A convenient route to a norbornadiene adduct of iridium with chelating phosphines, [Ir(R2PCH2CH2PR2)(NBD)][BAr4F] and a comparison of reactivity with H2 in solution and the solid–state

Mechanistic Insights into Molecular Crystalline Organometallic Heterogeneous Catalysis through Parahydrogen-Based Nuclear Magnetic Resonance Studies

The heterogeneous solid-gas reactions of crystals of [Rh(L₂)(propene)][BAr^F₄] (1, L₂ = ^tBu₂PCH₂CH₂P^tBu₂) with H₂ and propene, 1-butene, propyne, or 1-butyne are explored by gas-phase nuclear magnetic resonance (NMR) spectroscopy under batch conditions at 25 °C. The temporal evolution of the resulting parahydrogen-induced polarization (PHIP) effects measures catalytic flux and thus interrogates the efficiency of catalytic pairwise para-H₂ transfer, speciation changes in the crystalline catalyst at the molecular level, and allows for high-quality single-scan ¹H, ¹³C NMR gas-phase spectra for the products to be obtained, as well as 2D-measurements. Complex 1 reacts with H₂ to form dimeric [Rh(L₂)(H)(μ-H)]₂[BAr^F₄]₂ (4), as probed using EXAFS; meanwhile, a single-crystal of 1 equilibrates NMR silent para-H₂ with its NMR active ortho isomer, contemporaneously converting into 4, and 1 and 4 each convert para-H₂ into ortho-H₂ at different rates. Hydrogenation of propene using 1 and para-H₂ results in very high initial polarization levels in propane (>85%). Strong PHIP was also detected in the hydrogenation products of 1-butene, propyne, and 1-butyne. With propyne, a competing cyclotrimerization deactivation process occurs to afford [Rh(^tBu₂PCH₂CH₂P^tBu₂)(1,3,4-Me₃C₆H₃)][BAr^F₄], while with 1-butyne, rapid isomerization of 1-butyne occurs to give a butadiene complex, which then reacts with H₂ more slowly to form catalytically active 4. Surprisingly, the high PHIP hydrogenation efficiencies allow hyperpolarization effects to be seen when H₂ is taken directly from a regular cylinder at 25 °C. Finally, changing the chelating phosphine to Cy₂PCH₂CH₂PCy₂ results in initial high polarization efficiencies for propene hydrogenation, but rapid quenching of the catalyst competes to form the zwitterion [Rh(Cy₂PCH₂CH₂PCy₂){η⁶-(CF₃)₂(C₆H₃)}BAr^F₃].

A Plausible Mechanism for the Iridium-Catalyzed Hydrogenation of a Bulky N-Aryl Imine in the (S)-Metolachlor Process

The hydrogenation of N-(2-ethyl-6-methylphenyl)-1-methoxypropan-2-imine is the largest-scale asymmetric catalytic process for the industrial production of agrochemical (S)-metolachlor. The challenging hydrogenation across the sterically crowded carbon–nitrogen double bond was achieved using a mixture of [IrCl(COD)]₂, (R,S_Fc)-Xyliphos, NBu₄I and acetic acid. Acetic acid was critical in achieving excellent productivity and activity. Despite its industrial significance, a mechanism that explains how the sterically hindered bond in the imine is reduced has yet to be proposed. We propose a plausible proton-first, outer-sphere mechanism based on density functional theory calculations that is consistent with the experimentally observed activity and the enantioselectivity of the industrial process. Key findings include transition states involving acetate-assisted dihydrogen splitting, and a hydride transfer from a five-coordinate iridium trihydride directed by a C-H∙∙∙Ir interaction. This article was submitted to a Special Issue in honor of Professor Henri Kagan.

