Deposited zirconocene chloride on silica-layered CuFe2O4 as a highly efficient and reusable magnetically nanocatalyst for one-pot Suzuki-Miyaura coupling reaction

A uniformly anchored zirconocene complex on magnetic reduced graphene oxide (rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2)) as a novel and reusable nanocatalyst for synthesis of N-arylacetamides and reductive-acetylation of nitroarenes

In this study, a crafted zirconocene complex on rGO@Fe3O4 as a novel magnetic nanocatalyst was synthesized and then characterized using FT-IR, SEM, EDX, VSM, ICP-OES, TGA, BET and MS analyses. Next, catalytic activity of the prepared nanocomposite rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) towards successful reduction of aromatic nitro compounds to arylamines using N2H4·H2O (80%) was investigated. The examined nanocatalyst also showed perfect catalytic activity for reductive-acetylation of aromatic nitro compounds to the corresponding N-arylacetamides without isolation of the prepared in situ amines using the N2H4·H2O/Ac2O system. Furthermore, acetylation of the commercially available arylamines to the corresponding N-arylacetamides was carried out by acetic anhydride in the presence of the rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) nanocomposite. All reactions were carried out in refluxing EtOH as a green solvent to afford the products in high yields. The obtained results exhibited that the nanocomposite of rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) showed a great catalytic activity in comparison to rGO and rGO@Fe3O4 as the parent constituents. Recovery and reusability of rGO@Fe3O4/ZrCp2Cl x (x = 0, 1, 2) were also examined for 8 consecutive cycles without significant loss of the catalytic activity. This establishes the sustainable anchoring of the zirconocene complex on the surface and mesopores of the rGO@Fe3O4 nanohybrid system.

Suzuki–Miyaura cross coupling reaction: recent advancements in catalysis and organic synthesis

Suzuki–Miyaura cross coupling reaction (SMCR) – A milestone in the synthesis of C–C coupled compounds.

Synthesis and Characterization of Copper (II) and Nickel (II) Immobilized on Silica- Coated Copper Ferrite: As Novel Magnetically Reusable Nano Catalysts Towards Reduction of Nitroarenes with NaBH4

AIM AND OBJECTIVE

Nowadays, the design, synthesis and application of magnetically nanocomposite systems have attracted the attention of numerous scientists. The huge surface area and magnetic characteristic of nanoparticles as well as the inherent potentiality of the used metal species, makes them susceptible to have different reactivity in chemical reactions. In this context, we therefore encouraged to prepare a new design of magnetic nanocatalysts as CuFe2O4@SiO2@AAPTMS@Ni(II) and CuFe2O4@SiO2@AAPTMS@Cu(II) followed by monitoring of their catalytic activities towards reduction of nitroarenes with NaBH4.

MATERIALS AND METHODS

Magnetically nanoparticles of CuFe2 O4@SiO2@AAPTMS@Ni(II) and CuFe2O4@SiO2@AAPTMS@Cu(II) were prepared through a four-step procedure: i) preparation of CuFe2O4 MNPs, ii) coating of CuFe2O4 nucleus by silica-layer using tetraethyl orthosilicate (TEOS), iii) layering of CuFe2O4@SiO2 MNPs with [3-(2-aminoethylamino)propyl] trimethoxysilane (AAPTMS), and iv) the complexation of CuFe2O4@SiO2@AAPTMS MNPs with an aqueous solution of Ni(OAc)2·4H2O or Cu(OAc)2·H2O.

RESULTS

The catalytic activity of CuFe2O4@SiO2@AAPTMS@Ni(II) and the Cu(II)-analogue towards reduction of nitroarenes with NaBH4 was studied. The examinations resulted that using a molar ratio of 1:2 for ArNO2 and NaBH4 in the presence of 20 mg of nanocomposites in H2O under reflux conditions reduces various aromatic nitro compounds to arylamines in high yields.

CONCLUSION

The immobilization of Ni(II) and Cu(II) species on silica-layered CuFe2O4 was investigated. Magnetically nanoparticles of CuFe2O4@SiO2@AAPTMS@Ni(II) and the Cu(II)-analogue showed the perfect catalytic activity towards reduction of nitroarenes with NaBH4 in H2O. All reactions were carried out within 2- 15 min to afford aniline products in high yields.

The Immobilized Copper on Nickel Ferrite: A Magnetically Superior Nanocatalyst for Chemoselective and Knoevenagel Synthesis of Bisdimedones and 1,8-Dioxo-octahydroxanthenes under Solvent-Free Conditions

AIM AND OBJECTIVE

Nowadays, bisdimedones and 1,8-dioxo-octahydroxanthenes are considered as biologically active materials. Due to this, the synthesis of the mentioned materials is the subject of more interest. Although most of the reported methods have their own merits, however, they generally require the use of expensive reagents, hazardous organic solvents, a tedious workup procedure and reduced recyclability of the applied catalyst system. Overcoming of the above mentioned drawbacks, therefore, encouraged us to investigate the capability of nanostructured NiFe2O4@Cu towards the synthesis of bisdimedones and 1,8- dioxo-octahydroxanthenes under green reaction conditions.

