide range of nonclassical bond disconnections via generation of radical intermediates under mild reaction conditions. This review provides an overview on the use of anodic electrochemical methods for expediting the development of carbon-hydrogen functionalization and carbon-nitrogen bond formation strategies. Emphasis is placed on methodology development and mechanistic insight and aims to provide inspiration for future synthetic applications in the field of electrosynthesis.

Silica-supported silver nanoparticles as an efficient catalyst for aromatic C-H alkylation and fluoroalkylation

The efficient catalysis of oxidative alkylation and fluoroalkylation of aromatic C-H bonds is of paramount importance in the pharmaceutical and agrochemical industries, and requires the development of convenient Ag0-based nano-architectures with high catalytic activity and recyclability. We prepared Ag-doped silica nanoparticles (Ag0/+@SiO2) with a specific nano-architecture, where ultra-small sized silver cores are immersed in silica spheres, 40 nm in size. The nano-architecture provides an efficient electrochemical oxidation of Ag+@SiO2 without any external oxidant. In turn, Ag+@SiO2 5 mol% results in 100% conversion of arenes into their alkylated and fluoroalkylated derivatives in a single step at room temperature under nanoheterogeneous electrochemical conditions. Negligible oxidative leaching of silver from Ag0/+@SiO2 is recorded during the catalytic coupling of arenes with acetic, difluoroacetic and trifluoroacetic acids, which enables the good recyclability of the catalytic function of the Ag0/+@SiO2 nanostructure. The catalyst can be easily separated from the reaction mixture and reused a minimum of five times upon electrochemical regeneration. The use of the developed Ag0@SiO2 nano-architecture as a heterogeneous catalyst facilitates aromatic C-H bond substitution by alkyl and fluoroalkyl groups, which are privileged structural motifs in pharmaceuticals and agrochemicals.

A Ni(iii) complex stabilized by silica nanoparticles as an efficient nanoheterogeneous catalyst for oxidative C-H fluoroalkylation

We have developed Ni(III)-doped silica nanoparticles ([(bpy)xNi(III)]@SiO2) as a recyclable, low-leaching, and efficient oxidative functionalization nanocatalyst for aromatic C-H bonds. The catalyst is obtained by doping the complex [(bpy)3Ni(II)] on silica nanoparticles along with its subsequent electrooxidation to [(bpy)xNi(III)] without an additional oxidant. The coupling reaction of arenes with perfluoroheptanoic acid occurs with 100% conversion of reactants in a single step at room temperature under nanoheterogeneous conditions. The catalyst content is only 1% with respect to the substrates under electrochemical regeneration conditions. The catalyst can be easily separated from the reaction mixture and reused a minimum of five times. The results emphasize immobilization on the silica support and the electrochemical regeneration of Ni(III) complexes as a facile route for developing an efficient nanocatalyst for oxidative functionalization.

External oxidant-free cross-coupling: electrochemically induced aromatic C–H phosphonation of azoles with dialkyl-H-phosphonates under silver catalysis

A convenient external oxidant-free method of azole derivatives phosphorylation by dialkyl-H-phosphonates through electrochemical catalytic oxidation in the presence of silver salts (1%) is proposed.

Eco-efficient electrocatalytic C–P bond formation

The development of practical, efficient and atom-economical methods of formation of carbon-phosphorus bonds remains a topic of considerable interest for the current synthetic organic chemistry and electrochemistry. This review summarizes selected topics from the recent publications with particular emphasis on phosphine and phosphine oxides formation from white phosphorus, chlorophosphines in electrocatalytic processes using aryl, hetaryl or perfluoroalkyl halides as reagents. This review includes selected highlights concerning recent progress in modification of catalytic systems for aromatic C–H bonds phosphonation involving metal-catalyzed ligand directed or metal-induced oxidative processes. Furthermore, a part of this review is devoted to phosphorylation of olefins with white phosphorus under reductive conditions in water-organic media. Finally, we have also documented recent advances in ferrocene C–H activation and phosphorylation.

Unsymmetrical N-Aryl-1-(pyridin-2-yl)methanimine Ligands in Organonickel(II) Complexes: More Than a Blend of 2,2'-Bipyridine and N,N-Diaryl-α-diimines?

The new organonickel complexes [(R-PyMA)Ni(Mes)X] [R-PyMA = N-aryl-1-(pyridin-2-yl)methanimine; aryl = phenyl, 2,6-Me₂-, 3,5-Me₂-, 2,4,6-Me₃-, 2,6-ⁱPr₂-, 3,5-(OMe)₂-, 2-NO₂-4-Me-, 4-NO₂-, 2-CF₃-, and 2-CF₃-6-F-phenyl; Mes = 2,4,6-trimethylphenyl; X = F, Cl, Br, or I] were obtained as approximate 1/1 cis and trans isomeric mixtures or pure cis isomers depending on the PyMA ligand and X. The [(R-PyMA)Ni(Mes)X] complexes with X = Br or Cl were directly synthesized from the precursors trans-[(PPh₃)₂Ni(Mes)X], while [(PyMA)Ni(Mes)X] derivatives with X = F or I were obtained from [(PyMA)Ni(Mes)Br] through X exchange reactions. Although density functional theory (DFT) calculations show a preference for the sterically favored cis isomers, both isomers could be observed in many cases; in three cases, even single crystals for X-ray diffraction could be obtained for the trans isomers. Possible intermediates for the isomerization were investigated by DFT calculations. All complexes were studied by multiple spectroscopic means, electrochemistry, and spectroelectrochemistry (for the reduction processes). The long-wavelength metal-to-ligand charge-transfer (MLCT) absorptions vary markedly with the R substituent of the ligand and the cathodic electrochemical potentials to a far smaller degree. Both are almost invariable upon variation of X. All of this is in line with Ni-based and π*-based lowest unoccupied molecular orbitals (LUMOs). In line with the unsymmetric character of the N_Py^N_methanimine ligand, electrochemistry and MLCT transitions seem to not correspond to the same type of π* LUMO, making these PyMA ligands more interesting than the symmetric heteroaromatic polypyridine ligands such as 2,2'-bipyridine (bpy; N_Py^N_Py) and N,N-diaryl-substituted aliphatic α-diimines (N_methanimine^N_methanimine) such as the diaza-1,3-butadienes (DAB). First attempts to use these complexes in Negishi-type cross-coupling reactions were successful.

Denitrogenative hydrofluorination of aromatic aldehyde hydrazones using (difluoroiodo)toluene

(Difluoroiodo)toluene acts as both the oxidant and the fluoride source in this one-pot oxidation/denitrogenative hydrofluorination reaction.

Nanoheterogeneous catalysis in electrochemically induced olefin perfluoroalkylation

Immobilization of a (bpy)NiBr₂complex on silica nanoparticles decorated with anchoring amino-groups was used to perform Ni-catalyzed electroreductive olefin perfluoroalkylation.

Iron-catalyzed electrochemical C–H perfluoroalkylation of arenes

A new iron-catalyzed reaction for the coupling of perfluoroalkyl iodides with aromatic substrates is described.