Inverse Isotope Effects in Single-Crystal to Single-Crystal Reactivity and the Isolation of a Rhodium Cyclooctane σ-Alkane Complex

The sequential solid/gas single-crystal to single-crystal reaction of [Rh(Cy₂P(CH₂)₃PCy₂)(COD)][BAr^F₄] (COD = cyclooctadiene) with H₂ or D₂ was followed in situ by solid-state ³¹P{¹H} NMR spectroscopy (SSNMR) and ex situ by solution quenching and GC-MS. This was quantified using a two-step Johnson–Mehl–Avrami–Kologoromov (JMAK) model that revealed an inverse isotope effect for the second addition of H₂, that forms a σ-alkane complex [Rh(Cy₂P(CH₂)₃PCy₂)(COA)][BAr^F₄]. Using D₂, a temporal window is determined in which a structural solution for this σ-alkane complex is possible, which reveals an η²,η²-binding mode to the Rh(I) center, as supported by periodic density functional theory (DFT) calculations. Extensive H/D exchange occurs during the addition of D₂, as promoted by the solid-state microenvironment.

Isolating reactive metal-based species in Metal-Organic Frameworks - viable strategies and opportunities

Structural insight into reactive species can be achieved via strategies such as matrix isolation in frozen glasses, whereby species are kinetically trapped, or by confinement within the cavities of host molecules. More recently, Metal-Organic Frameworks (MOFs) have been used as molecular scaffolds to isolate reactive metal-based species within their ordered pore networks. These studies have uncovered new reactivity, allowed observation of novel metal-based complexes and clusters, and elucidated the nature of metal-centred reactions responsible for catalysis. This perspective considers strategies by which metal species can be introduced into MOFs and highlights some of the advantages and limitations of each approach. Furthermore, the growing body of work whereby reactive species can be isolated and structurally characterised within a MOF matrix will be reviewed, including discussion of salient examples and the provision of useful guidelines for the design of new systems. Novel approaches that facilitate detailed structural analysis of reactive chemical moieties are of considerable interest as the knowledge garnered underpins our understanding of reactivity and thus guides the synthesis of materials with unprecedented functionality.

Solid-State Molecular Organometallic Catalysis in Gas/Solid Flow (Flow-SMOM) as Demonstrated by Efficient Room Temperature and Pressure 1-Butene Isomerization

The use of solid–state molecular organometallic chemistry (SMOM–chem) to promote the efficient double bond isomerization of 1-butene to 2-butenes under flow–reactor conditions is reported. Single crystalline catalysts based upon the σ-alkane complexes [Rh(R₂PCH₂CH₂PR₂)(η²η²-NBA)][BAr^F₄] (R = Cy, ^tBu; NBA = norbornane; Ar^F = 3,5-(CF₃)₂C₆H₃) are prepared by hydrogenation of a norbornadiene precursor. For the ^tBu-substituted system this results in the loss of long-range order, which can be re-established by addition of 1-butene to the material to form a mixture of [Rh(^tBu₂PCH₂CH₂P^tBu₂)(cis-2-butene)][BAr^F₄] and [Rh(^tBu₂PCH₂CH₂P^tBu₂)(1-butene)][BAr^F₄], in an order/disorder/order phase change. Deployment under flow-reactor conditions results in very different on-stream stabilities. With R = Cy rapid deactivation (3 h) to the butadiene complex occurs, [Rh(Cy₂PCH₂CH₂PCy₂)(butadiene)][BAr^F₄], which can be reactivated by simple addition of H₂. While the equivalent butadiene complex does not form with R = ^tBu at 298 K and on-stream conversion is retained up to 90 h, deactivation is suggested to occur via loss of crystallinity of the SMOM catalyst. Both systems operate under the industrially relevant conditions of an isobutene co-feed. cis:trans selectivites for 2-butene are biased in favor of cis for the ^tBu system and are more leveled for Cy.

An iridium–SPO complex as bifunctional catalyst for the highly selective hydrogenation of aldehydes

An Ir(iii) hydride catalytic system shows very high activities and selectivities in the chemoselective hydrogenation of various substituted aldehydes.