MATERIALS AND METHODS

Nanoparticles of NiFe2O4@Cu were prepared via a two-step procedure including the preparation of NiFe2O4 by solid-state grinding of Ni(OAc)2·4H2O and Fe(NO3)3·9H2O in the presence of NaOH followed by the immobilization of Cu(0) on the surface of NiFe2O4 nucleus via hydrazine hydrate reduction of Cu(NO3)2·3H2O.

RESULTS

After the synthesis of NiFe2O4@Cu, the catalytic activity of the Cu-nanocatalyst towards Knoevenagel reaction of aromatic aldehydes with dimedone under different reaction conditions was investigated. The examinations showed that using the molar equivalents of aromatic aldehydes (1 mmol) and dimedone (2 mmol) in the presence of 0.15 g NiFe2O4@Cu under solvent-free conditions chemoselectively afforded structurally different bisdimedone products at 60°C and 1,8-dioxo-octahydroxanthenes at 120°C.

CONCLUSION

In this study, magnetically, nanoparticles of NiFe2O4@Cu were prepared and then characterized using different analyses. The catalytic activity of the prepared Cu-nanocatalyst was also studied towards solvent-free Knoevenagel condensation of aromatic aldehydes with dimedone. All the reactions were carried out within 15-240 min to afford bisdimedone and 1,8-dioxo-octahydroxanthene products in high yields.

Sulfonyl-bridged (copper-immobilized nickel ferrite) with activated montmorillonite, [(NiFe2O4@Cu)SO2(MMT)]: a new class of magnetically separable clay nanocomposite systems towards Hantzsch synthesis of coumarin-based 1,4-dihydropyridines

In this study, the synthesis of a new class of magnetic clay-based nanocomposites by bridging of sulfonyl groups between copper-immobilized nickel ferrite (NiFe₂O₄@Cu) and activated montmorillonite is described. Synthesis of the clay nanocatalyst was carried out via the activation of montmorillonite by ClSO₃H to afford sulfonated montmorillonite. The modified montmorillonite was then reacted with copper-layered nickel ferrite to afford the magnetic clay nanocomposite [(NiFe₂O₄@Cu)SO₂(MMT)]. Next, the characterization of porous materials was carried out using scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller and vibrating sample magnetometer analyses. The obtained results showed that the clay nanocomposite containing a sulfonyl-bridge has a large surface area and magnetic properties versus the prepared one without the sulfonyl groups as (NiFe₂O₄@Cu)(MMT). The nanostructured clay had excellent catalytic activity towards the Hantzsch synthesis of coumarin-based 1,4-dihydropyridines via one-pot and three-component condensation of 4-hydroxycoumarin, aromatic aldehydes and ammonia. All reactions were carried out in water as a green and economic green solvent within 10–45 min to affords 1,4-DHPs in high to excellent yields. Reusability of the clay nanocomposite was investigated for six consecutive cycles without significant loss of catalytic activity. Based on this study, therefore, sulfonated montmorillonite could be considered an excellent support for the immobilization of magnetic materials.

In this study, the synthesis of a new class of magnetic clay-based nanocomposites by bridging of sulfonyl groups between copper-immobilized nickel ferrite (NiFe₂O₄@Cu) and activated montmorillonite is described.

Immobilized antimony species on magnetite: a novel and highly efficient magnetically reusable nanocatalyst for direct and gram-scale reductive-coupling of nitroarenes to azoarenes

In this study, magnetic nanoparticles of Fe₃O₄@SbFx were synthesized. Then, the catalytic activity of Fe₃O₄@SbFx MNPs was highlighted by one-pot reductive-coupling of aromatic nitro compounds to the corresponding azoarene materials with NaBH₄.

Simple and Practical Synthesis of Various New Nickel Boride-Based Nanocomposites and their Applications for the Green and Expeditious Reduction of Nitroarenes to Arylamines under Wet-Solvent-Free Mechanochemical Grinding

In this paper, we report a simple synthesis of four new nickel boride-based nanocomposites, namely Ni2B@ZrCl4, Ni2B@Cu2O, Ni2B@CuCl2 and Ni2B@FeCl3, from commercially available and cheap starting materials. All of the new Ni2B-based nanocomposites were well characterized by Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Further, the catalytic applications of these new nanocomposites were successfully evaluated in the wet-solvent-free reduction of aromatic nitro compounds to arylamines with sodium borohydride (NaBH4) at room temperature by a mechanochemical grinding technique. All the introduced catalytic systems provide excellent yields of arylamines in very short reaction times for a wide range of substrates. Also, recoverability and reusability of the new nanocomposites were investigated.